I am having an issue with this SQL Statement i am trying to write. i want to insert the values (Test Facility) from CCID table INTO CCFD table where CCID.id = CCFD.id this is what i have.
UPDATE CCFD.id
SET TEST_FACILITY = (SELECT CCID.id.TEST_FACILITY
FROM CCID.id
WHERE CCID.id = CCFD.id)
or
INSERT INTO CCFD.id
(Test_Facility)
SELECT TEST_FACILITY
FROM CCID.id
WHERE (CCFD.id.INDEX_ID = CCID.id.INDEX_ID)
thanks in advanced
What I am attempting to do here is check to see if a record exists in a table, if so, I will update some fields, if not, I will insert a new record into the table. This is what I have so far, I was hoping someone could let me know if any of these elements are unnecessary. SELECT [IP] FROM [Table]if (strIP == @IP){ UPDATE [Table] SET [Column = value++]} else{ INSERT INTO [Table] (IP) VALUES (@IP) } I obviously left out parameters and whatnot, I am mainly concerned with the logic here. My apologies if this is something simple.
View 9 Replies View RelatedIn one statement (or whatever is most efficient if not possible), how do I update the rows in table A (based on a where clause), and insert into table B, the data from those same number of rows.
For example,
Table A: columns: id , lastName, department, branch
Table B: columns: id, errorMessage, lastName
UPDATE table A by settting branch = 'ETC' where department IS NULL
INSERT INTO table b the rows found in the above UPDATE statement
Note: 1.To find the rows UPDATED in the first statement, it is not sufficient to search by branch='ETC', as that will encompass more rows.
2. I do not want to use triggers as these statements will be executed once in the entire process
Is it possible to use CASE statement with INSERT /UPDATE statement?this is what i am trying to do
i have a table like this
Field1 Field2 Field3 FieldType1 FieldType2 FieldType3
1-when there is no data for a given combination of Field2 and Field3,i need to do "insert".i.e the very first time and only time
2-Second time,when there is already a row created for a given combination of Field2 and Field3,i would do the update onwards from there on.
At a time value can be present for only one of the FieldType1,FieldType2,FieldType3) for insert or update
I am passing a parameter to the stored procedure,which needs to be evaluated and wud determine,which field out of (FieldType1,FieldType2,FieldType3)has a value for insert or update .this is what i am trying to do in a stored procedure
CREATE PROCEDURE dbo.StoredProcedure
( @intField1 int, @intField2 int, @intField3 int, @intFieldValue int , @evalFieldName varchar(4) )So i am trying something like
CaseWHEN @evalFieldName ="Fld1" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,@intFieldValue,cast(null as int) fld2 ,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld2" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,@intFieldValue,cast(null as int) fld3)
CaseWHEN @evalFieldName ="Fld3" THENINSERT INTO TABLE1 (Field2,Field3,fieldType1,FieldType2,FieldType3)values (@intField1,@intField2,@intField3,cast(null as int) fld1 ,cast(null as int) fld2,@intFieldValue)
END
similar trend needs to be followed for UPDATE as well..obiviousely its not working,gives me synatax error at case,when,then everywher.so can someone suggest me the alternative way?..i am trying to avoid writing stored procedure to insert/update for each individual fields..thanks a lot
Using ms sql 2000I have 2 tables.I have a table which has information regarding a computer scan. Eachrecord in this table has a column called MAC which is the unique ID foreach Scan. The table in question holds the various scan results ofevery scan from different computers. I have an insert statement thatworks however I am having troulbe getting and update statement out ofit, not sure if I'm using the correct method to insert and thats why orif I'm just missing something. Anyway the scan results is stored as anXML document(@iTree) so I have a temp table that holds the releventinfo from that. Here is my Insert statement for the temporary table.INSERT INTO #tempSELECT * FROM openxml(@iTree,'ComputerScan/scans/scan/scanattributes/scanattribute', 1)WITH(ID nvarchar(50) './@ID',ParentID nvarchar(50) './@ParentID',Name nvarchar(50) './@Name',scanattribute nvarchar(50) '.')Now here is the insert statement for the table I am having troublewith.INSERT INTO tblScanDetail (MAC, GUIID, GUIParentID, ScanAttributeID,ScanID, AttributeValue, DateCreated, LastModified)SELECT @MAC, #temp.ID, #temp.ParentID,tblScanAttribute.ScanAttributeID, tblScan.ScanID,#temp.scanattribute, DateCreated = getdate(),LastModified =getdate()FROM tblScan, tblScanAttribute JOIN #temp ONtblScanAttribute.Name =#temp.NameIf there is a way to do this without the temporary table that would begreat, but I haven't figured a way around it yet, if anyone has anyideas that would be great, thanks.
View 3 Replies View RelatedIn MS Access I can do in one SQL statement a update if exists else ainsert.Assuming my source staging table is called - SOURCE and my targettable is called - DEST and both of them have the same structure asfollowsKeycolumns==========MaterialCustomerYearNonKeyColumns=============SalesIn Access I can do a update if the record exists else do a insert inone update SQL statement as follows:UPDATE DEST SET DEST.SALES = SOURCE.SALESfrom DEST RIGHT OUTER JOIN SOURCEON (DEST.MATERIAL = SOURCE.MATERIAL ANDDEST.CUSTOMER = SOURCE.CUSTOMER ANDDEST.YEAR = SOURCE.YEAR)This query will add a record in SOURCE into DEST if that record doesnot exist in DEST else it does a update. This query however does notwork on SQL 2000Am I missing something please share your views how I can do this inSQL 2000.ThanksKaren
View 6 Replies View Related In VB6 using MDAC 2.8 I could do a single select statement that would act as either an Insert or an update. Is there a way to do this in ADO.net?
My old VB6 code
Dim dbData As New ADODB.Connection
Dim rs1 As New ADODB.Recordset
Dim strParm As String
Dim strCusNo As String
'
strParm = "Provider=SQLOLEDB; Data Source=SQL2000; Initial Catalog=DATA_01; User ID=UserName; Password=password"
dbData.Open strParm
'
strParm = "Select CusNo from CusFil Where CusNo = '" & strCusNo & "'"
rs1.Open strParm, dbData, adOpenStatic, adLockOptimistic, adCmdText
If rs1.BOF And rs1.EOF Then
rs1.AddNew
Else
End If
With rs1
!CusNo = strCusNo
.Update
End With
rs1.Close
'
Set rs1 = Nothing
dbData.Close
Set dbData = Nothing
Is there an ADO.Net equivalent?
thanks,
Hello,
Server hardware: Intel core 2 duo, 2Gb ram, SATA 1500Gb, SQL Server 2005
I have big table (~ from 50000 to 500000 rows) :
Code Snippet
CREATE TABLE [dbo].[CommonPointValues](
[ID] [bigint] IDENTITY(1,1) NOT NULL,
[pointID] [bigint] NOT NULL,
[pointValue] [numeric](10, 2) NOT NULL,
[qualityID] [int] NOT NULL,
[dateFrom] [datetime] NULL,
[dateTo] [datetime] NULL,
CONSTRAINT [PK_PointValues] PRIMARY KEY CLUSTERED
(
[ID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 100) ON [PRIMARY]
) ON [PRIMARY]
UPDATE statement:
Code SnippetUPDATE dbo.CommonPointValues SET dateTo = @last_update WHERE ID = @lastValID
2000 rows update takes about 1 sec.
INSERT statement:
Code Snippet
INSERT INTO dbo.CommonPointValues (pointID, pointValue, qualityID, dateFrom, dateTo )
VALUES (@point_id, @value_new, @quality_new, @last_update, @last_update )
Speed with INSERT is similar like with UPDATE.
I need about 10000 updates per 1 second and 10000 inserts per 1 second or together 5000 inserts and 5000 updates per 1 sec.
Should I update hardware or try some improvements to table structure.
Using MS SQL 2000I have a stored procedure that processes an XML file generated from anAudit program. The XML looks somewhat like this:<ComputerScan><scanheader><ScanDate>somedate&time</ScanDate><UniqueID>MAC address</UniqueID></scanheader><computer><ComputerName>RyanPC</ComputerName></computer><scans><scan ID = "1.0" Section= "Basic Overview"><scanattributes><scanattribute ID="1.0.0.0" ParentID=""Name="NetworkDomian">MSHOMe</scanattribute>scanattribute ID = "1.0.0.0.0" ParentID="1.0.0.0", etc etc....This is the Update portion of the sproc....CREATE PROCEDURE csTest.StoredProcedure1 (@doc ntext)ASDECLARE @iTree intDECLARE @assetid intDECLARE @scanid intDECLARE @MAC nvarchar(50)CREATE TABLE #temp (ID nvarchar(50), ParentID nvarchar(50), Namenvarchar(50), scanattribute nvarchar(50))/* SET NOCOUNT ON */EXEC sp_xml_preparedocument @iTree OUTPUT, @docINSERT INTO #tempSELECT * FROM openxml(@iTree,'ComputerScan/scans/scan/scanattributes/scanattribute', 1)WITH(ID nvarchar(50) './@ID',ParentID nvarchar(50) './@ParentID',Name nvarchar(50) './@Name',scanattribute nvarchar(50) '.')SET @MAC = (select UniqueID from openxml(@iTree, 'ComputerScan',1)with(UniqueID nvarchar(30) 'scanheader/UniqueID'))IF EXISTS(select MAC from tblAsset where MAC = @MAC)BEGINUPDATE tblAsset set DatelastScanned = (select ScanDate fromopenxml(@iTree, 'ComputerScan', 1)with(ScanDate smalldatetime'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScan set ScanDate = (select ScanDate fromopenxml(@iTree,'ComputerScan', 1)with(ScanDate smalldatetime 'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScanDetail set GUIID = #temp.ID, GUIParentID =#temp.ParentID, AttributeValue = #temp.scanattribute, LastModified =getdate()FROM tblScanDetail INNER JOIN #tempON (tblScanDetail.GUIID = #temp.ID ANDtblScanDetail.GUIParentID =#temp.ParentID AND tblScanDetail.AttributeValue = #temp.scanattribute)WHERE MAC = @MAC!!!!!!!!!!!!!!!!!! THIS IS WHERE IT SCREWS UP, THIS NEXT INSERTSTATEMENT IS SUPPOSE TO HANDLE attributes THAT WERE NOT IN THE PREVIOUSSCAN SO CAN NOT BE UDPATED BECAUSE THEY DON'T EXISTYET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!INSERT INTO tblScanDetail (MAC, GUIID, GUIParentID,ScanAttributeID,ScanID, AttributeValue, DateCreated, LastModified)SELECT @MAC, b.ID, b.ParentID,tblScanAttribute.ScanAttributeID,@scanid, b.scanattribute, DateCreated = getdate(), LastModified =getdate()FROM tblScanDetail LEFT OUTER JOIN #temp a ON(tblScanDetail.GUIID =a.ID AND tblScanDetail.GUIParentID = a.ParentID ANDtblScanDetail.AttributeValue = a.scanattribute), tblScanAttribute JOIN#temp b ON tblScanAttribute.Name = b.NameWHERE (tblScanDetail.GUIID IS NULL ANDtblScanDetail.GUIParentID ISNULL AND tblScanDetail.AttributeValue IS NULL)ENDELSEBEGINHere are a few table defintions to maybe help out a little too...if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblScan_tblAsset]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblScan] DROP CONSTRAINT FK_tblScan_tblAssetGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblAsset]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblAsset]GOCREATE TABLE [dbo].[tblAsset] ([AssetID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[AssetTypeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DatelastScanned] [smalldatetime] NULL ,[NextScanDate] [smalldatetime] NULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NULL) ON [PRIMARY]GO-----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScan]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblScan]GOCREATE TABLE [dbo].[tblScan] ([ScanID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetID] [int] NULL ,[ScanDate] [smalldatetime] NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScanDetail]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblScanDetail]GOCREATE TABLE [dbo].[tblScanDetail] ([ScanDetailID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOTNULL ,[ScanID] [int] NULL ,[ScanAttributeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[GUIID] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL,[GUIParentID] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[AttributeValue] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO------------------------------------------------------------My problem is that Insert statement that follows the update intotblScanDetail, for some reason it just seems to insert everything twiceif the update is performed. Not sure what I did wrong but any helpwould be appreciated. Thanks in advance.
View 9 Replies View RelatedHi AllgI have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advancehttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPGhttp://img139.a.com/img.php?image=28285_2_122_937lo.JPG
View 1 Replies View Related
here is my code:
Dim cn As New System.Data.SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("LocalSqlServer").ToString())
cn.Open()
Dim adapter1 As New System.Data.SqlClient.SqlDataAdapter()
adapter1.SelectCommand = New Data.SqlClient.SqlCommand("update aspnet_Membership_BasicAccess.Products
set id = '" & textid.Text & "', name = '" & textname.Text & "', price = '" & textprice.Text & "', description = '" &
textdescription.Text & "', count = '" & textcount.Text & "', pictureadd = '" & textpictureadd.Text & "', artist = '" &textartist.Text & "', catergory = '" & textcategory.text & "' where id = " & Request.Item("id") & ";", cn)
cn.Close()
Response.Redirect("database.aspx")
it posts and the page loads but the data is still the same in my datagrid. what could be wrong with this simple statement... i've tried testing the statement above with constant values of the correct type but i don't think that matters because the SqlCommand() accepts a string only anyways.. doesn't it?
Dear All,
Im using VS2008, visual basic and SQL Server express.
General questions please: Is it necessary, to issue some sort of command, to 'commit' data to a SQL express database after a INSERT or UPDATE sql command?
I'm getting strange behavior where the data is not refreshed unless i exit my app and re-enter. In other words, i can run a sql command , the data is apparantly saved (because i get no errors) then if i refresh a data set or do a sql select query the data that i expect to return is not there.
Im fairly new to SQL express (and SQL server generally) so i dont know if its my coding or i need to switch some 'feature'
on/off or not.
I hope thats clear
Also, could someone point me to documentation that explains each parameter in the connection string
Many Thanks
Chris Anderson
My code is:
ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=C:myfile.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True"
Connection = New SqlConnection
Connection.ConnectionString = ConnectionString
Connection.Open()
'''''''''''''''''the above code is done at the start of my application
'''''''this code below called during application many times
dim sql as string = "my sql string here"
Dim cmd As SqlCommand = Nothing
cmd = New SqlCommand(sql, Connection)
Try
cmd.ExecuteNonQuery()
Catch err As SqlException
MessageBox.Show(err.Message.ToString())
MessageBox.Show(sql, "SQL ERROR: ", MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
cmd.Dispose()
Hello All
I have had asked the same question in another post, i didnt get answer to it i might have had asked it wrongfully
Soo the question is: When creating a SQLDataSource in the wizard you get to the pont where you select the option . It says that by using this datasource you can select to update delete and insert. So my question is if i am creating a select statement to reterieve the data from the Table, then what does it do it do if my intention is to only reterie the data. Or what is the other way that it could be helpful to me ??
thanks all I hope it make sence, if not I wrill write another post to bring step by step info into it.
I have a GridView dispalying from a SQLServerDataSource that is using a SQL Select Union statement (like the following):
SELECT FirstName, LastNameFROM MasterUNION ALLSELECT FirstName, LastNameFROM CustomORDER BY LastName, FirstName
I am wondering how to create Update and Insert statements for this SQLServerDataSource since the select is actually driving from two different tables (Master and Custom). Any ideas if or how this can be done? Specifically, I want the Custom table to be editable, but not the Master table. Any examples or ideas would be very much appreciated!
Thanks,
Randy
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies View Relatedi was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
Hello,I am trying to update records in my database from excel data using vbaeditor within excel.In order to launch a query, I use SQL langage in ADO as follwing:------------------------------------------------------------Dim adoConn As ADODB.ConnectionDim adoRs As ADODB.RecordsetDim sConn As StringDim sSql As StringDim sOutput As StringsConn = "DSN=MS Access Database;" & _"DBQ=MyDatabasePath;" & _"DefaultDir=MyPathDirectory;" & _"DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;" &_"PWD=xxxxxx;UID=admin;"ID, A, B C.. are my table fieldssSql = "SELECT ID, `A`, B, `C being a date`, D, E, `F`, `H`, I, J,`K`, L" & _" FROM MyTblName" & _" WHERE (`A`='MyA')" & _" AND (`C`>{ts '" & Format(Date, "yyyy-mm-dd hh:mm:ss") & "'})"& _" ORDER BY `C` DESC"Set adoConn = New ADODB.ConnectionadoConn.Open sConnSet adoRs = New ADODB.RecordsetadoRs.Open Source:=sSql, _ActiveConnection:=adoConnadoRs.MoveFirstSheets("Sheet1").Range("a2").CopyFromRecordset adoRsSet adoRs = NothingSet adoConn = Nothing---------------------------------------------------------------Does Anyone know How I can use the UPDATE, DELETE INSERT SQL statementsin this environement? Copying SQL statements from access does not workas I would have to reference Access Object in my project which I do notwant if I can avoid. Ideally I would like to use only ADO system andSQL approach.Thank you very muchNono
View 1 Replies View RelatedIt appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.
View 5 Replies View RelatedAn insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
thanks
Hello,
I'm writing a fairly involved stored procedure. In this Stored Procedure, I have an update statement, followed by a select statement. The results of the select statement should be effected by the previous update statement, but its not. When the stored procedure is finish, the update statement seemed to have worked though, so it is working.
I suspect I need something, like a GO statement, but that doesnt seem to work for a stored procedure. Can anyone offer some assistance?
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
View 6 Replies View RelatedHi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I'm working on inserting data into a table in a database. The table has two separate triggers, one for insert and one for update (I don't like it this way, but that's how it's been for years). When there is a normal insert, done via a program, it looks like the triggers work fine. When I run an insert manually via a script, the first insert trigger will run, but the update trigger will fail. I narrowed down the issue to a root cause.
This root issue is due to both triggers using the same temporary table name. When the second trigger runs, there's an error stating that a few columns don't exist. I went to my test server and test db and changed the update trigger so that the temporary table is different than the insert trigger temporary table, the triggers work fine. The weird thing is that if the temporary table already exists, when the second trigger tries to create the temporary table, I would expect it to fail and say that it already exists.I'm probably just going to update the trigger tonight and change the temporary table name.
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
Hello,I am writing a stored procedure that will take data from severaldifferent tables and will combine the data into a single table for ourdata warehouse. It is mostly pretty straightforward stuff, but there isone issue that I am not sure how to handle.The resulting table has a column that is an ugly concatenation fromseveral columns in the source. I didn't design this and I can't huntdown and kill the person who did, so that option is out. Here is asimplified version of what I'm trying to do:CREATE TABLE Source (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,ssn CHAR(9) NOT NULL )GOALTER TABLE SourceADD CONSTRAINT PK_SourcePRIMARY KEY CLUSTERED (grp_id, mbr_id)GOCREATE TABLE Destination (grp_id INT NOT NULL,mbr_id DECIMAL(18, 0) NOT NULL,birth_date DATETIME NULL,gender_code CHAR(1) NOT NULL,member_ssn CHAR(9) NOT NULL,subscriber_ssn CHAR(9) NOT NULL )GOALTER TABLE DestinationADD CONSTRAINT PK_DestinationPRIMARY KEY CLUSTERED (grp_id, mbr_id)GOThe member_ssn is the ssn for the row being imported. Each member alsohas a subscriber (think of it as a parent-child kind of relationship)where the first 9 characters of the mbr_id (as a zero-padded string)match and the last two are "00". For example, given the followingmbr_id values:1234567890012345678901123456789021111111110022222222200They would have the following subscribers:mbr_id subscriber mbr_id12345678900 1234567890012345678901 1234567890012345678902 1234567890011111111100 1111111110022222222200 22222222200So, for the subscriber_ssn I need to find the subscriber using theabove rule and fill in that ssn.I have a couple of ideas on how I might do this, but I'm wondering ifanyone has tackled a similar situation and how you solved it.The current system does an insert with an additional column for thesubscriber mbr_id then it updates the table using that column to joinback to the source. I could also join the source to itself in the firstplace to fill it in without the extra update, but I'm not sure if theextra complexity of the insert statement would offset any gains fromputting it all into one statement. I plan to test that on Monday.Thanks for any ideas that you might have.-Tom.
View 4 Replies View RelatedCan I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end)
scenario
In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table.
I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance