I get this error message each time i try to run the vb application in visual studio .net environment.
--------------------------------------------------------------------------------
"Unable to start SQL debug session. Ensure sqldbreg2.exe and proxy/stub DLL sqldbg.dll are registered on this machine"
-------------------------------------------------------------------------------
I am running visual studio and sql server 2000 on the same machine. I have given permission to sqldebugger user to access the system32 folder and sql debugging folder. This error message is followed by
-------------------------------------------------------------------------------
Attaching the T Sql debugger to process[proj1.exe] on machine 'my machine name' failed Error code 0x80004004
------------------------------------------------------------------------------
I am running MS SQL Server 2000 on windows 2000 adv server.
what can be done to remove this error. Thaks in advance
Hello! I created SQLServer account which suppose to launch MSSQLServer and SQL mail serveces. But when I try to stop and then run SQL Server through Command promt I see error message: " Starting SQL Mail session.... Error: 17903, Severity:18, state:1 MAPI login failure Error: 17951, Severity:18, state:1 Failed to start SQL MAil session" Please save my life. If you have any idea what I have to do to fix up problem let me know.
My custom data component is an error handler that processes data and then calls
ComponentMetaData.FireError in ProcessInput() to send the error data to the event handler per row. Everything works fine during debug/release mode. However when I run it using "Start without Debug" no errors are thrown. My event handler still catches stock component errors, so something must be wrong in this custom component. Am I suppose to set a property or something?
I have a project with 48 packages. When I press the green button for Start Debug, it seems like Integration Svcs. is re-loading or some type of validation occurs (screen flashes with each package being highlighted in solution manager) for all packages in the project before executing the specific package.
Also, If I close all the packages except one that is to be executed and press the green start debug button, all the packages are loaded before executing the specific package. There is always a delay before the actual package is executed when using the green start debug button.
If I right click on the specific package in solution manager and execute it, the package is executed immeadiately without any delay.
I did not have this issue until I tried to build and deploy the package.
I cannot understand why I cannot get my sql mail to work properly. It was working fine a couple of days ago. My mail profile is setup using Outlook. The only problem is that when I go to services and check the Mssqlserver & sqlserveragent, they are now logging in as the system account, but when I attempt to change them to the administrator account it says error 1057 occured: the account name is invalid or does not exist, yet it does. Anyone have any idea how to rectify this? this is what is on the error log:Error: 17919, Severity: 18, State: 1 2001-06-05 14:09:16.33 ods Invalid session.. 2001-06-05 14:09:16.34 ods Error: 17951, Severity: 18, State: 1 2001-06-05 14:09:16.34 ods Failed to start SQL Mail session..
Hey everyone. I've been using .NET and SQL server for almost 2 years. I know most of the ins-and-outs, but we hit a bug that requires us to use remote debugging to track down. Like most people, remote debugging does not work out-of-box, but, I've actually tried most of the tips and I still cannot get it to work. Here is a summary of my problem:
------------------------------
Trying to remote debug a SQL Server 2005 database on a workgroup. I am not using CLR, just plain T-SQL.
In Visual Studio, I use the Server Explorer with a data-connection pointed to my remote server and it uses Windows Authentication. It correctly enumerates the available databases. "Step into Procedure" shows the "Run Stored Procedure" dialog with the various input/output parameters. Continuing, I get a dialog that says
"T-SQL execution ended without debugging. You may not have sufficient permissions to debug."
SQL Server is run under Windows Server 2003's window account: 'sqlusr' Created user on local workstation called: 'sqlusr' The 'sqlusr' on remote server and local workstation have same password, and are in the Administrator groups 'SERVERNAMEsqlusr' is in SQL Server's bulkadmin, dbcreator, diskadmin, processadmin, securityadmin, serveradmin, setupadmin, and sysadmin roles Simply running Visual Studio 2005 Professional as my local user does not allow me to authenticate with SQL Server. Running: 'runas /userqlusr "devenv.exe"' will let me authenticate. So - user authentication is apparently working. I imagine that 'Remote Debugging Components' are installed, since msvsmon.exe is available on the server. RPC and RPC Locator are running on remote server and local machine There are no firewalls on the local workstation or remote server (Windows firewall is totally disabled, no 3rd parties..) Debugging a local SQLEXPRESS database on my workstation works. 'SERVERNAMEsqlusr' has full control over the debugging folder: 'C:Program FilesCommon FilesMicrosoft SharedSQL Debugging' I haven't seen any errors in the remote server's 'Event Viewer/Application' list The Stored Proc name I am executing does not contain any single or double quotation marks SQL Server and Windows Server both share the same name 'SERVERNAME' Edited DCOM Access Limits and Launch Limits in both the workstation and local server. Allowed 'Remote Access' for Everyone Any help? I'm out of ideas. Thanks in advance!
Before I start peppering this forum with questions I'll start with one that might help me figure out others...
I'm trying to debug a custom component I'm developing. All the texts I've read state that the first thing I should do is attach to the devenv.exe process. When I choose this, the window that lists the available processes I can attach to does not contain devenv.exe.
Is this a security issue? Any other ideas? I'm an administrator on the box. Most of my career's been spent in UNIX environments, so perhaps I'm missing something basic I'm unaware of.
The client was unable to reuse a session with SPID 94, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
SPID varies.
Anybody that knows anything why this error occurs?
I have written Custom delivery extension, I am trying to debug this by attching the process ReportingServicesService.exe , I am getting error "Unable to Attach to the Process.Access is denied". I am Admin on my sytem, ASP.net is also part of admin and debuggers group. I am using Visual studio 2005, reporting services 2005, ReportingServicesService.exe is also under my login
We are running SQL2K5 and have a Web server with a family of sites all sharing an identical connection string to enable ADO connection pooling between them. Today for about 20 minutes we had several (all?) connections from one site that uses a specific DB get a connection reuse error which showed in out SQL logs:
DESCRIPTION: The client was unable to reuse a session with SPID #, which had been reset for conection pooling. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this error message.
We also have SQL Server slowdown and log in problems from other applications that seemed a symptom of this, or some third unknown cause. Note, the # means the run-time spid number was inserted. The misspelling "conection" comes right out of sys.messages (it is not our custom error):
select top 10 * from sys.messages where message_id = 18056
The immediately preceeding error in the SQL Log was always: Message Error: 18056, Severity: 20, State: 29.
Where Severity and State vary, but "Error: 18056" is consistent, although I can find no documentation on "Error: 18056" through Google or MSDN.
Also, the "The client was unable to reuse a session ..." error seems not to be referred to anywhere.
In our IIS logs, the matching entries are of the form:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
and
Invalid connection string attribute
My questions: Does anyone have experience with this error? We have real good history with ADO connection pooling, but can a "bad" connection be pooled, and if so can it be "flushed" or the pool "drained"?
I have downloaded and installed the trial version of MS Visual Studio 2005 Team System. The installation was successful. However, I am not able to start SQLEXPRESS using the SQL Server Configuration Manager. It shows me SQLEXPRESS but when I right click and select Start it tries to start the service and after some time gives the following error
"The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details."
The event log shows the following errors:
1. FCB::Open: Operating system error 5(Access is denied.) occurred while creating or opening file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2. FCB::Open failed: Could not open file c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf for file number 2. OS error: 5(Access is denied.).
I tried enabling remote connections but still got the same error.
My Server service will not start, i get a message saing consult the logs, in the error logs it says error in the model db .ldf file. However, i can not connect to the server to restore from my back ups. I get the error msg, your server may not be configured to accept remote connection. No, i dont know what im doing and my only though is to start from scratch reinstalling the server. Any help is apreciated.
I'm having some problems debugging SQL Server stored procedures on a SQL Server 2005 server. I have installed Visual Studio 2005 on a workstation running Windows XP, now I'm trying to debug a ASP.Net web application that has some code that executes the stored procedures on a Windows 2003 Server running SQL Server 2005.
I opened VS2005 ... created a connection to the SQL Server 2005 instance ... open the Stored procedure ... right click the stored procedure name and selected Step into Stored Procedure and the following message is displayed:
Unable to start T-SQL debugging.Could not attach to SQL Server process on 'ServerName'.
I need to start SQL Server Agent so that I can run scheduled jobs. I am running SQL Server 7.0 with windows NT 4.0 service pack 4. When I try to start the agent I get the following error
Error 22003: StartService() returned error 5,'Access is denied'
Does anyone have an idea as to why this is happening? Any help with this problem would be appreciated. Thanks
I have installed MS analysis service(OLAP) on my lap top
my user is in the Administrative group , other than that I tried creating a user with 'OLAP ADMINISTRATOR' privilate and tried to start the ms analysis service
I am getting the error , unable to start the service on server(), you are not a member of OLAP Administrators group
I tried to install the service pack 3 from Microsoft
Could you pleae guide me to start this serivice Thanks,
As my sql agent is not starting due to XP's are disabled . when I ran the sp_configure with override and changed to 0 to 1 when I am starting the agent the configured value will be back to again 0 and in logs.Waiting for SQL Server to recover database 'msdb'...ODBC Error: 0, Invalid character value for cast specification [SQLSTATE 22018]
When i started the service, i am getting the following message Starting up database 'master'. Error: 9003, Severity: 20, State: 1. Cannot recover the master database. Exiting.
i tried starting using -f -m paramters,but could not succeed i don't have any backups for master database is there any way i can restore it from .mdf, .ldf files..
I have a client server application and it is running in the following configuration: SERVER A: MS Server2003 with MS SQL2000, Our ERP application software is installed on this server as is MS SQL200.
Server B: is our e-commerce server and it is running MS Windows2000 server OS and no MS SQL. The e-commerce application is pointed to the active SQL server on server A. I am trying to run a software version upgrade on on software application (which was successfully run on server A) When we try to run this upgrade on server B we get a message: " Setup is unable to start MS SQL Server Services, please start and try again"
I do not understand what is going on with this. SQL & SQL Service Agent is running on Server A. Any suggestions as to what I need to do?
I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as
"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
and went down hill rapidly to the point now where I can't even start it up. Here's the error log:
2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation. 2007-07-21 22:51:07.55 Server All rights reserved. 2007-07-21 22:51:07.55 Server Server process ID is 2656. 2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY. 2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required. 2007-07-21 22:51:07.66 Server Registry startup parameters: 2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required. 2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server. 2007-07-21 22:51:08.04 spid5s Starting up database 'master'. 2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa". 2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'. 2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-07-21 22:51:09.51 spid8s Starting up database 'model'. 2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required. 2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'. 2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1. 2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3. 2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-----------
I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?
Recently we rebuilt one of the cluster node (due to some issues with SP), where distribution agent resource or instance was running after rebuilding that node, we failed over distribution resource to that (newly built) node and after that log reader agent jobs were in suspended status. After checking the job history, we got the below error "Unable to start execution of step 2 (reason: The LogReader subsystem failed to load [see the  file for details]; The job has been suspended).  The step failed."After getting lot of search did not get exact solution which matches to the environment
I have a SQL 2k5 ent. 64 bit on Windows 2003 Ent x64 edition.
The sql server was running fine under localsystem account. Recently I changed the service account to a local user (part of users group in windows) and implemented permissions according to KB article 283811. (have imlpemented the same on many other sql servers without issue).
However, the SQL services are not starting up and I am seeing the following errors in the errorlog.
===================
2007-07-25 12:36:55.90 spid11s Server name is 'HBCARPROD'. This is an informational message only. No user action is required.
2007-07-25 12:36:55.90 spid13s Starting up database 'model'.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x51.
2007-07-25 12:36:55.90 Server Error: 17182, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server TDSSNIClient initialization failed with error 0x5, status code 0x1.
2007-07-25 12:36:55.90 Server Error: 17826, Severity: 18, State: 3.
2007-07-25 12:36:55.90 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-07-25 12:36:55.90 Server Error: 17120, Severity: 16, State: 1.
2007-07-25 12:36:55.90 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
====================================
I have gone through the http://blogs.msdn.com/sql_protocols but everything mentioned here seems to be there. I understand this is some permission issue. Just not able to find it out. Can anybody help?
I thought I would post how I got remote t-sql debugging working in my environment. Hope it might help someone. I have two domains, DomainA and DomainB. DomainB has a one way external trust to DomainA. Dev Vista machine running VS 2005 is in DomainA logged in as user DomainAauser. SQL 2005 running on test Windows Server 2003 DC machine in DomainB under user DomainBuser. When trying to 'step into stored procedure' in VS, whether my data connection used windows authentication or sql server authentication, I would get the 'Unable to start T-SQL degbuggin...'. I could debug t-sql when I logged into the domain controller (console or rdp) and running VS on the server. I changed the SQL Server service to run under the DomainAauser account and I can now remote t-sql debug using both window authentication and sql server authentication. Hope this may help anyone that might run into this.
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows: One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29538 Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
Please help! I cannot debug CLR procs remotely. Whenever I try to start debugging in VS2005 I get the error: Unable to start T-SQL Debugging. Could not attach to SQL Server process on .... I have clr enabled set to 1 and I have Allow SQLCLR Debugging set on. But I continue to get this error. Any help would be greatly appreciated.
I have an ASP.NET project that uses a ASPNETDB.MDF file. This file is attached with a SQL Server Express everytime when I run the application, include debuging session. There are two debugging modes under Visual Studio 2005, through WebDev.WebServer or IIS. Both ways worked fine with this project until yesterday. Right now, whenever I try to debug it with WebDev.WebServer, it will show me an error: Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed. But if I debug it with IIS it works fine. Also, using the same machine and same installation of Visual Studio 2005 I can debug another project with WebDev.WebServer, that also uses a .mdf file (a different file). So, seems to me I jsut have problem with one mode and one project. The only thing that I did yesterday that I think may be relevant was that I reinstalled Visual Studio 2005 SP1 to fix another issue. Anyone has an idea? Thanks!
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
I am new to SQL Server 2005 Reporting Services and I€™m having problems starting the service. I am running a Windows XP SP2 with SQL Server 2005 and reporting services but the service will not start. My SQL Server instance logs on using €˜Windows Authentication€™ using a username sysadm with no password
I have installed IIS and made sure that ASP.net is running.
I have opened up the Report Services Configuration Manager and amended the settings but I€™m unable to get the service started!!!
Theses are my settings
i) Report Server Virtual Directory OK Name: ReportServer1 Website: Default Web Site
ii) Report Manager Virtual Directory Name: Reports1 Website: Default Web Site
iii) Windows Service Identity Service name: ReportServer Service Account: NT AuthorityLocal Service
Iv Web Service Identity (NOT WORKING)
v) Database Setup Servername €“ Nameofmyserver Database name - ReportServer1 Credential Type Server Credentials
When I click on start no error message appears, it just seems to time out.
