Unable To Locate Security Server
Feb 28, 2007
Dear all,
I have installed JDE E1 Demo to my computer, which use SQL Server 2000. And the OS of my computer is Vista Home Prerium.
When I start the JDE, I met an error message, "Unable to locate security server". Cause this version of JDE could be running on XP, I guess if the problem is because of the combination of Vista+SQLServer2K.
I have checked that IIS is ok installed, the computer services are started automatically. But I have one strange phenomenon that after computer started, it seems that the SQL server service manager couldn't find the right server & service, so that server couldn't been started automatically.
Could you make some sense and show me some hint about this problem? Or could you tell me how the SQL service manager find the the server and service?
I have installed SQL Server 2005 in my computer but in different root, in addition.
Many thanks and Regards,
Viesta
View 2 Replies
ADVERTISEMENT
Jan 10, 2012
I am trying to reorganise the log files on a server, (long story short they are fragmented so I want to shrink and reset the initial size and growth) and I am unable to shrink them. When I run the following:
use test
DBCC SHRINKFILE(test_log, TRUNCATEONLY)
--or
use
DBCC SHRINKFILE(test_log,2, TRUNCATEONLY)
I get the following message:
Msg 8985, Level 16, State 1, Line 1
Could not locate file 'test_log' for database 'test' in sys.database_files. The file either does not exist, or was dropped.
I get this message for every database on the server. I got the logical name of the file using sp_helpfile and have checked it against sys.masterfiles, sys.database_files and sys.sysaltfiles, all match up and confirm the name 'test_log'.
I rebooted the server last night and was able to shrink the first couple of .ldf's I tried so I presumed it was fixed. This morning when I try again i get the sanme error, I don't see anything in the SQL server or system logs that indicates a change.
I am able to add new log files and remove log files, however if I add a new log file (test_log2) and then try and truncate that file I get the same error.
View 9 Replies
View Related
Feb 27, 2006
I am creating a table on the fly and then trying to associated the table
inside of a cube, using vbs script. For some reason I get a table not found
error when I try and open the cube, but when I look at the SQL server I am
able to see the table and I can insert the table via analysis manager, but I
get Unable to retrieve the list of columns for the <table name> table.
Any Ideas why I am not able to add the table from the analyzer?
View 10 Replies
View Related
Jun 12, 2015
I am having Windows 2012R2 Std with SQL2012SP2. Trying to add SQL cluster node2 but unable to locate the instance name when I click on drop down button.Understand that SQL Server Agent is required but it is not listed as cluster resource. Therefore, I perform the followingFrom Windows Power Shell with Administrator rights
1. Import-Module FailoverClusters
2. Add-ClusterResourceType "SQL Server Agent" c:windowssystem32SQAGTRES.DLL
Error: Add-ClusterResourceType : Unable to locate the cluster service executable on node1.The network name cannot be found.No problem to ping all cluster related names as well as fail-over to and from next available node.
View 3 Replies
View Related
Apr 30, 2007
Hello Friends,
I have created few reports in SSRS 2005 on Windows 2003 Standard. Previouly I was not able to view reports from my .ASPX page which contained a ReportViewer, after going throuhg some other threads I was able to create a snap-shot for my reports . But still I'm not able to view reports, each time I try to view the page I get a message box with a error as : "Unable to locate control SSRS 2005: oReportCell" the same error is displayed when i try to access my reports from "http://localhost/reports.....".
But the funny thing is I'm able to view the reports when I use the following URL: "http://localhost/reportserver/pages/reportviewer.aspx?/<report>". I have applied all the Hotfixes & installed the latest Service packs. Any suggestions ???????
View 1 Replies
View Related
Sep 17, 2015
Here are some details:
Domain = dm
Windows User = dmTestUser, member of sysadmin on SQLFL and SQLNY
SQL Server 2012 = SQLFL
SQL Server 2012 = SQLNY
Table = Product (exists in SQLNY and SQLFL)
SP = spGetProduct() (resides on SQLFL)
SQL Login = dbuser (on SQLNY, member of dbo on Product table)
I created a linked server on SQLFL pointing to SQLNY. The local server login to remote login mapping is as follows:
Local Login = dmTestUser
Remote Login = dbuser
with "Be made without security context" option selected. Run spGetProduct() to get Product records from SQLNY and populate Product table on SQLFL via the linked server.Here are tests I did:I connected to SQLFL using dmTestUser in SSMS. I manually executed the stored procedure spGetProduct() without any issues. Procedure gets Product records from SQLNY and populates the Product table on SQLFL. Everything is good.
I created a SQL Agent job called "Get NY Product" on SQLFL to execute spGetProduct(). I invoked this agent job and it executed successfully.However no data was loaded to the Product table on SQLFL. My stored procedure caught this error: Cannot initialize the data source object of OLE DB provider "SQLNCLI11" for linked server "SQLNY".
1. When sql agent job runs, which account does it use? Is the SQL Server Service or SQL Agent?I believe it's the sql agent.
2. What do I need to do to make this work?
View 4 Replies
View Related
Jun 9, 2015
We are unable to connect with Client SQL database server using VPN connection, even we are able connect with their intranet site.
We tried to connect using IP address, but no success. After that tried to ping that server with server name and IP address using command prompt, but got request time out error.
View 5 Replies
View Related
May 14, 2008
Hi folks,
I have created an EndPoint in SQL Server 2005 as per the code below.
CREATE ENDPOINT OSTC_LMS_Endpoint
AUTHORIZATION LMSEndPointUsers
STATE = STARTED
AS HTTP(
PATH = '/ostc_sql_endpoint',
AUTHENTICATION = (BASIC),
PORTS = (SSL),
SITE = 'OSTC-DEV-001'
)
FOR SOAP (
WEBMETHOD 'ostc_SQLSoapTester'
(name='OSTC_LMS_06.dbo.ostc_SQLSoapTester',
FORMAT = ROWSETS_ONLY,
SCHEMA=STANDARD),
WSDL = DEFAULT,
LOGIN_TYPE = MIXED,
SCHEMA = STANDARD,
DATABASE = 'OSTC_LMS_06',
NAMESPACE = 'http://tempUri.org/'
)
GO
USE master
GRANT CONNECT ON ENDPOINT::OSTC_LMS_Endpoint
TO [LMSEndPointUsers]
GO
USE master
GRANT CONNECT ON ENDPOINT::OSTC_LMS_Endpoint
TO [ostc-dev-001endPointUsers]
GO
-----------------------------------------------------------------------------------------------------------------
The SPROC being exposed as the webmethod: -
USE OSTC_LMS_06
IF EXISTS (SELECT name FROM sysobjects
WHERE name = 'ostc_SQLSoapTester' AND type = 'P')
DROP PROCEDURE ostc_SQLSoapTester
GO
CREATE PROCEDURE ostc_SQLSoapTester
@UsersId char(12)
AS
SET NOCOUNT ON
SELECT FIRST_NAME,FAMILY_NAME
FROM USERS
WHERE USERS_ID = @UsersId
GO
USE OSTC_LMS_06
GRANT EXECUTE ON ostc_SQLSoapTester
TO LMSEndPointUsers
GO
USE OSTC_LMS_06
GRANT EXECUTE ON ostc_SQLSoapTester
TO [ostc-dev-001endPointUsers]
GO
----------------------------------------------------------------------------------------------------------------
The computer in question is our dev server and is running as a workgroup machine with the following: -
Win Server 2003
SQL Server 2005
.net Framework 2.0
No firewalls or Proxies are in the way.
The computer has to be as a workgroup machine to reflect our live server.
The user LMSEndPointUsers is a SQL Server Login
The user ostc-dev-001endPointUsers is a machine login
We have employed the Security class as per the information given in the SQL Server documentation with the intention of using the WS-Security headers that apparently are to be used when trying to authenticate using a SQL Server login.
----------------------------------------------------------------------------------------------------------------
Code used to connect and try and reciev the dataset.
string sUserName = "userName";
string sPassword = "Password";
LMS_Endpoint.OSTC_LMS_Endpoint wsSQLTester = new LMS_Endpoint.OSTC_LMS_Endpoint();
SqlSoapHeader.Security sqlSec = new SqlSoapHeader.Security();
sqlSec.Username = sUserName;
sqlSec.Password = sPassword;
XmlWriter writer = XmlWriter.Create("Security.xml");
writer.WriteStartElement("security");
sqlSec.WriteXml(writer);
wsSQLTester.sqlSecurity = sqlSec;
DataSet dsMySet = wsSQLTester.ostc_SQLSoapTester("RH6915145507");
Basically authorization is denied 401.
Hope someone can help here as have tearing my hair out.
Thanks in advance
View 2 Replies
View Related
Dec 14, 1999
How can I get my hands on the Microsoft SQL Server resource kit?
In particular, I need the "Load Simulator" application.
Any information would be greatly appreciated.
Jim
View 1 Replies
View Related
Feb 8, 2004
Hi
Im considering several options as to where to place the SQL Server and the web server in our organization's network I would like to hear your insights about the subject and the following options:
Option 1:
Placing the SQL Server inside the domain while the web servers are outside in the DMZ
Pros: SQL Server is in the domain, its harder to hack and its easier to manage inside the domain
Cons:the DMZ must allow access inside the domain so that the web servers can access the SQL Server this is not very secure.
Option 2:
Placing both SQL Server and the web servers in the DMZ
Pros: Fast access from web servers to the SQL Server. no traffic is allowed from the DMZ into the domain so the domain is completely secured.
Cons: The SQL Server is not very secured, its harder to administer it outside the domain.
I would love to hear of more options suggestions
thanks.
View 1 Replies
View Related
Jul 22, 2015
One of our databases has at some point in its dark past had the owner of the guest schema changed to be a named user, rather than the default guest user. Correcting this feels like it would be easy enough by running the following...
ALTER AUTHORIZATION ON SCHEMA::guest TO guest
but that results in..
Msg 15150, Level 16, State 2, Line 3
Cannot alter the schema 'guest'.
I realise the guest schema is a special one, and cannot be dropped, but I'm not trying to do that. End goal is to export the database to a SQL Azure DB, and this guest schema assignment is blocking that process from completing.
View 4 Replies
View Related
Jun 18, 2015
SQL SERVER 2008R2
The number of files to retain for SQL Server Logs is set to 99. When I expand the SQL Server Logs node in SQL Server Mgt Studio it shows the current log file through Archive#49. The oldest archive file is dated 2015/05/26. If I select that archive in SQL Server Mgt Studio it shows me the details and entries of that archive file. Yet when I go to the directory on SQL Server for the log files there are only the 5 most recent files. I have searched for '.trc' files on the entire drive and have found no other files.
How can SQL Server Mgt Studio show archive files that have no corresponding archive file in the directory that is supposed to contain the log files?
View 1 Replies
View Related
Jun 16, 2007
I have a login that is mapped to a Windows sysadmin account. I used it to login to Sql Server 2005. I then created a database called Freedom. I then added a Windows login and user called FreedomAdmin, with Freedom set as the default database. When I login in to Windows using FreedomAdmin and then try to login in to Sql Server 2005, I get the following error:
The server principal "FREEDOM1FreedomAdmin" is unable to access the database "master" under the current security context.
If the default database for FreedomAdmin is Freedom (and it is - I checked from my sysadmin login account), why can't I login. Must I give FreedomAdmin permissions to master?
View 6 Replies
View Related
Nov 19, 2015
We are unable to login in database due to “The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x80090331. Check certificates to make sure they are valid. Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.”we have tried to run that selfssl.exe from command prompt followed by below command and am getting the cryptographic error.
View 3 Replies
View Related
Jan 31, 2008
All,
Been serahcing frantically for this provider: "Microsoft OLE DB Provider for ODBC Drivers" for Windows Server 2003 x86. However I can't seem to find it. Supposedly MDAC 2.8 has it but when I go to install MDAC 2.8, nothing happens (this is acknowledged in fact in the support area on Microsoft and the given reason is that Win2K3 Server is already MDAC 2.8-compliant. So no new stuff needs to be installed. But alas this provider isn't in my list of available drivers).
Attempts to install any part of a lesser version of MDAC that says it has it are met with "Can't do that 'cause your current version of MDAC is higher that that."
I have been searching around all day on Msoft and other sites for such a beastie but like Brigadoon vanishing in the mist, it eludes me. Msoft's main MDAC page is here:
http://msdn2.microsoft.com/en-us/data/aa937729.aspx
We need to use this kind of driver apparently with a certain Crystal Reports report or else it just won't run.
Thanks in advance for any advice/insights/DL links that work, etc...
Matt
View 3 Replies
View Related
Aug 30, 2014
I get this error when I open powerpivot documents in sharepoint.
"We cannot locate a server to load the workvbook Data Model."
after I've looked into the logs I came up with this:
Check Server Version (SQLSERVER2012POWERPIVOT): Fail (Expected: >=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (SQLSERVER2012POWERPIVOT): Pass.
MonitorableCheck Server Configuration (SQLSERVER2012POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server SQLSERVER2012POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server SQLSERVER2012POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion). at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
how can I update my analysis server version that doesn't affect anything else?
should I install a CU on my SQL or upgrade it?
View 4 Replies
View Related
Apr 23, 2015
I have an very long ntext field, made up of many sentences that I append a full stop to every one, I also strip out any line breaks within the text. However I get this error, when I look it up it comes up with "Failed to locate the ending boundary of a sentence."
View 0 Replies
View Related
Dec 3, 2007
Hi all,
In the last one and half years, I used the Northwind Database in SQL Server Management Studio Express (SSMSE) to learn the programming of SqlConnections, Data sources, Database Exploere, ADO.NET 2.0, etc. via VB 2005 Express.
The Northwind Database in my SSMSE got lost very often, but I was not aware of it. How can I know where the Northwind Database is used or processed by my VB 2005 Express projects that were the examples of some tutorial books or my trial projects? How can I release the Northwind Database back to my SSMSE from the VB 2005 Express projects? Please help and advise.
Thanks in advance,
Scott Chang
View 2 Replies
View Related
Aug 21, 2014
I have just loaded some tables to our main db.there is a col in one table called MAPCONCEPTID.I want to know how to find where MAPCONCEPTID field in one of the table is mapped to.
View 3 Replies
View Related
Nov 13, 2007
Hi,
Can someone help me, I installed SQL 2005 Enterpirse Editon on windows clustered servers. Then after the installation
I want to change the path of my DB logs but the problem was, I can not see the other drives. I can see only the drive where the DB was located. Is there any special configurations that should be done.
Thanks.
Russell
View 1 Replies
View Related
Feb 7, 2004
Hey there, could someone please help me!!
I had created a database in sql server but since then installed windows xp pro and now when i go through the microsoft sql server dsn configuration the database is not valid and therefore i cannot change the default database as it says it doesn't exist.
So then when i type in command prompt use 'db' it says it doesn't exist but when i try to create 'db' it says that the database already exists.
I get the error message, could not locate entry in sysdatabases for 'cti' (database name).
When i look in mysql - data - along with master etc there is my cti.mdf and log files??
I'm stuck???
Is it that the files just aren't registering through sql server???
Please help!
View 2 Replies
View Related
Sep 22, 2014
Is there a query that I can run in SQL to find all the table names? I have a certain table I am trying to locate.
View 1 Replies
View Related
Sep 18, 2005
I have created a new filegroup,and i want to add existing table to the file group.
I don't have the appropriate syntax for this.
Please Help.
Regards Mr. Mumin
Thanks All,
View 1 Replies
View Related
Aug 2, 2006
I have a sql table containing names of departments. Is there a way after a user has typed a department in a textbox on a web page I can search for it in the sql table and if it isn't there then add it. I am using asp.net for the web page.
View 3 Replies
View Related
Sep 1, 2006
when we get something like this in QA:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near ','.
I only have 3 lines inclusing only one insert. How do I know what value or keyword is wrong from the error message above.
Thanks
View 4 Replies
View Related
Feb 5, 2008
Hi,
I am trying to locate my SSRS log files to troubleshoot some report problems.
I run Microsoft Visual Studio when designing reports using Report Designer, from a local installation of MSSQL Developer Edition on my notebook. The data source I work on is on a remote SQL Server.
I expect to find the SSRS Log Files on my local installation but I am having trouble locating it.
Please help.
Thanks in advance.
regards,
Kenny
View 14 Replies
View Related
Oct 15, 2007
Part of our product will be using several SSIS packages. One of our installers wants to be able to create a .cmd file that will run DTEXEC against one of the packages, with the correct config file specified. It had been assuming that SQL Server was installed in the Program Files special directory, but that's not always the case.
What is the correct way to locate the installation of SSIS? In fact:
What is the correct way to determine whether SSIS is installed?
What is the correct way to determine the version and SP that is installed (I want to require SP2)
I had been using the values under HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90DTSSetup until I found an SP2 machine with SSIS installed which did not have these keys. Where's the right place to look?
View 6 Replies
View Related
Dec 8, 2004
Hi All,
looking for some views about where to place these catalogs. The manual says they work more effiecntly on a different drive to the database, which is understandable.
I'm in the processes of designing a new database application which is to be avaiable via the internet, and extranet app. But as I'm planning to host the app and the main database on a shared server but to have the catalogs on another server held in house. The app will have search facilities as its main use. They will obviously be some performace issues, but is this a good idea?
Thanks for any comments..
Regards
Davej
View 1 Replies
View Related
Sep 18, 2001
How to locate last occurrence of character in string?
View 1 Replies
View Related
Mar 8, 2005
Hi Folks,
Getting the following error after a DBCC CHECKDB
Server: Msg 8906, Level 16, State 1, Line 1
Page (3:15010) in database ID 9 is allocated in the SGAM (3:3) and PFS (3:8088), but was not allocated in any IAM. PFS flags 'MIXED_EXT ALLOCATED 0_PCT_FULL'.
Trying to located the object that the allocation has gone to pot over.
Any quick way to resolve a datbase object using a page ID?
Thank In Advance
View 2 Replies
View Related
Dec 20, 2013
I am using SQL 2005 and I'm trying to find a T-SQL command that will allow me to retrieve a sub string based on the token. For instance, if I had a string like this:
abc^defgh^ij^klmnop^qrs
Let assume the token is the ^ and I want to get the string at the third token klmnop.
is there a simple one line command that I can use to retrieve this data?
View 3 Replies
View Related
Oct 15, 2006
Hi, as the subject suggest.
Thanks in advance
View 5 Replies
View Related
Feb 21, 2008
Hi
According to BOL, dbcreator should able to create, restore, backup, and etc.
But when i tried to restore with dbcreator's server role, it displayed this error message
TITLE: Locate Backup File - XXXX
------------------------------
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup
Cannot access the specified path or file on the server. Verify that you have the necessary security privileges and that the path or file exists.
If you know that the service account can access a specific file, type in the full path for the file in the File Name control in the Locate dialog box.
May I know what i had missed out?
Thanks In advance
View 8 Replies
View Related
