I have problem and I can't open http://localhost/reports. I get error "The request failed with HTTP status 400: Bad Request." When I try open page http://localhost/reportserver he open OK.
Hi, I have a report that is frustrating me. I've built this report, and it is not yet used in production. What it does is page break in places that I don't understand.
The FIRST area it would break after a line that had wrapped text to the line below. Even though there was plenty of room to fit it, and the entire rest of the group on the page.
The second area I honestly have NO idea why it breaks.
I am getting an error "An error occured during printing (0x80004005)" - when i am trying to print - and the i still am able to print - but only 1 page.
Thre registry key - Reporting services was not there - so i created it at
Hi,I am facing a problem with page breaking, I have PDF Reports,there i need to show particular data under one group ,when ever new group starts i need to show in new page,for this i took LIst Box Control, there i kept a Table.here the problem is In list Box Properties,i selected EDIT DETAILS GROUP, there i selected Page Break at End.Finally it is fine ;But giving page break when new group starts,at last it is giving Blank Page,any one can help me.......
I've installed Report Server 2005 Express on my XP Pro workstation. When I try to pring up the reports page (http://localhost/Reports) all I get is the following:
I've been trying to go through the Video training from MSDN, and followed the install as they did it, but my page won't come up. Very new to this so any and all help would be greatly apprecicated. My IIS knowledge is beginner.
I have a suite of several SSRS reports that differ essentially on the stored procedure called. All have very the same one-page header block and all have a footer. Those where a large number of pages are produced, page without fault when printed or converted to PDF.
Two page reports often break down on printing, so that page 1 only has the header and a footer and all the detail lines are printed on page2 (together with the footer). However on the screen the report paged correctly.
I have checked all the obvious problems such as page dimensions exceeding that of the print medium. (A series of such problems was fixed earlier in development.)
I have observed this behaviour with SQL2005 SP1 and SP2 (i.e. SP2 did not provide any fix in this area). The host OS for development and production is Windows 2003 server. The tests were done by viewing in IE6 and the fault only became apparent when going to print preview, printing or in PDF production.
This has the appearance of a bug in SSRS hereby intermediate length reports are not handled correctly. It appears to happen when the amount of detail lines just fills page 2. As soon as the report has sufficient lines to be 3 pages long (page 1 is header plus some details lines plus footer, page 2 is full of detail lines plus footer and page 3 is remaining detail lines plus footer then the problem is no longer seen! Where the detail lines will all fit on page 1, then the problem is not seen.
I observe this variation in behaviour since I am able to switch between different sized datasets and thus switch between the different scenarios described above. I should also note that the reports are in landscape mode.
I am integrating RS2005 reports with asp.net page(VS 2005).the scenario is that i have created a
home page with a button.when i clicked on button it redirect to another page which contain report viewer control.This control is linked with report server report.Although report is showing when i directly execute the page but when i execute the home page and clicked on button it gives messege
" The permissions granted to user 'GGNHTEL866ASPNET' are insufficient for performing this operation. (rsAccessDenied) "
although i have given full control to ASPNET on app folder and report server.
hi I have sql 2005 Standard on WinXP and i cant get http://localhost/ReportServer to work. I get the web page error Server Application Error The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance.
I have re-installed sql 2005, reinstalled IIS . I have run the aspnet_regiis -i and still nothing.
I have a master detail reports in one page. Master report displays all the products and details report shows their orders... What I want is, when user clicks on products graph its detail graph show the orders of that particular record on the same page. Both reports would remain visible on the same page side by side.
I am using SS 2005 RS. I am able to generate single page pdf reports by passing "id" as a parameter. Now I need to send multiple ids as parameter and generate one big report which would contain reports for all the ids supplied on separate pages. Is this possible? If yes, then how do i do this.
What I have tried so far is, I created new report with a list control and added single page report as a subreport to this list control and grouped this list control using id parameter. When i send multiple ids in the parameter, for example 3 ids, it generates 3 page report but only for the first id. So it generates report for the first id and repeats same report 3 times.
I am installing a new instance of SQL 2005 including reporting services and have a serious problem. All looks fine from the Reporting Services Configurations system, however, when attempting to browse to http://servername/reports I get an authentication challenge. All forms of credentials are rejected. The server is a Member server in the domain and SQL Server and the reporting services are installed on this server.
Any help would be appreciated as this is holding up the server installation and I have conducted exhaustive searches for a solution.
This problem is also reported in this thread, although, no solutions have been provided for a long time, so I am re-posting: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=560169&SiteID=1
I have one requirement. We have one application in banking and they have developer that application using c# and .Net code so For Business Users--when they enter their details and when they want to check Reports--it should take to a another UI or web page where Users will see all the reports--- and clicking the report he/she should be get able to export it into different formats..
i know that we can give report manager URL--but due to various issues-- we have choosen to built a web[age where they can see the reports work-flow:
so--user opens bank site--enters his details-goes into reports--it should open new webpage or UI, he should see all reports--he should export these reports..
After that based upon security levels each user can see their individual reports.
We really like using the Matrix reports, but we were finding that every Matrix report that we created would spawn an extraneous blank page. We tried putting the matrix in a rectangle, which works well for positioning other items on reports, but this had no effect on the problem.
Then we tried placing the matrix in a list with the list group details set to "=Nothing". It worked great - no more extra pages. Looked and didn't see this tip mentioned elsewhere so thought it might be worth sharing.
In SSRS reports i have multiple charts and tables. per page i have to display one chart and one table. How to put page break after the chart and table. I have not used rectangle. I created all the charts and tables in the body area.
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
I have created one reports but all the records are displaying on one page.find a solution to display the records page by page. I created the same report without group so the records are displaying in page by page.
Hello I have a project that uses a large number of MS Data access pages created in Access 2003 and runs on MS SQL2005.
When I am on lets say my client, (first page in a series) data access page and I have completed the fields in the (DAP), I am directing my users to the next step of the registration process by means of a hyperlink to another Data access page in the same web but in a linked or sometimes different table.
I need to pass data entered /created on the first page to the next page and populate the next page with some data from the first page / table. (like staying on the client name and ID when i go to the next page)
I also need the first data access page to open and display a blank or new record. Not an existing record. I will also be looking to creata a drop down box as a record selector.
Any pointers in the right direction would be appreciated. I am some what new to data access pages so a walk through would be nice but anything you got is welcome. Thanks Peter€¦
Hello SQL Server Experts, Data Analysts, and Report Writers et al:
re: Reporting Options with SQL Server
I wanted to propose an offshoot to the pryor thread:
Would anyone take a stab at comparing Access Reports, Crystal Reports, Cognos or other options to all the Reporting Services and its components offered as part ofSQL Server, especially as to extracting data from SQL Server into a report format?
I guess this is a far as capabilites, ease of use, limitations, and especially formatting or presentation of the end report product?
Thank you to all, and I hope this is a beneficial discussion to others.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
I have an already published application running several MS SQL Server 2000 Reporting Services report. I need a way to find from either the reporting services log or the application server (IIS) logs or windows log to know the frequency of each report being used.
Based on this info, the business needs to know which reports are being used and to what extend? How can I acheive this?
I have already got the IIS logs and it did not give the required info. I have looked into the Reporting Services logs but it does not provide the info either.
I can't find any explanation why is it string1 and string 2 of the footer section of my report displayed separately from the expression3 which is aligned on it and the rest of the object on the second page.
The expected design is that all Footer items should be displayed together of whether it is placed on the first page or on the last page.
As a workaround of this, I converted string 1 into an expression (Added = and enclosed the string with double quote).. As a result, all of the items in the Footer section are now placed together on the last page of the report.
I also remember one of the issue I encountered before where the Footer items where placed together on the first page and still have space at the bottom of the page, but then expression 6 is forced to display (alone) on the last page of my report.
I can't find any discussion related to this, I wish somebody could give me an idea why RS behaved like this.
Fit an intere table in same page without page break for save the excel export.
My table has a Group for order my dates.
I need to have the intere table in the same page, i don't care about blank space at the end of the page.
I can't use the page break beacuse i need an excel export in a unique sheet.. I have tested.. every page break..you'll have a different sheet in your excel export
Hello, If I have a report that includes a page header, the report viewer will render the report at the full width, but if I hide the page header and show only the body it will use the absolute width of the report.
I have a 7" wide report, with .75" borders set on each side.
Interactive & Print size are set to 8.5x11 Changing these sizes has no effect on the behavior of the viewer, which appears to ignore them.
When I view this report in the local viewer the contents fill the window if there is no page header. If I enable the page header then the report is drawn at 8.5" wide, leaving a _big_ white border on the right side. Any comments or workarounds that anyone knows? I know the local viewer is not a standard configuration (at least it seems) but it is what we need to use.Thanks,//Andrew