Updating Similar Multiple Table In Different Databases Automatically
May 16, 2008
Hi Guys
I have 4 databases in the same space.My users use all of them and use the same username and password to log into these 4 databases.In each of these databases,i have put a control table to allow me to keep track of all users that have to reset their passwords.
The control table consists of the username and flag fields.When the flag is ON(1) the user is forced to reset thier password and if the flag is OFF(0) they are not.
When a user logs into any one of these databases and they have to reset thier password,how do i make sure that all the other tables in other databases are also updated to make sure that the user is not forced to reset their password again when they log into those other databases later since they are using the same username and password for all databases.
I am planning to use a stored procedure which i will put into all the four databases and when a user logs in and has to reset their password,that sproc is called and automatically updates all the other 3 tables in other 3 databases.
Some SQL examples will be very appreciated.
Thanks.
View 5 Replies
ADVERTISEMENT
Dec 16, 2007
Hello friends,
I am new to the SQL Server 2005 development.
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database
which is configured and set on the hosting web server. Right now for managing my sql server 2005 database,
i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database,
it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors.
Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still
the problem persist.
Thanks in advance. Any help will be appreciated.
View 5 Replies
View Related
Jun 25, 2002
I have a problem like this. I have an application which shud be internet hosted. All transactions should be updated to the central server of the net as well as an intranet DB server. (I'll have a DB server - SQL Server 2000 in each intranet). Is this possible.. i'm planning to use ASP to develop the net based application.
Thank you in advance..
Geetha R
View 2 Replies
View Related
Jun 3, 2015
I am very well versed on manipulating data using passthrough queries through access or the command object in ADO/VBA but this problem requires a sql server side solution and I have been assigned the task
Scenario
Access via an ODBC link cannot view Sql table data that uses a BigInt as a primary key. Access can update the data, insert data ands delete data to these tables - but viewing (by design) returns the actual count of the rows but each field is populated with #deleted.
I can view the table data if I use a passtyhrough query but performing row level and field level edits from there is impossible. Not all people have Studio manager so that is not an option.
We are moving away from our legacy application and the development company has already developed the schema using the BigInt so changing that to a numeric or integer is out of the question. My boss has determined that using a set of bridge tables with identical tables in a different database where we replace the bigint with int will work - we can view the data in the "bridged" database and even update it from select queries and simply by opening the table in view mode from Access.
Here is the hard part (for me) because I have never done this. I can write SQL and understand the security/roles etc, but I have never administered SQL server regarding server side triggers and stored procedures - I have always used the command object or passthrough queries to deal with sql stored procedures. I need to either
A)Create some trigger behind the tables in my bridge table that will fire a stored procedure to replicate the data to the bigint database. They are both on the same sever.
B)Somehow create a "mirror" that always replicates from my bridge database tables (5 of them) to the new database.
View 3 Replies
View Related
Dec 3, 2007
In a package we have statements pointing to 2(or more) different databases on the server. When moving between environments, is there an easy way to change statements like:
UPDATE t1
SET t1.name = t2.name,
t1.age = t2.age
FROM DB1..Person t1
INNER JOIN DB2..PersonToo t2
ON t1.PersonID = t2.PersonID
I can think only of building the statements replacing the database names with variables, but that's not an easy way. I do not know how to use package variables in this situation.
1 way of doing this may be by using a Lookup or Conditional Split and use the resulting dataflow in a SP or such to update, using parameters...
It all sounds very messy, and I still don't know how
Any ideas?
TIA,
View 7 Replies
View Related
Jul 24, 2015
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',Â
@profile_name =
'SQL SMTP',
  Â
[code]....
View 3 Replies
View Related
Mar 15, 2007
I'm not quite sure if this is the correct forum to post this, if not please advise where should I post.
I have 7 databases with same structure, but different data in it, I need to have a query to consolidade some info from all of them in one report, is it possible just in onw script? how should I do it?
thanks,
Marcus
PS: I'm a beguinner in this so I apologize if the question seems stupid, or wrong.
View 1 Replies
View Related
Nov 16, 2006
Hi
I need to update one of the test databases:
There are about 140 tables which don€™t get used but I don't want to delete to I want to prefix them with 'x'.
Is this possible or do I have to alter each one, one at a time
Thanks
Rich
View 2 Replies
View Related
Dec 3, 2014
Is there any way to compare two similar databases (A & B) stored procedure. I have to find stored procedure in second database B with respect to the difference.
View 7 Replies
View Related
Sep 25, 2007
Hi,
I have a table called "tblProducts" with following fields:-
ProductID(Pk, AutoIncrement), ProductCode(FK), ProdDescr.
So to the above table I have added a new field/column named "ProdLongDescr(varchar, Null)"
So, I need to populate this newly added column with specific values for each row depending on "ProductCode" which is different forevery row. The problem is that I have 25 rows.So instead of Writing 25 individual update scripts, is there a way in which single query will do the same job instead of writing one update query for each row ?. If so can some one guide me how to achieve that OR point to me a good resource.
Below are a couple of Individual update scripts I Wrote. "ProductCode" is different for all 25 rows.
Update tblValAdPackageElement SET ProdLongDescr = 'Slideshows' WHERE ProductCode = 'SLID'
And szElementDescr='Slideshow'
if @@error <> 0
begin
goto ErrPos
end
Update tblValAdPackageElement SET ProdLongDescr = 'CategorySlideshows' WHERE ProductCode = 'SLDC'
And szElementDescr='CategorySlideshow'
if @@error <> 0
begin
goto ErrPos
end
Thanks,
View 1 Replies
View Related
Sep 3, 2014
I'm trying to update a checkbox from "False" to "True" within a single table for multiple records. I can update a single record using the script below. However, I'm having trouble applying additional Id's to the string.
(Works) - Update Name_Demo set KEY_CONTACT = 'true' where ID = 225249
(doesn't work) - Update Name_Demo set KEY_CONTACT = 'true' where ID = '225249, 210014, 216543'
It says query executes successfully but returned no rows.
View 3 Replies
View Related
Apr 12, 2007
Hello All
I am trying to figure out if what i am attempting to do is possible and whether or not my approach is wrong to begin with.
I am trying to build a custom report for our accounting system which is Traverse from Open systems. This is what i have done in the stored procedure thus far
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER PROCEDURE rptArFLSalesByCustItemized_sp
@custId pCustID,
@dateFrom datetime,
@dateThru datetime,
@itemIdFrom pItemId,
@itemIdThru pItemId
as
set nocount on
-- define some variables for previous year
declare @LYqty int, @LyAmt money, @LYfrom datetime, @LYthru datetime
-- set defaults
SET @itemIdFrom=ISNULL(@itemIdFrom,(SELECT MIN(itemId) FROM tblInItem))
SET @itemIdThru=ISNULL(@itemIdThru,(SELECT MAX(itemId) FROM tblInItem))
SET @LYfrom=DATEADD(YEAR,-1,@dateFrom)
SET @LYthru=DATEADD(YEAR, -1, @dateThru)
-- create small temp table to hold customer info
Create Table #tmpArCustInfo
(
custId pCustID,
custName VARCHAR (30),
)
-- populate customer temp table with info
Insert into #tmpArCustInfo
select custId, custName
from tblArCust
WHERE custId = @custId
-- create a temp table to hold the Data for each Item
Create Table #tmpArSalesItemized
(
itemId pItemId,
productLine VARCHAR (12),
pLineDesc VARCHAR (35),
descr VARCHAR (35),
LYQtySold int,
LYTDQtySold int,
QtySold int,
LYTDsales money,
totalSales money,
LastInvDate datetime,
)
-- populate the temp table with all of the inventory items
insert into #tmpArSalesItemized
select ii.itemId, ii.productLine, ip.Descr, ii.Descr, 0,0,0,0,0, NULL
from tblInItem ii, tblInProductLine ip
where ip.productLine = ii.productLine
AND ii.itemId BETWEEN @itemIdFrom AND @itemIdThru
-- update table with this years quantities
update #tmpArSalesItemized
SET QtySold = (select SUM(QtyOrdSell) from tblArHistDetail hd
where TransId IN (select TransId from tblArHistHeader where custId = @custId)
AND orderDate IN (select OrderDate from tblArHistHeader where OrderDate BETWEEN @dateFrom AND @dateThru)
AND hd.partId BETWEEN @itemIdFrom AND @itemIdThru
GROUP BY hd.partId
)
-- Return the temp tables results
select * from #tmpArSalesItemized, #tmpArCustInfo
drop table #tmpArSalesItemized, #tmpArCustInfo
return
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
My problems begin where i want to start updating all of the Qty's of the QtySold field. I have managed to get it to write the same sum in every field but i cannot figure out how to update each row based on the sum of the qty found for that item in the tblArHistDetails table, trouble is too that there is no reference to the custId in that table either. The custId resides in tblArHistHeader and is linked to the details table via the TransId column. So really i need to update many rows based on criteria from 2 other tables.
Can anyone please help? I dont have a clue how to make this work, and most of what i have learned about sql thus far has been from opening other stored procs etc in the accounting system and just reading to see how the developers have done things.
Thanks
Jamie
View 1 Replies
View Related
Sep 6, 2007
Hi,
i have a scenario where I have to read 2 files that update the same table (a temp staging table)...this comes from the source system's limitation on the amount of columns that it can export. What we have done as a workaround is we split the data into 2 files where the 2nd file would contain the first file's primary key so we can know on which record to do an update...
Here is my problem...
The table that needs to be updated contains 9 columns. File one contains 5 of them and file2 contains 4 of them.
File 1 inserts 100 rows and leaves the other 4 columns as nulls and ready for file 2 to do an update into them.
File 2 inserts 10 rows but fails on 90 rows due to incorrect data.
Thus only 10 rows are successfully updated and ready to be processed but 90 are incorrect. I want to still do processing on the existing 10 but cant affort to try and do processing on the broken ones...
The easy solution would be to remove the incorrect rows from the temp table when ever an error occurs on the 2nd file's package by running a sql query on the table using the primary keys that exist in both files but when the error occurs on the Flat File source, I can't get the primary key.
What would be the best suggestion? Should i rather fail the whole package if 1 row bombs out? I cant put any logic in the following package that does the master file update/insert from the temp table because of the nature of the date. I
Regards
Mike
View 4 Replies
View Related
Mar 8, 2007
i am using visual web developer 2005 and SQL Express 2005 with VB as the code behindi have a button and in the button click event i have written codes to INSERT to a database table - it has one primary keyso when i click the button, if there is already a row with primary key fields value as 10 and if i try to INSERT with the same value in the primary key field there will occur primary key constraintso , if i try to INSERT with the already existing primary key fields value, instead of INSERTing it should be UPDATEd without generating any errorplease help me
View 1 Replies
View Related
Apr 30, 2015
I am trying to multiple update records in Table B from a single record in Table A. To identify the records that need to be updated I used this:
Select
Table1.cfirstnameas'Table
1 First',Table1.clastnameas'Table
1 Last',Table1.ifamilyid,CR.icontactid,CR.lLiveswithStudent,
Table2.cfirstnameas'Table
2 First',Table2.cLastNameas'Table
2 Last',Table2.ilocationidas'Table
2 Location',Table1.iLocationIDas'Table
1 Location'
fromTable1
JoinTable3
CRonTable1.istudentid=CR.istudentid
JoinTable2
onCR.icontactid=Table2.iContactID
whereCR.lLivesWithStudent=1
andTable1.ifamilyid>0
andTable1.ilocationid<>Table2.iLocationIDandTable1.lCurrent=1
I need to update the ilocationid from Table 1 to all Table 2 records related to Table 1but there is no direct relation from Table 1 to Table 2. I needed Table 3 to make the connection from Table 1 to 2.
View 2 Replies
View Related
Apr 20, 2006
Hi champs!
Is it possible to make a database View over two different database installations on different machines?
Many thanks
kurlan
View 4 Replies
View Related
Jan 13, 2015
I have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
View 4 Replies
View Related
Aug 13, 2015
We have our replication environment with a separate SQL 2014 publisher, distributor and subscriber. We have a table named DPSP on 14 databases which is to be published via transactional replication to 1 subscription database.Â
The source tables are identical in name, schema and clustered index. We have created 14 tables in the subscription database with a suffix to the name (see below):
Â
Each table in the subscription database has its own uniquely named primary key and clustered index:
Below are the settings for one of the published article:
The same process is repeated for each DPSP table created in 14 separate publications. Snapshots are generated and subscriptions created successfully. After some time, the log reader starts to show the following errors in replication monitor:
2015-08-12 21:48:24.156 7 transaction(s) with 11 command(s) were delivered.
2015-08-12 21:49:04.233 5 transaction(s) with 7 command(s) were delivered.
2015-08-12 21:50:04.355 No replicated transactions are available.
2015-08-12 21:50:09.378 13 transaction(s) with 17 command(s) were delivered.
2015-08-12 21:51:12.168 No replicated transactions are available.
2015-08-12 21:52:12.306 No replicated transactions are available.
2015-08-12 21:52:32.337
[Code] ....
View 3 Replies
View Related
Nov 20, 2015
I have to run this 3 times for similar but slightly different parameters. I only change the very top peice of code slightly each time:
1. Partition by Forename, Surname, DOB, Postcode
2. Partition by Forename, DOB, Postcode
3. Forename, Surname, DOB.
As you can see very subtle change, ideally I'd like to find a way to run just one report where all of the above occur, the issue I face running separately is one person may appear on 1 or more giving duplicates.
USE HealthBI_Views;this bit below is basically grouping my output on Forename, Surname, DOB & Postcode. What the whole process is trying to achieve is to show where a patient which has all of the above fields identical but has a different patient identifier suggesting that the service has allocated to unique identifiers to the same person which will result in both records needing to be merged.
WITH cte
AS (SELECT *,
COUNT(HEYNo) OVER (
PARTITION BY Forename, Surname,
DOB
[code]...
--- this bit below is simply showing all instances where the above criteria is met and there are more then one instances.WHERE countOfHeyNo > 1
--- The final output display all patient identifiable information from the MF_PATIENT table so that the report can be created in SSRS and run routinely by the Data Quality Team who can then investigate each occurance.
View 5 Replies
View Related
Apr 18, 2015
Would it be possible to handle multiple file systems (e.g. xlsx, csv, mdb) with different /similar headers in single package without Script Component?
View 1 Replies
View Related
Oct 28, 2013
automatically replicates new databases to Availability Group partners - if you do a little prep work on your environment first.To make it work:
1) Create linked servers on all group members pointing to all other servers in the group, with names matching the hostnames they represent.
2) Ensure suitable credentials (or 'current context' impersonation) for linked servers. Also: Enable RPC and RPC OUT
3) Run the DDL code below.
4) Schedule hadr_replicate_queue on [master] to run as often as you want initial syncs to occur. Every 5-10 minutes is plenty for most purposes.
5) Connect to an availability group listener and call CREATE DATABASE :)
I use a slightly more extended version of this code at home to do things like permissions synchronization across replicas - I essentially allow applications to install direct to an availability group replica and then have all the relevant objects replicate to other nodes. I don't really like going through manually and doing things, even though there's an AddIn from SQLSkills for management studio - it still requires manual intervention.
The main use I have for this at home is that I'm using the Azure pack, and want to automatically ensure that my newly created 'SQL Server Cloud' databases are highly available, plus it means when I install a non-alwayson aware product it doesn't require any extra work afterwards to allow failover to another machine.
* AlwaysOn Self-Population Script
* By: Steve Gray / steve@mostlyharmful.net
* Usage: Free, but buy me a beer if you're ever in Brisbane.
**/
USE [master]
GO
IF EXISTS (SELECT * FROM sys.tables WHERE name='hadr_pending_replicate')
[code]....
View 4 Replies
View Related
Dec 10, 2007
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
View 3 Replies
View Related
Apr 4, 2015
I am working towards automating the process of testing our backups. For the meantime, I do it all manually - I copy the backup files (full + transaction logs) to our test server and then run the restore script. Once database restored I run the DBCC CheckDB. The results of checkdb I manually upload to our Sharepoint portal as proof that the backup file is intact with no errors.
here are some ideas I have but have not yet tested:
Create a maintenance plan with each 3 jobs:
--> Powershell script to copy the files from Prod server to Test server - add this scrip to Job1
--> Powershell script to restore databases files - add this script to Job2
--> Run the DBCC in powershell (yet to find if possible in PS) - add this script to Job3
I would like to use seperate jobs as to get a report on the duration and status of each job
Would also like to get the results of the DBCC Checkdb as proof that no errors were found for upload to our Sharepoint portal. Dont know if possible via the job.
View 8 Replies
View Related
Dec 16, 2001
I am using SQL server7.0. I am having two databases ,say database A and database B.Database A is the main database which is used in two /three projects.While database B is created by me for my work.From the database A, I am using the 4/5 tables, which i have copied in to the database B.
So, i want to update these tables in the database B as soon as any change (insert,update or delete ) occures on the tables in the database A.
That's why I am interested in doing these work.I have tried, but it doesn't work.So, I have placed these into these forum.
Is any body is having the trigger, procedure ready for doing these job. then plz,mail it to me
View 1 Replies
View Related
Aug 31, 2006
Hi,I have managed to create a second copy of my "live" database, forsoftware testing purposes.Inspecting the properties of the new database, everything seems inorder. The logical file name is the same, which I believe is fine, andthe physical database (and log file name) is different.However, despite the fact that there is no application currentlyaccessing the "testing" copy, both databases are seemingly beingupdated simultanously. I can tell this from the physical file sizes onthe server, which are identical, and growing at the same rate.Does anyone have any suggestions why this might be happening - and howI can stop it?Thanks in anticipation!Phil
View 1 Replies
View Related
Oct 15, 2009
is there a way to update multiple rows in one update query in tsql? what I wanted to do is for example I got a table containing
code : desc
1 : a
2 : b
3 : c
4 : d
1 : e
3 : f
I wanted to update it to
code : desc
1 : x
2 : b
3 : y
4 : d
1 : x
3 : y
how to do it?
View 5 Replies
View Related
Sep 21, 2006
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
Any suggestions?
View 7 Replies
View Related
Jun 10, 2004
Hello everyone.
I'm currently trying to figure out a good way to keep my Local and Remote Databases in sync. Whenever I make changes to one or the other I spend a lot of time manually adjusting the other to match. I want to be able to set up an update page that accesses my Remote database and Local database and Updates the two accordingly.
I really don't know where to start with this one. I'm not sure at all as to how to simultaneously connect to two different databases, on two different servers, and Udate from one another. Does anyone know any good articles to get me started?
Thanks ahead for your replies.
-Alec
View 1 Replies
View Related
May 26, 2007
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?Thanks in advance.
View 4 Replies
View Related
Sep 13, 2007
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
View 8 Replies
View Related
Nov 15, 2006
Hi!
I have 7 source databases and one target database, all using the same structure. The structure is made of 10 tables, with foreign key constraints.
I need to merge the source databases into the target (which won't have any data before that process, but will already have the correct schema), and to keep the relationships between the records.
I know how to iterate over the source databases (with SMO foreach), but I'd like to know if someone can advise the best copy method for that context in SSIS ? (I don't want to keep the primary keys, but I need to keep the relationships...)
Any pointer most welcome!
best regards and thanks
Thibaut
View 1 Replies
View Related
Oct 30, 2006
Hi,I am working on SQL Server.
I have a table with columns that need to be broken down. I nees to break this table:
TelNo1 TelNo2 TelNo3
555-44-33 555-43-88 555-46-89
into:
Tel_Number
555-44-33
555-43-88
555-46-89
I tried using the union statement but i just did'nt succed. Can anyone help me,please
View 1 Replies
View Related
Oct 8, 2007
Hi,
I have 4 tables :
Code Block
Create Table #Request ( [requestid] int , [stateno] nvarchar(5) , [cityno] int , Callid int, UniqueNo int);
Create Table #RequestDetail(reqdetailid int, [customername] Varchar(20), [customerage] int, requestid int);
Create Table #Call(Callid int,Calltype int,callDetailid int )
Create Table #CallDetail(callDetailId int,empid int)
Insert into #CallDetail VALUES(12123,1)
Insert into #CallDetail VALUES(53423,1)
Insert into #CallDetail VALUES(6532,1)
Insert into #CallDetail VALUES(82323,1)
Insert into #CallDetail VALUES(124235,1)
Insert Into #Call VALUES(111,1,12123)
Insert Into #Call VALUES(112,1,53423)
Insert Into #Call VALUES(114,1,6532)
Insert Into #Call VALUES(123,2,6532)
Insert Into #Call VALUES(134,1,124235)
Insert Into #request Values('324234','SA023',12,111,0);
Insert Into #request Values('223452','SA023',12,112,0);
Insert Into #request Values('456456','SA024',12,114,0);
Insert Into #request Values('22322362','SA024',44,123,0);
Insert Into #request Values('22654392','SA023',12,134,0);
Insert into #requestdetail values(1, 'Bill',23,'324234')
Insert into #requestdetail values(2, 'Tom',25,'223452')
Insert into #requestdetail values(3, 'Bobby',27,'456456')
Insert into #requestdetail values(4, 'Guck',29,'22322362')
Insert into #requestdetail values(5, 'Bobby',33,'22654392')
1. My stored proc will take the CallDetailID.
2. I have to find out the requests made on this calldetail.
3. After getting the request, i want to take the Customername, cityno of the request/requestdetail and pass it again to #request table to search for any duplicates within the request.
4. If found return the details of the original record :
[A similar requirement was solved earlier, but the structure has changed. This is a seperate requirement with different table strucure. Hence a new post. ]
thanks
View 7 Replies
View Related
