I'm unable to do a RDA.Pull() when I have the sqlcesa30.dll running under HTTPS. What are the requirements to allow me to pull with the dll under HTTPS?
what are the impacts running under https:?
Hi there
I have two machines one 64bit machine with SQl 2005 on it and another 32 bit machine which I use as my web server both running win2003. I have followed the knowledgebase article from Microsoft (http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx) and also researched postings on this site but can't seem to access the cubes remotely. I have changed to msmdpump.ini file to have the <ServerName>mycomputername</ServerName> which points to the SQL box.
I can connect to the cubes from the 32 bit machine using somethign like crystal reports and connecting directly to the server name but can't connect to https://localhost/olap/msmdpump.dll I get an error about could not connect to the computer name or the computer is not runing analysis services.
Any ideas?
Cheers,
Derek
Hi!
I'm new using MSSql 2005 Express. How can i access my DB using http/https for reporting and DB changes/administration?
Regards,
JP
Hi,
I am seeing an unusual pop up when I try to hit the Website directory. I have setup replication setup for mobile units on IIS 6.0. When I try to hit the - http://defaultwebsite/test/sqlcesa30.dll - it tells me to open, save for cancel the sqlcesa30.dll file. This is weird. I have not seen this before.
When I hit the path from a internet browser - http://defaultwebsite/test/sqlcesa30.dll - it should come back with something like SQL Mobile Agent 3.0.
Any thoughts,
P
I am going to use https for our website. Will this encrypt all of our web page? Can i just use https for some of pages?
Many thanks.
Hi all,
I encounter a problem of unable to access Remote Server after i placed my web application into the web server.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
So I googled and tried lot of different ways of connecting.By piped name, IP, trying instance which that server don't even have one :X.I also tried typing in cmd > telnet localhost 1433It appeared that the telnet fail, i tried it on other machine, it works. So is it cause by denied of access through that port?I checked at the sql client network, it show 1433, i check the server too, it show 1433.I also checked if there's any firewall, it appear there is no firewall at all.The sql server i trying to connect is SQL 2000, it run by Windows Server 2003
Any advise or more information you needed to help me solve this problem?Thanks
Hi,
I have a SQL Server 2005 Express database dbase.mdf which I cannot access. It works fine in VWD and the development server using the following connection string: String connectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\dbase.mdf;Integrated Security=True;User Instance=True"But when the site is not on the development server but on IIS, I get a SqlException saying "User does not have permission to perform this action." when I execute the connection.Open() command. I find it extremely frustrating that something which works in the development server fails on the real server. Can anyone help me with this? Do I have to change my connection string, or perhaps set some permissions...I have already given the IUSR_MACHINENAME account and the ASPNET account full access to dbase.mdf. Surely this must be an issue that lots of people deal with... How do other people manage to log to access databases? Any help would be much appreciated. Thanks,P1000
Hi All,
Which some 1 can help me this.
I've developed an application and everything work fine after deploy. But after restarted my PC, i'm unable to login to my application which tie to the xxx.mdf DB and prompt Database error with no description. Until when the i click second time, only i'm able to acess into it. What happened actually?
I'm using sql express as embedded db on my local pc. This is without any remoting access.
I can't run my web application on remote pc which is connected in flan with my pc.It works on my local pc but it is not working on remote pc. i m geeting an error like as blowAn error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) i have used sql server 2000 for my database but i my getting error for sql server 2005 which i have never used in my web application.Here is the Exception detailsException Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)i have used coonection string as followsData Source=neptune;Initial Catalog=azim;User ID=saso can anyone give me soluion of this problem
View 1 Replies View RelatedI logged on to my SQL Server Express this morning and received the following error:
Cannot connect to MICHELLEWSQLEXPRESS.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
What is interesting is that its on a local computer. I followed one recommendation to enable the pipes and tcp but that didn't work either. How do I change the default settings to allow remote connections (on a local computer) when I can't log into the server?
Hi,i'm at wit's end here. My problem:I'm trying to do an insert into a table with ExecuteNonQuery and keep getting the error:"input string is not in correct format"I am trying to insert a string into sql server 2000 type varchar(length=50) and it won't work so instead I just decided to get a count on the number of records existing and I got the same error (see above) when I tried this. The code for this last part:<CODE>
Dim MyCmd As New System.Data.SqlClient.SqlCommand.' other code here.......Dim TempSQL As String = "SELECT COUNT(*) FROM tblUsers"
MyCmd.CommandType = CommandType.Text
MyCmd.CommandText = TempSQLDim a As Object = MyCmd.ExecuteScalar()</CODE>I am really stuck on this and cant find the answer anywhere online.Cheers,Joe
Hi,
I'm unsure what happened, but I'm using SQL Server 05 Developer Edition. I've been working with a local database where I tried to add a clustered index on a huge table (about 50M records). Well, I had to stop the query since it was maxing out my work computer. Since then, I've been unable to open the database or run queries against it.
When I open SQL Server Management Studio the database says In Recovery. Once it's done, when I try to expand tables, I eventually get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
If I run a Select * from INFORMATION_SCHEMA.TABLES query, it will go on for a while
If I try to access the properties of the Database (right clicking), I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
Cannot show requested dialog. (SqlMgmt)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I'm unsure where to go from this point forward.
I (actually my DBA did it) have created an SSIS package in MS SQL Server 2005. It can be found under Integration Services under:
Stored Packages
MSDB
VisBridges
ExportTime
Using the Execute Package Utility, it runs perfectly.
I used the article at http://msdn2.microsoft.com/en-us/library/ms403355.aspx to build an application to run it.
My code includes the following (written in VB.Net):
a Web Service Function called LaunchPackage:
Public Function LaunchPackage(ByVal sourceType As String, _
ByVal sourceLocation As String, _
ByVal packageName As String) As Integer ' DTSExecResult
Dim packagePath As String
Dim myPackage As New Package()
Dim integrationServices As New Application
' combine path and file name
packagePath = Path.Combine(sourceLocation, packageName)
Select Case sourceType
Case "file"
' package is stored as a file.
' add extension if not present.
If String.IsNullOrEmpty(Path.GetExtension(packageName)) Then
packagePath = String.Concat(packagePath, ".dtsx")
End If
If File.Exists(packagePath) Then
myPackage = integrationServices.LoadPackage(packagePath, Nothing)
Else
Throw New ApplicationException("Invalid file location: " & packagePath)
End If
Case "sql"
' Package stored in MSDB.
' Combine logical path and package name.
If integrationServices.ExistsOnSqlServer(packagePath, <servername>, <UserID>, <password>) Then
myPackage = integrationServices.LoadFromSqlServer(packageName, <servername>, <UserID>, <password>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case "dts"
' package is managed by SSIS Package Store.
' Default logical paths are File System and MSDB.
If integrationServices.FolderExistsOnDtsServer(packagePath, <servername>) Then
myPackage = integrationServices.LoadFromDtsServer(packagePath, <servername>, Nothing)
Else
Throw New ApplicationException("Invalid package name or location: " & packagePath)
End If
Case Else
Throw New ApplicationException("Invalid sourceType argument: valid values are 'file', 'sql', and 'dts'.")
End Select
Return myPackage.Execute()
End Function
My TestPage includes the following:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
Dim launchPackageService As New LaunchSSISPackageService
Dim packageResult As Integer
Dim sourceType As String = "dts"
'Dim sourceLocation As String = "M:mssqlssiconfig" ' for "file"
'Dim sourceLocation As String = "MSDBVisBridges" ' for "sql"
Dim sourceLocation As String = "VisBridges" ' for "sql & dts"
'Dim sourceLocation As String = "MSDB"
If rdoCreateTimeTrans.Checked Then
Try
packageResult = launchPackageService.LaunchPackage(sourceType, sourceLocation, "ExportTime")
Catch ex As Exception
Response.Write("The following exception occurred: " & ex.Message)
End Try
End If
End Sub
I've tried both "sql" and "dts" with all the various permutations that are listed (and commented out) above. I either get an error that says:
The top level folder "VisBridges" is not found. ("dts" "VisBridges") -- or --
Invalid package name or location: MSDBVisBridgesExportTime ("dts" "MSDBVisBridges") -- or --
Cannot find folder "MSDBVisBridgesExportTime" ("sql" "MSDBVisBridges") -- or --
The specified package could not be loaded from the SQL Server database ("sql" "VisBridges")
Any assistance would be greatly appreciated.
Many thanks,
Michell
Hi Guys,
After installing SQL Server 2005 Reporting Services, I got the following errors:
1. When I tried to open http://localhost/reports/ , I got the following error message
The report server is not responding. Verify that the report server is running and can be accessed from this computer.
2. When I tried to open http://localhost/reportserver/ , I got the following error message
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerRSReportServer.config' is denied.
Is there any clue for this technical problem?
Immediate response is appreciated.
--Amde
Hi
I'm able to get into Report Server but when I try to access the Report Manager with the same logon I get the following error:
"An error occurred while attempting to get the ReportServer Url."
Can anyone shine any light on this please?
Thanks
I have two drives in SQL Server Box. C and D drives. I am using below script to move mdf and log files from C: drive to D: Drive. However, I keep getting error :Â Directory lookup for the file "D:PackagesTestVGR.mdf" failed with the operating system error 5(Access is denied.).
USE MASTER;
GO
-- Take database in single user mode -- if you are facing errors
-- This may terminate your active transactions for database
ALTER DATABASE TestVGR
[code]...
Hi,
I have SQL Server 2005 installed and functioning (it does everything I've asked it to do locally). I also have the Express and Standard Editions installed on a computer running WinXPPro SP2 with all the WinUpdates applied. I also have VS2005 installed on this computer. I've done some development work on this computer, using VS2005 to create a SQLDB, connect to it, add data, etc. This is all okay.
The problem is I cannot connect to the SQL Server from the client computer. I installed the client tools on this XP Pro box along with all the WinUpdates. Here's what I can do...
I can ping the SQL Server by name (the name gets resolved).
I can copy files between the two computers using Explorer.
I enabled "Allow remote connections to this server" in the Server Properties / Connections page.
I did not change the default port of 1433.
The TCP/IP protocal is enabled in the Configuration Manager.
The Surface Area has been configured to allow local and remote connections using TCP/IP and named pipes.
SQLBrowser surface is running as is the MSSQLSERVER service.
So what's going on? I am new to SQL Server to it may be something very simple / obvious.
Thanks for your help,
Scott
Hi,
View 4 Replies View RelatedI am unable to acces Oracle from legacy DTS designer, here is what I have done,
1. I have kept my old DTS packages in SQL2K5 legacy DTS container
2. Now I am unable to access oracle; it gives provider error
3. I am able to connect oracle from SQLPLUS
How can I troubleshoot this problem?
------------------------
I think, therefore I am - Rene Descartes
Hi, when I am using the Report Manger to open a report, I am unable to acess the Database from my .Net application and vice versa - error report from MS Visual Web developer - "Operating system error 32: "32(The process cannot access the file because it is being used by another process.)".
I've lost access to SSIS and BIDS.
I'm a SQL 2005 developer DBA with a 1.5 years experience with SQL Server 2005. It has been a while since I needed to use SSIS. I used it with no problems earlier this year when I was managing the team conversion to SQL Server 2005. Now it no longer appears on my START > Programs > SQL Server 2005 menus. I had to reinstall SQL Server 2005 and Visual Studio 2005 months ago and must have lost it then some how.
How do I get access to BIDS and SSIS again?
SQL Server Integrated Services shows up in my Services list as running.
I've already tried Add/Remove Programs to drop that component from SQL Server 2005, reboot, Add it back, reboot. Still does not show up in my menus and the Service is running. The Setup Bootstraplog summary for this effort shows no failures and shows this:
Product : Microsoft SQL Server 2005 Integration Services
Product Version : 9.00.1399.06
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0021_xxxx-xxxx_DTS.log
My SQL Server level is 9.0.3054. The About Info is:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
My Visual Studio About Info is:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: Professional
Microsoft Visual Basic 2005 77626-009-0096213-41845
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77626-009-0096213-41845
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77626-009-0096213-41845
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77626-009-0096213-41845
Microsoft Visual J# 2005
Microsoft Visual Web Developer 2005 77626-009-0096213-41845
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005 77626-009-0096213-41845
Microsoft Web Application Projects 2005
Version 8.0.50727.762
Crystal Reports AAC60-G0CSA4B-V7000AY
Crystal Reports for Visual Studio 2005
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB937061)
Also, in case it is relevant, I've NEVER installed SQL Server Express or had it installed.
When I reinstalled, I installed SQL Server 2005 before VS 2005 since I know that has caused problems with some people.
Please help me get SSIS and BIDS access again.
Thanks,
Paul
Not sure if this is the right forum to post this...
After going through lot of old posts in various forums and changing lot of settings, i'm still not able to access my Server remotely.
This is Windows 2003 Server machine with Sonicwall Firewall, i have allowed Port 1433 in both Firewall and ISA and call is getting through but i'm getting following error msg :-
{"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
This machine is also having Sql Server 2000, and the SQL Server 2005 is installed with named instance.
My connection string is :-
"Data Source=192.168.0.1MYSERVER;Initial Catalog=MyDatabase;Integrated Security=True"
In example above, i'm showing dummy values but actual string is having the actual live IP address and correct named instance and database.
If i use a local address like 192.168.0.1 then i'm able to connect.
My TCP/IP Address in Sql configuration is having my Live IP Address and the port 1433.
Any help will be highly appreciable..
I didn´t know where to put this so sorry if this is not the appropriate place.
I am running Windows XP pro sp2 with visual studio 2005, ms sql server 2005, and a number of other applications.
My problem is that I am not allowed to install new windows components(I want to install IIS). When I try to access from either control panel, add/remove programs, Install new windows components or directly from the winXP cd I get the following error in a pop-up form and I can only press "OK":
"Another copy of Setup is already running. Complete the other Setup or restart Windows."
I am not running the instance more than once. I do this as the first thing after a restart with the same result. When looking at the processes in the task manager I cant see anything unusual.
It is a pretty slow computer so that may have something to do with it - some timeout or similar.
It is getting pretty frustrating so any suggestions are more than welcomed! thanks.
EDIT: I used process explorer to locate some stalled windows update process which I killed. Then msmqocm.inf was missing, but that seems to be a FAQ.
Hi all
I have a little problem with my IS Server.
I am using Windows Server 2003 64bit and IS 9.0.1399.
I have two named instances for databases.
I am able to connect to Intergration Services just with the
Servername (no Instance Name) and I see the folders in there.
When I try to open the MSDB Folder (under "Stored Packages") I
get the following exeption:
"Failed to retrieve data for this request ...."
and Additional informations: "Login timeout expired ....."
I am of corse administrator, so permission will be ok ...
Any ideas?? Thanks for any comment!!
Best regards
Frank Uray
Hi,
We are facing a problem while trying to access the report server. When I try to access reports homepage "http://servername/reports", I get following error "Unable to communicate with report server.
Please verify that the report server is operational."
I have not touched report server config file.
I noticed that the problem can be temporarily fixed, if I disconnect remote connections (mstsc) to above server machine, which are idle for 2-3 days. Then the report server works fine.
But I don't see any link between mstsc connections to server machine and report server problem.
I think, it might be some memory issue, can somebody tell me how to fix this problem ?
I am getting calls from my office in the middle of the night to fix this error..!!!!!
I want permanent solution !
Thanks,
Prashant
Hi,
We are using the ReportViewer web control (SSRS 2005) to render server reports on a webpage that is exposed over the internet. Clients connect using HTTPS, however they are connecting to an ISA server which forwards the requests to the website using plain HTTP.
Reports are shown correctly, however when the user clicks the print button, the request to the web server is sent using HTTP not HTTPS and the ISA server is not allowed to accept incoming HTTP traffic. The result is that reports cannot be printed. We have proven that the reports do print if we manually alter the request to use HTTPS, so there is definitely no problem with our printers.
The problem is that we cannot work out how we can get the print request to be automatically sent using HTTPS.
We had a similar problem when we implented ReportBuilder, but we got around this by specifying HTTPS in the ReportServerExternalUrl tag in the RSWebApplication.config file. Unfortunately this has no effect on the print request from the ReportViewer.
So if anyone has got a solution/workaround/suggestion for this problem we would be very grateful.
Thanks,
Dean.
I am working with Microsoft Search on SQL 7.0 and the catalog will not populate properly. The NT event log says "Unable to access crawl seed. The operation timed out." Has anyone run into this before? I have been able to duplicate this problem on two boxes. Question 2: Is Microsoft Search stable at all?
View 1 Replies View RelatedI am unable to update a table (either by opening it and entering datadirectly or through a form). I have set the recordsettype property toupdateable snapshot and have set the permissions to update inside ofthe SQL Server 2000 to checked. Unfortunately, these items have notworked. Any advice is appreciated. Thanks.Dave Christman
View 1 Replies View RelatedHi
I've loaded a C# assembly into my database with External Access (the dll contains a routine
that accesses Environment.MachineName).
I am now unable to invoke any of the entry points in this assembly. I get the error message
'An error occured trying to load assembly Id XYZ. System.IO.FileLoadException.....'
I have set the database Trustworthy flag to ON and the assembly does not have a strong name.
Can anyone tell me what I've done wrong?
Thanks
Steve
P.S. I am calling the assembly from SQL code residing in a different database than the one
the assembly has been loaded into.
The reason I had to start a new thread was that the old thread seems to be closed. There is no "Reply" button showing.
I still have the same problem. The last post asked if I was sure I was using SQLExpress.
I only have SQLEXPress and I have never had anything else. Therefore the question becomes - Why does the system seem to think I have another version?
Alan
My host does not provide a good web based management tool for the sqlserver database I am using. They queue imports and exports so it takesseveral hours before things are finished. They provide this web basedaccess and access through asp or asp.net. Does anyone know how I couldtunnel a connection from enterprise manager to the database using aasp.net web application?ThanksTy
View 1 Replies View RelatedHi,
In my CLR stored procedure, I made a https request. To by pass the security check, I change the property of ServicePointManager: ServerCertificateValidationCallback . But SQL server 2005 does not allow me to do this and gives me exception related to security.
It seems the CLR assembly does not have permission to set the property of ServicePointManager: ServerCertificateValidationCallback.
What kind of user should I use to run this stored procedure?
I already assign external_resource to the assembly in SQL server 2005.
The code:
ServicePointManager.ServerCertificateValidationCallback = new RemoteCertificateValidationCallback(myCertificateValidation);
public bool myCertificateValidation(Object sender,
X509Certificate cert,
X509Chain chain,
SslPolicyErrors Errors)
{ return true; };
thanks,
Guangming
I have a site I created in .Net 2.0 the site is using sql server 2000 on the network. On the development machine the site is working as it should. I have also installed sqlexpress on the web server. I then push the site up to my server and I get the "unable to access sql 2005 pipes error". I installed vs2005 on the web server. when I run the app in vs2005 I don't get any errors and the application comes up. The app's connection string is placed in the web config file. I also changed the sqlexpress for local and remote logins.
What else could be the problem. I have never seen this before. And all the non DB sites work!
Enviroment:
Webserver Windows Server 2003, .Net 2.0 framework, iis6, sqlexpress, vs2005
Database SQL2003