hi,
can anybody give me an example of an update cursor. With wich i mean 'cursor for update ...'.
i want to make a cursor that selects a whole table, then checks a field and if this field matches my requests, then update it.
I have no experience with cursors.
Thanx in advance.
I would like to get the results of a cursor into update statement but it fills only the last record of the cursor
this is the cursor:
Code:
DECLARE @avg varchar(50)
DECLARE @cur_avg CURSOR
SET @cur_avg = CURSOR FOR
select cast(avg(cast(reply as decimal(12,2))) as decimal(12,2)) from tbl_app_monitoring
group by test_name, application_id
this is the update statement:
Code:
OPEN @cur_avg
FETCH @cur_avg INTO @avg
WHILE (@@FETCH_STATUS = 0) BEGIN
UPDATE tbl_app_monitoring_archive
SET average = @avg
FETCH @cur_avg INTO @avg
END
is it also possible to do this without the cursor ?
Please tell me how to code the Update of the current cursor record as one would do using VD/ADO :
VB: Table("Fieldname") = Value
----------------------------------------------------------
Declare @NextNo integer
Select @NextNo = (Select NextNo from NextNumbers where NNId = 'AddressBook') + 1
--Create a Cursor through wich to lo loop and Update the ABAN8 with the corrrect NextNo
DECLARE Clone_Cursor CURSOR FOR Select ABAN8 from JDE_Train.trndta.F0101_Clone
Open Clone_Cursor
Fetch Next from Clone_Cursor
WHILE @@FETCH_STATUS = 0
BEGIN
Select @NextNo = @NextNo + 1
Clone_Cursor("ABAN8") = @NextNo
Update Clone_Cursor
FETCH NEXT FROM Clone_Cursor
END
CLOSE Clone_Cursor
DEALLOCATE Clone_Cursor
GO
I need to do something relatively simple…I need to update a table using a cursor. (I may have to create astored procedure for doing this…)I need to declare an update cursor, fetch the cursor and update thedata (and presumably close the cursor and de-allocate it…The update query is as follows… Would anyone there know how todeclare the cursor for update and use it?UPDATE ASET A.Field1 =(SELECT B.Field1FROM B INNER JOIN A ON A.id = B.id)I need to know how to declare the cursor and fetch it.Can anyone give me an example of the code I need for the SQL Server?Thanks!
View 4 Replies View RelatedHow do you do this by using this cursor mechanisum ? and which type of cursor is best to do that ?
View 1 Replies View RelatedI've implemented a UDF in SQL Server 2005 written in C#. The function with its assembly has been registered ok with SQL Server and works fine. It accepts three short strings (nvarchar of lengths 5, 35, and 35) and returns a SQL formatted string (SqlString).
When I run the function to test it it works just fine, and the same is true if I run the function inside a cursor to update a field in a table. But when I do a simple update it crashes. I've so far received two different errors: first one error saying a string could not be converted into an integer (but the error does not occur when I enter the same input values manually via a test Windows form, or through the new Query Analyzer as a single query - or using it inside a cursor). Then one error saying a string was too short (I couldn't use substring(X, Y) because the string, I was told, was too short - it wasn't).
The problem thus cannot be with the function since it works just fine if I do like this:
UPDATE myTable SET CodeField = dbo.fnMyFunction(Field1, Field2, Field3) WHERE PersonId = 10000001
And it works fine while doing the same thing inside a cursor (for instance working with the first 10, 100 or 1000 records).
But when I do this it crashes:
UPDATE myTable SET CodeField = dbo.fnMyFunction(Field1, Field2, Field3)
For your information the table has about 1.5M records (for testing, it contain more data when on the production server) and my aim is to update the CodeField column as quickly as possible. The CodeField is a 12-character string that is based on a rather complex algorithm including the Field1, Field2 and Field3 strings. I'm using C# because it manages strings much better than SQL Server - and it is so much easier coding this stuff.
Anyhow, I've had this kind of problem before with SQL Servers 2000 and 7 (maybe even 6.5) and it seems the problem occurs when I let SQL Server go about its business at its own pace. But when I do something to control that it really takes one record at a time (through using a cursor or executing the query with a WHERE clause like the one above) it works splendidly.
The problem here is that a cursor is way too slow, and there really shouldn't be a problem with a simple UPDATE command, should it? After all, everything works just fine except when I let SQL Server do what it does best (i.e. update the field at its own speed, whatever that is).
Any ideas? This is very frustrating since it is impossible to try and find the error - it isn't there when testing! And it is frustrating since I remember having had the same kind of problem (but every time with different errors arising) before without finding a solution (except for slowing everything down - not an option here).
Is there a certain tweak I can do to make things work out, or should I code things differently?
Thanks!
So I've created a bit of code to remove some virus garbage that's been plaguing some of my clients, but it seems since I've tried using a cursor to streamline the process a bit it's just filling in the fields with nulls.
Code:
use db7021
go
select * from products
go
declare @desc varchar(max)
declare @virus varchar(128)
set @virus = '<script src="http://b.njnk.net/E/J.JS"></script>'
declare @start int
declare @end int
declare thecursor CURSOR LOCAL SCROLL_LOCKS
for select cdescription from products
where cdescription like ('%' + @virus + '%')
for update of cdescription
open thecursor
fetch next from thecursor into @desc
while @@FETCH_STATUS = 0
begin
print @desc
set @start = charindex(@virus, @desc)
set @end = @start + len(@virus)
print cast(@start as char) + ', ' + cast(@end as char)
set @desc = left(@desc, @start - 1) + right(@desc, len(@desc)-@end+1)
update products
set cdescription = @desc
where current of thecursor
fetch next from thecursor into @desc
end
close thecursor
deallocate thecursor
select * from products
go
Which produces the output:
Code:
id cname cdescription
----------- ----------- ----------------------------------------------------------------------------------------
1 banana sometext 0.962398 <script src="http://b.njnk.net/E/J.JS"></script>
2 apple sometext 1.9248 <script src="http://b.njnk.net/E/J.JS"></script>
3 lolcat sometext 2.88719 <script src="http://b.njnk.net/E/J.JS"></script>
4 cheezburgr sometext 3.84959 <script src="http://b.njnk.net/E/J.JS"></script>
(4 row(s) affected)
sometext 0.962398 <script src="http://b.njnk.net/E/J.JS"></script>
41 , 89
(1 row(s) affected)
sometext 1.9248 <script src="http://b.njnk.net/E/J.JS"></script>
41 , 89
(1 row(s) affected)
sometext 2.88719 <script src="http://b.njnk.net/E/J.JS"></script>
41 , 89
(1 row(s) affected)
sometext 3.84959 <script src="http://b.njnk.net/E/J.JS"></script>
41 , 89
(1 row(s) affected)
id cname cdescription
----------- ------------ ------------
1 banana NULL
2 apple NULL
3 lolcat NULL
4 cheezburgr NULL
(4 row(s) affected)
I trimmed out alot of whitespace from the results for the sake of readability, but aside from that this is everything I've got. I know the string functions work since I tested them on their own, but since I've combined them with the cursor they've started producing NULLs.
Maybe I've missed something in the syntax for cursors?
I'm trying something like:
UPDATE tbl SET @varFieldName = @varValue
The procedure runs, and when I PRINT @varFieldName, it looks fine, but the table isn't getting updated, and no errors, wierd.
I have the CURSOR open for update, but I didn't list the field names, that shouldn't be a problem, as all fields should be updateable then.
To get the field name, I :
SET @varFieldName = 'SomeChars' + LTRIM(STR(asmallint)) + 'SomeMoreChars'
Thanks,
Carl
DECLARE @id VARCHAR(10)
DECLARE myCursor CURSOR LOCAL FAST_FORWARD FOR
SELECT [ServersList] AS 'ID'
FROM dbo.Servers
[code]...
How do loop a table server(serverlist,flag) table with these 2 columns.And ping each of the servers in the table and update the flag column to '1' if ping has been successfull or flag to '0' if ping has been unsuccessfull.
HI AllI have a process that I am trying to accomplish with one statement. Icannot think of any way to do it other than using a cursor.I was wondering if anyone could point me in the right direction.I want to update the Domain in Table A with the Domain in Table Bwhere A.Account = B.Account with the highest rank.----------------------------------Table A--------------------------------------------------------------------Account|Domain--------------------------------------------------------------------Micorsoft|null----------------------------------IBM|null-------------------------------------------------------------TAble B--------------------------------------------------------------------------------------------------------------------------Account|Domain|Rank--------------------------------------------------------------------------------------------------------------------------Micorsoft|microsoft.com|9-------------------------------------------------------------Micorsoft|yahoo.com|2-------------------------------------------------------------Micorsoft|hotmail.com|1Thanks!!!
View 6 Replies View RelatedWhen I run this update statement, it updates the proper badgenumbers but it only updates them to 1 when I did a count? As the data displays some of the results should be more than 1. Why did this occur?
Declare
@count int,
@Assignment varchar(100),
@fullname varchar(100),
@timeworkedtoday decimal(18,2),
@badgeNum varchar(50),
@ticket varchar(50)
[Code] ....
Hello,
I am trying to read in from a csv file which works like this:
DECLARE @doesExist INT
DECLARE @fileName VARCHAR(200)
SET @fileName = 'c:file.csv'
SET NOCOUNT ON
EXEC xp_fileexist "' + @fileName + '", @doesExist OUTPUT
SET NOCOUNT OFF
IF @doesExist = 1
BEGIN
BULK INSERT OrdersBulk
FROM "' + @fileName + '"
WITH
(
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)
END
ELSE
print('Error cant find file')
What I want to do is check another table before each line inserts, if the data already exists I want to do an UPDATE.
I think i can do what i need with a cursor but I think the bulk update just pushes all the data up and will not allow me to put in the cursor.
So is there a way i can read the csv in a cursor instead of using the bulk insert so i can examine each row?
UPDATE SCORESET QUAL_SCORE = ((SCORE - average_score)/deviation_score)*(-0.25) +((accuracy_score - accuracy_average_score)/accuracy_deviation_score)*0.25))WHERE SCORES.DISABLEMENT_ZIP = v_disablement_zipAND SCORES.EQPMNT_CODE = v_eqpmnt_code;
is it possible to use this one query to update the QUAL_SCORE field without using cursor.if SCORE and deviation_score are 0, Then (SCORE - average_score)/deviation_score)*(-0.25) is 0,if accuracy_score and accuracy_deviation_score are 0, then (accuracy_score - accuracy_average_score)/accuracy_deviation_score)*0.25 is 0.
Thanks
I am importing a text file that list invoice columns. The invoice detail table needs the line items to be listed with sequential numbers. I import the file to a temp table to do the work in and I know I need to have the cursor do loop through and count, however, I have no more hair to pull out.
The table looks something like this.
inv# SKU
1001 ABC123
1001 DEF456
1001 GHI789
1002 123DEF
1002 456GHI
1002 876HGT
I need the cursor to go through and number each line, something like this.
inv# SKU Line#
1001 ABC123 1
1001 DEF456 2
1001 GHI789 3
1002 123DEF 1
1002 456GHI 2
1002 876HGT 3
Any help is greatly appriciated.
Thanks
I have table A
|account | Unmort |
| A |10.000.000 |
and a Table B
|account| Jenis | Nominal | Unmort |Total|
-------------------------------------------
| A | 021 | 200.000| - | - |
| A | 028 | 3.200.000| - | - |
| A | 023 | 7.200.000| - | - |
how to update to be like this??
|account| Jenis |Nominal | Unmort |Total |
| A | 021 |200.000 | - |200.000 |
| A | 028 |3.200.000 | 2.800.000 |400.000 |
| A | 023 |7.200.000 | 7.200.000 | 0 |
for this type of account number jenis 021 Field Unmort Fill set= 0 and Field Total must not be a minus...
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
           for select name, salary from ag
 open ll
            fetch from ll
Â
             while @@FETCH_STATUS=0
              fetch from ll
               update ag set salary=200 where 1=1
Â
  close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies View RelatedI'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for
select systudentid from satrans
declare @id int
open Q
fetch next from Q into @id
while @@fetch_status = 0
begin
declare c cursor for
Select
b.ssn,
SaTrans.SyStudentID,
satrans.date,
satrans.type,
SaTrans.SyCampusID,
Amount = Case SaTrans.Type
When 'P' Then SaTrans.Amount * -1
When 'C' Then SaTrans.Amount * -1
Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
and satrans.systudentid = @id
declare @arbalance money, @type varchar, @ssn varchar, @amount money, @systudentid int, @transdate datetime, @sycampusid int, @before money
set @arbalance = 0
open c
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
while @@fetch_status = 0
begin
set @arbalance = @arbalance + @amount
set @before = @arbalance -@amount
insert c2000_utility1..tempbalhistory1
select @systudentid systudentid, @sycampusid sycampusid, @transdate transdate, @amount amount, @type type, @arbalance Arbalance, @before BeforeBalance
where( convert (int,@amount) <= -50
or @amount * -1 > @before * .02)
and @type = 'P'
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
end
close c
deallocate c
fetch next from Q into @id
end
close Q
deallocate Q
select * from c2000_utility1..tempbalhistory1
truncate table c2000_utility1..tempbalhistory1
I having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
View 1 Replies View RelatedWhat's up with this?
This takes like 0 secs to complete:
update xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
but From linked server this takes 8 minutes????!!!??!:
update [xxx_servername_xxxx].xxx_DatabaseName_xxx.dbo.xxx_TableName_xxx
set d_50 = 'DE',modify_timestamp = getdate(),modified_by = 1159
where enc_id in
('C24E6640-D2CC-45C6-8C74-74F6466FA262',
'762E6B26-AE4A-4FDB-A6FB-77B4782566C3',
'D7FBD152-F7AE-449C-A875-C85B5F6BB462')
What settings or whatever would cause this to take so much longer from the linked server?
Edit:
Note) Other queries from the linked server do not have this behavior. From the stored procedure where we have examined how long each query/update takes... this particular query is the culprit for the time eating. I thought it was to do specefically with this table. However as stated when a query window is opened directly onto that server the update takes no time at all.
2nd Edit:
Could it be to do with this linked server setting?
Collation Compatible
right now it is set to false? I also asked this question in a message below, but figured I should put it up here.
I am hoping someone can shed light on this odd behavior I am seeing running a simple UPDATE statement on a table in SQL Server 2000. I have 2 tables - call them Table1 and Table2 for now (among many) that need to have certain columns updated as part of a single transaction process. Each of the tables has many columns. I have purposely limited the target column for updating to only ONE of the columns in trying to isolate the issue. In one case the UPDATE runs fine against Table1... at runtime in code and as a manual query when run in QueryAnalyzer or in the Query window of SSManagementStudio - either way it works fine.
However, when I run the UPDATE statement against Table2 - at runtime I get rowsaffected = 0 which of course forces the code to throw an Exception (logically). When I take out the SQL stmt and run it manually in Query Analyzer, it runs BUT this is the output seen in the results pane...
(0 row(s) affected)
(1 row(s) affected)
How does on get 2 answers for one query like this...I have never seen such behavior and it is a real frustration ... makes no sense. There is only ONE row in the table that contains the key field passed in and it is the same key field value on the other table Table1 where the SQL returns only ONE message (the one you expect)
(1 row(s) affected)
If anyone has any ideas where to look next, I'd appreciate it.
Thanks
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies View RelatedThe Folowing code is not working anymore. (500 error)
Set objRS = strSQL1.Execute
strSQL1 = "SELECT * FROM BannerRotor where BannerID=" & cstr(BannerID)
objRS.Open strSQL1, objConn , 2 , 3 , adCmdText
If not (objRS.BOF and objRS.EOF) Then
objRS.Fields("Exposures").Value =objRS.Fields("Exposures").Value + 1
objRS.update
End If
objRS.Close
The .execute Method works fine
strSQL1 = "UPDATE BannerRotor SET Exposures=Exposures+1 WHERE BannerID=" & cstr(BannerID)
objConn.Execute strSQL1
W2003 + IIS6.0
Pls advice?
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
hi need help how to send an email from database mail on row update
from stored PROCEDURE multi update
but i need to send a personal email evry employee get an email on row update
like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i update like this
Code Snippet
:
DECLARE @id nvarchar(1000)
set @id= '16703, 16704, 16757, 16924, 17041, 17077, 17084, 17103, 17129, 17134, 17186, 17190, 17203, 17205, 17289, 17294, 17295, 17296, 17309, 17316, 17317, 17322, 17325, 17337, 17338, 17339, 17348, 17349, 17350, 17357, 17360, 17361, 17362, 17366, 17367, 17370, 17372, 17373, 17374, 17377, 17380, 17382, 17383, 17385, 17386, 17391, 17392, 17393, 17394, 17395, 17396, 17397, 17398, 17400, 17401, 17402, 17407, 17408, 17409, 17410, 17411, 17412, 17413, 17414, 17415, 17417, 17418, 17419, 17420, 17422, 17423, 17424, 17425, 17426, 17427, 17428, 17430, 17431, 17432, 17442, 17443, 17444, 17447, 17448, 17449, 17450, 17451'
UPDATE s SET fld5 = 2
FROM Snha s
JOIN dbo.udf_SplitList(@id, ',') split
ON split.value = s.na
WHERE fld5 = 3
now
how to send an EMAIL for evry ROW update but "personal email" to the employee
Code Snippet
DECLARE @xml NVARCHAR(MAX)DECLARE @body NVARCHAR(MAX)
SET @xml =CAST(( SELECT
FirstName AS 'td','',
LastName AS 'td','' ,
SET @body = @body + @xml +'</table></body></html>'
EXEC msdb.dbo.sp_send_dbmail
@recipients =''
@copy_recipients='www@iec.com',
@body = @body,
@body_format ='HTML',
@subject ='test',
@profile_name ='bob'
END
ELSE
print 'no email today'
TNX
Hello,I am trying to update records in my database from excel data using vbaeditor within excel.In order to launch a query, I use SQL langage in ADO as follwing:------------------------------------------------------------Dim adoConn As ADODB.ConnectionDim adoRs As ADODB.RecordsetDim sConn As StringDim sSql As StringDim sOutput As StringsConn = "DSN=MS Access Database;" & _"DBQ=MyDatabasePath;" & _"DefaultDir=MyPathDirectory;" & _"DriverId=25;FIL=MS Access;MaxBufferSize=2048;PageTimeout=5;" &_"PWD=xxxxxx;UID=admin;"ID, A, B C.. are my table fieldssSql = "SELECT ID, `A`, B, `C being a date`, D, E, `F`, `H`, I, J,`K`, L" & _" FROM MyTblName" & _" WHERE (`A`='MyA')" & _" AND (`C`>{ts '" & Format(Date, "yyyy-mm-dd hh:mm:ss") & "'})"& _" ORDER BY `C` DESC"Set adoConn = New ADODB.ConnectionadoConn.Open sConnSet adoRs = New ADODB.RecordsetadoRs.Open Source:=sSql, _ActiveConnection:=adoConnadoRs.MoveFirstSheets("Sheet1").Range("a2").CopyFromRecordset adoRsSet adoRs = NothingSet adoConn = Nothing---------------------------------------------------------------Does Anyone know How I can use the UPDATE, DELETE INSERT SQL statementsin this environement? Copying SQL statements from access does not workas I would have to reference Access Object in my project which I do notwant if I can avoid. Ideally I would like to use only ADO system andSQL approach.Thank you very muchNono
View 1 Replies View RelatedIt appears to update only the first qualifying row. The trace shows a row count of one when there are multiple qualifying rows in the table. This problem does not exist in JDBC 2000.
View 5 Replies View RelatedI hope this is the appropriate forum for this question, if not then I apologize.
I've got a SQL Server 2000 stored procedure that returns data to be used in a crystal report in Visual Studio 2005. Most of the stored procedure works well, but there is a point where I need to calculate an average number of days been a group of date pairs.
I'm not familiar with cursors, but I think that I will need to use one to achieve the result I am looking for so I came up with the code below which is a snippet from my stored procedure. In this part of the code, the sp looks at the temporary table #lmreport (which holds all of the data that is returned at the end to crystal) and for every row in the table where the terrid is 'T' (the territory is domestic), it selects all of those territories from the territory table and loops through them to determine the date averages (by calling a nested stored procedure, also included below) for each territory and then updates #lmreport with that data.
When I try to run the stored procedure, I get "The column prefix '#lmreport' does not match with a table name or alias name used in the query." on the line indicated.
Does anyone have any idea what might be wrong or if this will even work the way I need it to?
Thank you in advance.
Hi,
Declare wh_ctry_id CURSOR FOR
Is "cursor for" is a function or datatype or what is this?
Regards
Abdul
I need some help with the concept of a Cursor, as I see it being used in a stored procedure I need to maintain.
Here is some code from the stored proc. Can someone tell me what is going on here. I haveleft out some of the sql, but have isolated the Cursor stuff.
Open MarketCursor -- How is MarketCursor loaded with data ?
FETCH NEXT
FROM MarketCursorINTO ItemID, @Item, @Reguest
WHILE @@FETCH_STATUS = 0BEGIN
DEALLOCATE MarketCursor