Update Dataadapter With Text Box Value
Sep 16, 2004
hi
this is probably a piece of pie to fix but i be having some problems......
i have this peice of code to update the sql dataapadapter
Dstest1.Tables("test").Rows(0)("hello") = Me.textboxhello.Text
SqlDataAdapter1.Update(Dstest1, "test")
this does not work, it does work however if i replace the Me.textboxhello.Text
with a value in quotation marks or with another text box not linked to that feild in the table... it does not work with the relevant text box!!!!!!!!
thanks for all your help
cq
View 1 Replies
ADVERTISEMENT
Sep 25, 2007
Hi, I am populating a datagrid with data from one sql table, I add additional columns and then wish to write it back out to another table. I have written the following code to acheive this, however it keeps throwing the follwing exception - "Update requites a valid UpdateComman when passed a DataRow collection with modified rows"
I've looked and I can see what the problem is, can anybody help please?
Private Sub FillData()
'SQL connection
Me.sqlconnection = New System.Data.SqlClient.SqlConnection
Me.sqlconnection.ConnectionString = ConfigurationSettings.AppSettings("CuroConnection")
Dim sql As String
If Request("action") = "gen" Then
sql = "select item from tblPickList where GroupName = 'xxx'AND Category = '" & Category2 & "' ORDER BY item ASC"
ElseIf Request("action") = "fav" Then
sql = "select identifiertext as item from tblfavourites where HRID = " & Session("hrid") & " and type = 3 ORDER BY identifiertext ASC"
ElseIf Request("action") = "spec" Then
sql = "select item from tblPickList where GroupName = '" & GroupID & "' AND Category = '" & Category2 & "' ORDER BY item ASC"
End If
ds = New DataSet
da = New SqlClient.SqlDataAdapter(sql, sqlconnection)
Try
sqlconnection.Open()
da.Fill(ds, "tblPickListTemp")
sqlconnection.Close()
Catch ex As Exception
sqlconnection.Close()
End Try
ds.Tables(0).Columns.Add("HRID")
ds.Tables(0).Columns.Add("Flag")
'may possibly add a favourites column here at a later date to ensure no duplication
Dim dr As DataRow
For Each dr In ds.Tables("tblPickListTemp").Rows
dr("HRID") = Session("hrid")
dr("Flag") = 0
Next
DgrdFavourites.DataSource = ds
DgrdFavourites.DataBind()
End Sub
Public Sub CreateTempRecords()
'SQL connection
Me.sqlconnection = New System.Data.SqlClient.SqlConnection
Me.sqlcommand = New System.Data.SqlClient.SqlCommand
Me.da = New SqlClient.SqlDataAdapter
Me.sqlconnection.ConnectionString = ConfigurationSettings.AppSettings("CuroConnection")
Dim sql As String
sql = "Insert into tblPickListTemp (Item, HRID, Flag) values (@Item, @HRID, @Flag)"
sqlcommand.CommandText = sql
sqlcommand.Connection = sqlconnection
sqlcommand.Parameters.Add("@Item", "Item")
sqlcommand.Parameters.Add("@HRID", "HRID")
sqlcommand.Parameters.Add("@Flag", "Flag")
da.InsertCommand = sqlcommand
da.Update(ds.Tables(0))
End Sub
View 10 Replies
View Related
May 18, 2007
Hy, again! I am at the begining of an application. I have some modules that insert, delete and update only one row at one table. My question is should I use dataadapter.Update() or ExecuteNonQuery(). I prefer ExecuteNonQuery because I want to build a class : DataLayer to implement my own InsertProcedure(), UpdateProcedure(),DeleteProcedure(). I want speed in my application, so which is the best: dataadapter.Update() OR ExecuteNonQuery(). Thank you!
View 5 Replies
View Related
Jul 13, 2004
I am having trouble getting an Update call to actually update records. The select statement is a stored procedure which is uses inner joins to link to property tables. The update, insert, and delete commands were generated by Visual Studio and only affect the primary table. So, to provide a simple example, I have a customer table with UID, Name, and LanguageID and a seperate table with LanguageID and LanguageDescription. The stored procedure can be used to populate a datagrid with all results (this works). The stored procedure also populates an edit page with one UID (this works). After the edit is completed, I attempt to update the dataset, which only has one row at this time, which shows that it has been modified. The Update modifies 0 rows and raises no exceptions. Is this because the update, insert, and delete statements do not match up one-to-one with the dataset? If so, what are my choices?
View 1 Replies
View Related
Feb 5, 2005
Hi,
I'm using DataAdapter.Update() to update data in a table. My question is; how do I create a trigger that works after the update has completely finished?
For example if my update adds 50 new rows to a table the trigger I've currently got fires after each new row that is added ie 50 times in total. Is it possible to get it to trigger after the last (ie 50th) row is added???
Thanks
View 2 Replies
View Related
Nov 30, 2006
Hi,
I am trying to use DataAdapter.Update to save a file stream into SQl Express.
I have a dialog box that lets user select the file:
openFileDialog1.ShowDialog();
I want to put
openFileDialog1.OpenFile();
Into
this.documentTableAdapter.Update(this.docControllerAlphaDBDataSet.Document.DocumentColumn);
I am thinking that it might just be some syntax issue, but I looked online, and didn't find much answers.
Thanks,
Ke
View 1 Replies
View Related
May 2, 2008
Hi!
I am trying to insert data into 2 different tables. I am using dataadapter and dataset.
Protected Sub SubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitButton.Click
Call ConnectionString()
Dim insertSQL As New SqlCommand()
insertSQL.Connection = sqlConn
insertSQL.CommandText = "SELECT location.CountryName, location.CityName, location.BuildingName, location.FloorID, rooms.name, rooms.FloorID AS Expr1 FROM location INNER JOIN floors ON location.FloorID = floors.id INNER JOIN rooms ON floors.id = rooms.FloorID"
Dim ds As New DataSet()
Dim da As New SqlDataAdapter()
da.SelectCommand = insertSQL
Dim scb As New SqlCommandBuilder(da)
Try
da.Fill(ds)
Dim ndr = ds.Tables("location").NewRow
Dim ndr2 = ds.Tables("rooms").NewRow
ndr("FloorID") = FloorIDDDL.SelectedValue
ndr("CountryName") = CountryNameTextBox.Text
ndr("CityName") = CityNameTextBox.Text
ndr("BuildingName") = BuildingNameTextBox.Text
ndr2("name") = RoomNameTextBox.Text
ndr2("FloorID") = FloorIDDDL.SelectedValue
ds.Tables("location").Rows.Add(ndr)
ds.Tables("room").Rows.Add(ndr2)
da.Update(ds)
ErrMsgLbl.Text = "Information saved successfully"
Catch ex As Exception
ErrMsgLbl.Text = ex.ToString
End Try
sqlConn.Close()
End Sub
The above code does not throw any error. It also does not update the tables.
Your help will be appreciated.
Thanks!
View 5 Replies
View Related
Jan 18, 2008
My DataAdapter.Update() Method is running this query against my database and all the parameters and the formatting looks correct to me. I was wondering if anyone could identify obvious errors.... Thanks!
exec sp_executesql
N'NewUpdateCommand',
N'@Name nvarchar(50),
@PriContactFName nvarchar(50),
@PriContactLName nvarchar(50),
@PriContactWork nvarchar(20),
@PriContactFax nvarchar(20),
@PriContactCell nvarchar(20),
@PriContactEmail nvarchar(50),
@MainOfficeLocationAddr1 nvarchar(50),
@MainOfficeLocationAddr2 nvarchar(50),
@MainOfficeLocationCity nvarchar(50),
@MainOfficeLocationState nvarchar(50),
@MainOfficeLocationZip nvarchar(15),
@Description nvarchar(50),
@Original_ClientID int,
@ClientID int',
@Name=N'Brinker International',
@PriContactFName=N'Steves',
@PriContactLName=N'Maubley',
@PriContactWork=N'913-876-9876',
@PriContactFax=N'913-098-8765',
@PriContactCell=N'913-987-7654',
@PriContactEmail=N'a@b.c',
@MainOfficeLocationAddr1=N'1234 Burkwood',
@MainOfficeLocationAddr2=NULL,
@MainOfficeLocationCity=N'Tallahassee',
@MainOfficeLocationState=N'Florida',
@MainOfficeLocationZip=N'99111',
@Description=N'This is a good client.',
@Original_ClientID=1,
@ClientID=1
Msg 102, Level 15, State 1, Line 15
Incorrect syntax near 'NewUpdateCommand'.
View 1 Replies
View Related
Feb 28, 2007
Hi, What is the difference b/w sqldatareader and sqldataadapter? For what purpose are they used in a database connection & how do they differ from each other? Pls explain me in detail.Regards Vijay.
View 1 Replies
View Related
Oct 11, 2006
Why DataAdapter does NOT load relations from DB ?the relations are made using SQL SERVER MANAGEMENTbut when a fill a datatable using dataadapter the relations are not loaded .why ? what is the solution to this problem ?
View 1 Replies
View Related
May 17, 2007
Hi i'm a new to ASP.NET and for some reason when i click the Next button in the code below, the pageIndex does not change. Please assist, Basically what i'm trying to do is to use DataAdapter.fill but passing in the start index and the number of records to pull from the dataset table.
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.OleDb;
public partial class Home : System.Web.UI.Page
{
//ConnectionOleDbConnection dbConn;
//discount that can be change by user using a gui interface
//CurrentPageint pageIndex = 0;double discount = 0.15 ;
protected void Page_Load(object sender, EventArgs e)
{
// homeGridView.Visible = true;
BindList();
}protected string getSpecial(string price,object sale)
{String special = "";if (sale.ToString().CompareTo("True") == 0)
{special = String.Format("{0:C}",double.Parse(price) * (1-discount));
}return special;
}
protected void BindList()
{
//Creating an object for the 'PagedDataSource' for holding the data.
//PagedDataSource objPage = new PagedDataSource();
try
{
//open connection
openConnection();
//sql commandstring columns = "*";
string SqlCommand = "Select " + columns + " from Books";
//create adapters and DataSetOleDbDataAdapter myAdapter = new OleDbDataAdapter(SqlCommand, dbConn);DataSet ds = new DataSet("bSet");
//create tableDataTable dt = new DataTable("Books");myAdapter.Fill(ds, pageIndex, 9, "Books");
Response.Write("Page Index: "+pageIndex);
//create table data viewDataView dv = new DataView(ds.Tables["bTable"]);
booksDataList.DataSource = ds;
booksDataList.DataBind();
myAdapter.Dispose();
dbConn.Close();
}catch (Exception ex)
{
Response.Write("Exception thrown in BindList()");
dbConn.Close();throw ex;
}
}
public void openConnection()
{string provider="Microsoft.Jet.OLEDB.4.0";
string dataSource = "C:/Documents and Settings/Owner/My Documents/Visual Studio 2005/WebSites/E-BookOnline/App_Data/BooksDB.mdb";dbConn = new OleDbConnection("Provider =" + provider + ";" + "Data Source =" + dataSource);
dbConn.Open();
}protected void nextClick(object sender, EventArgs e)
{
pageIndex=pageIndex+1;Response.Write("In nextClick"+pageIndex);
BindList();
}protected void prevClick(object sender, EventArgs e)
{if (pageIndex > 0)
{
pageIndex=pageIndex-1;
BindList();
}
}
}
View 1 Replies
View Related
Aug 14, 2007
I have done some reading on the dataadapter class, but do not have a good handle on how to work with dataadapter after it has been filled by a dataset. For instance, should I use an if statement such as this to update the value in the dataadapter? if (dsSunbelt.Tables[0].Columns[39].Equals("")) { DataRow drUpdate = dsSunbelt.Tables[0].Columns[39].Equals(DateTime.Now); } I am sure it is not hard to see what I am doing, and I hope that I am missing something small, but how do I isolate a dataadapter value to update in the corresponding database?
View 2 Replies
View Related
Jan 31, 2008
I'm reading XML data into a DataTable that is populated into a datagrid. From here I need to update database and wanted to know how to Fill a DATA ADAPTER with a DATA TABLE?
I'm familiar with updating using a SQL command, but in this case, i have the dataTable already created from XML.
Please help.
Thanks,
View 3 Replies
View Related
Apr 11, 2006
i have this code :
if(! IsPostBack)
{
string strConnection = "server=localhost; uid=sa;
pwd=sasasa; database=northwind";
string strCommand = "Select * from Customers";
SqlDataAdapter dataAdapter = new
SqlDataAdapter(strCommand, strConnection);
DataSet dataset = new DataSet();
dataAdapter.Fill(dataset, "Products");
SqlCommandBuilder bldr = new
SqlCommandBuilder(dataAdapter);
DataTable dataTable = dataset.Tables[0];
dgCustomer.DataSource = dataTable;
dgCustomer.DataBind();
}
when i run this code, error like this appear :
Server Error in '/Registeration' Application.
SQL Server does not exist or access denied. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: SQL Server does not exist or access
denied.Source Error:
Line 41: DataSet dataset = new DataSet();Line 42: Line 43: dataAdapter.Fill(dataset, "Products");Line 44: SqlCommandBuilder bldr = new SqlCommandBuilder(dataAdapter);Line 45: Source File:
e:asp.net
egisteration
egister.aspx.cs Line: 43
Stack Trace:
[SqlException: SQL Server does not exist or access denied.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) Registeration.WebForm1.Page_Load(Object sender, EventArgs e) in e:asp.net
egisteration
egister.aspx.cs:43 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573;
ASP.NET Version:1.1.4322.573
how can i solve this problem??? thank you...
View 1 Replies
View Related
Apr 11, 2006
i have this code :
private void Page_Load(object sender, ....)
{
if(! IsPostBack)
{
string strConnection = "server=localhost; uid=sa;
pwd=**secret**; database=northwind";
string strCommand = "Select * from Customers";
SqlDataAdapter dataAdapter = new
SqlDataAdapter(strCommand, strConnection);
DataSet dataset = new DataSet();
dataAdapter.Fill(dataset, "Products");
SqlCommandBuilder bldr = new
SqlCommandBuilder(dataAdapter);
DataTable dataTable = dataset.Tables[0];
dgCustomer.DataSource = dataTable;
dgCustomer.DataBind();
}
}
when i run this code, error like this appear :
Server Error in '/Registeration' Application.
SQL Server does not exist or access denied. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: SQL Server does not exist or access
denied.Source Error:
Line 41: DataSet dataset = new DataSet();Line 42: Line 43: dataAdapter.Fill(dataset, "Products");Line 44: SqlCommandBuilder bldr = new SqlCommandBuilder(dataAdapter);Line 45: Source File:
e:asp.net
egisteration
egister.aspx.cs Line: 43
Stack Trace:
[SqlException: SQL Server does not exist or access denied.] System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) System.Data.SqlClient.SqlConnection.Open() System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) Registeration.WebForm1.Page_Load(Object sender, EventArgs e) in e:asp.net
egisteration
egister.aspx.cs:43 System.Web.UI.Control.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive() System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573;
ASP.NET Version:1.1.4322.573
how can i solve this problem??? thank you...
View 1 Replies
View Related
May 7, 2007
Good day,
I just like to ask if anybody has experienced getting empty rows from SQL data adapter? I'm using SQL Server 2005. Problem is when the sql is run on Query Analyzer it retrieves a number of rows but when used in my application it returns 0 or empty rows.
I thought the connection is not the problem since I got my columns right. Below is my code snippet.
Thanks!
const string COMMAND_TEXT = @"select distinct somefield as matchcode, count(somefield) "
+ "as recordcount from filteredaccount where StateCode = 0 group by somefield having count(somefield) > 1";
SqlDataAdapter adapter = new SqlDataAdapter(COMMAND_TEXT, connection);
DataTable dt = new DataTable(sometablename);
adapter.Fill(dt);
View 13 Replies
View Related
Jan 28, 2008
For some reason I've had trouble with this today... can anyone provide me with a generic code snippet that programatically allows me to select data from a database limited by a parameter and then fills a datatable?
View 4 Replies
View Related
May 8, 2006
hi friends,
i look forward an answer that solves my problem.
iam trying too populate a DropDown list . here is the codings. Previously it was working. suddenly,
it s generating error.
strConnectionString = "Provider = SQLOLEDB;Integrated Security=False; User ID=sa;Password=;Data Source=GIREESH-AC720F7;Initial Catalog=NorthWind"
in page_load event
dim sql as string
sql = "select AthleteNameKey from athletes"
result_adap = DbAccess.ExecuteAdaP(sql)
result_adap.Fill(result_ds, "athletes")
cboAthleteName.DataSource = "athletes"
cboAthleteName.DataTextField = "AthleteNameKey"
cboAthleteName.DataValueField = "AthleteNameKey"
cboAthleteName.DataBind()
Public Function ExecuteAdaP(ByVal sqls As String) As OleDbDataAdapter
'Dim ds As New OleDbDataAdapter
Dim da As New OleDbDataAdapter(sqls, strConnectionString)
'da.Fill(ds)
Return da
End Function
View 1 Replies
View Related
Oct 7, 2004
I'm using DataList to return vales stored in an SQL database, of which one of the fields contains the date the record was added.
I am trying to fill the dataset with items only from the last 30 days.
I've tried a few different ways, but all the database rows are returned.
What is the WHERE clause I sholud use to do this??
Thanks
View 2 Replies
View Related
Apr 8, 2008
I am reading multiple databases into a single dataset, putting each read into a new datatable in the set. Ultimately, I want to merge the multiple tables (they are all from different DB tables in different locations using the same schema). I am also combining this with data from an Oracle database which is in yet another table in the same dataset.
Here is my question:
I will not be propagating any changes to this data back to its original source, but I will be populating it out to Active Directory. (Don't worry; I'm not asking any AD questions here.) But I do want to run SELECT, DELETE, and UPDATE queries against the data in the dataset in memory without writing it out to a separate file. Based on that type of usage, would I be better to use a DataReader or a DataAdapter to do the read from the original database? If I use a DataReader, can I still update the data in memory? In either case, what's the correct methodology to update data in a dataset in memory?
Thanks!
View 3 Replies
View Related
May 22, 2008
My task is to bind and show 3 different values coming from three different queries into three different columns of GridView. I had done this as mention in below. Program was successful. But I want to excute these three queries in same Stored Procedure. I can do that and stored in seperated variables. I need help how to call these three different values in data adapters and store each value in three different columns of grid view.
Simply I want to below statement in stored procedures and call from program. Can any one help me plz.
con = DataBaseConnection.GetConnection();
DataSet ds = new DataSet();
SqlDataAdapter da = new SqlDataAdapter("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
da.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da.Fill(ds,"Dep");
SqlDataAdapter da1 = new SqlDataAdapter("select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID", con);
da1.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da1.Fill(ds,"Exp");
SqlDataAdapter da2 = new SqlDataAdapter("select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID", con);
da2.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = Convert.ToInt32(Session["PA_UID"]);
da2.Fill(ds,"Inc");
string deposits = Convert.ToString(ds.Tables["Dep"].Rows[0].ItemArray[0]);
string expenses = Convert.ToString(ds.Tables["Exp"].Rows[0].ItemArray[0]);
string income = Convert.ToString(ds.Tables["Inc"].Rows[0].ItemArray[0]);
GridView1.DataSource = ds;
GridView1.DataBind();
GridView1.Rows[0].Cells[0].Text = "Total";
GridView1.Rows[0].Cells[1].Text = deposits
GridView1.Rows[0].Cells[2].Text = expenses;
GridView1.Rows[0].Cells[3].Text = income;
//The above program was success.
// This is another way I had tried. But failed. I am getting Index out of bound error. Can any solve this if possible to u.
SqlCommand cmd = new SqlCommand("select isnull(sum(PA_DAmt),0) from PA_Deposits where PA_UID = @PA_UID", con);
cmd.Parameters.Add("@PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
GridView1.Rows[0].Cells[1].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_EAmt),0) from PA_Expenses where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[2].Text = cmd.ExecuteScalar().ToString();
cmd.CommandText = "select isnull(sum(PA_IAmt),0) from PA_Income where PA_UID = @PA_UID";
GridView1.Rows[0].Cells[3].Text = cmd.ExecuteScalar().ToString();
ASPX Code for Grid View
<h2>Account Summary</h2><br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" emptydatatext="There are no data records to display." Width="238px" >
<Columns>
<asp:TemplateField >
<ItemTemplate>
<asp:Label ID="Label1" runat="server" Text="Total"></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField ><%--HeaderText="Deposits"--%>
<ItemTemplate>
</ItemTemplate>
<HeaderTemplate>
<a href="Deposits.aspx" >Deposits</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Expenses.aspx">Expenses</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField >
<HeaderTemplate>
<a href="Income.aspx">Income</a>
</HeaderTemplate>
<ItemStyle HorizontalAlign="Center" />
<ItemTemplate>
<%-- <%# Eval("Course") %>--%>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
Plz solve this.
View 4 Replies
View Related
Aug 27, 2003
Hello All,
I would like to update some values in my table that have this value: XXXX-XXXX. I would like to update the '-' and change it to a '_'. Does anyone know the best way to do this?
I tried this but I get a "Subquery returned more than 1 value error"
UPDATE PS_MTCH_RULES
SET MATCH_RULE_ID = (SELECT SUBSTRING (MATCH_RULE_ID,1,4)+'_'+SUBSTRING(MATCH_RULE_ID,6, 4) FROM PS_MTCH_RULES WHERE MATCH_RULES_ID <> 'ERS')
Any assistance would be appreciated.
Thank you.
E David Ramos
View 1 Replies
View Related
Sep 8, 2004
Hi all,
I have a table with millions of records, table has three fields: case_id,line_no and notedata field, notedata field is 60 chars long, datatype varchar.for each case_id there could be as many as 2000 line_no meaning 2000 notes. I need to compress these notes into one note by case_no, For example case_no 1 could have 2000 lines of notes but my comressed table shoul have only one line containing all 2000 notes in line_no sequence.
my compressed table contains two fields case_no and notetext, notetext is a text field.
here is the script I am trying to use to accomplish the task but it does not append more than 8000 chars in one case, so my notes are chopping of, how should I do this, please let me know of any suggestions..
Thanks.
truncate table eldoecinotescompressed
insert into eldoecinotescompressed (app_code, case_no)
select distinct app_code, substring(system_key, 6,8)
from eldoecinotes
DECLARE @case VARCHAR(20);
DECLARE @note VARCHAR(80);
DECLARE @lineno VARCHAR(5);
DECLARE notes_cursor CURSOR FOR
select substring(system_key, 6,8) case_no, line_no, rtrim(notedata) notedata FROM EldoECINotes
where substring(system_key, 6,8)<>''
order by 1,2;
OPEN notes_cursor;
FETCH NEXT FROM notes_cursor into @case, @lineno, @note;
WHILE (@@FETCH_STATUS = 0)
BEGIN
BEGIN TRANSACTION;
update eldoecinotescompressed
set notetext =
(case when isnull(datalength(notetext), 0) >= 0 then
substring(isnull(notetext,''), 1, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 8000 then
substring(isnull(notetext,''), 8001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 16000 then
substring(isnull(notetext,''), 16001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 24000 then
substring(isnull(notetext,''), 24001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 32000 then
substring(isnull(notetext,''), 32001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 40000 then
substring(isnull(notetext,''), 40001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 48000 then
substring(isnull(notetext,''), 48001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 56000 then
substring(isnull(notetext,''), 56001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 64000 then
substring(isnull(notetext,''), 64001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 72000 then
substring(isnull(notetext,''), 72001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 80000 then
substring(isnull(notetext,''), 80001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 88000 then
substring(isnull(notetext,''), 88001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 96000 then
substring(isnull(notetext,''), 96001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 104000 then
substring(isnull(notetext,''), 104001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 112000 then
substring(isnull(notetext,''), 112001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 120000 then
substring(isnull(notetext,''), 120001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 128000 then
substring(isnull(notetext,''), 128001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 136000 then
substring(isnull(notetext,''), 136001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 144000 then
substring(isnull(notetext,''), 144001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 152000 then
substring(isnull(notetext,''), 152001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 0 then
char(13) + char(10)
else '' end) +
isnull(@note,'')
where case_no=@case;
commit;
FETCH NEXT FROM notes_cursor into @case, @lineno, @note;
END
CLOSE notes_cursor;
DEALLOCATE notes_cursor;
View 3 Replies
View Related
Feb 19, 2004
First i use openxml to get my data to update the other server with webservices.
my prob is that i cant update text Fields because i got an error
================
OLE DB provider 'OpenXML' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'OpenXML' IRowset::RestartPosition returned 0x80004005: The provider did not give any information about the error.].
================
what would be my best shot here...
thanx
=======================================
XEC sp_xml_preparedocument @handle OUTPUT, @data
begin transaction
SELECT * FROM TblEvenement WHERE idEvenement = 95
UPDATE TblEvenement SET
TblEvenement.idEvenement = isnull(iox.idEvenement,TblEvenement.idEvenement),
TblEvenement.sNomEvenement = isnull(iox.sNomEvenement,TblEvenement.sNomEvenement),
TblEvenement.sDescriptionCourte = isnull(iox.sDescriptionCourte,TblEvenement.sDescriptionCourte),
TblEvenement.sDescriptionLongue = isnull(iox.sDescriptionLongue,TblEvenement.sDescriptionLongue),
TblEvenement.IdTypeSalle = isnull(iox.IdTypeSalle,TblEvenement.IdTypeSalle),
/*TblEvenement.imgSalle = isnull(iox.imgSalle,TblEvenement.imgSalle),*/
TblEvenement.sNomArtiste = isnull(iox.sNomArtiste,TblEvenement.sNomArtiste),
TblEvenement.bAfficherInternet = isnull(iox.bAfficherInternet,TblEvenement.bAfficherInternet),
TblEvenement.nNbBilletLimite = isnull(iox.nNbBilletLimite,TblEvenement.nNbBilletLimite),
TblEvenement.bLivraisonCourrier = isnull(iox.bLivraisonCourrier,TblEvenement.bLivraisonCourrier),
TblEvenement.IdTypeRepresentation = isnull(iox.IdTypeRepresentation,TblEvenement.IdTypeRepresentation),
TblEvenement.sDetailInternet = isnull(iox.sDetailInternet,TblEvenement.sDetailInternet),
TblEvenement.bHistorique = isnull(iox.bHistorique,TblEvenement.bHistorique),
TblEvenement.bAdmissionGenerale = isnull(iox.bAdmissionGenerale,TblEvenement.bAdmissionGenerale),
TblEvenement.bEvenementEnVente = isnull(iox.bEvenementEnVente,TblEvenement.bEvenementEnVente),
TblEvenement.IdProducteur = isnull(iox.IdProducteur,TblEvenement.IdProducteur),
TblEvenement.bEvenementDemo = isnull(iox.bEvenementDemo,TblEvenement.bEvenementDemo),
/*TblEvenement.sLogoBOCA = isnull(iox.sLogoBOCA,TblEvenement.sLogoBOCA),*/
/*TblEvenement.sLogoLP2722 = isnull(iox.sLogoLP2722,TblEvenement.sLogoLP2722),*/
TblEvenement.sDescriptionCourte_En = isnull(iox.sDescriptionCourte_En,TblEvenement.sDescriptionCourte_En),
/*TblEvenement.sDescriptionLongue_En = isnull(iox.sDescriptionLongue_En,TblEvenement.sDescriptionLongue_En),*/
TblEvenement.sDetailInternet_En = isnull(iox.sDetailInternet_En,TblEvenement.sDetailInternet_En)
FROM OPENXML (@handle, N'//TblEvenement')
WITH
(
idEvenement int,
sNomEvenement nvarchar (100),
sDescriptionCourte nvarchar (100),
sDescriptionLongue text,
IdTypeSalle int,
imgSalle image,
sNomArtiste nvarchar (100),
bAfficherInternet bit,
nNbBilletLimite int,
bLivraisonCourrier bit,
IdTypeRepresentation int,
sDetailInternet nvarchar (100),
bHistorique bit,
bAdmissionGenerale bit,
bEvenementEnVente bit,
IdProducteur int,
bEvenementDemo bit,
sLogoBOCA text,
sLogoLP2722 text,
sDescriptionCourte_En nvarchar (100),
sDescriptionLongue_En text,
sDetailInternet_En nvarchar (100),
sNomEvenement_En nvarchar (100)
) iox
WHERE TblEvenement.idEvenement = iox.IdEvenement /*and WRITETEXT (TblEvenement.sDescriptionLongue @ptrval 'Salut')*/
SELECT * FROM TblEvenement WHERE idEvenement = 95
rollback
EXEC sp_xml_removedocument @handle
View 1 Replies
View Related
Jul 22, 2004
I would like to update a field that already has data in it and I dont' want to overwrite the existing text. Here is my existing statement
UPDATE wr SET cf_notes = " + tmp_array(24) + " WHERE wr_id = " + data_temp(0)
I would like to add cf_notes + tmp_array(24) to cf_notes. Is this possible in SQL? If so, what is the correct syntax. I have tried 6 different statements and I get a compile error on every statement.
Thanks,
SBR
View 1 Replies
View Related
Aug 29, 2006
Hello Everyone,
We receive this error with ADO.NET (on a SQL Server 2000):
The query processor could not produce a query plan from the optimizer because a query cannot update a text, ntext, or image column and a clustering key at the same time.
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at ?OnExecuteNonQuery@dtbmsq_Statement_c@@$$FUAE?AW4dtb_Result_t@@PAUdtbsql_Connection_ip@@PAH@Z(dtbmsq_Statement_c* , dtbsql_Connection_ip* Connection, Int32* NbRowsAffected) in s:ogl20061srcodbmsqdtbmsqdtbmsq_statement_c.cpp:line 598
N.B. The update concerned only update one row.
Is it a known restriction? Is it a restriction from ADO.NET or from the database server?
Is it documented somewhere?
Regards.
Carl
View 6 Replies
View Related
Sep 27, 2007
Good Morning Folks,
Pretty new to Mysql, and have a query that if anyone can help me with id be very grateful!!
I am using the UPDATE command and wish to copy a columns data to another column, but the first column contains text then (text in a bracket) i wish to copy everything from the first column except whats in the bracket to column 2???
example...
UPDATE table_name SET `field1` = `field2`...............???
Any ideas??
Many Thanks
View 3 Replies
View Related
Dec 15, 2003
I tryed to update tables part of my MSDE database, using the SqlDataAdapter.Update() method. It worked fine untill I tryed to update a table that has a Column with the Text SQL DataType. It didn't work. The error was :
"The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator."
Is there a way to do it ?
Thanks,
Jeff
View 4 Replies
View Related
Jan 17, 2005
First I recieve this error when I upload a photo and click on the save button.
'ODBC - update on a linked table 'PersonMisc' failed.'
Then this error appears after I click ok.
[Microsoft][ODBC SQL Server Driver][SQL Server] The READTEXT and WRITETEXT statements cannot be used with views[#285][Microsoft][ODBC SQL Server Driver] Warning: Partial insert/update The insert/update of a text or image did not succeed.[#0].
Is there a size limit on the pictures I am uploading?
View 2 Replies
View Related
Mar 16, 2015
I am trying my first bulk update to an existing SWL table from a CSV text file,The text file naming is exacrtly the same as the SQL table, with the same attributes
The statements:
BULK INSERT [Jedox_prod].[dbo].[B_BP_Customer]
FROM 'c:Baanjedox_dailyjdcom4401.txt'
WITH
[code]....
The error message is:
[size=1Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 3 (BP_Country).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".size=1]..The have checked and re-checked the BP_Country field ( the 1st field after the key) and I am not seeing any mismatches.
View 5 Replies
View Related
Mar 17, 2015
Have installed SQL Server 2008 R2 Express (includes SSMS tool) on Windows server 2008 R2 sp1 without any issues.Database created with no issues, full text catalog created via the wizard also with no issues but cannot run the process as a scheduled task of updating the catalog because the SQL agent is not available in the express version.
The full text index information is already being populated and updated by a third party application so this leaves just the catalog to be updated as and when new full text information is available.
I have a third party SQL scheduler which will run SQL scheduled tasks but requires a script to run the full text catalog update process
Is it possible to extract a script from the existing full text catalog to run the update process or how to create a script from scratch to do the same update catalog process in the third party scheduler?
View 1 Replies
View Related
Dec 10, 2014
I need to update a large table, about 55 million rows, without filling the transaction log, in the shortest time as possible. The goal is to alter the table and change the data type for Text column from VARCHAR(7900) to NVARCHAR(MAX).
Since I cannot do it with an ALTER TABLE statement (it would fill up the transaction log) I'm thinking to:
- rename column Text in Text_OLD
- add Text column of type NVARCHAR(MAX)
- copy values in batches from Text_OLD to Text
The table is defined like:
create table DATATEXT(
rID INTEGER NOT NULL,
sID INTEGER NOT NULL,
pID INTEGER NOT NULL,
cID INTEGER NOT NULL,
err TINYINT NOT NULL,
[Code] ....
I've thought about a stored procedure doing this but how to copy values in batch from Text_OLD to Text.
The code I would start with (doing just this part) is the following, but maybe there are more efficient ways to do it, or at least there's a better way to select @startSeq in the WHILE loop (avoiding to select a bunch of 100000 sequences and later selecting the max).
declare @startSeq timestamp
declare @lastSeq timestamp
select @lastSeq = MAX(sequence) from [DATATEXT] where [Text] is null
select @startSeq = MIN(Sequence) FROM [DATATEXT] where [Text]is null
BEGIN TRANSACTION T1
WHILE @startSeq < @lastSeq
[Code] ....
View 1 Replies
View Related
Apr 25, 2007
On Sql Server 2005 Standard if I insert a new row into SomeTable that has a full-text index:
insert SomeTable(keywords)values('this is a test')
and then query:
SELECT * FROM Message WHERE Contains(keywords, ' "test" ');
I get the expected rows all rows that have "test" in the keyword.
On Sql Server 2005 Express new rows are not returned unless I rebuild the catalog.
Is this a known limitation of Express?
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CREATE TABLE [dbo].[SomeTable](
[key] [int] IDENTITY(1,1) NOT NULL,
[keywords] [nvarchar](255) NOT NULL
CONSTRAINT [PK_SomeTable] PRIMARY KEY CLUSTERED
CREATE FULLTEXT CATALOG ft AS DEFAULT;
CREATE FULLTEXT INDEX ON [dbo].[SomeTable] KEY INDEX [PK_SomeTable] ON [ft] WITH CHANGE_TRACKING AUTO
ALTER FULLTEXT INDEX ON [dbo].[SomeTable] ADD ([keywords])
ALTER FULLTEXT INDEX ON [dbo].[SomeTable] ENABLE
View 1 Replies
View Related
