i have problem updating the integer in the access table i have the the statement as below but it appear to have an error data mismatch,any1 can help me please
Dim updatethread As String
updatethread = "UPDATE Thread " + "SET replies = ' replies+ 6'" + "where threadid=@threadid"
Hi,Is it possible for me to store 000 or 01 or 001 in an Integer data type in SQL Server without it dropping the leading zeros?
Thanks
Is there a way to query all the columns in a database that have the data type as Integer.
View 9 Replies View RelatedI am dealing with what I believe is Oracle that is the source of a SQL View.
I am seeing a data type of Integer in the View, but I am not able to see what makes up that View. When I query the View, I can see that an Integer data type column is storing a blank space. I use ISNUMERIC(ColumnName) = 0 and there are a lot of rows that show as a zero length blank space, or text, or something. I just know that it is not an Integer.
I have attempted to CAST and Convert this value, but it will not. I have changed the data type on the table that is being inserted in too, and it still fails with a Conversion error. I have tried REPLACE(), but still the same conversion error.
I need to convert a a string column to integer. Before converting, I need to check if it has blank values then convert it to NULL. Someone told me that its easier to convert it to NULL before converting to integer.
View 5 Replies View RelatedHi all,
I am developing ASP.NET 1.1 application using VB.NET & SQL Server, on my machine I am using SQL Server 2000, and everything is working just fine.
The problem appears when I uploaded the site to the Host, they are using SQL Server 2005, is there any reason for this, I am using casting in the code, and I am sure there is something wrong with the hosting settings.
Any suggestions.
Best Regards
Wafi Mohtaseb
this is in form VB
Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click
sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;")
sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
sqlconnection.Open()
sqldatareader = sqlcommand.ExecuteReader()
ListBox1.Items.Add(sqldatareader.Item("LastName") & " " & sqldatareader.Item("FirstName")
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate,
Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price)
FROM Flight INNER JOIN
Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN
Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN
Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN
Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID
WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1)
it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
I have a field ID of type integer, I want to put two numbers in that field: 3 and 7, so what I do is just store the number 37.Now, is there a command in SQL server which checks if the ID field contains a number I look for, say 7.Something like a CONTAINS keyword...If there is, could someone please tell me what it is AND tell me a bit more about it :memory usage, (dis)advantages etc.
View 1 Replies View RelatedSQL command ....
declare @found int;
set @found = 'select sid from StickyContent where StickyId='+0+' and UserId='+171
exec (@found)
delete from StickyContent where sid = @found
I need to pass this statement from my UI i.e in a single query. I am getting this error.
"Conversion failed when converting the varchar value 'select sid from StickyContent where StickyId=' to data type int.
"
I have Repeater which has checkbox to delete selected items.
Dim strID As String = ""
Dim newStrID As String = ""Dim anItem As RepeaterItem
For Each anItem In Repeater1.ItemsDim chkBoxDelete As CheckBox = anItem.FindControl("Delete")
If chkBoxDelete.Checked Then
strID += (CType(anItem.FindControl("ID"), Label)).Text + ", "
End If
Next
If Len(strID) > 1 Then
newStrID = Left(strID, Len(strID) - 2)
Else
newStrID = ""
End If
It's working great, but if I implement it with Update statement, it doesn't work when it has more than one items (it's working fine with one item).
If I just print the statement, it's
UPDATE dbo.mytable SET active='N' WHERE id IN (1, 2, 3, 4)
Dim sqlStr As String
sqlStr = "UPDATE dbo.mytable SET active='N' WHERE id IN (" + newStrID + ")"
Dim cmdUpdate As New SqlCommand(sqlStr, conn)
I think it's because of data type, since id is Integer and newStrID is string. What should I do to make it work?
Thank you.
Hello,
I have a SQL update statement that updates some user names, however, the user names exceed the length of the data type. Currently, for the column username the data type is set to nvarchar (8).
How can I change that to nvarchar(10) in a SQL Update statement?
Thanks in advance.
I'm having a heckuva time with creating output parameters based on a query.
Here's what I'm doing. Every day, we copy rows from our mysql table to our sql server table. We only want to copy those rows that are new, so as to not have to recopy the entire table.
So I have a DataReader Source set to Ado.net/odbc provider that connects to the mysql db.
The destination is an OLE connection to the local sql server.
I create an Execute SQL Task.
The connection is set to the OLE connection
The type is direct input
The SQL Statement is "select max(id) from copy_table"
In Parameter Mapping, I create a user variable called maxId that is an int64. That variable is now used as the Variable Name. The Direction is Output. The Parameter Name is 0.
Whatever data type I use for the mapping does not work with the variable type. If the parameter was set to ULARGE_INTEGER, here's the error
[Execute SQL Task] Error: Executing the query "SELECT MAX(stats_id) AS max_id FROM copy_table" failed with the following error: "Type name is invalid.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If parameter is set to LONG:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "maxId": "The type of the value being assigned to variable "User::maxId" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I found that if variable and parameter were dates to use datetime for the variable and DBTIMESTAMP for the parameter.
There are an awful lot of combinations between all the possible variable types, and the possible parameter types. Does anyone know the secret combination for your typical integer?
Thanks,
Lori
I am attempting to convert an integer value to a string using the Derived Column transformation with the following expression on the field:
(DT_STR,10,1252)prod_id
prod_id is an integer. I was able to do this before however, in the past couple of days, this has failed with the following error:
"An error occurred while attempting to perform a type cast."
To my knowledge, I have not changed anything about this particular data flow within the past couple of days. I have verified that the value is coming in as an integer.
Any help would be greatly appreciated.
I need to update a large table, about 55 million rows, without filling the transaction log, in the shortest time as possible. The goal is to alter the table and change the data type for Text column from VARCHAR(7900) to NVARCHAR(MAX).
Since I cannot do it with an ALTER TABLE statement (it would fill up the transaction log) I'm thinking to:
- rename column Text in Text_OLD
- add Text column of type NVARCHAR(MAX)
- copy values in batches from Text_OLD to Text
The table is defined like:
create table DATATEXT(
rID INTEGER NOT NULL,
sID INTEGER NOT NULL,
pID INTEGER NOT NULL,
cID INTEGER NOT NULL,
err TINYINT NOT NULL,
[Code] ....
I've thought about a stored procedure doing this but how to copy values in batch from Text_OLD to Text.
The code I would start with (doing just this part) is the following, but maybe there are more efficient ways to do it, or at least there's a better way to select @startSeq in the WHILE loop (avoiding to select a bunch of 100000 sequences and later selecting the max).
declare @startSeq timestamp
declare @lastSeq timestamp
select @lastSeq = MAX(sequence) from [DATATEXT] where [Text] is null
select @startSeq = MIN(Sequence) FROM [DATATEXT] where [Text]is null
BEGIN TRANSACTION T1
WHILE @startSeq < @lastSeq
[Code] ....
Hi everybody,
Could someone help me ???
Iam starting with sql
My problem ..
Ihave a table Table_customer
In this table a column Table_customer.no
This column contain 8000 rows.
with customer numbers: like 30789
I would like to modify once all this row adding just before the number
a value to all these rows.This value will be a 60
So will have instaed of 30789 a 6030789
This column is an integer.
I have try a simple select wich give me this result
How i can do this with update ?
probably i have to convert fisrt to caracters
select kunr,nov_kunr=
'30'+ltrim(str(kunr))
from event
where kunr is not null
Thank
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedAfter testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Working on a new database where the Date and Time are stored in a Date Time Field.
Then working on an OLDER database file within the same SQL Database contains these 2 items as integers:
transDate = "71615" (July 16, 2015)
transTime = "12345" (01:23:45 AM)
How do we convert both of them into a single SQL DateTime field such as "2015-07-16 01:23:45.000" so that it can be used in a join restricting to a date time in a different SQL File that properly has the DateTime in it?
This works well for converting the transDate Part in the select statement:
  dbo.IntegerToDate(at.transDate) as transDate
  * That returns: "2015-07-16 00:00:00.000"
* The resulting data must work directly in a Microsoft SQL Server Management Studio Query using either using the "on" statement or part of the "where" clause. In other words, NOT as a stored procedure!
Also must be able to be used as a date difference calculation when comparing the 2 files Within say + or - 5 seconds.
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedHi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedHi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
I am a TSQL Newbie trying to concatenate two columns (DocumentNo & SequenceNo) that were created with a €œsmallint€? data type constraint in a full-text search database. I want to end up with a column containing varchar data such as €œ5-2€? where this row of data contains information about the 2nd document in a series for a person or group designated as 5.
If I could change the data type for the columns to varchar I think I could query them like this:
SELECT ("DocumentNo" + '-' + "SequenceNo") AS DocumentNoFull
FROM Full_Documents
ORDER BY DocumentNo, SequenceNo
When I try to concatenate with this query the result is a mathematical addition of the numbers, not what I am trying to achieve (which is to combine the two numbers to produce a text string).
Due to the full-text search parameters for the database I have not been able to modify the data type constraints on the two relevant columns. Is there a way to concatenate the two €œsmallint€? columns and create a new column with text data (e.g., 5-2) for each row in the table?
My research suggests that €œcasting€? could be used to convert between data types, but I have not been able to figure out how to apply it to my situation. Any help would be appreciated.
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
I want to display the following output where integer value is column data.
{[Advertiser].[AdvertiserKey].&[4000],
[Advertiser].[AdvertiserKey].&[4001],
[Advertiser].[AdvertiserKey].&[4002],
[Advertiser].[AdvertiserKey].&[4003],
[Advertiser].[AdvertiserKey].&[3661],
[Advertiser].[AdvertiserKey].&[3662]
}