I have these following table Faculty and #tempFaculty and I want to save chages that I made in Faculty also to #tempFaculty(which is temporal)
I tried this but Its not working
alter trigger [trifaculty]
on [dbo].[faculty]
after update
as
if exists (select * from inserted)
begin
update h
set h.faculty = f.faculty
from #tempfaculty h
inner join faculty f
on f.facultyId = h.facultyId
inner join inserted i
on f.facultyId = i.facultyid
end
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master UPDATE [dbname].dbo.table SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1 WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2 AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3 AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error: Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound. Msg 4104, Level 16, State 1, Line 2 The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
I have a temp table called #JOB which i know contains data (i can select from it and it shows about 30 rows). The problem is when i am trying to update another table with the contents of the temp table...........query analyser tells me no rows have been updated.
here is the code i am using:
UPDATE JOB SET JOB.JOB_REF = #JOB.JOB_REF FROM #JOB
Does anyone have any ideas where i am going wrong? Cheers in advance.
I am very new to SQL Server 2005. I have created a package to load data from a flat delimited file to a database table. The initial load has worked. However, in the future, I will have flat files used to update the table. Some of the records will need to be inserted and some will need to update existing rows. I am trying to do this from SSIS. However, I am very lost as to how to do this.
I think this is a very simple question, however, I don't know the answer. What is the difference between a regular Temp table and a Global Temp table? I need to create a temp table within an sp that all users will use. I want the table recreated each time someone accesses the sp, though, because some of the same info may need to be inserted and I don't want any PK errors.
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it. --no compilation error. CREATE PROC testTemp AS BEGIN INSERT INTO #tmp(dt) SELECT GETDATE() END
only on calling the proc does this give an execution error
Simple example: declare @tTable(col1 int) insert into @tTable(col1) values (1) select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION; SET TRANSACTION ISOLATION LEVEL SERIALIZABLE; SET XACT_ABORT ON; CREATE TABLE [dbo].[tmp_ms_xx_MyTable] ( [MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
The SP UserPersist_GetByCriteria does a "SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture", so why am I receiving this error when both tables have the same structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
I need to decide what is better to use: global temp table ( I can't use local one) or permanent table in SQL 2000 stored procedures. I extract data from linked server table and update several tables on our server. Those procedures scheduled to run every 3 hours.
Another question: for some reasons when I used global temp table, I wasn't able to schedule multi steps with every step executing one of the stored procedures.I think global temp tables should be visible to other stored procedures, right?
Hi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Hi, I wanna know is there any advantage of perf gain when using Derived Tables over Temp Tables, advice me which one is better to use. Can I create Indexes and Insert/Update records into Derived Tables.
Hi All,Hope someone can help me...Im trying to highlight the advantages of using table variables asapposed to temp tables within single scope.My manager seems to believe that table variables are not advantageousbecause they reside in memory.He also seems to believe that temp tables do not use memory...Does anyone know how SQL server could read data from a temp tablewithout passing the data contained therein through memory???Is this a valid advantage/disadvantage of table variables VS temptables?
In a previous post "Could #TempTable within SP cause lock on tempdb?" http://forums.microsoft.com/msdn/showpost.aspx?postid=2691763&siteid=1
It was obvious that we have to limit the use of #Temp table to a minimum. Let assume that some of the temp tables are really difficult to replace and we have to live with them.
Would it be easier on tempdb if the #TempTable is replaced by a table variable? Or do they all end up in tempdb?
I am querying a table in oracle, the server connection to the Oracle database is determined by a criteria. Though how can I put the results from the oracle query into a temp table ?
This is the code i'm using for the query:
DECLARE @cmd VARCHAR(500) declare @Year varchar(25) set @Year = '2006'
From last 1 week or so, i have been facing very strange problem with my sql server 2005s database which is configured and set on the hosting web server. Right now for managing my sql server 2005 database, i am using an web based Control Panel developed by my hosting company.
Problem i am facing is that, whenever i try to modify (i.e. add new columns) tables in the database, it gives me error saying that,
"There is already an object named 'PK_xxx_Temp' in the database. Could not create constraint. See previous errors. Source: .Net SqlClient Data Provider".
where xxx is the table name.
I have done quite a bit research on the problem and have also searched on the net for solution but still the problem persist.
HI ALL,iam creating a temporary table using following Stored procedure but when i complile the Stored procedure iam getting the following errorServer: Msg 2714, Level 16, State 1, Procedure SP!, Line 15There is already an object named '#TEMP2' in the database.the stored procedure is ALTER PROC SP1@SELECT VARCHAR(15)=NULL AS BEGIN IF @SELECT ='FOLDER'BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTER ENDELSE IF @SELECT='PAGE' BEGIN SELECT DISTINCT(HIERARCHY_ID),HIERARCHY_NAME,HIERARCHY_DESCRIPTION,HIERARCHY_PARENT_ID INTO #TEMP2 FROM BM_HIERARCHY_MASTEREND
Which one is better to use User Defined function or Temp Table?
I am working on SQL Server 2005, and I have a user defined function that returns a table. I need to run queries on this table.
I am not sure if I should run the function once and store the results in a temp table and run queries on the temp table or call the UDF multiple times. I am concerned about performance.
INSERT INTO ... SELECT ... FROM ... WHERE ... . . .
When I create procedure as above, I got error message which I list below: ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++ Server: Msg 207, Level 16, State 3, Procedure pro_order, Line 40 Invalid column name 'orid'. ++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++
Is this mean that I can not use identity in the #table?
Need a little help ...i am trying to create a temp table with a result set from a record query that yields, a two column multiple row resultset.
I would like to obtain the second column from the first result set and make that the first row in the first column of my temp table, then the first column from the second result set and make that the first row in the second column of my temp table, etc.
I.E
resultset:
color l number green l 0 blue l 1 red l 2 black l 3
TO #temptable
A l B 0 l blue 1 l red 2 l black
I have tried to do this
but yielded :
A l B 0 l NULL 1 l NULL 2 l NULL NULL l blue NULL l red NULL l black
Not exactly the results I need :( I would GREATLY appreciate any help!!!
