I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice
Thanks,
When i started the service, i am getting the following message Starting up database 'master'. Error: 9003, Severity: 20, State: 1. Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed i don't have any backups for master database is there any way i can restore it from .mdf, .ldf files..
I was facing problems applying SP3 for Analysis Services so I removed it and then re-installed.
I then tried to apply SP3 but I am still getting v8.00.382 for AS (which represents SP1). I have tried a couple of things but it seems that SP3 is just not getting applied (for Analysis Services).
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182 TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
This one has really stumped me! I set up HTTP to connect to an Analysis Services cube within an ASP .NEt application. On inititial setup it worked well and I was able to connect and view the data in my ASP application.
However, for NO reason that I can see it is now coming up with the following error:
Either a connection cannot be made to the localhost server, or Analysis Services is not running on the computer specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Either a connection cannot be made to the localhost server, or Analysis Services is not running on the computer specified.
I have tried everything I can think of to fix it but can't get it to work. I have even gone through the technet document titled "Resolving Common Connectivity Issues in SQL Server 2005 Analysis Services Connectivity Scenarios" but it hasn't helped.
I am using SQL Server (Analysis Services) 2005 and ASP .NET 2.0. The application is developed in VS 2005.
I have Vista x64 and I had been fighting SQL Server for a few days and yesterday I decided for reinstallation. Unfortunately now I am not able to instal the server back!
Each time I got the following error (it refers to SQL Server service):
Code Snippet <Func Name='LaunchFunction'> Function=Do_sqlShutDownRANUInstance <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='203'> Doing Action: Do_sqlShutDownRANUInstance PerfTime Start: Do_sqlShutDownRANUInstance : Tue Sep 04 23:32:16 2007 <Func Name='Do_sqlShutDownRANUInstance'> Service SQLEXPRESS with parameters '' is being started at Tue Sep 04 23:32:16 2007 Unable to start service (3) Error Code: 0x80070003 (3) Windows Error Text: System nie może odnaleźć określonej ścieżki. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls::Service::Start Source Line Number: 316
Setting status of unmanaged components and removing unmanaged resources
Error Code: 3 MSI (s) (F4:E4) [23:32:24:490]: I/O on thread 3716 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 788 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 2948 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 4392 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:493]: I/O on thread 5048 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4464 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4992 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:495]: I/O on thread 4768 could not be cancelled. Error: 1168 MSI (s) (F4:E4) [23:32:24:497]: I/O on thread 3004 could not be cancelled. Error: 1168 MSI (s) (F4!4C) [23:32:24:497]: Product: Microsoft SQL Server 2005 -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) System nie może odnaleźć określonej ścieżki. . Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (3) System nie może odnaleźć określonej ścieżki. . <Failure Type='Fatal' Error='3'> <EndFunc Name='LaunchFunction' Return='3' GetLastError='203'> MSI (s) (F4:80) [23:32:24:507]: User policy value 'DisableRollback' is 0 MSI (s) (F4:80) [23:32:24:507]: Machine policy value 'DisableRollback' is 0 Action ended 23:32:24: InstallFinalize. Return value 3. MSI (s) (F4:80) [23:32:24:512]: Executing op: Header(Signature=1397708873,Version=400,Timestamp=925154312,LangId=1033,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1) MSI (s) (F4:80) [23:32:24:512]: Executing op: DialogInfo(Type=0,Argument=1033) MSI (s) (F4:80) [23:32:24:513]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005) MSI (s) (F4:80) [23:32:24:514]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1]) MSI (s) (F4:80) [23:32:24:516]: Executing op: ActionStart(Name=Do_sqlShutDownRANUInstance.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Running action to shutdown instance(Run As Normal User),) MSI (s) (F4:80) [23:32:24:517]: Executing op: ProductInfo(ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},ProductName=Microsoft SQL Server 2005,PackageName=sqlrun_sql.msi,Language=1033,Version=151129058,Assignment=1,ObsoleteArg=0,ProductIcon=ARPIcon.ico,PackageMediaPath=Setup,PackageCode={08AD0897-0300-4F7D-A3CC-A0CCEDD42E0D},,,InstanceType=1,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3) MSI (s) (F4:80) [23:32:24:518]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,) MSI (s) (F4:80) [23:32:24:519]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWAREMicrosoftWindowsCurrentVersionSharedDLLs,,BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D258-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,) MSI (s) (F4:80) [23:32:24:520]: Executing op: ComponentUnregister(ComponentId={68C6D257-77E0-11D5-8528-00C04F68155C},ProductKey={C3F5DBA5-ABFC-443E-AA60-928223AADF53},BinaryType=0,)
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
I am connecting to SSAS cube from Excel and I have date dimension with 4 fields (I have others but I don't use it for this case). I created 4 fields in order to test all possible scenarios that I could think of:
DateKey: - Type: System.Integer - Value: yyyyMMdd Date: - Type: System.DateTime DateStr0: - Type: System.String - Value: dd/MM/yyyy (note: I am not using US culture) - Example: 01/11/2015 DateStr1: - Type: System.String - Value: %d/%M/yyyy (note: I am not using US culture) - Example: 1/11/2015
Filtering on date is working fine:
Initially, in excel, filtering on date was not working. But after changing dimensional type to time, and setting DataType to Date, as mentioned in [URL] filter is working fine as you can see in the picture.Grouping on date is not working:
I have hierarchy in my Date dimension and I can group based on hierarchy, no problem. But user is used to pre-build grouping function of excel, and he wants to use that. Pre-build functions of Excel, Group and ungroup seems to be available as you can see in following picture:
But when user clicks 'Group', excel groups it as if it is a string, and that is the problem. User wants to group using pre-build grouping function available in Pivot table. I also find out that Power Pivot Table does not support this excel grouping functionality. And if I understood well, this pre-build grouping functionality of excel, needs to do calculation at run time, and that is not viable solution if you have millions of rows. So Power pivot table does not support pre-build grouping functionality of excel and hence we need to use dimension hierarchy to do the grouping. But I am not using Power Pivot table, I am using simple Pivot Table. So I expect grouping functionality to be working fine. Then I tried to do simple test. I created a simple data source in excel itself. And use it as source of my Pivot table. Then grouping is working fine. The only difference that I can see is (When double click the Measure value in Excel),For date values of my simple test, excel consider them as 'Date'.
For date values of my data coming from cube, excel consider them as 'General'
2.1. But value here is same as it was in simple test.
2.2. 'Date Filter' works just fine.
2.3. If I just select this cell and unselect it, then excel change type to 'Date' though for that cell.
2.4. I have created 4 different types of fields in my date dimension thinking that values of attribute of my dimension might be the problem, but excel consider 'General' for all of them.
2.5 This value (that can be seen when double clicking on measure) comes from 'Name Column' of the attribute. And the DataType defined is WChar. And I thought that might be the reason of issue. And I changed it to 'Date'. But SSAS does not allow it to change to 'Date' giving error : The 'Date' data type is not allowed for the 'NameColumn' property; 'WChar' should be used.
So, I don't know, what is the puzzle piece that I am missing.
1. Date filter works, group does not work
2. Excel consider it as 'General' string.
3. SSAS does not allow to change 'NameColumn' to Date.
I would like to know the best practice for running analysis service in terms of port usage. Is it better to run on a specific port or have dynamic ports ? We have clustered servers that run default on 2383 but not sure with non clustered what's the best way to get performance.
We seem to be being plagued by the error below by our SQL Server agent. This happens almost everytime we restart the server that has been running for a day or two.
Our SQL Server Agent uses a none expiring domain credential. I understand that this problem only happens when the profile being used by the SQL Servr Agent has changed (password change). What puzzles me is that the login is A ok and no changes has been made to it's password.
We always resolve this problem by changing the login used in the SQL Server Agent to local and after that, returning it back to it's original domain login. Unfortunately, we cant always do this everytime something goes wrong.
Can anyone please help us shed a light on this? We're using SQL2k with SP3a. Thanks!
Error:
An error 1069 - )The service did not start due to logon failure) occurred while performing this service operation on the SQLServerAgent service.
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
I cannot run the sql server 2005 analysis services from my configuration manager. I noticed this today for the first time but I don't think I changed something special since last week.
I found the log file in C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPLog but I can't post it here since it's too long and I found this :
Message: Erreur OLE DB : Erreur OLE DB ou ODBC . (Source: \?C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPLogmsmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210003)
This repeats many times in the middle of the file but there is no date on it so I can't say if it helps.
If this isn't the good one, please can you tell me where to find the log that can help resolve the problem.
I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error
"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."
The event log shows the following errors:
1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
I tried enabling remote connections but still got the same error.
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
Why I am not able to start the Analysis Services Engine again as the error message from event viewer as:
Event Type: Error Event Source: MSSQLServerOLAPService Event Category: (289) Event ID: 0 Date: 04/07/2007 Time: 10:45:48 User: N/A Computer: computer_name Description: The service cannot be started: Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. Message-handling subsystem: The message manager for the default locale cannot be found. The locale will be changed to US English. The following system error occurred: The filename, directory name, or volume label syntax is incorrect. . File system error: Error occurred during the creation of directory: '\?'.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
On SQL Server, when I start the Analysis services, the error message is : The SQL Server Analysis Services (MSSQLSERVER) service on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and Alerts service.
Why is that? That is really frustrated and please any of you give me any advices or help on it. Thanks a lot in advance.
I need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening? Any help with this problem would be appreciated. Thanks
I get this error message each time i try to run the vb application in visual studio .net environment. -------------------------------------------------------------------------------- "Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine" -------------------------------------------------------------------------------
I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by
------------------------------------------------------------------------------- Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004 ------------------------------------------------------------------------------
I am running MS SQL Server 2000 on windows 2000 adv server.
what can be done to remove this error. Thaks in advance
As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as
"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
and went down hill rapidly to the point now where I can't even start it up. Here's the error log:
2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation. 2007-07-21 22:51:07.55 Server All rights reserved. 2007-07-21 22:51:07.55 Server Server process ID is 2656. 2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY. 2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required. 2007-07-21 22:51:07.66 Server Registry startup parameters: 2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required. 2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server. 2007-07-21 22:51:08.04 spid5s Starting up database 'master'. 2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa". 2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'. 2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-07-21 22:51:09.51 spid8s Starting up database 'model'. 2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required. 2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'. 2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1. 2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3. 2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-----------
I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?
Recently we rebuilt one of the cluster node (due to some issues with SP), where distribution agent resource or instance was running after rebuilding that node, we failed over distribution resource to that (newly built) node and after that log reader agent jobs were in suspended status. After checking the job history, we got the below error "Unable to start execution of step 2 (reason: The LogReader subsystem failed to load [see the file for details]; The job has been suspended). The step failed."After getting lot of search did not get exact solution which matches to the environment
I have noticed that analysis services has stopped on two instance on my server.For the first instance, I go to configuration manager and try to start the service I get the standard service did not respond in a timely fashion error, if I change the account that runs it from the domain user account to local system it starts up fine, but try changing it back I get the following WMI error: The server threw an exception. [0x80010105], I see this error in google but it always refers to the agent and not analysis services. In the application log, I see the following error...The service cannot be started: Message-Handling subsystem: The message manager for the defaul locale cannot be found. The locale will be changed to US English. File system error: The following error occurred during a file operation: Access is denied. But access denited to what? The services had been up and running for a while and nothing on the server has changed.
As on the second instance gives me the following error in the application log...The file <path>CryptKey.bin' could nor be opened. Please check the file for permissions or see if other applications locked it.
Then further up...The service cannot be started: Message-Handling subsystem: The message manager for the defaul locale cannot be found. The locale will be changed to US English. File system error: The following error occurred while opening the file <path>CryptKey.bin.
I should say the <path> part is me, saving typing not part of the error. And again, if I change the account running the service to local system if all changes and starts fine, but if I try to change it back I get WMI Error: The process terminated unexpectedly [0x8007042b]. If I hit 'apply' a second time I get another WMI Error, except this time it says 'The server threw an exception. [0x80010105].
I have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.
The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).
However, the SQL services are not starting up and I am seeing the following errors in the errorlog.
===================
2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.
2007-07-25 12:36:55.90 spid13s Starting up database 'model'.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.
2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
====================================
I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?
