Hi All,
I want to know that how we will be able to update multiple rows in single transaction.
e.g If original database is
S_No Data
1 -
2 -
3 -
4 -
After
S_No Data
1 1
2 3
3 6
4 10
Got a beginner question here...
Let's say I have a database table that houses server information with four columns: make, model, serial #, ip address. And assume there are ten rows with that information filled out. How could I display all the rows of information on a single webpage (ASP.NET), with all the fields being editable; and a single save button that would send any changes to the database (in reality I guess it would be sending all rows and fields to the database, and just overwrite the previous data).
Could a page such as that be created using FrontPage 2003 or Dreamweaver MX 2004?
This would be strictly for updating information. I would have a separate form for adding a new entry.
Thanks for your help.
I am renovating an existing application and am converting the existing passwords into hashed values using SHA1. I know how to compute the hashed values as a byte array for each record. What I don't know how to do easily is update all of the records i a single call to the database. Normally, I would just do the following:UPDATE HashedPassword = someValue WHERE UserID = 101;
UPDATE HashedPassword = someOtherValue WHERE UserID = 102;
...
What I don't know is what someValue and someOtherValue should be. How do I convert my byte array into string representation that SQL will accept? I usually execute multiple statements using Dim oCmd as New SqlCommand(sSQL, MyConn) and then call oCmd.ExecuteNonQuery().
Alternatively, I found the following code that uses the byte array directly but only shows a single statement. How could I use it to execute multiple statements as shown above?'FROM http://aspnet.4guysfromrolla.com/articles/103002-1.2.aspx
'2. Create a command object for the query
Dim strSQL as String = _
"INSERT INTO UserAccount(Username,Password) " & _
"VALUES(@Username, @Password)"
Dim objCmd as New SqlCommand(strSQL, objConn)
'3. Create parameters
Dim paramUsername as SqlParameter
paramUsername = New SqlParameter("@Username", SqlDbType.VarChar, 25)
paramUsername.Value = txtUsername.Text
objCmd.Parameters.Add(paramUsername)
Dim paramPwd as SqlParameter
paramPwd = New SqlParameter("@Password", SqlDbType.Binary, 16)
paramPwd.Value = hashedBytes
objCmd.Parameters.Add(paramPwd)
'Insert the records into the database
objConn.Open()
objCmd.ExecuteNonQuery()
objConn.Close()
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I have over 500 transaction records in a single DB process handling within SQL transaction (Begin, Commit, RollBack and End).
Is there any limitation for the following rollbacktransaction function to handle more records (eg. over 500 records)? Public Shared Sub RollBackTransaction()
Dim transactionObj As Object
Try
transactionObj = SqlTransaction.GetExistingTransaction
If (Not IsNothing(transactionObj)) Then
CType(transactionObj, SqlTransaction).RollBack()
End If
Catch ex As Exception
Throw New Exception(ex.Message)
End Try
End Sub
We have a scenarion in a batch job. There are 3 sp's which are executed for every record in a table. After the execution of first sp the second sp executes depending upon the result of first sp. Simillarly for 2nd and 3rd sp.
Now if any sp execution fails than the whole transaction for that record in the table has to be rolled back.
Can this whole process of executing the multplie sp's insides a single transaction be accomplished using service broker with either a single queue or multiple queues?
sp 1 (1 record)
__________ l_____________
l l l sp2 ( 3 records for 1 record in sp1)
Simillalry for the one record in sp2, sp3 executes for multiple records.
Or in other words if processing of any message in a queue fails all the messages that have been processed already shoould be rolled back and no further execution should happen?
Also i would like to know can a conversation group be rolled back if processing of any message in the conversation group fails. I am asking this as we can club sp2 and sp3 together to get the results directly and than try for parallel processing.
P.S. We have a multiprocessor 64 bit server.
thanks
hi,friends
we show record from multiple table using single 'selectcommand'.
like....
---------
select *
from cust_detail,vend_detail
---------
i want to insert value in multiple database table(more than one) using single 'insert command'.
is it possible?
give any idea or solution.
i want to update value in multiple database table(more than one) using single 'update command'
i want to delete value in multiple database table(more than one) using singl 'delete command'
it is possible?
give any idea or solution.
it's urgent.
thanks in advance.
Id account num acc_type
42 1376200071278 gl
42 1308111111111 ic
42 1291111111111 os
34 1245200000000 gl
34 1132485111111 ic
this is table structure.there are multiple records like this in a table . I need output as
id gl accountnum ic accountnum osaccountnum
42 1376200071278 1308111111111 1291111111111
34 1245200000000 1132485111111 -
This is how the data is organized:vID Answer12 Satisfied12 Marketing12 Yes15 Dissatisfied15 Technology15 No32 Strongly Dissatisfied32 Marketing32 YesWhat I need to do is pull a recordset which each vID is a single rowand each of the answers is a different field in the row so it lookssomething like thisvID Answer1 Answer2 Answer312 Saitsfied Marketing Yesetc...I can't quite get my mind wrapped around this one.
View 13 Replies View RelatedFirst of all i do not know whether this is the right form to ask the question Let me describe the scenario iam using Iam generating xml files at a particular place and sending them to a server xml1|--------------------->dataset1------------------------------>adapter1.update(dataset1)xml2|----------------------->dataset2----------------------------->adapter2.update(dataset2)xml3|----------------------->dataset3------------------------------>adapter3.update(dataset3) all the three updates should happen in only one transaction if any one of the update fails then the transaction should rollbackcan anyone tell me a way to do iti am desperately in search of any ways to do it can anybody help please
View 2 Replies View RelatedHello,
I have problem for insert multiple query for insert in differenr tabels for a single record.
I have mail record for candidate and now i wants to insert candiate labour info, candidate passport detail in diff tabel like candidatLabour and candidatePassport,
i used two store procedure for it and i write code for it.and it works fine,but i think that if one SP executed and one record inserted but then some problem occure and 2nd SP not executed then...........
so plz help me
Thanks
I'm trying to update a checkbox from "False" to "True" within a single table for multiple records. I can update a single record using the script below. However, I'm having trouble applying additional Id's to the string.
(Works) - Update Name_Demo set KEY_CONTACT = 'true' where ID = 225249
(doesn't work) - Update Name_Demo set KEY_CONTACT = 'true' where ID = '225249, 210014, 216543'
It says query executes successfully but returned no rows.
I have two tables
TermID, Term
1--- Abc
2--- Test
4--- Tunic
and
TermID, RelatedTermID
1 --- 2
1--- 4
2--- 4
I need to get back something like this
TermID, Term, RelatedTermsInformation
1--- test--- test,tunic#1,4
that above was my solution, get the relatedterms information and comma separate, and then put a # and get all the ids comma separate them and then put the in one field. then I can later parse it in the client
this does not seem like a very good solution ( or is it?)
If posible it would be nice to get something like this
TermID, Term, RelatedTermsInformation
1 test RelatedTermsTwoDimentionalArray
but I am not sure how this idea could be implemented using the capabilities of SQL.
my other option is have the client make one call to the database to get the terms and then lots of another calls to get the relatedTerms, but that will mean one trip to the DB for the list term, and one call for every single term found.
any ideas in how to make this better ?
I have two tables CompanyTab and OrderTab .CompanyTab table contain one record for each client while OrderTab table contain multiple orders for clients.
I have data in both table like
CompanyTable
ID Name
1 name1
2 name2
OrderTable
OrderId CompanyTabID
1 1
2 1
3 1
4 1
In my query I want to show all orders in single row.
ID Name Orders
1 name1 1,2,3,4
2 name2 null
Is anybody can help on it.
Thanks
Arvind
I would like to know if it's possible to return a single record by joining the tables below. [Persons]
PersonID [int] | PageViewed [int]
=============== =================
1 10
2 5
3 2
4 12
[PersonNames] - PersonID JOINS Persons.PersonID
PersonID [int] | NameID [int] | PersonName [nvarchar] | PopularVotes [int]
=============== ============== ======================= ===================
1 1 Samantha Brown 5
1 2 Samantha Green 10
2 3 Richard T 10
3 4 Riko T 0
4 5 Sammie H 0
[AltNames] - backup for searches caused by common spelling mistakes
AltNameID [int] | AltNames [nvarchar]
================ =============================
1 Sam, Samantha, Sammie, Sammy
2 Riko, Rico
[PersonAllNames] - JOINS [PersonNames.NameID] ON [AltNames.AltNameID]
NameID [int] | AltNameID [int]
============= ================
1 1
4 1
3 2
This is ideally what I'd like to have returned: PersonID | PageViewed | MostPopularName | NameSearch
========= ============ ================= =================
1 10 Samantha Green Samantha Brown, Samantha Green, Sam, Samantha, Sammie, Sammy
2 5 Richard T Richard T
3 2 Riko T Riko T, Riko, Rico
4 12 Sammie H Sammie H, Sam, Samantha, Sammie, Sammy
[MostPopularName] is [PersonNames.PopularVotes DESC].[NameSearch] combines all records from [PersonNames.PersonName] and [AltNames.AltNames].
The purpose for this is that I'd like to cache the results table so that all searches can just perform a lookup against the NameSearch field.
Any help would be greatly appreciated.
Thanks, Pete.
I have a table JOBCODE which contains a list of codes.
I want to insert these values into table VIEWS as a list separated by spaces.
E.G.
Table Jobcodes looks like this
code
1
2
3
4
5
6
And I want table Views to look like this:
field1
1 2 3 4 5 6
How do I go about this?
I have two tables. Table 1 has column "job", table 2 has column "job" and column "item". In table table 2 there are multiple "items" for each "job"
I would like to insert all of the "items" into table 1, based on a join table1.job = table2.job
Can an Update statement support multiple SET/WHERE clauses? The following example won't work, but this is what I'd like to be able to do:
Code Snippet
UPDATE [CPSAgacar].tmp_CTA2
SET [Admit Date] = NULL
WHERE [CPSAgacar].tmp_CTA2.CalcAdmitDate IS NOT NULL
SET CalcDischDate = Discharge
WHERE [CPSAgacar].tmp_CTA2.CalcAdmitDate IS NOT NULL AND CPSAgacar].tmp_CTA2.CalcDischDate IS NULL
Thanks.
I have 2 tables People and Scores. A person might have 1-5 scores (unknown at time of Query). I would like to query the two tables into a results table and if person does not have a record the score will be zero. Scores also have a test number so you know which score it is. I can get it done with Stored Proc but I have to use Temp tables and then put the temp tables together.
People
Name ID
Tom5
Dick2
Harry3
Larry4
Curly1
Scores
PrimaryKeyPeopleIDScoreTestNumber
12801
[code]....
Results
PrimaryKeyPeopleIdScore1Score2Score3Score4Score5Name
1110090807090Curly
22800000Dick
33909010000Harry
44507090900Larry
559070000Tom
I know this isn't right but I'm trying to build a single query in PHP to re write the sortorder column starting at 0 and writing every row in order.
Code:
update categories set (sortorder=0 where catid=32), (sortorder=1 where catid=33),(sortorder=2 where catid=36) where userid=111
PHP Code:
$qt="update categories set ";
for($i=0;$i<$num;$i++){
$a=$i+1;
$qt.="sortorder=$i";
if($a<$num){
$qt.=", ";
}
}
$qt.=" where userid=111";
Using PHP I can amend the loop above to slot in a row I want so I can change the sort order.
unfortunately I'm not sure how to build such a query in mssql, can anyone help?
Hello All,
I want to update multiple tables using single query and fields name are same of tables.
I am trying like:
update tablename1 t1,tablename2 t2 set t1.fieldname1 = t2.fieldname1 = 'value' where condition;
or
update tablename1 t1,tablename2 t2 set t1.fieldname1 = 'value' t2.fieldname1 = value where condition;
Plzzzzzz help me.Thanx in advance.
Thanx & Regards,
Smita.
Hi,
I am using SQl server 2005.
want to update rows in 2 tables,which have a relation on Id field.
Some thing like
Update tblA a , tblB b
Set a.UpdatedDt=getdate(),b.Updateddt=getdate()
where a.Id=b.Id and a.Name='xyz'
can anyone out there help me?
Thanks
Renu
Hai
I want to update mutiple rows using single statement.
Gender
M
F
Now I want to update M as Male and F as Female in Gender Table using single Sql Statement.
Can anyone help me please
Thanks in Advance...
Suresh Kumar
I have a query that will return one record as its results if you provide two variables: @login and @record_date. This works great if you only want one result. However, now what I want to do is not provide those variables and get the result set back for each login and record_date combination. The hitch is that there are several other variables that are built off of the two that are supplied. Here is the query:
DECLARE @login char(20), /*This sets the rep for the query.*/
@record_date datetime, /*This is the date that we want to run this for.*/
@RWPY decimal(18,2), /*This is the required wins per year.*/
@OCPW decimal(18,2), /*This is the opportunities closed per week.*/
@OACW decimal(18,2), /*This is opportunities advanced to close per week.*/
@TOC decimal(18,2), /*This is the total number of opportunities in close.*/
@OANW decimal(18,2), /*This is opportunities advanced to negotiate per week.*/
@TON decimal(18,2), /*This is the total number of opportunities in negotiate.*/
@OADW decimal(18,2), /*This is the opportunities advanced to demonstrate per week*/
@TOD decimal(18,2), /*This is the total number of opportunities in demonstrate.*/
@OAIW decimal(18,2), /*This is the opportunities advanced to interview per week.*/
@TOI decimal(18,2), /*This is the total number of opportunities in interview.*/
@OCW decimal(18,2), /*This is the opportunities created per week.*/
@TOA decimal(18,2) /*This is the total number of opportunities in approach.*/
SET @login = 'GREP'
SET @record_date = '12/18/2007'
SET @RWPY = (SELECT ((SELECT annual_quota FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)/(SELECT target_deal FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)))
SET @OCPW = (SELECT @RWPY/weeks FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OACW = (SELECT @OCPW/cls_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOC = (SELECT @OACW*(cls_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OANW = (SELECT @OACW/neg_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TON = (SELECT @OANW*(neg_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OADW = (SELECT @OANW/dem_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOD = (SELECT @OADW*(dem_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OAIW = (SELECT @OADW/int_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOI = (SELECT @OAIW*(int_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OCW = (SELECT @OAIW/app_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOA = (SELECT @OCW*(app_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SELECT loginname,
CAST(@TOA AS decimal(18,1)) AS [Opps in Approach],
app_time AS [Approach Average Time],
app_perc_adv AS [Approach Perc Adv],
CAST(@TOI AS decimal(18,1)) AS [Opps in Interview],
int_time AS [Interview Average Time],
int_perc_adv AS [Interview Perc Adv],
CAST(@TOD AS decimal(18,1)) AS [Opps in Demonstrate],
dem_time AS [Demonstrate Average Time],
dem_perc_adv AS [Demonstrate Perc Adv],
CAST(@TON AS decimal(18,1)) AS [Opps in Negotiate],
neg_time AS [Negotiate Average Time],
neg_perc_adv AS [Negotiate Perc Adv],
CAST(@TOC AS decimal(18,1)) AS [Opps In Close],
cls_time AS [Close Average Time],
cls_perc_adv AS [Close Perc Adv]
FROM #pipelinehist
WHERE loginname = @login AND record_date = @record_date
Here is some sample data to use with this. With this sample data what I want to get back is a total of 30 records in the result set each with its data specific to the login and record_date of that returned record.
CREATE TABLE #pipelinehist (
glusftboid int IDENTITY(1,1) NOT NULL,
record_date datetime NOT NULL,
loginname char(20) NOT NULL,
app_new float NOT NULL,
app_time float NOT NULL,
app_perc_adv float NOT NULL,
int_time float NOT NULL,
int_perc_adv float NOT NULL,
dem_time float NOT NULL,
dem_perc_adv float NOT NULL,
neg_time float NOT NULL,
neg_perc_adv float NOT NULL,
cls_time float NOT NULL,
cls_perc_adv float NOT NULL,
target_deal money NOT NULL,
annual_quota money NOT NULL,
weeks int NOT NULL
) ON [PRIMARY]
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'AREP', 56.8, 26.9, 0.57, 29.5, 0.47, 20, 0.67, 80.7, 0.53, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'BREP', 33.2, 0.5, 0.9, 7.7, 0.77, 8, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'CREP', 210.2, 0.3, 0.87, 6.6, 0.5, 13.7, 0.4, 16.3, 0.43, 1.5, 0.91, 461.25, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'DREP', 47.6, 5, 0.53, 33.3, 0.6, 57.5, 0.53, 50, 0.7, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'EREP', 75.3, 110.9, 0.47, 36, 0.5, 17.4, 0.87, 20.3, 0.6, 7.2, 0.83, 2021.74, 775000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'FREP', 17.2, 23.3, 0.73, 6.8, 0.8, 6.3, 0.93, 29.7, 0.67, 15.5, 0.83, 2218.95, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'GREP', 105.4, 67, 0.2, 32.9, 0.43, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'HREP', 116.4, 118.5, 0.33, 30.9, 0.77, 46.3, 0.77, 46.3, 0.6, 0.9, 0.97, 1735.13, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'IREP', 143.3, 9, 0.77, 96, 0.17, 21.6, 0.77, 39.9, 0.43, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 67.6, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'KREP', 107.6, 38.2, 0.23, 47.5, 0.47, 21.3, 0.77, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'LREP', 18.6, 8.3, 0.87, 23.2, 0.57, 2.6, 0.87, 12.2, 0.67, 1, 1, 1229.02, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'MREP', 4, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.4, 1, 1091.22, 350000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'NREP', 54, 21.6, 0.57, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'OREP', 37.6, 24.4, 0.57, 50.1, 0.43, 6.7, 0.87, 15.6, 0.73, 0.9, 0.97, 1163.48, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'AREP', 57.2, 32.5, 0.6, 29.5, 0.47, 20, 0.67, 85.6, 0.5, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'BREP', 33.9, 0.5, 0.93, 7.8, 0.73, 8.3, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'CREP', 152.1, 0, 0.87, 4.3, 0.67, 9.7, 0.47, 15.7, 0.47, 1.8, 0.85, 396.43, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'DREP', 80.5, 9.8, 0.5, 40.7, 0.57, 68.3, 0.43, 64.2, 0.57, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'EREP', 61, 92.1, 0.5, 31, 0.53, 16.9, 0.83, 17.7, 0.6, 7.3, 0.83, 2318.04, 775000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'FREP', 19.4, 21.1, 0.7, 5.3, 0.77, 2.2, 0.93, 33.3, 0.7, 9.7, 0.87, 1937.17, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'GREP', 81.7, 40.5, 0.3, 33, 0.37, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'HREP', 128.6, 115.7, 0.3, 30.9, 0.77, 46.3, 0.77, 48.8, 0.6, 0.9, 0.97, 1728.29, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'IREP', 100.9, 3.4, 0.77, 86.2, 0.27, 18, 0.8, 54.7, 0.37, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 63.5, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'KREP', 285.2, 36.5, 0.1, 46, 0.43, 24.2, 0.73, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'LREP', 17.6, 7.3, 0.9, 21.5, 0.57, 1.7, 0.87, 12.2, 0.67, 1, 1, 1250.54, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'MREP', 26.7, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.3, 1, 979.7, 350000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'NREP', 61.6, 20.8, 0.5, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'OREP', 31.6, 16.9, 0.63, 50.1, 0.43, 7.2, 0.87, 19.5, 0.7, 0.9, 0.97, 1303.48, 330000, 50)
We have control table which will be useful whether we need to start the job or not. If we are starting the Job we will make it to 1.
Below is the Table Structure.
Table Name IN_USE_FG
CUST_D 0
PROD_D 0
GEO_D 0
DATE_D 0
Now we have different packages for 4 tables data loading. These 4 packages will start at a time. Before going to load the data we have to make the Flag to 1 and after that we have to load it. Because of this we have written Update statement to update the Value to 1 in respective Package.
Now we are getting dead lock because we are using same table at a same time. Because we are updating different records.
I have created an SSIS package which processes daily financial information to a sql server database. These processes are to be outputted to excel spreadsheets to a readable report format for management to review. Some of these reports are laid out in a way that is not just tabular output but requires customized placement of data on an excel spreadsheet to specific cells.
I am able to place an initial resultset of a query output from the database in a tabular excel template through SSIS but the issue is at the end of that placement in the spreadsheet I am required to place another output below that tabular output in a different format from the initial output which I have shown below.
I have a question, what kind of Query or function do I have to use to UPDATE multiple record that I just want to add a letter at the end of the existing OrderNum.
Before
ID NAME OrderNum
1 Pete WEB123
2 Paul WEB124
3 Sam WEB125
4 Tim WEB126
After
ID NAME OrderNum
1 Pete WEB123A
2 Paul WEB124A
3 Sam WEB125A
4 Tim WEB126A
I have two tables called ECASE and PROJECT
In the ECASE table there is trigger to get the max value of case_id column in ecase based on project and increment one to that case_id value and insert into ecase table .
When we insert a new record to the ECASE table this trigger calls and insert the case_id column value.
When i run with multiple threads , the transaction is rolled back because of trigger . The reason is , on the project table the lock is happening while getting the max value of case_id column based on project.
I need to prevent the deadlock .
I have this sql stored procedure in SQL Server 2012:
ALTER PROCEDURE [dbo].[CreateBatchAndSaveExternalCodes]
@newBatches as dbo.CreateBatchList READONLY
, @productId int
, @cLevelRatio int
, @nLevelRatio int
AS
set nocount on;
[Code] ....
I have an 'update' query that looks like this:
update wce_contact
set blank = 'missing'
where website in ('www.name1.co.uk','www.name2.co.uk','www.name3.co.uk')
I know this query will set 'blank' to missing when it matches the above websites. However if i wanted to set blank to 'missing' where mail1date is not null and mail2date is not null (keep going to mail18date not null) how exactly would i go about this?
I guess it would be a case of adding another bracket somewhere but im unsure?
I need to update more than one record at once. I have ~ 100 records that I have to update and don't want to execute query 100 times.
My query looks like this:
Update Table1
Set Table1.field1 = ( select Table2.field1 from Table2 where Table2.field2 IN ('a', 'b', 'c')
where Table1.field2 IN ( 'a', 'b', 'c')
It obviously failed because subquery returned more than one value and error message stated that I can't use '=' operator in this case.
My question: how could I update the same column from many records in one execution?
I have two tables that can be created with sample data using the DDL at the bottom of this post. What I'm looking to do is update the QtyReceived column in tblPurchaseOrderLineDetail from the Qty column in tblReceivedItems. However, the tricky part that I can't figure out is splitting these quantities out over multiple lines. I should only be allowed to receive up to the QtyOrdered column in tblPurchaseOrderLineDetail.
For a specific example from the sample data we'll look at PurchaseOrderDetailID 28526. From the tblReceivedItems, there are three records with quantities of 48, 48, and 20. From the tblPurchaseOrderLineDetail there are three records of QtyOrdered of 55, 45, and 20. What I would like to happen is fulfill the records in the tblPurchaseOrderLineDetail sequentially (essentially in order of ExpectedDate). So, the QtyReceived would be 55, 45, and 16 for the corresponding records. If there is already a quantity in the QtyReceived column, but it's less than the QtyOrdered column, the quantity needs to be added to the column (not overwritten).
DDL To CREATE Sample Tables and Data:
CREATE TABLE [dbo].[tblReceivedItems](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PurchaseOrderDetailID] [int] NULL,
[Qty] [int] NULL)
SET IDENTITY_INSERT [dbo].[tblReceivedItems] ON
INSERT [dbo].[tblReceivedItems] ([ID], [PurchaseOrderDetailID], [Qty]) VALUES (1, 28191, 48)
[code]....
I have this update statement that works for one record. How do I write it to include multiple records at once. Please see sample below.
update
mklopt
set
FRMDAT =
'12/31/2014'
where
JOBCOD =
'PH14789'
I also want to include the following instead of running it one at a time
PH17523
PH17524
PH17525
PH17553
PH17555
PH17556
PH17557
PH17558
PH17571
PH17573
PH17574
PH17575
PH17576
PH17577
PH1757