i want to get latest updated date on each transid and only for status =approved .
-------------------
out put would be
------------
idtransid date status
31013/1/2014 approved
61031/2/2014 approved
table
-----------
idtransid date status
11011/1/2014 approved
21012/1/2014 close
31013/1/2014 approved
41021/2/2014 approved
51022/2/2014 close
61031/2/2014 approved
if there are 2 records with different date how to write query for ----> get record with latest date
View 4 Replies View RelatedI want to get latest updated date on each transid and only for status =approved .
-------------------
out put would be
------------
idtransid date status
31013/1/2014 approved
61031/2/2014 approved
table
-----------
idtransid date status
11011/1/2014 approved
21012/1/2014 close
31013/1/2014 approved
41021/2/2014 approved
51022/2/2014 close
61031/2/2014 approved
WE are unable to get the latest data from the relation which is having duplicate entries.
View 1 Replies View RelatedMy table are
Customer: customerId ,name
Order: orderId, customerId, product,date
I want to display latest order from the customer
I have table has column called [last modified date] it has time too , i need to get the [latest modified date] for particular ID , there are many updates to the ID and i just need the latest date.
[PAX ID] | [Last Modified Date]
1 2013-01-02 18:23:00
1 2013-01-02 11:42:00
3 2013-01-01 09:00:00
3 2013-01-08 16:05:00
5 2013-01-01 09:09:00
Greeting guys, does anyone here experience the problem that I had currently. I did set up a mirroring for my db for 1 month + and work perfectly. However, due to lack of stability on line connection on the principal database side, so makes mirror side get disconnected frequently. I found that once the principal side get back smooth, the mirroring status shows 'synchronizing' status and I thought it gets fine again.
However, after 2 days (which more than 48 hours) and I check back the status, it still showing 'synchronizing' and synchronize slowly. It's impossible that the mirror side takes more than 2 days for synchonizing. ( Size on principal size is around 1.2GB and mirror side around 800MB) Is there any solution on it ? Is it have to re-set up the mirroring session again? I don't think is line connection issue because I did set up another mirroring session between these two servers and work fine. Hope you guys can help me out asap. Thx.
Best Regards,
Hans
CREATE TABLE #Dateissue
(ID int,
Code nvarchar (20),
Datein datetime,
Declined datetime )
[Code] .....
I have a table here.  I want  find a way of getting the latest date, when the code is the same.  If the Declined date is null.  Then I still want the latest date.  E.g. ID 3. Â
If the declined date is filled in. Â Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but  i got an error message when trying this out.  Against the code Â
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. Â What do I need to do to get both my outputs working?Â
Here's what I'm trying to do
TransIDMemberIDFundIDBuyPriceDate
1501101$1042013-01-24
2501102$1012013-04-23
3501102$1182013-02-04
4501102$982013-05-19
5501103$532013-05-21
6501103$392013-07-09
I'm trying to get the latest buy price for each fund a member bought.
So in the above example, I'm trying to formulate a query to retrieve all the latest bought price for memberid 105:
Desire Query Result
TransIDMemberIDFundIDBuyPriceDate
1501101$1042013-01-24
4501102$982013-05-19
6501103$392013-07-09
So far, I've tried using Group By clause on FundID and BuyPrice and MAX() function for the date, but I can' get the TransID.
I have a table that has records layed out as so:Table:fd_Id INT IDENTITY (1, 1)fd_User VARCHAR(30)fd_Effective DATETIMEData could be as follows:1 | "user1" | 6/20/20012 | "user2" | 6/1/20023 | "user2" | 6/5/20024 | "user2" | 6/5/20025 | "user2" | 2/1/20026 | "user3" | 9/1/20037 | "user3" | 10/2/20028 | "user4" | 1/1/2005What I need to retrieve from that table is the SINGLE LATEST item ofeach fd_User.Results:1 | "user1" | 6/20/20013 | "user2" | 6/5/2002 (or 4 | "user2" | 6/5/2002) since the dates arethe same but only 1 of them6 | "user3" | 9/1/20038 | "user4" | 1/1/2005
View 3 Replies View Related
Hi,
Can anyone please let me know the query to get the latest record based on datetime cloumn?
For example, a table with three records:
Name | Application | Start Time
User A | Outlook | 10/01/2007 1:30 AM
User A | Internet Explorer | 10/02/2007 12:30 AM
User B | Internet Explorer | 9/20/2007 8:30 PM
The query gets the below:
User A | Outlook | 10/01/2007 1:30 AM
User B | Internet Explorer | 9/20/2007 8:30 PM
Thanks in advance.
My requirement is to get the earliest start date after a gap in a date column.My date field will be like this.
Table Name-XXX
StartDate(Column Name)
2014/10/01
2014/11/01
2014/12/01
[code]...
 In this scenario i need the latest start date after the gap ie. 2015/09/01 .If there is no gap in the date column i need 2014/10/01
My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID Â Â Â Â Â StartDate
1 Â Â Â Â Â Â 2014-01-01
1 Â Â Â Â Â Â 2014-02-01
1 Â Â Â Â Â Â 2014-05-01-------After Gap Restarted
1 Â Â Â Â Â Â 2014-06-01
1 Â Â Â Â Â Â 2014-09-01---------After last gap restarted
1 Â Â Â Â Â Â 2014-10-01
1 Â Â Â Â Â Â 2014-11-01
2 Â Â Â Â Â Â 2014-01-01
2 Â Â Â Â Â 2014-02-01
2 Â Â Â Â Â Â 2014-03-01
2 Â Â Â Â Â Â 2014-04-01
2 Â Â Â Â Â Â 2014-05-01
2 Â Â Â Â Â Â 2014-06-01
2 Â Â Â Â Â Â 2014-07-01
For Id 1 the start date after the latest gap is  2014-10-01 and for id=2 there is no gap so i need the minimum date  2014-01-01
My Expected Output
id       Startdate
1 Â Â Â Â Â Â Â 2014-10-01
2 Â Â Â Â Â Â Â 2014-01-01
Table has details like below:
NAME UPATE-TIMESTAMP
==== ===============
mary time1
mary time2
mary time3
tom time1
tom time2
tom time3
tom time4
richard time1
richard time2
Output Expected:
NAME UPATE-TIMESTAMP
==== ===============
mary time3
tom time4
richard time2
In summary, the requirement is to fetch the latest upated record for each unique NAME.
I have a table that contains a Ref field and a TransactionDate field. For each Ref field there are mutliple Transactions. I am trying to put together a query that selects the Latest Transaction date for each Ref field in the table.
I tried:
SELECT *
FROM tabMediaTransaction
WHERE (TransactionDate =
(SELECT MAX(TransactionDate) AS Expr1
FROM tabMediaTransaction AS tabMediaTransaction_1))
But this only returns 1 record for 1 Ref field. I need 1 record for each Ref field
I have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature
09/01/2012 73.5
09/02/2012 75.2
09/03/2012 76.3
09/04/2012 73.3
09/05/2012 77.0
09/06/2012 74.5
and so on.
I am using this to get the dates listed:
WITH CTE_DatesTable
AS
(
SELECT CAST('20120901' as date) AS [Date]
UNION ALL
SELECT DATEADD(dd, 1, [Date])
FROM CTE_DatesTable
WHERE DATEADD(dd, 1, [Date]) <= '20120930'
)
SELECT [Date]
FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
I have created the following SQL snippet that is a very simple mock-up illustrating the problem (I hope!) that I am facing:
-- create table
if object_id('tempdb..#tmpdelnotes') is not null
drop table #tmpdelnotes
create table #tmpdelnotes(
DelNote int identity (1,1) ,
DelDate date not null,
Item int not null,
Customer int not null)
[code]...
What I need to retrieve is a unique list of item numbers with information about the latest (DelDate) delivery note. The "Clumsy workaround" works, but is not very pretty when doing multiple table joins. Is it really necessary to use a derived table for this kind of query? Window functions can only exist in the SELECT and ORDER BY clauses, which is understandable since the calculations take place (I would guess) after the aggregations in the HAVING clause.
I work for an organization that repairs serialized devices. Each time a device is repaired it's serial number is recorded in a database table along with the date it was repaired along with other information about the device. There are multiple cases where a unit has been repaired more than once.
I am trying to write a query that will return the serial only once and that record will be the record of the latest repair date. To sum it up,
Return a list of serials where if a serial exists more than once in the table, return only the instance of the serial record(s) with the max(created_dt). The end result will be a list of distinct serial numbers.
Here is my Query. The problem I believe is in my sub-query but I am not sure how to structure it.
SELECT
S.Id
, RMA
, PinSerial
, L4Serial
, L4Model
[Code] ....
guys help please...I have a table with 3 columns (TransactionID, CustomerID, TrasanctionDate) and there could be posibility that one or more rows could have the same value for CustomerID. Now my question is it posible to retrieve the row of latest TrasanctionDate made by a particular customer?
Ex:
TransactionID | Customer ID | TrasanctionDate
1 | 2 | 9/3/2007 12:00:00 AM
2 | 3 | 9/4/2007 12:00:00 AM
3 | 2 | 9/5/2007 12:00:00 AM
4 | 2 | 9/6/2007 12:00:00 AM
Say, i want to retive the latest trasanction of customer with CustomerID equals to 2. The output shoudl be is row 4 since it has the lates date with CustomerID equals to 2
4 | 2 | 9/6/2007 12:00:00 AM
Any help will be greatly appreciated. Thanks in advance!
I have a column which stores dates (datetime data type). I would liketo fetch one data which is the most latest date among them. So if thereare 04/01/06, 05/08/06, 05/12/06, 06/15/06, then 06/15/06 is the one Ineed to output.how can I write this in sql stmt?select datebeginfrom testtablewhere datebegin = ?????I don't think it is simple as I thought. I have no idea what I need towrite in where clause to make this work.thanks.
View 1 Replies View RelatedHow to modify the below procedure in order to get the latest date ( the biggest value ) in the column “Deadline�, type smalldatetime, ( example: 24/02/2007 00:00:00 ) for a given customer “UserName� ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE PROCEDURE GetLatestDate
(@UserName VARCHAR(50)
AS
SELECT Deadline
FROM CustomerItems
WHERE UserName = @UserName
Hello,
If I have a TransactionTableT including with fields like this:
TransactionDateDT
QuantityIN
ItemID,
ItemCodeCH
ItemNameCH
PriceFL
Each time the user make an entry a new record is inserted.
How can I pull only the latest (TransactionDateDT) record for each item. I've tried MAX(TransactionDateDT), but how can I get ItemCodeCH, ItemNameCH and PriceFL.
Basically I need to create a report with the latest price for each item.
Any feedback welcome!
Edi
Hello all. I ma using the following query to pull back data. The MergeHistory table has a column named DateMerged. I am looking to pull back the one record with the most recent DateMerged. I have managed to get the query as far as below but not sure how to select the most recent one. Can anyone help with this? I was told it may be along the line of SELECT TOP 1 or something?
INSERT INTO @List (IndexID, IndexName, MergeSystem, Status, DateCreated, CreatedBy, DataTag, MergedDate)
SELECT DISTINCT
RT.IndexId,
isnull(dbo.ufn_GetBestIdentifier(RT.IndexId), dbo.ufn_GetBestVirtualIdentifier(RT.IndexId)),
dbo.ufn_GetEntitySystemName(RT.IndexId),
RT.Status,
CONVERT(varchar, RT.DateCreated, 106) as DateCreated,
RT.CreatedBy,
RT.DataTag,
MH.MergedDate
FROM @resulttable AS RT, MergeHistory AS MH
WHERE RT.IndexId = MH.EntityID
Aim – Get the latest [hst_date_processed] for every [hst_merchnum]
My query so far is
SELECT top 5
[hst_merchnum]
,[hst_date_processed]
FROM [FDMS].[dbo].[Fact_Financial_History]
where hst_merchnum = '878001897'
group by [hst_merchnum],hst_date_processed
which return the following results
hst_merchnumhst_date_processed
8780018972011-12-01
8780018972012-07-01
8780018972011-11-01
8780018972011-02-01
8780018972011-05-01
However results i need are:
hst_merchnumhst_date_processed
8780018972012-07-01
I am trying to return the latest date in a stored procedure as shown below, but get the error 'incorrect syntax near @strLastDate'
CREATE PROCEDURE spRB_GetLastDateBookingDates
@strLastDate datetime OUTPUT
AS
SELECT max(BD_DateRequired) as @strLastDate
FROM tblRB_BookingDates
GO
RETURN
Hello!
I have a table something like this:
ID INTEGER
Info VARCHAR (actually several columns but that is not important here)
DAT DateTime
For each ID there are several dates and for each of these dates there are several rows with different info. I would like to select the latest info for each ID. For example:
ID - DAT - Info
1 - 2007-02-01 - Info1
1 - 2007-02-01 - Info2
1 - 2006-02-01 - Info3
2 - 2007-05-05 - Info4
2 - 2007-02-01 - Info5
2 - 2006-02-01 - Info6
I would like to get:
Info1
Info2
Info4
This has to be done in one Query. Can anybody help me?
Hi,
How to get the latest date from ColumnDateTime?
and the earlier as well ?
I want to select the latest single value based on ProductID. The value should be the last value inserted from the Date column.
I want to use this as part of a query to delete this value when a button is slected in ASP.Net C#.
Here is my code which does not work
select basketID, SessionID, UserID, MAX(Date), productID from ShoppingBasket
where userID = '1'
group by productID, basketID, SessionID, UserID
I have the following table:
Item Date
A 2015-01-02
A 2015-03-01
A 2015-02-17
B 2015-01-07
B 2015-03-20
C 2015-01-02
C 2015-03-17
C 2015-01-14
C 2015-02-02
D 2015-03-25
E 2015-02-09
E 2015-02-09
Is it possible to get a list with only one of each item and then the latest date possible?
> This is what I want to do with the data table below.[color=blue]>> I only want it to show one id for each issue. ( ie, 4001 only once,> 4002 only once, etc. But only the one with the latest date and time)>> Ie. 4001 should only be in the table once, with the latest date -> which should be :> 400109/12/200317:12:09 (as I only want to show the last time> the id was updated - do you get me now )>> Ie. 4002 should show only 400211/12/200315:25:13>[/color][color=blue]>>> idhs_change_datehs_change_time> 400127/10/200310:38:27> 400109/12/200314:43:58> 400109/12/200317:12:09> 400227/10/200310:56:28> 400209/12/200314:44:11> 400211/12/200315:25:13> 400327/10/200311:13:12> 400309/12/200314:44:21> 400310/12/200310:48:02> 400310/12/200313:25:09> 400427/10/200311:28:09> 400409/12/200314:44:29> 400409/12/200317:18:28> 400527/10/200315:55:40> 400528/10/200310:18:24> 400627/10/200315:59:47> 400628/10/200310:18:38> 400609/12/200314:44:40> 400609/12/200316:47:15>[/color]
View 3 Replies View RelatedI have 6 columns, all with dates within them, i.e.Proposed Start Date 1Proposed Start Date 2Proposed Start Date 3Proposed Finish Date 1Proposed Finish Date 2Proposed Finish Date 3What I need to do is narrow this down into two fields:Start DateFinish DateSo I need to find the newest value from the columns. i.e.If PS1 filled PS2 and PS3 empty, then Start Date = PS1If PS3 empty and PS2 filled, then Start Date = PS2If PS3 filled then PS3and similarly for Proposed Finish Dates.Anyone knew how I can do this.(Maybe the following will help for the programmers out there:If PS3 <> nullThen StartDate = PS3Else if PS2 <> nullThen StartDate = PS2ElseStartDate = PS1End IFJagdip
View 5 Replies View Relatedon SQL Server 2000
They show only Create date
but I need know update date
because I install my system on customer's site and solve problem on customer site
and I can't bring all stored procedure back to my office and restore all stored
because of my database have two projects.
Please Help me.....
I have a equipment table and the equipment has a coding for each place / location or custody it has had during its life. I need to select the latest (newest) row for each piece of equipment by getting the newest from_date and to_date field combination.The following is an example. I know how to get MAX date for one column but not with two columns (from and to DATES).
ID
NAME
FROM_DATE
TO_DATE
[code]...