Unable To Backup To Tape Drive
Dec 17, 2007
i have taken full database backup on tape drive one week ago,by automated scripts ,now when i check the maintenance plan history , it says the task failed and gives a message that unable to open the \. ape0 ,with error
([Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3201: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open backup device '\. ape0'. Device error or device off-line. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.
)
View 4 Replies
ADVERTISEMENT
Jul 23, 2005
First posting to the group. I have received a lot of valuable info from youguys. Now, an OT question:What's a good tape drive to perform unmanned weekly backups for a WindowsXP Pro box running SQL server 2000?--Joel Farris | AIM: FarrisJoel** Their Web. Your Way. http://getfirefox.com **
View 1 Replies
View Related
Mar 12, 2007
I get the following error in a log file created in the osql command:
Msg 3201, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
Cannot open backup device 'x:Servername_master_sqlbu_200703101930.bkf'.
Device error or device off-line. See the SQL Server error log for more
details.
Msg 3013, Level 16, State 1, Server KAC2KGS2, Procedure usp_Kaman_Full_SqlDB_Backup, Line 150
BACKUP DATABASE is terminating abnormally.
The device is established in a CMD file right before the osql command is started that starts my stored procedure. The CMD in this file is:
for /f "tokens=15 delims=." %%i in ('ipconfig^|find "IP Address"^|find "192.168"') do set SUBNET=%%i
:loop
if exist x: net use x: /del
net use x: \192.168.%SUBNET%.1ackup
if not ERRORLEVEL 1 (
goto continue
) else (
echo FAILED TO CONNECT TO BACKUP SERVER >> "%SystemDrive%LogFiles\%Computername%.log"
sleep 60
goto loop
)
:continue
echo IP ADDRESS OBTAINED
Echo delete old log file if it exists
if exist %3\%computername%_kaman_full_sqldb_backup_old.log del /Q %3\%computername%_kaman_full_sqldb_backup_old.log
Echo Rename log file to old.log
rename %3\%computername%_kaman_full_sqldb_backup.log %computername%_kaman_full_sqldb_backup_old.log
echo backup SQL Databases on server will start now
osql -E -n -d %1 -i %2kaman_full_sqldb_backup.sql -h-1 -o %3\%Computername%_kaman_full_sqldb_backup.log
In the stored procedure I try to use the x: drive and that does not work. I have tried obtaining the \192.168.x.x address and that only works on some of my servers. All are running SQL 2000, some are using Win2K and Win2003. It does not seem to matter. One of them that is using Win2003 only fails occationally.
I notice when I do a
exec master..xp_cmdshell 'x:'
The system cannot find the drive specified.
Yet, when I go to the server there is an x drive.
I am using the sqlserv user to run the job and that use is an administrator on the local machine. This is a virtual machine. We add the X before the osql and drop it after the command finishes.
Any help would be appreciated. Thanks, dbmsql
View 6 Replies
View Related
Jan 24, 2008
i have a tape drive where i backup database every weekends, and i have a tape which shows that set created and size column displays -0 bytes. what does that mean , i also want to know how much space is left in the tape drive so that i can backup accordingly
Please help me out for this issue
View 1 Replies
View Related
Feb 5, 2008
I have a SQL 2005 Server (SP1) running on Windows 2003 server machine. Now windows can detect the tape drive attached to the system as 'HP StorageWorks DLT VS160'. Even 'ntbackup' detects it and is able to backup data to the tape drive. However, SQL Server is unable to detect the tape drive. The tape does not show up in the Backup Devices in Server Objects and hence I'm unable to take backups directly to the tape via SQL Server. How do I get SQL 2005 to recognize the tape drive?
View 5 Replies
View Related
Mar 9, 2007
I am setting up a new SQL Server that has an external HP 920 SAS Ultrium tape drive attached to it via a p400 sas card.
I am running 2003 R2 x64 with 2005 SQL Server x64, and I am trying to set up my DB backup plan but for some reason I can't get SQL to recognize my tape drive, alhough it is listed in device manager.
Anyone have any thoughts? I'm kind of stumped.
Thanks in advance,
Mark.
View 5 Replies
View Related
Mar 23, 2007
We are currently trying to restore a copy of our production database to a different server. Unfortunately SQL does not see the tape drives and we are not able to add them. The tape drives are installed and visible in device manager. I have updated all drivers and firmware but still no luck. Any ideas would be appreciated. Thanks
View 1 Replies
View Related
Aug 16, 2007
Need to know the actual size on the tape drive
I€™m using LTO3 tape drive (400GB) the used media is for LTO2, currently I€™m looking for LTO4(1.6TB) but I need the backward compatibility to support LTO3 tapes so I can go for LTO2 media or LTO3 media.
I need to know the size of the database backup (Ms SQL2005 SP1 x64-bit, on Ms Windows 2003 R2 x64-bit) on the tape drive. I can see the backup size of the database but not the size on the tape which is using hardware compression.
Is there a way or a tool to view that.
View 4 Replies
View Related
Jul 6, 2007
I'm trying to test my backups by restoring from production onto a DEV machine.
However, when I insert the backup tape into the drive, then go into SSMS and right click on
Databases -> Restore Database -> From Device .... -> Tape -> Add -> (my tape drive \.Tape0) -> Contents
it displays the contents as it should.
So I click "Close" to close the contents and bring me back to the Specify Backup where I have \.Tape0 selected and I then click "OK"
SSMS sits for a few seconds, and then I get a time out error message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3054&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
That's all the further I can get... any suggestions?
I'm VERY perplexed by this...
View 2 Replies
View Related
Apr 24, 2000
Hi,
Does Any one know How to find out How much space left in a Tape Drive?
Is it possible with Win nt OR Win 2000?
or It required some special utility.
Any one know please suggest,
Thanks
Nil.
View 2 Replies
View Related
Apr 18, 2000
Hi
I Have 8 small databases around 10 to 30 MB each.
I am taking tape backup. Full database backup Daily.
Now problem i am facing that i am not able to schedule this process because
when it complete one database backup, tape automatically come out. So
due to this reason i am not able to schdule this job.
If any one has solution for this please suggest.
Thanks.
Nil.
View 1 Replies
View Related
Jan 9, 2001
Hello,
I need to backup the database to file and then copy it to Tape. Can anyone guide me how I should do it. I need to automate it.
Thanks.
Rea
View 2 Replies
View Related
Nov 4, 1999
We have Dell Optiplex GX1 PCs with Seagate ST22000 IDE tape backup devices, running NT Workstation or NT Server and SQL 7.0 with SP1, NTSP5.
SQL 6.5 will backup successfully to these devices, but SQL 7.0 will not.
The most common error message is 18257, Device or media does not support ...
42000 Syntax error, permission violation, or other nonspecific error...
View 3 Replies
View Related
Jul 2, 2001
I am trying to backup a database to a tape. It works when it wants to. I get a 3013 error. The drive is fully functional. Seagate backup works fine. SQL Backup does not. I think it might be that the tape needs retensioning sometimes. Here is the sql statement: BACKUP DATABASE pubs TO TAPE='.ape0' WITH FORMAT. Is there a retension parameter I am failing to see?
View 2 Replies
View Related
Jan 13, 2005
Hi Folks,
I have a SQL Server 7.0 with and exteranl SCSI tape device.
When I attempt to backup a database in EM the tape device is being greyed out.
I have add the backup device using sp_dumpdevice and made sure that it is in sysdevices table. It will not allow me to add this backup device from the drop down.
1. Why does EM not see this device ?
2. If I try to back this up using T-SQL will I be able to use the registared tape device.
Thanks Folks
View 2 Replies
View Related
May 17, 2007
I want to create a backup device for the tape drive.
So I go in "Server Objects"=>"Backup Devices" and create a new device. Problem is: In "Destination" I can't select "Tape:".
The ntbackup.exe program recognizes the tape drive, but SQL2005 not.
I have this:
-SQL2005 Enterprise edition 64bit.
-Tape drive HP StorageWorks Ultrium 960.
Someone knows how I can create a backupdevice for the tape?
Thanks
IF Debugging = removing bugs from program THEN programming := putting bugs in program;
View 4 Replies
View Related
Jul 20, 2005
HiWe are running SQL 2000 Enterprice version with SP3a on a DellPoweedge 5600 server running Advance Server. It has Tape drivePowerVault 110T (DLT VS80 Tape Drive) & uses DLT tapeIV tapes. A DBmaintenance job had been specified to backup on to tape daily. I havefollowing issues;1.The backup job sometimes fails with the following error in Eventlog(Event ID:17055)3041: Backup failed to complete the command BACKUP DATABASE [UNIQRS]TO TAPE = N"\.Tape0 WITH NOINIT, NOUNLOAD, NOSKIP, STATS = 10,NOFORMAT. The job is specified with the Verification option.2. If I try to restore a succeeded backup it asks for a initial tapewith a past date which does not exists3. Is there a way to view the content of the tape & free space etc.4. It is recommended to put a disk backup & transfer it to tape usingWindows backup utility. Is there a way to automate this by initiatingthe Backup utility when the SQL finishes the disk backup.ThanksChirath
View 2 Replies
View Related
Nov 7, 2006
I've got a new HP ML370 G4 Server 2003 SP1 with a fresh install of SQL 2005 SP1. I'm trying to create a backup device for the internal HP DAT 40 and tape is greyed out as an option. I have the newest HP software drivers and firmware. The tape drive is seen by Server 2003 device manager and by NTBACKUP. I can backup using that program. Why doesn't SQL 2005 see it? I tried a new HP Ultrium tape drive with the same results. Anyone else see this and can recommend a fix? TIA
View 11 Replies
View Related
Aug 29, 2007
Hello,
I am trying to configure the backup device on SQL Server 2005.
I cannot get the Tape device list.
The Tape Device is attached physicaly to the server ! (IBM Ultrium-TD3 scsi). I can 'see' the device using Windows Backup; but I cannot even get the list of tapes on SQL Server.
Can you please give me some help on this one ?!
Thank you all.
Youss
View 6 Replies
View Related
Jan 19, 2007
Hello,
TSQL command works fine,
C:SQLCMD
1> BACKUP DATABASE TestDB TO TAPE = '\.Tape0'
2> GO
but how to append more than one databases( SQL 2005) to the same tape.
Having said this, what is the solution for " I've got a new HP ML370 G4 Server 2003 SP1 with a fresh install of SQL 2005 SP1. I'm trying to create a backup device for the internal HP DAT 40 and tape is greyed out as an option .........." Pls advice me.
View 1 Replies
View Related
Nov 28, 2007
Hello!
Me and my collegues was recently assigned to maintain a SQL Server 2000 instance, which pretty much only holds one database.
From what we can tell, a backup of this database has never been created, atleast not through SQL Server.
When asking the previous owner, the answer was "We have been taking 'Legato backups' every day!"
We now intend to schedule a SQL Server backup job, but out of curiosity...
In case of a disaster, would these "Legato backups" have been any use at all?
Please elaborate :-)
View 5 Replies
View Related
Jan 13, 2000
Hi,
How do we know that tape backups is working. And how do we know what is on them.
dindu
View 1 Replies
View Related
Nov 7, 2001
My company is using backup exec to bacup all servers and when it came to this particular server these backups were skipped. I checked the log files and backups that are ran within SQL. Can someone explain to me what may have caused this. My guess is that there was something with the media that was trying to backup this server. Thanks for all of you help.
Below is the error message that was recieved after backup exec attempted to backup up this server.
Media Name: "DIFF"
Backup of "SQLserver1E$ "
Backup set #49 on storage media #1
Backup set description: "Daily 5"
Backup Type: DIFFERENTIAL - Changed Files
Backup started on 11/05/2001 at 11:46:00 PM.
The item MSSQL7Datadatabase1_Data.MDF in use - skipped.
The item MSSQL7Datadatabase1_Log.LDF in use - skipped.
The item MSSQL7Datadatabase2_Data.MDF in use - skipped.
The item MSSQL7Datadatabase2_Log.LDF in use - skipped.
The item MSSQL7Datamaster.mdf in use - skipped.
The item MSSQL7Datamastlog.ldf in use - skipped.
The item MSSQL7Datamodel.mdf in use - skipped.
The item MSSQL7Datamodellog.ldf in use - skipped.
The item MSSQL7Datamsdbdata.mdf in use - skipped.
The item MSSQL7Datamsdblog.ldf in use - skipped.
The item MSSQL7Dataorthwnd.ldf in use - skipped.
The item MSSQL7Dataorthwnd.mdf in use - skipped.
The item MSSQL7Datapubs.mdf in use - skipped.
The item MSSQL7Datapubs_log.ldf in use - skipped.
The item MSSQL7Datasysdev_Data.MDF in use - skipped.
The item MSSQL7Datasysdev_Log.LDF in use - skipped.
The item MSSQL7DataTEMPDB.MDF in use - skipped.
The item MSSQL7DataTEMPLOG.LDF in use - skipped.
Access denied to directory emp.
^ ^ ^ ^ ^
Backup completed on 11/05/2001 at 11:47:02 PM.
Backed up 55 files in 48 directories.
19 items were skipped.
Processed 84,537,951 bytes in 1 minute and 2 seconds.
View 1 Replies
View Related
Feb 24, 1999
Hi,
we have backups taken regularly on tape device.
When I restore the back up on the same server,it is working.
But if I try to resotre the same backup on a new server it is giving problems
I have the same configuration of the new and old server.
It is giving error 10005 DB process dead and after that the database is marked grey and in bracket (loading)
and a lot of other errors like Begin Stack Trace,
sympton dump created,end stack trace ,etc( A very Long List of errors) and a new dump is created in log directory
It is also telling "EXCEPTION_ACCESS_VIOLATION"
i am having the same problem on all the servers we have.
Help me regarding this.
DP
View 1 Replies
View Related
Jul 28, 2004
How much time does a 20 g tape backup take to recovery
I am on 6.5 sql and have compacq 15/30 gb DLT
How best to configure a standby sqk 2000 server
salim
__________________
View 8 Replies
View Related
Nov 10, 2004
Hi
I am having some trouble with our Veritas Backup Exec not properly releasing db backup files, & thus interfering with the deleting of old backups.
We have other servers still needing tape backups implemented and
I wonder if anyone has a good backup software/hardware system to recommend, that is ideal for database backups, & on the hardware side is reliable?
Anyone have any to recommend?
thx
Des
View 4 Replies
View Related
Jul 20, 2005
Environment: Win Server 2003 Standard Version, SQL Server 2000, HPDDS3 Tape(local).Backup procedure:1. open SQL Server Enterprise Manager2. find the database i want to backup3. right click and select "All Tasks"-"Backup Databse..."4. Select "destination"-"backup to"-->>"Tape"5. Click "Add", Select "Tape" device name(or may address)"\.Tape0"6. Click "OK" begin to backupError:system prompt:The file on device '\.Tape0' is not a valid Microsoft Tape Formatbackup set. BACKUP DATABSE is terminating abormally.On this SAME server, using the same TAPE, but USE Tapeware(a HP backupsoftware come with HP tape machine) to back file, everything is OK.I don't have any clue about this. am new to Windwos, new to SQLserver. Any body could show me light? Thanks in advance.A.Y. From shanghai/China
View 6 Replies
View Related
Feb 24, 2000
Hi
I have two database called test1 and test2 both are of same size(both device and log). I run the following statements to take the backup of both the databases using the tape device 'tapedevice1'. dump database test1 to 'tapedevice1'
dump database test2 to 'tapedevice1'
After this I run the load statement
load database test2 from 'tapedevice1'.
It just restore the database test2 with test1 data which is added first to the tape with a warning.
Is there any restriction that in a single tape backup of more than one database is not possible.
Your valuable suggestion appreciated
Jiji
View 1 Replies
View Related
Aug 7, 1998
Does anyone know if it is possible to have a tape device another server as a tape dump device on SQL. Instead on removing the tape drive and installing it locally ?!?
Regards
Jasper
View 2 Replies
View Related
Oct 17, 2005
Need help.
We lost (Couldn't find ) the full backup on a Tape we were supposed to use for restore, but seems like they lost it. All we have is a Diff backup. Wondering if that is any good at all .
Please help
Thanks
View 1 Replies
View Related
Aug 25, 2007
I have inherited a SQLS erver 2000 instance where the client neverimplemented a backup startegy for the "master" and "msdb" databases.MSDB is now showing errors and my only option for a restore is from atape backup of the server.Any thoughts..
View 1 Replies
View Related
Jul 24, 2006
I have schedule backup job from SQL Server 2000 to Tape. Each Jobs consist of 4 steps which backup different database.
Sometimes I encounter problem. The Message is
Executed as user:dbo. The file on device '\.Tape0' is not a valid Microsoft Tape Format backup set. [SQLSTATE 42000] (Error 3242) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
There is no problem at the command, as it will run normally when i manually trigger the schedule job. Sometimes the error occur only after few days the job run.
View 6 Replies
View Related
Sep 15, 2006
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
View 5 Replies
View Related
