I really want to update just one cell without notify the others in record ,but i can not.
example; my table like this.
ID
Increasingnumber
LastModified
1
15
1/1/1900
i want to modify the "increasingnumber" cell only and also not let "LastModify" cell being updated. Can anyone help me solve this problem?
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
I am trying to update a record in a table based off of criteria of another record in the table.
So suppose I have 2 records
ID owner type
1 5678 past due
2 5678 late
So, I want to update the type field to "collections" only if the previous record for the same record is "past due". Any ideas?
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
This should be incredibly simply but I've been working on it for quite a while and have had no luck:
There's ONE table with many columns but I'm only interested in three columns.
DistrictLEA
SSN
And a third column titled DistrictLEASSN
This is an odd scenario but I need to concatenate DistrictLEA + SSN for each record and update DistrictLEASSN with the result.
Is there a good method to do this with T-SQL/Cursors?
UPDATE DistrictLEASSN
SET DistrictLEASSN= DistrictLEA + SSN
I'd like to loop through each record in the table and perform the operation.
Thanks! -CD
hi,
i use SSB to insert records in my database. can i use SSB to update a record?
Am in a small fix. my Trigger is updating my entire table records , i don't want that, i want to update a column in the record that is updated by my application using a trigger that tracks updates on that table.
Is there a way i can track the updated record on my table and then update a field in that record through my TRIGGER?
My database is MSSQLServer2005 Enterprise Edition..
Below is my code
CREATE TRIGGER [TR_Employee]
ON [Test_1_1].[dbo].[Employee]
For UPDATE
Not For Replication
AS
BEGIN
Update Employee set Last_Changed = (select getDate())
END
Go
Yemi
To see where is the problem I am trying to count rows in the database.First I create a table A with 2 columns namely tablename, rowbefore and rowafter and I insert records in it as below.
INSERT INTO A
SELECT TableName = o.name, '', Rows = max(i.rows) FROM sysobjects o
INNER JOIN sysindexes i ON o.id = i.id
WHERE xtype = 'u' AND OBJECTPROPERTY(o.id,N'IsUserTable') = 1
GROUP BY o.name
ORDER BY o.name
Then I update rowbefore with rowafter as below.
UPDATE A SET rowbefore = rowafter
Now I launch my application with update records in the database.Then I am trying to update rowafter with new records as below.
UPDATE A
SET rowafter = (SELECT max(sysindexes.rows) FROM sysobjects
INNER JOIN sysindexes ON sysobjects.id = sysindexes.id
WHERE xtype = 'u' AND OBJECTPROPERTY(sysobjects.id,N'IsUserTable') = 1 AND A.tablename = sysobjects.name)
Does this update really update my column rowafter or not?
HI ALL,
CAN ANYBODY HELP ME TO SOLVE THE ISSUE
I WANNA UPDATE A RECORD OF ONE TABLE WITH VALUES THAT ARE PRESENT IN A COLUMN OF ANOTHER TABLE
OR
CAN I DO THE SAME USING INSERT QUERY
THANKS IN ADVANCE
Is there a way to structure a query to update an existing table record if it already exists, otherwise insert a new record into that table?
View 2 Replies View RelatedHave an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
Any new record inserted or update in source table SSIS package automatically run, how can we achieve without using service broker.
View 7 Replies View RelatedHi!
What I'd like to do is:
UPDATE table1
SET
A_TEXT_COLUMN = (SELECT another_text_column
FROM table2
WHERE table2_id = @precomputed_id_1)
WHERE table1_ID = @precomputed_id_2
Since the cells are text, this does not work. Since the cell to be updated is in an already exitant row, it's not possible to simply use insert.
I'd like to do something like (PSEUDOcode):
WRITETEXT(table1.A_TEXT_COLUMN, READTEXT(@textptr_initialised_to_point_at_target_c ell))
But the *actual* synatx of WRITETEXT and READTEXT seem totally inappropriate for any such trick...
Any hints or pointers HUGELY appreciated... THANX
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies View RelatedI have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
Hi All,
I am trying to create package something like that..
1- New Customer table as OleDB source component
2- Lookup component - checks customer id with Dimension_Customer table
3- And if same customer exist : I have to update couple fields on Dimension_Customer table
4- if it does not exist then I have insert those records to Dimension_Customer table
I am able to move error output from lookup to Dimension_Customer table using oledb destination
but How can I update the existing ones?
I have tried to use oledb command but somehow it didnt work
my sql was like this : update Dimension_Customer set per_X='Y', per_Y= &Opt(it should come from lookup)
I will be appreciated if you can help me...
HI,I HAVE AN EXCEL SHEET WITH SOME DATA, I WANT TO IMPORT THAT DATA (CELLBY CELL WITH MANIPULATION) INTO THE SQL SERVER TABLES BY USING STOREDPROCEDURE(IF POSSIBLE).IF ANYBODY HAVE DONE SIMILER TYPE OF JOB OR KNOWING ABOUT IT, PLS. LETME KNOW.THANKS IN ADV.T.S.NEGI
View 4 Replies View Related
Hi guys, may I know is it possible to create an update trigger like this ? Assuming there are two database, database A and database B and both are having same tables called 'Payments' table. I would like to update the Payments records on database A automatically after Payments records on database B had been updated. I can't use replication because both tables might having different records and some records are the same. Hope can get any assistance here, thank you.
Best Regards,
Hans
I'm looking at a system where formulas have been added into fields in a table and I need to look at the field to see what formula to use when selecting eg: eg this + this, this / this etc.Here's a basic table I have knocked up to try different things...
CREATE TABLE #HeaderOrder(
[HeaderCode] [varchar](10) NOT NULL,
[HeaderCode2] [varchar](10) NOT NULL,
[FormulaCode] [varchar](10) NOT NULL
[code]...
Hi,
I need to realize multicolumn cell in table for grouping fields, but i don't know how to do that. Help me please.
1col. 2 col. 3 col.
long text grouping field
first second third
data data data
Thank you.
Hi,
A few months back i saw a sample rds file where there was a kind of line graph in a table cell
that indicated how much percent a sales person had to the complete sale figure.
But i cannot find the link anymore.
I would like to have such a linge graph next to all my agents that indicates a value againts a total value.
Does anybody has any pointers where i could find that info ?
Greetings
Vinnie
Hello,
In my .NET.ASP application I generate a random five digit password, like so:
string password = Membership.GeneratePassword(5, 1);
The result could be a password like "0l$IE" and I the save this password to an SQL server. The problem is however that with the generated password five blanks are also added. Instead of "0l$IE" I get "0l$IE ". I hope you understand what I mean? Is there an easy way to correct this?
I appreciate any help!
hi!
I have a big problem. If anyone can help.
I want to retrieve the last update time of database. Whenever any update or delete or insert happend to my database i want to store and retrieve that time.
I know one way is that i have to make a table that will store the datetime field and system trigger / trigger that can update this field record whenever any update insert or deletion occur in database.
But i don't know exactly how to do the coding for this?
Is there any other way to do this?
can DBCC help to retrieve this info?
Please advise me how to do this.
Thanks in advance.
Vaibhav
This is embarasing.I'm creating a 500 line query from XML, CSV's, etc. and I can't fingure this out. I'm building a very complex "SELECT" query and then shoving it into the [Select] column in a SQL 2005 table. I want to call a stored procedure that just "executes" that query and returns the results....Any help would rock.
View 3 Replies View RelatedI am converting a site from asp to .net and the previus writer did something I never saw.(I am somewhat new to programming all together). He put multiple values in a single cell of the database. I have always learned to use a seperate column for each value.
Is this a classic asp thing and there are better ways now? Or is this something I should do myself? The columns type is text and the contents look like this:<Details Expertise="bla bla" Description="We are a three-divisional company ...," WebSite="www.blabla.com" AccountLevel="Free" AccountStatus="Active" WorkHomeZIP="22222" ContractStartDate="01/01/2003" ContractEndDate="12/31/2003"><Address Location="Work" State="Oh" ZIP="22222"/><Email Location="Work" Value=""/><Phone Location="Fax" Code="9801" Ext=""/></Details>
I'm trying to use DTS to import data from an XLS into a SQL table.It works fine in that it INSERT's the data. However, I need it toUPDATE the table, based upon a ProjectID. Can this be done?Can a DTS package be fired from a SP using parameters?Eg UPDATE tProjects SET MyField1=XLS.Sheet1.CellA1,MyField2=XLS.Sheet2.CellA1 WHERE ProjectID = @ProjectID.Also, it must handle dynamic XLS file names, eg 981-Budget.xls,513-Budget.xls, xyz-Budget.xlsIs this the best way to go? Other suggestions most welcome?Thanks everyone in advance!
View 2 Replies View RelatedHella all,
Is it possible to stack two images on top of each other in a table ?
Let me clarify where i'm going to.
I have a report where in one table i would like to display (in a graphical way) how much a sales person has sold towards
the whole sales amount.
To do so i would like to set my background of my cell to yellow and then use an image (just a green rectangle)
where i adjust the padding according to the percentage.
When i set my background to yellow and i insert my image in the cell, the textbox cell properties disapear and are
replaced with the image properties. So also my background that was defined in my textbox is gone.
Now i was thinking if i could set two images on top of each other (a yellow rectangle and a green rectangle). But when
i do that, one image is replaced with another.
Am i doing something wrong or is there another way to achieve what i want to do?
Greetz
Vinnie
Hello All,
I uploaded custtable under the database, the data looks fine except that the name that apprears has a lot of distance e.g
it should be :
firstname lastname however the format appears very strange:
firstname lastname
firstname lastname
fistname lastname
Same is the case with the address, I need to adjust or format the apperance that appears on the cell. Is there a way/ sql statement to format the data under the table so that the apprearence looks okay.
I will really appreciate any sort of help on this one.
Thanks,
Rashi
need help
condition 1
replace characters on condition in table and cells
but only if
how to do it - if i put * (asterisk) like in employee 111 in day1 - the the upper characters the (A S B)
i replace characters with '-'
and it must work dynamically
condition 2
replace characters on condition in table and cells
but only if
if i put number or 1 , 2 , 3 , 4 above any cell for example( employee id=222 name =bbbb day1)
i replace characters with '0' and '#'
and it must work dynamically
table before the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
A
S
B
e
t
y
R
Y
M
j
o
p
111
aaaa
1
*
*
*
*
222
bbbb
2
1
1
222
bbbb
1
A
-
-
-
B
-
333
cccc
2
333
cccc
1
444
dddd
2
3
4
444
dddd
1
-
-
C
C
555
EEE
2
A
G
C
555
EEE
1
*
table after the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
-
-
-
-
-
-
-
-
-
-
-
-
111
aaaa
1
null
null
null
null
222
bbbb
2
0
0
222
bbbb
1
#
-
-
-
#
-
333
cccc
2
333
cccc
1
444
dddd
2
0
0
444
dddd
1
-
-
#
#
555
EEE
2
-
-
-
555
EEE
1
null
tnx for the help
Is there any way I can set the background colour for an image in a table cell (or even for a non-embedded image for that matter)? I always seem to get a white background.
It is a GIF image file.
Thanks
What would be an equivalent expression for ISNULL(datafield, 0) for a table/matrix cell? I am using iif( Len().. to find out if there is something in the cell, and displaying zero in the cell if the length of cell item is 0, however am wondering if there is any better/elegant way of doing that?
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
Hi
I have a table with a user column and other columns. User column id the primary key.
I want to create a copy of the record where the user="user1" and insert that copy in the same table in a new created record. But I want the new record to have a value of "user2" in the user column instead of "user1" since it's a primary key
Thanks.