Hi everybody
my problemis that i cannot create data base in vwd xpress edition
when i right click on data connection the only enabled option it show is .."Add connections"
create date base option is disable tell me or advised me what to do now ..???
waiting for guru replies.
regards
Hussain
Hi,
I'm trying to set up a transactional replication from SQl Server 2005 to SQl server 2000. The Distributor and the publisher are on our server and the subscription is supposed to be on a SQL 2000 server on a different location. Before upgrading to 2005 I didn't have problems - the replication from 2000 to 2000 was working perfectly.
After I succesfully created the distributor and the publication the first problem that I encountered was that when I tried to create the subscription it was giving me an error that I cannot use an IP to acces the server. I realized to fix that issue by creating an Alias in the SQL Server Configuration Manager for the server where I wanted to create the subscription (a push subscription).
Now when I try to add the subscriber it gives me another message "Execute permission denied on object 'sp_MS_replication_installed', database 'master', owner 'dbo'" - so I cannot create the subscriber.
The user that I use to create the subscriber on the 2000 server is dbo for the subscriber database but it doesn't have rights on the master database. Also I realized that on the 2000 server I still have the old subscription but I cannot delete it - for the same reason - no access on the master database. Before upgrading to 2005 I had the exact same rights on the 2000 server.
Any help would be appreciated.
Thanks.
Ok, here we go...
I need to make a program, that handles a database.
The database needs to be in SQL and i also need to use dot.NET
I chose to use VB to make the program, and so far i have made a basic database using Access as the database handler.
Now im starting on trying to learn SQL, and while there are SO many resources out there to teach me how to control SQL, theres nothing that shows me how to build a front end for the database, and build a program so that a person can create/delete/modify databases, and all the tables and data in the databases themselves.
Im a little bit lost, i dont exactly feel out of my depth, because i know i can work this out, i just need some guidance!
Any help??
I used SQL Server 2012 Management Studio to create a new table on an 2014 SQL Server instance and got this message: 'This backend version is not supported to design database diagrams or tables'. Does this mean that I have to have SQL Server 2014 Management Studio to create a table on a SQL Server 2014 instance?
View 1 Replies View RelatedI have been following Creating a Mobile Application with SQL Server Mobile:
http://msdn2.microsoft.com/en-us/library/ms171908.aspx
I have successfully created the snapshot.
When performing the following:
Configure the publication for Web synchronization
In SQL Server Management Studio, in Object Explorer, expand the (local) computer node.
Right-click the Replication folder, and then choose Configure Web Synchronization
There is no option when Right-clicking the Replication folder under my local server, however there IS an option for Configuring Web Synchronization on the Replication folder under SQL Server Mobile. (Unfortunately the Configure the publication for Web Synchronization is listed BEFORE the SQLServer Mobile Task, so it is pretty confusing) So, assuming this is what the author meant, I successfully configured the Web Server and the SQLMobile shows under my default web site.
When I attempt to create a Subscription under SQLServer Mobile, I get the following error:
- Synchronizing Data (Error)
Messages
Unexpected HTTP status returned. [ 415,status = ]
HRESULT 0x80004005 (28632)
The operation could not be completed.
Am I missing something? Should the web configuration be done on my local SQL Server, not the SQLServer Mobile replication directory? If so, how come I do not have that option as suggested in the directions?
I have checked and rechecked permissions. As I mentioned, the snapshot is successfully created (verified by Right-clicking the publication and viewing the snapshot agent status)
I have recently installed Microsoft SQL Server 2005 Express. The installation seemed to go OK (Dell Optiplex I86, Win2K).
The SQL Server Management Studio Express (also installed OK) appears to connect to the database server and shows the database tree as I would expect, consisting of Databases, Security, Server Objects, Replication, and Management.
However, when I attempt to create a new data source (Control Panel->Administrative Tools->Data Sources(ODBC ->ODBC Data Source Administrator -> Add->SQL Server)
Name: MYSQLS1
Descr: Test SQL Server
Server: (local)
(Next->)
x With Windows NT Authentication using the network login ID
[Client Configuration]
Server Alias: MYSQLS1
Server Name: MYSQLS1
x TCP/TP
x Dynamically determine port [1433]
(Next->)
RESULT:
Connection failed:
SQLState: '01000'
SQL Server Error: 11001
[Microsoft][ODC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Connect()).
Connection failed:
SQLState: '08001'
SQL Server Error: 6
[Microsoft][ODC SQL Server Driver][Shared Memory]Specified SQL Server not found.
Can anyone please tell me what's going on here ? What am I doing wrong?
What is the needed permission to create credential except for sysadmin?
Already granted securityadmin but still user does not have permission to perform this action.
I'm, using my script to many location to create folder to save output files and if the folder is removed/not present it can create it without any noise. But the problem is, while I use the same sort of script to check if a folder is present in the sharedpath it will not create it to copy all bkp files from local to remote path works good, but if you delete the folder or rename the exisitng folder and if the below script tries to create the folder it created as "fILE", very interesting. Per IT team they have given SQL Server account the full rights to create/delete/alter folder/files.
Do I need to use seperate script or way to create / alter folders in the sharepath?
SET NOCOUNT ON
Declare @len INT, @i INT, @Left varchar(max), @right varchar(max), @SERVERNAME sysname,@finalServer sysname
declare @rc int, @dir nvarchar(4000)
DECLARE @cmd1 sysname, @cmd2 sysname, @cmd sysname;
Declare @extPAth varchar(max)
[Code] ....
Hi ,
I have just downloaded an evaluation version of SQL server from the microsoft website and installed it in my PC.
Now I want to create file data source.
I followed these steps:
-From the control panel, ODBC datasource admin
-click the DSN tab
-click the add button
-select the sql server driver, enter the data source file name
-enter "local" in the server text box as I installed the sql server in my standalone PC.
-click next
After that I had this error.
"Connection failed. SQL server does not exist or access denied."
But The sql server service is running.
Can anyone help me where did my configuration go wrong??
Thanks...
Nov
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
I'm having some problems debugging SQL Server stored procedures on a SQL Server 2005 server. I have installed Visual Studio 2005 on a workstation running Windows XP, now I'm trying to debug a ASP.Net web application that has some code that executes the stored procedures on a Windows 2003 Server running SQL Server 2005.
I opened VS2005 ... created a connection to the SQL Server 2005 instance ... open the Stored procedure ... right click the stored procedure name and selected Step into Stored Procedure and the following message is displayed:
Unable to start T-SQL debugging.Could not attach to SQL Server process on 'ServerName'.
Any ideas.
Thanks,
PHP Code:
INSERT INTO [GPO].dbo.tblMetric  (KPI_ID, METRIC_ID, GOAL, REPORTING_MONTH, ACTUALS)Â
SELECTÂ
   Â
      1 AS KPI_OWNER_ID
    , 23 AS METRIC_IDÂ
    , .75 AS GOALÂ
    , CAST(Z.REPORTING_MONTH as DATE) AS REPORTING_MONTH
    , SUM(CAST(FTP_COUNT AS DECIMAL))/SUM(CAST(FULL_COUNT AS DECIMAL)) AS ACTUALS
[Code] ....
The insert column I am trying to get into is a date type. The original state of the field is YYYYMM varchar. How to get this into the table.
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
Hi,
I have soma ado.net code that inserts 7 parameters in a database ( a date, 6 integers).
I also use a self incrementing ID but the date is set as primary key because for each series of 6 numbers of a certain date there may only be 1 entry. Moreover only 1 entry of 6 integers is possible for 2 days of the week, (tue and fr).
I manage to insert a row of data in the database, where the date is set as smalldatetime and displays as follows: 1/05/2007 0:00:00 in the table.
I want to retrieve the series of numbers for a certain date that has been entered (without taking in account the hours and seconds).
A where clause seems to be needed but I don’t know the syntax or don’t find the right function
I use the following code to insert the row :
command.Parameters.Add(new SqlParameter("@Date", SqlDbType.DateTime, 40, "LDate"));
command.Parameters[6].Value = DateTime.Today.ToString();
command.ExecuteNonQuery();
and the following code to get the row back (to put in arraylist):
“SELECT C1, C2, C3, C4, C5, C6 FROM Series WHERE (LDate = Today())�
WHERE LDate = '" + DateTime.Today.ToString() + "'"
Which is the correct syntax? Is there a better way to insert and select based on the date?
I don’t get any error messages and the code executes fine but I only get an empty datatable in my dataset (the table isn’t looped for rows I noticed while debugging).
Today’s date is in the database but isn’t found by my tsql code I think.
Any help would be greatly appreciated!
Grtz
Pascal
How can I get file created date of a text file using TSQL.
Thank You
Nad
i have a DVD set of Visual Studio 2005 Professional Addition. I copy all of its components on my hard disk and then start downloading Visual Studio 2005 Professional Addition from the folder that i have copied on my hard disk. The installation process installs every think visual studio, .net framework 2.0, parser etc but when it reached to insatll SQL Server 2005 , it displays an error "Microsoft SQL Server 2005 setup has encountered an error and will end" and The following components falied to install " Microsoft SQL Server Express Edition x86". I then uninstall the whole visual studio using autorun and then reinstall it, but the problem remain there. Then i search this issue on net and i found an article according to which, i uninstall visual studio again but now this time i manually uninstall the components by folowing the sequence which is given in the that article. Then i delete all the folders and files from the temp folder and again install the visual studio but the problem still exists. I dun know why it is not installing. Please, if anybody knows the solution, reply me soon.
Thanks ...
and sorry for my english.
Hi, I'm not a DBA and our DBA is not available.
I get the following error for my connection string when I try to connect to a specific database on the SQL Server 2005:
Below is the connection string:
cnn = "data source=" & CompanyT & ";driver=VPC-002BALGORD\SQLEXPRESS;AttachDBFilename=" & ArInvoice.FilePath & ";username=sa;password=balgord;Trusted_Connection=no"
SQLdb.Open cnn
I get the following error:
[Microsoft][SQL Native Client][SQL Server]Login failed for user. the user is not associated with a trusted SQL Server connection
Mixed mode is set in the Server Security properties (SQL Server authenticaion and Windows Authentication).
I searched googled and everyone says set the authentication to mixed mode... It is set to mixed mode so I'm all out of ideas. I think if there was an error in the connection string it would give me a different error right? I dont know I'm all out of ideas, any help will be greatly appreaciated.
Thank you.
Regards,
Irena V.
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
Hi,
I€™m unable to install SQL Server 2005 on Win XP Professional 2002 SP2. I tried both with SQL Enterprise and Express editions nothing works. It seems to be installed but I can not find the management studio. Some one PLZZZZZZZZ suggest what to do in order to get it installed.
Thanks,
Hari
Hello,
i cant installthe service pack 2 for sql server 2005.
i get this error code 1063.
what does that mean ?
thank you
I get to the point of starting the services and receive the following message after about 4 minutes of trying to start. I tried in Mixed Mode and Windows Authentication Mode. Message:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlScript%40sqls%3a%3aService%3a%3aWaitForServiceState%40x41d
------------------------------
BUTTONS:
&Retry
Cancel
------------------------------
Previously, I have installed SQL 2005 developer edition simplyfied chinese
successfully. But yesterday, I tried to install mobile client software
factory. The installation process create a database as following:
Create DATABASE [AdventureWorksMobileStaging] ON PRIMARY
( NAME = N'AdventureWorksMobileStaging', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging.mdf' , SIZE = 195584KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
( NAME = N'AdventureWorksMobileStaging_log', FILENAME = N'C:GotDotNetMCSF_728ReferenceImplementationsAdventureWorksToGoDBScriptsAdventureWorksMobileStaging_log.ldf' , SIZE = 265344KB , MAXSIZE = 2048GB , FILEGROWTH = 10%)
But today, when I start my notebook, SQL server could not be started.
Then I uninstalled the SQL instance by start->control panel->uninstall...The uninstall
process seems OK. Note that I only uninstalled the instance.Then I tried to reinstall
SQL 2005. However it was reported a Performance Monitor Counter registry key mismatch
error occures. I tried to fix it but failed. The problem is as following:
1, The installation process report a warning of low memory.
My notebook has 512M memory. I have reinstalled SQL 2005 once successfully. At that
time, the warning also shows, but it seems that this warning does not affect installation.
2, User type problem.
The OS of my notebook is XP professional, which is upgraded from XP home edition.
I login it using a domain user such as: "my company's domainmyaccount". I found it
curiously that although I assign myaccount as an Administrator, it will automaticly
changed to "SQL$...." account. I don't know why and when the account property is
changed. But everytime, when I found, I will assign myaccount as an Administrator
back.
3, Performance Monitor Counter registry key problem.
To fix the problem, I firstly tried to run lodctr.exe in cmd window but failed.
When I cd to c:windowssystem32 dir, I can ran lodctr.exe correctly.
I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib,
the result is:
"Last Counter"=dword:0000149c (11128)
"Last Help"=dword:0000149d (11129)
Then I check HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionPerflib 09
and 004, the result is confusing. I can find counter and help key,but both keys contains
really a lot of stuff as:
(1) first page of Counter key:
1
1847
2
System
4
Memory
6
% Processor Time
10
File Read Operations/sec
12
(2) first page of Help key:
3
The System performance object consists of counters that apply to more than one instance of a component processors on the computer.
5
The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random access memory on the computer. Virtual memory consists of the space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes.
7
% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the duration of the idle thread is active in the sample interval, and subtracting that time from interval duration. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It is calculated by monitoring the time that the service is inactive, and subtracting that value from 100%.
9
% Total DPC Time is the average percentage of time that all processors spend receiving and servicing deferred procedure calls (DPCs). (DPCs are interrupts that run at a lower priority than the standard interrupts). It is the sum of Processor: % DPC Time for all processors on the computer, divided by the number of processors. System: % Total DPC Time is a component of System: % Total Privileged Time because DPCs are executed in privileged mode. DPCs are counted separately and are not a component of the interrupt count. This counter displays the average busy time as a percentage of the sample time.
11
File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval.
I could not find the maximum value of the Counter key and help key, so I could not repair
Last Counter and Last Help key as discribed at SQL 2005 help. Which item correspond to
maximum value of the Counter key and help key?
I tried to correct Last Counter and Help key as:
"Last Counter"=dword:0000149c (5276)
"Last Help"=dword:0000149d (5277)
But it also doesn't work.
Hi theres,
I have installed SP2 on my server (Window server 2003 and SQl Server 2005 standard Edition both are 64 bit). But when i query SELECT @@VERSION. i got that latest installed SP is SP1.Even i have installed SP2 successfully and interactively then where m wrong(Window server have Sp2)
Hello all,
I have tried to install SQL Server 2005 Standard edition with CLUSTERING. I faced a problem and everything rolls back.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup was unable add user domain1xyz to local group domain1IT Security Admin-Group.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29512&EvtType=sqlca%5csqlsecurityca.cpp%40Do_sqlGroupMember%40Do_sqlGroupMember%40x6ba
I have refered to PostI=1659185 posted by Fly and it still won't be able to fix my problem.
I have added LOCAL SERVICE into the local group (SQLServer2005MSFTEUser$AAA$MSSQLSERVER), but it still can't work.
Please can someone help me on this. Thank a lot....
I have deployed some reports on the reporting server, i have noticed that every one in the domain in which the reports are published can access the reports, except one user. when he tries to access the report he got the following error message or the blank report.
"An error occured during report processing"
"can no read the next data row for the data set dataset1".
Although this user has all the roles on the reporiting server kike browser,content manager etc.
i tried many things but still problem persists.
Can anyone tell me the exact reason for this ?
I shall be extremely thankfull.
Hello Experts,
I have been unable to install SQL Express 2005 Server on my Windows 2003 Server (with SP2 installed). I keep getting an error message saying that Microsoft Windows Installer 3.1 is not installed.
Click here for image
So, I downloaded Microsoft Windows Installer 3.1 v2 (WindowsInstaller-KB893803-v2-x86.exe) but whenever I try to install it I get an error message saying that "the Service Pack version of this system is newer than the update you are applying" and that there is no need to install the update and it stops there.
Click here for image
Is there a workaround to this? How can I get Microsoft Windows Installer 3.1 installed? I tried going to the Windows Update site, I already have everything installed and I even started the Windows Installer service manually. Has anyone else experienced this?
How can I get SQL Server 2005 Express installed if not how can I install SQL Server 2000 on tihs machine? The only reason I am trying to install SQL Server 2005 is because wanted to try it so I uninstalled SQL Server 2000 now I can no longer install SQL Server 2000 again because it won't let me because of the SP2 patch.
Help! :(
Hi,
I€™ve developed a BI system using the SQL Server 2005 Developer€™s Edition.
SSAS, SSIS and SSRS have been added to a SQL Server 2005 Standard Edition Server in preparation for delivering the developed database to this live environment.
So I am able to connect directly to the Database Engine, SSAS, SSIS and SSRS successfully from the actual SQL Server 2005 Standard Edition box which is sat on a Windows 2003 Server operating system.
However when I launch SQL Server Management Studio from a desk top PC which is connected to the SQL Server Standard Edition box I can€™t connect to either SSIS or SSRS, however I can connect to the Database Engine and it also seems that I can connect to SSAS OK.
I am using Windows Authentication where the I used a SQL Server account which exists with €œsysadmin€? permissions and this SQL Server account has the same login name as the Windows Server 2003 desktop login.
What do I do next please?
I am developing an app in VB.Net 2005, and I installed SQL Server 2005 locally on my machine. My app access multiple databases on SQL and has worked like a charm in the past. Today, when I go to access my app, I receive an error when trying to connect to the SQL database.
"An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL server does not allow remote connection"
As I said before, this is a local install and worked fine until today. I checked the services running and Here is what I have:
SQL Server Integration Services - Running
SQL Server FullText Search - Stopped
SQL Server(SQLEXPRESS) - Running
SQL SERVER (MSSQLSERVER) - Stopped <---------- I tried restarting this and it times out
SQL Server Analysis Services (MSSQLSERVER) - Stopped
SQL Server Reporting Services (MSSQLSERVER) - Stopped
SQL Server Browser - Stopped
SQL Server Agent (MSSQLSERVER) - Stopped
I am unable to start any of these services... they all time out. Any help would be greatly appreciated!
When I try to un install SQL Server Express (VS 2005 Beta 2), which is not functional, I get an error message:
View 5 Replies View RelatedNot sure if this is the right forum to post this...
After going through lot of old posts in various forums and changing lot of settings, i'm still not able to access my Server remotely.
This is Windows 2003 Server machine with Sonicwall Firewall, i have allowed Port 1433 in both Firewall and ISA and call is getting through but i'm getting following error msg :-
{"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"}
This machine is also having Sql Server 2000, and the SQL Server 2005 is installed with named instance.
My connection string is :-
"Data Source=192.168.0.1MYSERVER;Initial Catalog=MyDatabase;Integrated Security=True"
In example above, i'm showing dummy values but actual string is having the actual live IP address and correct named instance and database.
If i use a local address like 192.168.0.1 then i'm able to connect.
My TCP/IP Address in Sql configuration is having my Live IP Address and the port 1433.
Any help will be highly appreciable..
I have completed the uninstallation instructions for my beta versions of SQLExpress (repeatedly). I have used the manual unistall procedures also. I have physically removed the SqlServer directory from the the Program Files directory. The result is the same. This message appears every time I try to to install the MS SQL Advanced package:
"SQL Server 2005 setup has detected incompatible components from beta versions of Visual Studio, Net Framework, or SQL 2005. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme."
The detailed instructions are NOT detailed enough.
I have uninstalled the .NET 2.0 package and re-installed it. The SERVICES window still lists the SQL Server as present even though it is not started.
Any suggestions?
I'm attempting to install SQL Server 2005 Standard, on my personal PC which isn't on a network, there are no user accounts besides myself, I'm signed-on as admin.
The logs from C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG, all appear successful, although there are many more logs.
When I look under Control Panel/Administrative Tools/Services, I see no service at all for SQL Server.
I attempted to use the SQL Server Surface Area Configuration Tool, which told me no instances of the data-base had been loaded.
I must admit, the install went a bit too fast for me to believe it was correct. I was never even asked for the product-key.
This particular copy, was bundled with Visual Studio 2005 Pro, which was given to me by someone who attended a Microsoft seminar/demo of some sort.
I've never used SQL Server before, and know nothing about it, so I hope I'm posting in the right forum.
Any help would be appreciated, and I can provide listings of any log-file if needed.
Thanxxxxxxxxxx in advance for any replies. I'm studying for MCTS, and am trying to work through ADO.Net Step by Step.
Hi,
We recently installed Sql 2005 server and it was working fine. But today one of our user reported that they could not able to connect the sql server 2005 from the application. When I checked the error log, I found the following error for every one minute. We restarted the sql service on this sql 2005 instance but still we are getting the same error.
SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed.
Could any one help us on that?
Regards,
Sankar