ms sql server
data:
idno Email Category
1 a@a.com c
2 b@b.com c
3 b@b.com c
4 b@b.com c
only unique email address record are requierd.
1 a@a.com c
2 b@b.com c
what could be the query for such requirements.
We have an identifier of who has performed an ection which populates a table with their email address in the format firstname.surname@domain. I am looknig for some code to split out the first name and surname (and, if possible, capitalise both) so uor audit report can show the actual name instead of the email address.
Has anyone encountered this issue previously and know a solution?
Many thanks in anticipation.
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
I'm trying to strip out the First & Last Name from an Email Address. The email address is formatted as "FirstName.LastName@emailaddress.com" but sometimes a middle initial is used (ex: "First.M.Last@emailaddress.com").
I can locate the '@' sign and the first '.' period(from left to right) but need to find the first '.' from the left of the '@' sign.
I'm doing this in a view.
Here's some sample data and what I've tried:
CREATE TABLE dbo.Table1
(EmailAddr VARCHAR(255))
INSERT INTO dbo.Table1 (EmailAddr)
SELECT 'Andy.Smith@gmaddr.com'
UNION ALL
SELECT 'Betty.Lee-Jones@gmaddr.com'
[Code] .....
Hello,
I will like to know the best practice for grouping email addresses in a table.
We have a basic table that has email address for admin users. Which goes thus
CLIENTS EMAIL
emailID int
username: varchar 20
Client_email varchar 150
The Above table is for our admin users. Enabling them to send out emails to clients. Based on their bills.
We have a second table for mass mailing. Which has emails in groups. Each group is based on the above entry. And groups could range from 5 users up to 100,000 users.
Whats the best way to implement this.
Do I create a seperate column for each email entry, knowing that this table would be extremely big, with a lot of repeated values, ie username etc. Or group them TOGETHER as varchar(max)
PLEASE ADVICE, best practices
thanks
Mary
Yes O !
There is a Table DISPLAY_DETAILS in which a Column - DISPLAY_NAME, which displays data in it as :
Joe Barnard(123456);Paul Johnson(114454); - Display as Name(Employee Id).
There is a EMployee Master Table EMP_MASTER Which contains Employee Id and Email Address Columns.
From this: Joe Barnard(123456);Paul Johnson(114454); I need to get the Email Address for these Employee Ids - 123456 and 114454
Hi,I have 2 fields in a database: 'email' and 'website'.In the majority of cases, the website field is not populated even though theemail address is. In 90% of cases, the website will be 'www.' followed bywhatever is after the '@' symbol in the email address.Would anyone be able to help me with the SQL that would take whatever isafter the '@' sign in the email address, add it to 'www.' and populate the'website' field?Thanks!
View 3 Replies View RelatedHi
do you know incase a script which extracts domain names from an email address?
like foreg. we have xyz@dmc.com or abce@dmc-int.com
should give
dmc and
dmc-int
i ve a filed named "Email" of datatype .i ve created this field to insert email address in this field.but when i insert an email address like "bilal@yahoo.com" from a textbox wh is in an ASP.net webpage then in the filed i see this "System.Web.UI.WebControls.TextBox".
can u plz tell me how to fix this
Regards
Ahmed Bilal Jan
Could this query be made more efficient?
It takes ages to run it. It strips of everything from an email address and keeps only the domain.
SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, CHARINDEX('.', SUBSTRING(Mailaddress, CHARINDEX('@', Mailaddress) + 1, 100)) - 1) AS mail_domain
this is what i am looking for,
A client with an email address that does not end in uk cannot make a room booking
Any ideas
(NOTE: FROM a NON-IT PERSON) We've implented SQL 2005 and Reporting Services, but our subscriptions only work internally: when we try to send reports via subscriptions to valid external email addresses, we get a message: invalid email address and the entire subscription does not work.. PLEASE ADVISE. IT WILL BE GREATLY APPRECIATED!
I would like to use ISS to extract the user name and email address out of the active directory. I would like to put it in an MS-SQL 2005 table that I can use stored procedures on. I am hoping I can use a query to do it but I understand there is a 1000 entry limit on the extraction of the Active Directory and I have more than 1000. Could someone point me in the right direction please. Thanks.
View 1 Replies View RelatedI just moved our SSRS server from one machine to another. It was sending our report emails from a service account. So when my end users get the emailed report it was from a service account (reports@blah.com) .
Now that I moved the DB to another server - the reports get emailed successfully - but they are being sent from my email address!
I have checked the rsreportserver config file. I also checked in the report server smtp setup and they both show the service account. I even checked the subscription owners and accounts.
SSRS is using my account, but I can't find where it's getting it from. Where else can I look?
how do I set up a SQL2000 server to send an alert to both an email address and a pager when a specific event occurs..please help!!! The server is in a different location and we need notification of problems!! thanks
View 1 Replies View Relatedi have a situation where is need to get email address from a varchar column. Here is some sample data for five records; The format can be change.
dummy text;
Tel: +44 (0)1234 566788;
Email: bbc@co.uk
Admissions dummy text;
T: +44 (0)1234 4444;
E: xyz@co.uk;
dummy text;
dummy text;
Tel: +123 32323 33;
Email: test@yahoo.com;
dummy text;
t: +88 (0) 115 333 5553;
f: +99 (0) 115 222 8888
e: dummy@gmail.com;
dummy text;
t: +11 (0) 222 222 2222;
e: myemail@test.com;
w:http://www.yahoo.com/faqs;
I am trying to retrieving all email address using particular domain extension for e.g. gmail.com
I wrote the below query
Select policyid,emailaddress from policyholder
WHERE policyholder.EmailAddress like '%gmail.com%'
It works fine, but i want to use the LIKE condition against ‘emailaddress’ column in email table as I have more than 100 domain extensions
I wrote something like
WHERE policyholder.EmailAddress like (select emailaddress from email) but I am getting the below error
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
Dear Mr Portas and Mr Sommarskog,Cause I am a newbie in sql, can I ask for your email address?My email Address is Join Bytes!ThanxBest RegardsMichael--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedHi,
The Browser role has the task Manage Individual Subscriptions. Fine, the user can create a subscription. The problem is that the reportserver populate the email address text box with the Windows User ID and does not let the user change this to put his email address instead. The text box is greyed out.
I found that to enable the text box I have to add the task Manage all subscriptions to the role "Browser".
This is a major security problem because with this setting any user can edit any subscription.
I suspect that I could work at the Active Directory level to populate a field that would in turn populate the email address with the correct data., however this is not an option for me. I have absolutely no way to do it or get it done. Does anybody has an idea on how I could allow a user to edit his email address in his subscriptions and not let him tamper with other users subscriptions?
Thanks
Philippe
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
I have subscription by email problem on the following configuration:
Windows XP prof.
SQL Server 2005 Enterprise
Configured Database Mail with remote SMTP server to send email successfully
Configured SSRS to use remote SMTP server
Edited the Rsreportserver.config file as following (by the instructions from MSDN)
<Configuration>
<RSEmailDPConfiguration>
<SMTPServer>smtp.broadband.rogers.com</SMTPServer>
<SMTPServerPort>25</SMTPServerPort>
<SMTPAccountName></SMTPAccountName>
<SMTPConnectionTimeout></SMTPConnectionTimeout>
<SMTPServerPickupDirectory></SMTPServerPickupDirectory>
<SMTPUseSSL></SMTPUseSSL>
<SendUsing>2</SendUsing>
<SMTPAuthenticate>0</SMTPAuthenticate>
<From>My email Address</From>
<EmbeddedRenderFormats>
<RenderingExtension>MHTML</RenderingExtension>
</EmbeddedRenderFormats>
<PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
<ExcludedRenderFormats>
<RenderingExtension>HTMLOWC</RenderingExtension>
<RenderingExtension>NULL</RenderingExtension>
<RenderingExtension>RGDI</RenderingExtension>
</ExcludedRenderFormats>
<SendEmailToUserAlias>True</SendEmailToUserAlias>
<DefaultHostName></DefaultHostName>
<PermittedHosts></PermittedHosts>
</RSEmailDPConfiguration>
</Configuration>
I scheduled my subscription and tested it. I didn't receive any mail from the setting email address, but got an error message in ReportServerService log file as following.
Error sending mail, CDO error -2147220978, will not resend
Error sending email. System.Runtime.InteropServices.COMException (0x8004020E): The server rejected the sender address. The server response was: 530 authentication required - for help go to http://help.yahoo.com/help/us/mail/pop/pop-11.html
I did a little search, but couldn't find any solution for it. Is anybody successfully to get the Reporting Services subscription by email function working through MS SQL Server Management Studio or if you have a solution for this issue, would you mind to share the experience with me. I will be very appreciated.
Hi
everybody.
I am new to VBA,.,, I Have created a folder under inbox in Outlook 2007 which stored the receipients information
like name, E-mail, which is not present in the address book of outlook.
I have imported this folder in access 2007. My problem is ... it does not display the email address.
Rest of the informations is displayed... Is there any way i could do this.??
is there any way i could get the email addresses to appear(import/get) in to the access table???
Is there any module i mite have to create??
Plz help...
thanks a million
I doubt this is possible, but can someone think of a way to change the email address used for sending report subscriptions based on the report or subscription?
It's a need that I've heard from a number of different clients. Scenario: a company has one reporting services server with reports running from numerous departments. Report subscriptions are sent to internal and external email addresses and there's a business need to use different "from" addresses based on the report (or audience).
I have records which are like below.
create table testedit
(
editid int
,Tguid varchar(20)
,ttime numeric(4,2)
,numApp int
,numOrg int
,custid varchar(1)
)
INSERT INTO testedit values(1,'ABC',12.52,40,11,'Z')
INSERT INTO testedit values(2,'ABC',12.52,500,33,'Z')
INSERT INTO testedit values(3,'ABC',12.53,500,33,'Z')
Out of this records I would like to select only the 1st and the 3rd record. ie. My result should only have the below rows
1,'ABC',12.52,40,11,'Z'
3,'ABC',12.53,500,33,'Z'
Any help?
Is there a way to get a Stored Procedure to return only unique records from a table? I am using a Stored PRocedure to query a table and it returns all the records in the table and there are many duplicates in the information. I am using SQL Server 2K.
View 12 Replies View RelatedI have the following sql:
SELECT COUNT(patient.patientID) AS total_patients
FROM patient
LEFT JOIN patient_record ON patient_record.patientID = patient.patientID
WHERE sub_categoryID = 4 OR patient_record.allocated = 4
from the database this gives me a COUNT of 22, it should only be 10. I am doing a join and it gives the total records in the two tables where I only want the total in the left table(patient).
How can I GROUP BY patient.patientID in a COUNT query
Thanx, Robson
is there a way to set up a scheduled sp to email me if no records are added to a certain table within the hour?
is this possible?
My SSIS tasks will have numerous inputs (flat files, Excel and Database tables). At the end of each task I want the task to send an email that lists the records that failed to load. I have looked at BOL and the forums and have not found what I am looking for. I am reluctant to create flat file outputs for each type of input due to the number of inputs. I am looking to have the error records as a string in a flat file or in an email. I am familiar with the CreateObject("Scripting.FileSystemObject"), createtextfile & writeline methods in VB. However, I am not sure how I would implement this. This is because the file creation would have to be done in a script task and the data rows loaded in a script component. If anyone can give me some suggestions, I would appreciate it.
Thanks in advance,
Lee
Hello Everyone and thanks for your help in advance. I have a SQL Server Table wtih approximately 100,000 records. I need to determine if there are duplicate records in this table. My probelm is that there is a unique ID column that was added for each row, so I'm not exactly sure how to filter the rows. Any help on this would be greatly appreciated. Thanks.
View 4 Replies View RelatedI'm trying to read from a table and return only the unique records from a table.
The table has 3 columns,
ID - Autoinc
Amount - decimal 6,2
Name - varchar(10)
If there are records like
ID Amount Name
1 0.03 Name1
2 0.07 Name9
3 0.05 Name3
4 0.03 Name8
5 0.07 Name4
6 0.06 Name7
I am wanting to retreive only records 3 & 6 (values 0.05
0.06) as they are the only ones where amount is unique i.e. only 1 entry in the table.
I put the following sql statement together which achieves this but it it only returns the amount value
select Count(amount),amount from bids group by amount having count(amount)<2 order by amount
So I then expanded it to read
select Count(amount),amount,name from bids group by amount,name having count(amount)<2 order by amount
not sure where i'm going wrong but the results returned were
0.03
0.03
0.05
0.06
0.07
0.07
Appreciate any help here.
Hello,
I have a table with sixty columns in it, five of which define uniqueness for the records. Currently there are 190,775 records in the table. One of the records is a duplicate. I need to insert only the unique records from this table (all columns) into another table. I cannot use a unique nonclistered index with IGNORE_DUP_KEY in the destination table because of a problem I am having with the 'duplicate key was ignored' message. The destination table has a primary key with a clustered index on the same five columns.
How can I put together a SELECT statement that will give me all of the columns in the source table based on uniqueness of the five key columns?
Does my request make sense? Please let me know if you have questions.
Thank you for your help!
CSDunn
Let's say I have a data entry from a pool of employees:
table is as follow:
EmpNo Branch Date Amount
1 A101 11/30/2007 $0.90
1 A101 11/30/2007 $1.20
2 A101 11/30/2007 $0.90
3 A101 11/30/2007 $0.80
How can I select the whole table and only take in 1 unique latest entry if there are multiple entries for the same day, same branch under same employee number?
Thanks! :D
I am trying to create a select query similar to the following but the problem I am having is that I want to only select one record where there may be several with the same dw_order_no. I have tried various ways using SQL developer but without success
SELECT VE_EZP_ORDER_TRANS.EZP_BILL_STATUS AS EZP_BILL_STATUS1,
VE_EZP_AGED_CUSTOMER_DEBT.SURNAME,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE_CATEGORY,
VE_EZP_AGED_CUSTOMER_DEBT.DEBT_AGE,
VE_ORDERLINE.DW_ORDER_NO,
[code]...