I am using typed data sets. When a certain line of C# code is reached, I get the following error message:
Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
Here is my source code. I altered the table to remove all contraints and primary keys, but I still get the error message. The error
occurs when the last line of code is reached. (_DeltaTable = myAdaptor.GetData();) The code is listed below. Does anyone know what
is going on?
calculateValuesAndAveragesTableAdapters.FundamentalsTableAdapter myAdaptor =
new calculateValuesAndAveragesTableAdapters.FundamentalsTableAdapter();
calculateValuesAndAverages.FundamentalsDataTable _DeltaTable;
_DeltaTable = myAdaptor.GetData(); // Error occurs on this line
Hello,I'm using a typed dataset to access my database (SQL Express); I have a table that returns data, which two fields are null; I'm getting this error:{"Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints."}There are no foreign-key or unique key constraints, so it has to be a non-null issue; I changed the two fields in the table to have a null value of Empty instead of Throw Exception, but I don't understand what the problem is coming from... I'm at a loss.Thanks.
I would like to extact data from a source system even if it has errors. Then I can transform it and handle the errors in the appropriate manner. Are there any loosely-typed Data Flow Destinations?
Hi all,I am using a Strongly Typed DataSet (ASP.NET 2.0) to insert new data into a SQL Server 2000 database, types of some fields in db are nvarchar. All thing work fine except I can not insert unicode data(Vietnamese language) into db.I can't find where to put prefix N. Please help me!!!
I am getting the message ("string or binary data would be truncated") when trying to update a field in a table in my database, but am unclear as to why. I understand that the error usually occurs when the length of a string exceeds the limit allowed for a field in the database, but in this situation, that constraint should not apply. The length of the field for which I am trying to make the update is a varchar field of length 100. The value for which I am attempting to update is an e-mail address of length 42 of the format xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx@yahoo.com. The initial insertion of the value (via my website) succeeded in inserting the first 40 characters of the address, but cut off the "om" at the end. It doesn't seem to matter how large I make the field in the database as it always gives me this error when I try to make the update. I have tried to change the value in both Query Analyzer and Enterprise Manager, but I invariably receive the same error.Any ideas?
I want my users to submit there email address and username to my Sql Database, but i want to prevent them from adding already existed usernames to my table.
I have a usernametextbox and emailtextbox and a Submit button. How do i check in my table before Submiting?
I get the below error message, but how can I find the actual line that has this problem. It does not give me the name of the field or correct line number.
I wrote a data mining plug-in algorithm in SSAS and now I am trying to view the lift chart in Management Studio. The studio gives the following error:
"The Data Mining Query builder control cannot be initialized due to the following problem: Deserialization failed: Multiple definition of element 'Column12' causes the content model to become ambigious. A content model must be formed such that during validation of an element information item sequence, the particle contained directly, indirectly or implicitly therein with which to attempt to validate each item in the sequence in turn can be uniquely determined without examining the content or attributes of that item, and without any information about the items in the remainder of the sequence."
I really do not understand what i did wrong. Can anybody help me?
I have an error message I was wondering if anyone else has seen and resolved. When I open excel and click on the query wizard on the Data Mining Ribbon, I get an error message that says "Input String not in Correct Format"
After I close this dialog box the 'Welcome to Query .... ' wizard will open, but when I select the Advance button my process aborts due to the input string error.
I have only ran association models on the computer.
The Manage Models and Browse buttons work fine.
The error came up on Friday, but it wasn't there on Thursday. There were no changes done to the machine (no installation of new software).
I have tried reinstalling the add-in.
Thank you all for your help,
Davy
I have pasted the SQL syntax below that I get from the error dialog box after the query wizard closes.
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SqlServer.DataMining.Office.Excel.QueryBuilder.QueryBuilderParameters.UpdateNestedColumnName() at Microsoft.SqlServer.DataMining.Office.Excel.XLClientUIManager.DisplayAdvancedQueryBuilder(Object sender, WizardPageEventArgs e) at Microsoft.SqlServer.DataMining.Office.Excel.Wizard.WizardPageBase.OnWizardPageAdvanced(WizardPageEventArgs e) at Microsoft.SqlServer.DataMining.Office.Excel.Wizard.WizardForm.btnAdvanced_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
Hi, I'm trying to do insert some data to the database through typing the a number in a textbox. But i will get this error message whenever i tried putting a number that will be inserted to the database. Sorry that the codes are quite messy. Please do let me know which part of the coding contains the errors. Please help me. Thanks. Server Error in '/WSD Project - Cam-Mart' Application.
String or binary data would be truncated.The statement has been terminated. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: String or binary data would be truncated.The statement has been terminated.Source Error:
Line 26: Line 27: Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click Line 28: SqlDataSource2.Insert() Line 29: Response.Redirect("Checkout.aspx") Line 30: Source File: C:Documents and SettingsAdministratorDesktopWSD Project - Cam-MartOrder.aspx.vb Line: 28 Stack Trace:
Protected Sub add_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles add.Click SqlDataSource2.Insert() Response.Redirect("Checkout.aspx") End Sub Protected Sub Back_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Back.Click Response.Redirect("Catalogs.aspx") End Sub Protected Sub checkout_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles checkout.Click Response.Redirect("Checkout.aspx") End Sub End Class
Dear All,I have written an update trigger that should write a message to an audittable When I try to update any field in the table I recieve the followingerror message -[ODBC Sql Server Driver] [Sql Server] Stirng or Binary data would betrunicated[ODBC Sql Server Driver] [Sql Server] The statement has been termined.I have looked and what has been suggested is to use the response.write len()to check the length of field that I am updating. Being fairly new toSQL-Server, I do not know how to do this. Any help will be most welcome.Thanks,Jeff
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I have an app running Windows CE 5.0 and SqlServerCE 3.0. Occasionally, one of the production units will throw an exception with the following stack trace but no exception message:
Exception Msg:
Stack Trace: at System.Data.SqlServerCe.SqlCeCommand.ProcessResults() at System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan() at System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand() at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader() at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader() at XX.MobileApp.frmXXX.LoadData()
This is not something that I have been able to reproduce in our shop. I even take their database and run it here in our shop with out such errors. Does anyone know some possible causes for this error?
Sorry, I don't have more info to give becuase this is all I have to work with since I cannot reproduce in our shop. If the exception object exposes a property for the HResult, I would be able to provide that.
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine. CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red ELSE '3' --White END END else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
I have a old report that was pointing to a different database, and i changed the connection string for that report and changed the field names (As per my new stored Procedure). In some places I keep getting this run time error, i have tried looking for all the hidden references to this field and i cannot find any parameter that the old database had. The error messages that i get are as follows:
[rsFieldReference] The Hidden expression for the table €˜tblContactInfo€™ refers to the field €˜PL_Admin_ShowInKit€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
[rsFieldReference] The Hidden expression for the table €˜tblContactInfo€™ refers to the field €˜PL_FA_ShowInKit€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
[rsFieldReference] The Hidden expression for the table €˜tblWithdrawals€™ refers to the field €˜PW_Comment€™. Report item expressions can only refer to fields within the current data set scope or, if inside an aggregate, the specified data set scope.
Can Someone please help me out as to how should i get rid of these error messages, they are kinda driving me nuts.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database: NOTE: In my database I have create the user “teeluk12� and a role “members�
Trying to connect to remote server croaktoad.simpli.biz I have SQL 2005 Developer on XP SP2 , I have disabled my windows firewall. I can ping to my server (croaktoad.simpli.biz) and i get no error message. My remote connection using both TCP/IP and named pipes are checkeed. My SQL Server Browser is running as well.
However when I try to connect using Managment Studio or running SQLCMD /Scroaktoad. simpli.biz /E I get the following error message
C:sqlcmd /Scroaktoad.simpli.biz /E HResult 0x52E, Level 16, State 1 Named Pipes Provider: Could not open a connection to SQL Server [1326]. Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.. Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired
So I've read all the forums for past 2 days and tried everything, nothing changed Any ideas?
Is it possible to return typed data in an Endpoint for an ASP.Net Web Reference to Proxy? If so, is there any specific terminology I should be aware of to target my search?
I realize there is a choice between Object (returns a dataset or error) or dataset, but the automatically generated WebReference Proxy in ASP.Net (2.0) is untyped and we can't change the typing there as you have to remove the entire WebReference to pick up new WebMethods (or changes to signitures I'd assume).
I'm able to create my own typed proxy as a psuedo-DAL assembly which takes the WebReference and cast rows/objects into typed rows/objects one at a time, but this seems like a lot of work and probobly not the best practice.
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed. --------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
I have a DAL that uses Typed DataSets (not directly, the DAL references and calls the dataset methods) and I am receiving a "There is already an open DataReader associated with this Command which must be closed first." error when I render an ASP.NET page where two imgs need to retrieve two different versions of an image (a thumbnail and a full sized image).I am using SQL Server 2005, ASP.NET 2.0, and my connection string includes the MARS attribute set to true. This is the method in the SqlServer DAL, _images is a typed table adapter:public override Image SelectImage(Guid? id) { // TODO: Find out why MARS feature isn't working! DataSet.ImageDataTable dt = _images.SelectImageById(id); <-- Exception occurs here if ((dt != null) && dt.Count == 1) { DataSet.ImageRow row = dt[0]; Guid? keyId = null; if (!row.IsKeyIdNull()) { keyId = row.KeyId; } // Success return new Image(row.Id, keyId, row.Path, row.Caption); } return null; } // This is the method that is called for both images, which calls the DALpublic class EntitySearch{ public static Image ImageById(Guid id) { return _dal.SelectImage(id); }}// These are the code-behind methods that the image response strings will come from...imgThumbnail.ImageUrl = String.Format("../Services/ImageBroker.aspx?img={0}&mode=Thumbnail", image.Id);imgFullImage.ImageUrl = String.Format("../Services/ImageBroker.aspx?img={0}&mode=Image", image.Id); // And finally here is the code in the broker class that saves the images to the response streamImage image = EntitySearch.ImageById(imageId);using (Picture picture = (mode == ImageMode.Image) ? image.Picture : image.Thumbnail){ Picture.Save(response.OutputStream, ImageFormat.Jpeg);}So the final snippet of code is being called twice, and it crashes. I have tried closing the connection and reopening it as a workaround but this only yields strange results, though it intermittently does load the images.Can anyone spot the issue?
Hi, Is there any work around to passing a set of strings to a parameter in a Typed Dataset for example I am pasing '4226222172004','4212012182004' which I build on my code the number of items will vary passed on the user selection but since the Typed Dataset uses sp_executesql and the parameters are change to '''4226222172004'',''4212012182004''' Any ideas how I can format the Parameter I am passing.so that it will end like where in ( '4226222172004','4212012182004') instead of where in ('''4226222172004'',''4212012182004''') I again the number of parameters will very. Thanks Julio D
I dragged two tables into the dataset designer. And I have a query with a resultset over both of the tables (joined).Is there ANY way I can have a strongly typed datatable out of the resultset?The automatically created dataset adapters won't allow me to create a tableadapter or datatable for the joined resultset but for one single table at a time only.Any solution to that? Theoretically it should be possible since I don't "lose" any type information with a join.. why can't I have a strongly typed datatable over the resultset?The join is not very sophisticated. In fact it couldn't be any more simple.(I'm refering to my previously posted question at http://forums.asp.net/t/1220481.aspx)
When I insert the fields using parameters, the params look like this: paramValues(10) = New SqlParameter("@RegHrs", SqlDbType.Decimal) paramValues(11) = New SqlParameter("@OTHrs", SqlDbType.Decimal) paramValues(12) = New SqlParameter("@TotHrs", SqlDbType.Decimal)
The fields in the SQL table are defined as: RegHrs - decimal (9,2) OTHrs - decimal (9,2) TotHrs - decimal (9,2)
Before I insert the row (from w/in the VB code), I stop the code and verify that the values being placed into the params are: 5.85 0 5.85
After the SQL insertion, the values w/in the SQL Table contain: 6 0 6
I'm looking to serialize some NVP data into an XML blob. I plan to put a primary xml index on the column, but my question is, would putting an XSD on the column speed up any queries, or would it just ensure format? I know that with selective xml indices, you can do things like specify the datatype associated with the xpath which can further optimize retrieval.
Hi, I am trying to use a typed dataset created using the Query builder which returns the data correctly when I use 'Execute Query' in query builder but as soon as I attempt to return a dataset using the GetData method created I get the following error: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Which is not very helpful, any ideas where the problem may be? I have tried switching off enforce constraints and setting the NullValue property of all strings to 'Emtpy' bu that has no effect. Thanks in advance
