Hello , i m new to SQL Server when i am connecting it shows me error
"An error has occured while establishing a connection to the server.When connecting to SQL Server 2005,this faliure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider: SQL Network Interfaces,error:26-Error Locating Server/Instances Specified)(Microsoft SQL Server)"
please help me as soon as possible, Thanks in advance
We have see login failures for windows accounts. Below is the error message.
Description: In our env most logins are windows accounts. Initially we thought it is an UAC issue and we tried to launch the SSMS using "Run as Administrator". However, we are seeing login failures.
Enviroment: Microsoft SQL Server 2014 - 12.0.2402.0 (X64) RTM Enterprise Edition (HyperVisor)
Error Message in Error Log :
2015-08-10 22:36:45.290 Logon Error: 18456, Severity: 14, State: 11. 2015-08-10 22:36:45.290 Logon Login failed for user 'domainloginname'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: 10.xxx.xxx.xxx]
[code]....
We tried dropping this account and re-creating the windows account with same permissions but still result is same. It throws same error message. Login failure message !!!
I am just about ready to tear my hair out on this one, at this point you guys are my last resort! Wouldn't it be nice if I could go to bed and have an answer for me in the morning....
I've had a working HTTP endpoint using Basic Authentication over SSL for months in our development environment, but now I'm moving our application to a production server and I'd like to be able to use Digest Authentication in the clear instead so the processor doesn't waste cycles on the SSL decryption. I've spent hours fiddling with my endpoint to no avail.
This is the closest message relating to what I'm doing that I've been able to find: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1131251&SiteID=1
In my case, the SQL Server is joined to a domain that is entirely Windows Server 2003 - no Windows 2000, so support for Digest Authentication is a non-issue. I'm also explicitly doing a GRANT CONNECT on my endpoint to the domain user I'm using. Here is the top of my CREATE ENDPOINT DDL:
I am debugging using wfetch 1.3... I can get this to work using NTLM Authentication; sending a GET to my endpoint with the ?wsdlsimple querystring parameter returns my WSDL just fine.
But Digest just doesn't want to work! If I remove NTLM from my AUTHENTICATION directive and try using Digest with wfetch or from my (PHP) web service consumer I get an HTTP 401 no matter what I do. I've tried fiddling with the DEFAULT_LOGON_DOMAIN, AUTH_REALM, and anything else I can think of.
The errors I am sporadically finding in the SQL Server error log are:
HTTP authentication failed. [CLIENT: 192.168.245.238] from source Logon
Followed by:
Error: 26026, Severity: 14, State: 1. from source Logon
I can't find any detail about the second error.
........
Just occurred to me that I've also been trying to view my WSDL directly in IE, and this is what's causing the SQL error to be logged, not wfetch - that's why it appeared sporadically.
So, wfetch isn't causing an 'HTTP authentication failed' error, but Internet Explorer is... maybe Digest Authentication isn't implemented correctly in wfetch?
Regardless... I'm still not able to authenticate from IE or from my client, but this may shed some more light on the issue.
I have created an EndPoint in SQL Server 2005 as per the code below.
CREATE ENDPOINT OSTC_LMS_Endpoint
AUTHORIZATION LMSEndPointUsers
STATE = STARTED
AS HTTP(
PATH = '/ostc_sql_endpoint',
AUTHENTICATION = (BASIC),
PORTS = (SSL),
SITE = 'OSTC-DEV-001'
)
FOR SOAP (
WEBMETHOD 'ostc_SQLSoapTester'
(name='OSTC_LMS_06.dbo.ostc_SQLSoapTester',
FORMAT = ROWSETS_ONLY,
SCHEMA=STANDARD),
WSDL = DEFAULT,
LOGIN_TYPE = MIXED,
SCHEMA = STANDARD,
DATABASE = 'OSTC_LMS_06',
NAMESPACE = 'http://tempUri.org/'
)
GO
USE master
GRANT CONNECT ON ENDPOINT::OSTC_LMS_Endpoint
TO [LMSEndPointUsers]
GO
USE master
GRANT CONNECT ON ENDPOINT::OSTC_LMS_Endpoint
TO [ostc-dev-001endPointUsers]
GO
----------------------------------------------------------------------------------------------------------------- The SPROC being exposed as the webmethod: -
The computer in question is our dev server and is running as a workgroup machine with the following: - Win Server 2003 SQL Server 2005 .net Framework 2.0 No firewalls or Proxies are in the way.
The computer has to be as a workgroup machine to reflect our live server.
The user LMSEndPointUsers is a SQL Server Login The user ostc-dev-001endPointUsers is a machine login
We have employed the Security class as per the information given in the SQL Server documentation with the intention of using the WS-Security headers that apparently are to be used when trying to authenticate using a SQL Server login.
I am not able to connect to SQL Database server using windows authentication when I am connected through VPN connection.However I am able to connect to same server using SQL server authentication and also able to do RDP to DB server machine.
I found a resolution in one of the forum suggesting to change UserRasCredentials to 0 value in *.pdk file.Since VPN connection which I am using generates instant proxy this resolution doesn't work.
Also application which I am using does windows authentication connection it is required for me to impersonate windows authetication when connected using VPN.
I just upgraded from Windows XP Pro to Windows Vista Bussiness and tried to reinstall SQL Server 2005 Developers Edition. After the installation i downloaded (using microsoft windows update) and installed all the service packs for sql and vista available.
My problem is when i open sql server management studio and try to connect to my default instance using windows authentication and database engine, an 18456 error occurs.
I enabled all the protocols and all the ports I disabled windows firewall and antivirus (eset nod32) I installed all service packs available I have also installed Visual Studio 2005 without installing sqlexpress
But nothing happens!
Please i am very desperate, any information will be gratefully accepted.
This is my installation Information
Code Snippet
Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services Client Tools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 6.0.6001.18000 (longhorn_rtm.080118-1840) Microsoft MSXML 3.0 5.0 6.0 Microsoft Internet Explorer 7.0.6001.18000 Microsoft .NET Framework 2.0.50727.1434 Operating System 6.0.6001
I want to distribute my sql server express database file ( .mdf ) with my application. The only connection I can use is the Windows Authentication but I need a Sql Server Authentication with which I can use a username and a password. I tried Sql Server Management Studio Express but no way Can anybody supply a step by step tutorial on how to achieve this? All the examlpes I could find in internet were using Windows Authentication, that's also interesting and painful Thanks for any help guys.
I created a HTTP-Endpoint on SQL Server 2005. Now I try to call this web service from a c# client but using SQL-Server authentication (i.e. my user is a sql server user but not a windows user). But it doesn't work. I can connect to the service using a windows user and NTLM authentication. But for some reasons Iwould much prefer if I could use SQL-Server authentication. Is it possible?
Here is how I created the endpoint:
Code Snippet CREATE ENDPOINT myService STATE = STARTED AS HTTP( PATH = '/services', AUTHENTICATION = (INTEGRATED ), PORTS = ( SSL ), SITE = '*' ) FOR SOAP ( WEBMETHOD 'GetStuff' (name='MyDB.dbo.FKT_getStuff', SCHEMA=STANDARD ), WSDL = DEFAULT, LOGIN_TYPE = MIXED, SCHEMA = STANDARD, DATABASE = 'MyDB', NAMESPACE = 'Services' ); GO
Can someone point me at an article that tells how to allow the ASP.net worker process to connect, via windows authentication, to a remote sql server instance ?
We have SQL server 2000 on windows 2000. From our desktop MS Access was connected to database through ODBC. Since yesterday (after our consultant had updated another asp application in the same server) we are getting €œSQL Server Error: 18452. €¦.. Login failed for user €˜(null)€™. Reason: not associated with a trusted SQL Server connection. €œ
The consultant saying he did not touch any settings on server (?). And the problem is even server€™s security property shows it has mixed mode authentication. But I cannot connect to server even through my SQL server enterprise manager in windows authentication mode. I can connect if I use SQL server authentication. Through ODBC I can connect also and test fine, if I use SQL authentication. But the Access application wouldn€™t connect using SQL authentication in ODBC.
So, can any one help me to find out what else could be done to make sure that the server is going to accept windows authentication. I€™m thinking any other settings or registry change €¦ etc. Please help.
I upgraded my 6.5 server to 7.0 two days ago running into small problems with the database upgrade wizard. I had some small problems with security which took me some time but was not that difficult once I figured it out. I then proceeded to switch back to 6.5 mode to transfer all the data that had been done that day to my development machine so I could then import it to the SQL 7.0 version. When I was done with the transfer I switched back successfully, started the server successfully, but I was unable to connect. I get the error "Connection could not be established...", so after several attempts to connect and shuting the server down I now am at a loss. The server runs fine in 6.5 mode but it will not connect in 7.0?? Tonight I am going to try to reinstall SP1, if that does not work I am going to try to reinstall SQL 7.0. Any suggestions???
On a fresh installation of SQL Server 6.5, I have opened the EM and registered the server but am unable to connect. I get the error of 'A connection could not be established to [ServerName]- [DB-Library] Unable to connect: SQL Server is unavailable or does not exist. General Network Error. Check your documentation.'
I've tried connecting with all different DB-Lib settings to no avail. Ultimately, I want to use TCP/IP. I am, however, able to connect to other SQL Server boxes from this EM, just not the local server. I am able to stop and start the services from Control Panel and from SQL Service Manager.
Since I haven't been able to log into the local SQL Server, I've registered the server in EM to log in with sa and a blank password. I've already completely uninstalled SQL and reinstalled it to see if that would help. It didn't.
Does anyone have any idea what the problem could be?
I am running SQL 2000 on Windows 2000 Server. The clients are running different OS ranging from Win 98/NT/2000. Although i am able to connect to the local host, but whenever i try to connect over the network the following error pops up :
unable to connect to server <server name> Server : Msg 11, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][TCP/IP Socket]General network error. Check your network documentation.
I checked up the event long on the server and found the following entry:
Event Type: Warning Event Source: MSSQL$NETSDK Event Category: (8) Event ID: 19011 Date: 1/20/2003 Time: 2:12:32 PM User: N/A Computer: <computer name> Description: The description for Event ID ( 19011 ) in Source ( MSSQL$NETSDK ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: (SpnRegister) : Error 1355.
May i further clarify that this error started today n till last week end (saturday, i am
stationed in India) there was no problem and the users were able to connect to the server
without any problem. My network engineer feels that its an sql problem and has nothing to do with network related issues.
i would appreciate if anybody could help me out. thanking in advance
recently i made my PC dual boot by installing windows 2000 advanced server. It already had win2000 profesional installed on it. since then i have been unable to connect to sql server running on some other server(called CONTROLS) on the LAN. I am able to access the CONTROLS server thru 'my networkplaces' and able to see all its hsared directories and access htem. but when i open Enterprise manager i cannot connect to CONTROLS. Please help me . i have already wasted 2 days over it.
I am unable to connect to SQL Server using isql_w or enterprise manager. The ODBC settings register successfull and the services show as started. I have tried starting SQL server in single-user mode with minimum config to see if memory is a problem but still cannot connect. The error logs show SQL as having started successfully with no errors. Has anyone got any ideas?
From my Win98SE box with MDAC 2.6sp1, I can't connect to SQL (win2k, sql2k). I've tried everything I know but nothing works.
I always get the following error: Unable to connect to server 192.168.1.2 ODBC: Msg 0, Level 16, State 1 [Microsoft][ODBC Sql Server Driver] Timeout Expired
some additional info... - both computers are in a workgroup, not in a domain. - this is a home network and they're connected via a Linksys cable modem router - another box on this same lan can connect to sql just fine, although it's running win2k. - all boxes have identical DSN, Subnet...settings - I also installed Jet4.0sp1 just in case, but that didn't help either - I'm primarily trying to connect via TCP, although I have tried Named Pipes as well - i can ping both boxes from each other just fine - odbc ping fails
MDAC has worked beautifully for me for the last several years. Did MS change something recently...or is there another problem?
Hello. I am very new to SQL Server. I've tried to look through other posts on the forum but did not find the solution I needed. Please help.
I have SQL Server running on Machine1 which I am able to connect to. What I want to do is connect to this server through a Machine2 that is on my network.
Both Machines run on WindowXP Professional
On the server of Machine1, I have: 1. Under the security tab, I have created a New Login using SQL Server Authentication (general tab), checked all server roles (server roles tab) and checked to permit all databases (in the database access tab) 2. On the server, went to properties -> security tab and allowed for SQL Server and Windows authentication
On Machine2 when I try to register the server of Machine1 through the Register SQL Server Wizard, I am able to see the server. However, when I use the newly created Login Name and password (from step 1 of above). I get a Login Failed for user message. When I try to connect to the server through Query Analyzer I also get an unable to connect to server message (Server: Msg 18456, Level 16, State1)
If you place an image of your server on a rebuilt server, rename it andchange the SID. You get an error message “UNABLE TO CONNECT” when youuse the SQL Query analyzer on a desktop computer to connect to theserver (hosting the image). If you add the server (hosting the image)to the Windows2000 server domain/active server and restart the server(hosting the image), you get the following error message: "YOUR SQLSERVER INSTALLATION IS EITHER CORRUPT OR HAS BEEN TAMPERED WITH (UNKNOWNPACKAGE ID). PLEASE RERUN SETUP."Wouldn't you think changing the name, the sid and adding it to a domainwould be enough to access it. I even created a new ODBC connection.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
i have three computers with three differnent running systems. about three days ago we were experiencing trouble getting into the game rooms at pogo.com. we thought it would be trouble with java since it affected all three computers. on the computer i am on now i have uninstalled and reinstalled java numerous times to no avail. I am at my wits end trying to fix this. does anyone have any ideas.
There is a SQL instance (sql2005) and I am trying to add a new distribution. Replication wazard says:
SQL Server is unable to connect to server 'SERVER1'. (New Publication Wizard)SQL Server is unable to connect to server 'SERVER1'. (New Publication Wizard)
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'SERVER1'. (Replication.Utilities)
There is the only local instance of the server on local computer and 'SERVER1' is actual name.
hi, im making a log in using the asp.net web site admin tool the probably is when click n the security tab it says it cannt connect to the aspnetsqlprovider. thanksdomal
The error occurs when I try to configure SQL server express. Please help. An error has occured while establishing a connection to the server. When connectiong to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (Provider: Named Pipes Provider, error: 40-Could not open a connection to SQL Server)
Hello all,I try to configure the website by using the built in tool of vs2005. When i click the button from Website -> ASP .NET Configuration.when the main page is displayed, i clicked the security, the error shows like:---------------------------------------- There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database.---------------------------------------How to enable connection to sql server? Thanks
I have a problem that unble to connect the SQL Server2005 on Vista OS. After searching solution around but still not able to find the solution for me problem. The Error was Error 26, provider:SQL network interfaces, error:26 - error locating server/instance specified
Is any1 facing the problem on this? Any solution for this case?
To All Members,When I create a new project and try to use the ASP.Net web application administration :security tab, I get the following :There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. I am using Microsoft Visual Web Developer 2005 Express Edition with a local MS SQL Server 2000.I am new to all of this so a little help would be greatThanks.please mail me to dehackers@linuxmail.orgor izzuan@malysia.com
Hi, I am working through "Sams Teach Yourself ASP Dot NET 2.0 in 24 Hours" I am upto hour 20 where it says Configuring an ASP.NET Website to Support Membership To configure our website to support membership, we must launch the ASP.NET Website Administration Tool. To accomplish this, either click the ASP.NET Configuration icon at the top of the Solution Explorer or click the Website menu's ASP.NET Configuration option. Either way will open a web browser pointed to a page through which the ASP.NET site can be configured. Figure 20.1 shows the ASP.NET Website Administration Tool. To add user account support, click the Security link. This will take you to the Security screen shown in Figure 20.2. From this screen, you can specify the user accounts in your system, what roles for users exist, and the access rules for users. However when I click security I get the following error message; "There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store." "The following message may help in diagnosing the problem: Unable to connect to SQL Server database." If I test the provider I get this error; "Provider Management""Could not establish a connection to the database.""If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider." I am using MS VWD Express with MS SQL Express. I have run the 'aspnet_regsql' tool on my database which the book fails to mention and verified that the tables were created correctly. I have tried copying the MDF file directly into my 'app_data' directory but this made no difference. I have googled these errors and nothing seems to help. I can connect to the database through a 'SqlDataSource' and have had no trouble with the database in the previous sections of the book. I think it may have something to do with how I setup SQL Express or database permissions, I hope someone can help. Thanks in advance. Here is a copy of my web.config; <?xml version="1.0"?><!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig --><configuration> <connectionStrings> <add name="MyFirstDatabaseConnectionString" connectionString="Data Source=.;AttachDbFilename="C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataMyFirstDatabase.mdf";Integrated Security=True;Connect Timeout=30;User Instance=True"providerName="System.Data.SqlClient" /> </connectionStrings><appSettings/> <system.web><!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. Visual Basic options: Set strict="true" to disallow all data type conversions where data loss can occur. Set explicit="true" to force declaration of all variables.--> <compilation debug="false" strict="false" explicit="true" /><pages> <namespaces><clear /> <add namespace="System" /><add namespace="System.Collections" /> <add namespace="System.Collections.Specialized" /><add namespace="System.Configuration" /> <add namespace="System.Text" /><add namespace="System.Text.RegularExpressions" /> <add namespace="System.Web" /><add namespace="System.Web.Caching" /> <add namespace="System.Web.SessionState" /><add namespace="System.Web.Security" /> <add namespace="System.Web.Profile" /><add namespace="System.Web.UI" /> <add namespace="System.Web.UI.WebControls" /><add namespace="System.Web.UI.WebControls.WebParts" /> <add namespace="System.Web.UI.HtmlControls" /></namespaces> </pages> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Windows" /> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors>--> </system.web></configuration>
Hello everyone, I've been using the tutorial located here.I am using Microsoft Visual Studio 8.0.50727.42, Microsoft SQL Server 2005, and Microsoft .NET Framework 2.0.50727 SP1.The tutorial uses the SQL Express version and I cannot get it to connect to the standard SQL Server 2005 version. I have used the website ConnectionStrings.com and the whitepaper located here and I wasn't able to get my web app talking to the database through many attempts.I am using a database in Microsoft SQL Server 2005 named SecurityTutorials. This is located on my local machine. There is a login named SecurityTutorials and a user in the SecurityTutorials database named SecurityTutorials who has default schema dbo, who owns the db_owner schema, and has role membership to db_datareader, db_datawriter, and db_ddladmin. The password of this user does match the password in the connection string in web.config, I have verified this multiple times.The problem comes when I open up the CreatingUserAccounts page of this tutorial. When I hit the button 'Create the User Account,' nothing happens. And no record is inserted into the database.Here is my web.config file (if you need any other files then please let me know and I can post them but it is my understanding that this is the only file responsible for the database connection):<?xml version="1.0"?><!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in WindowsMicrosoft.NetFrameworkv2.xConfig --><configuration> <appSettings/> <connectionStrings> <add name="SecurityTutorialsConnectionString" connectionString="Server=localhost;Database=SecurityTutorials;User Id=SecurityTutorials;Password=**********;" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <membership defaultProvider="SecurityTutorialsSqlMembershipProvider"> <providers> <!--Add a customized SqlMembershipProvider --> <add name="SecurityTutorialsSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="SecurityTutorialsConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="SecurityTutorials" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="false" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms"> <forms slidingExpiration="true" timeout="60" /> </authentication> <machineKey decryption="AES" validation="SHA1" decryptionKey="1513F567EE75F7FB5AC0AC4D79E1D9F25430E3E2F1BCDD3370BCFC4EFC97A541" validationKey="32CBA563F26041EE5B5FE9581076C40618DCC1218F5F447634EDE8624508A129" /> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> </system.web></configuration>Note: The password is an actually password. Not sure if it'd be a good idea to post that here, even though it is a test database.Thank you all in advance for your advice!
I am currently trying to connect to a SQL Server instance with my host provider. I am having issues trying to connect to it.
I am using a Linkysys router and I have opened up the ports that SQL Server needs but I am getting an error - "SQL Server does not exist or Access denied". I've contacted the support but they are telling me it is an error on my end.
I'd be really grateful for some help.I have successfully installed the SQL server on my xp home edition machine but everytime I try to connect through the Data Matrix i get the message 'unable to connect to database sever. Log in failed for user sa.' I am entering 'local host' for server 'sa' for user and my password but I cannot connect.I saw Harish Rangathans article about this where he suggested going to the Enterprise manager and then the properties box to fix the problem but my version of the server only has a server manager and no properties box to enter to fix the problem.Is there anyone out there with any ideas about how to fix this problem.
My VS 2005 website project was connecting to a remote SQL Server. But after I move the database to the second SQL Server, I got the following error message from running my website project:
Named Pipes Provider: Logon failure: unknown user name or bad password.
I do everything same like what I did in the first SQL server:
Using “SQL Server and Windows� authentication and “System account�; Create a domain account IIS_WPG; Grant this IIS_WPG as db_owner for the database; In web.config, add the name and password to the end of connectionstring; Make sure the SQL Server has “Named Pipes� and “TCP/IP� protocols.
I have no idea what I can do else, anybody has suggestions?
hello guysI'm trying to access a sql server database through an asp.net web application and I get the following message"login failed for user 'MYCRAYASPNET' " where MYCRAY is the server name. I enabled mixed mode authentification to the server and created a user "ASPNET" for the database. But while creating the user, enterprise manager never asked me to supply a password.does anybody know what's going on here?Thanks for any input.Naby.
HI all,I have hosted my ASP.Net application to a Hostingserver.My application fails to connect to the databaseserver, and promts error "Object refrence is not set to an instance of anobject"This Error is due to Drop Down Lists which query datafrom the database. I am using the connection string "Data Source=xxx.xxx.xxx.xx; Initial Catalog=shopadvizor;User Id=user1;Password=pass"The IP address above works fine when I Register andconnect the Remote database Srever with my Enterprisemanager. I can even query the database from my Local enterprise manager to the remote machine database server. Really Lost Need some help.Regards
