Upgrading Hard Drives, Best Way To Back Up And Restore SQL
Jul 20, 2005
I'm formatting my mirrored drives and installing a third drive for
raid 5 to add more space. I have backup exec. Can anyone tell me the
best way to backup SQL so I can be sure it will restore properly? I
was thinking of using imaging software and creating an image to a USB
2.0 hard drive. The DB is 80 gigs.
Thanks
NH
View 3 Replies
ADVERTISEMENT
Jul 30, 2001
Hi, I'm looking for a way to check the free space left on the hard drives and then if needed send an alert to notify when we need to free up some space. I played around with the performance monitor and realized I could do it that way but I think you would have to leave the performance monitor running all the time and I'm not sure if I want to do that. I also read about the xp_fixeddrives proc that displays how much free space is available but then I don't know what to do from there? Does anyone have any recommendations for the best way to do this.
View 3 Replies
View Related
Jul 16, 2007
I have a 75 GB hard drive and a 300 GB. I want to mirror the 75 to the 300 and use the extra space as data storage. Is this possible if I partition the 300 and then mirror the hard drives.
Thanks
View 5 Replies
View Related
Apr 24, 2006
Can't find anything on how to install to drives other than sys. I'm brand new to Servers and Databases in general and trying to learn. How do I get databases to install on drive partitions other than my main system drive?
View 5 Replies
View Related
Mar 14, 2008
We recently installed SQL Server 2005. The server has 3 drives. When I try to restore a database I can only access the C: drive. How do I make the D: and E: drives visible in the "locate folder" window?
View 5 Replies
View Related
Aug 9, 2006
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
View 10 Replies
View Related
Mar 14, 2008
How could i back and restore my MSSQL using a programmatic way throw asp.net. Also Can i use do an incremental back. Regards,IseL
View 7 Replies
View Related
Aug 11, 2006
Hi All,
I have a problem that I haven't been able to solve it. At the end I am confused I need some clarifications.
Background:
I am using full back up recovery plan. I am getting daily full back up and every 15 minutes log_back up. I created these back ups by using Database Maintenance option. However I have been trying to restore the log_back up, but I couldn't achieve it.
Question1- When I take log back up do I have to activate "Remove inactive entries from transaction log" or not??
Info: When the log back up was done it deletes the latest 4th one. I have done this without no reason. Should I keep like that or should I allow the files being deleted right away after transaction logs backed up?
Question2- I cannot restore the log files I don't know why? I have followed every description that I read. After I restored full back up with NOREOCVERY the database hangs out says "loading" but it doesn't do anything and when I try to restore it doesn't accept the latest log back up file and it urges me to put newer file than I have but ıt is only latest log back up that I have Why does this happen?
I am so confused. Please help me
:confused:
Thanks
LS
View 3 Replies
View Related
Jan 25, 2006
Everyone,
I simply would like to know if ER Diagrams (under Database -Diagrams) on SQL Server and removed once the database is updated via a backup and restore.
Thanks,
Saurav
View 1 Replies
View Related
Jul 10, 2006
I had to transfer my database from one server to another. Both are running SQL 2000. I backed the database up and moved it to the new server however when I try to do a restore I get the following message:
The media set for database "xxx' has 2 family members but only 1 are provided. RESTORE DATABASE is terminating abnormally.
I did some searching and found a couple of posts that mentioned something about the back up including 2 files.
My problem is that the machine I backed this up from crashed when it was shut down and would not reboot so all of the data and the original database do not exist. Is there any hope of restoring this database. It is pretty critical.
Thanks,
Melissa :-)
View 20 Replies
View Related
May 23, 2008
Hi i am backing up a database, copying it to a shared folder on a different computer on same LAN, then restoring it on the different computer.
it used to work fine untill last few weeks.
I have also tried robocopy to copy the files....doesnt works.
the backup is 90GB.
It reports, insufficient resources.
I have rebooted the different computer too.
View 1 Replies
View Related
Oct 1, 2007
Is it possible to uninstall SQL 2005 and reinstall SQL 2000 if I need to? I would obviously have a backup copy of the database(s) from the SQL 2000 version. If so, is this a major ordeal to perform?
View 5 Replies
View Related
Jan 29, 2007
Hi,
I backed my sql server database on Fri at 3:15pm and then tried importing some tables individually from a different database and but that didnt work out too good, so is there a way i can just restore particular tables from the backup.
any help will be appreciated.
regards,
Karen
View 4 Replies
View Related
May 18, 2007
I need to back up a production database on one server and then copy it to a test server wherel it will be restored. The problem is that I don't know where to move the file to on the production server before I restore it. Is there a special folder I need to copy the file to? I see a folder named ProgramFilesMicrosoft SQL Server but beyond that I have no idea where to copy the file so that it can be restored?
Can someone help me out please?
View 1 Replies
View Related
Jan 16, 2008
Hi I need for my hosting company to send my db that I have convert from SQL EXR.2005 to 2000 and send them a backup file.
I have back up it (task> backup )and sand it over they cant open (restore) it and I do not understand why
What did I do wrong? (this time:- )
Thanks assaf
View 1 Replies
View Related
Nov 6, 2007
I want to back up my database to a logical drive and restore it from this logical device. But I am unable to see my logical device through sql server management studio interface. I am able to back up to a logical device and restore it from logical device through T-SQL code. I am wondering how come I am unable to see my logical device from sql server management studio interface. Is there any way, I can solve this problem? Thanks in advance.
View 3 Replies
View Related
Aug 18, 2005
I want to give a facility to backup database restore database to the customer in my project.
Database is stored in sql server 2000.
From the website the browser can take backup by clicking BACKUP button and
restore database by clicking RESTORE button.
is it possiable in asp.net programatically ?
View 3 Replies
View Related
Feb 1, 2001
hi, I would like to know the correct reaction for a crash in both senarios.
First senario,
I made a full back up at 6 am , then scheduled sql server to make transaction log back up every 2 hours (8,10,12,2 pm,4,6,8) . If I have a crash at 12:30. How would I resotre the data in the first senario....Can I restore the full back up done at 6 am then restore the last transaction log backup ( which is 12 Noon ) . I am not sure If I need to resotre the whole tran from 6 am till the time it was crashed.
Second senario,
I made a full back up at 6 am, then scheduled sql server to make Incremental backup every 2 hours (8,10,12,2 pm,4,6,8) . If I have a crash at 3:00 pm. How would I resotre the data in the second senario. ....Do I restore the full backup at 6 am then restore each incremental backup backwords ( 2,12,10,8)
AS you can see, I am not sure how to deal with this issue, I do appreciate your feedback.
Best regards
Ahmed
View 1 Replies
View Related
Oct 22, 2007
I am maintaining a .net 1.0 asp.net web application that accesses a SQL server 2000 database. I need to backup the database and then restore it on a laptop. Currently it resides on a server. The problem is that on the server they are using sql server 2005. If I backup using 2005 and then try and restore this database using SQL server 2000 or 2005 on the laptop, I get an error message. "Too many backup devices specified for backup or restore; only 64 are allowed. RESTORE DATABASE is terminating abnormally.
What can I do to restore the database? Must it be backed up with SQL server 2000 and then restored with SQL Server 2005?
Please help!
View 1 Replies
View Related
Feb 12, 2007
Hello guys
My server crashed but luckily I was not able to get back my files with help of recovery software.
Now, all I have from the database are just sql server database primary data .mdf and sql server databaseTransaction Log Files .ldf. I need to restore these data back to sql server.
Please could someone tell me how to restore these two file types back to my sql sever 2007 database?
Thanks
netboy
View 3 Replies
View Related
Mar 22, 2007
Hello,
I have some C# (.NET 2.0) code that performs back-ups and also can perform restores of back-up files. I would like to validate the integrity of a file prior to initiating a restore operation. In other words, I want to know, before I try to restore, if the file is just a random file (picture, work doc, zipped backup, etc.) or if it is a valid SQL backup file.
Any help would be greatly appreciated.
Thanks,
hassiah
View 3 Replies
View Related
May 27, 2008
I am trying to restore database from network drive but
sql server 2005 express is giving error
"system.data.sqlclient.sqlErroratabase <dbname> cannot be opened due to inaccessible files
or insufficient memory or disk space (microsoft.sqlserver.express.smo)."
But when I restore database from "C:" or local drive it alows to do so.
Can anyone help.
View 5 Replies
View Related
Nov 15, 2006
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies
View Related
Apr 24, 2007
Hello,I'm trying to create a simple back up in the SQL Maintenance Plan that willmake a single back up copy of all database every night at 10 pm. I'd likethe previous nights file to be overwritten, so there will be only a singleback up file for each database (tape back up runs every night, so each daysback up will be saved on tape).Every night the maintenance plan makes a back up of all the databases to anew file with a datetime stamp, meaning the previous nights file stillexists. Even when I check "Remove files older than 22 hours" the previousnights file still exists. Is there any way to create a back up file withoutthe date time stamp so it overwrites the previous nights file?Thanks!Rick
View 5 Replies
View Related
May 14, 2015
New to Database Mirroring and I have a question about the Principal database server. I have a Database Mirroring setup configured for High-safety with automatic fail over mode using a witness.
When a fail over occurs because of a lost of communication between the principal and mirror, the mirror server takes on the roll of Principal. When communication is returned to the Principal server, at some point does the database that was the previous Principal database automatically go back to being the Principal server?
View 2 Replies
View Related
Jun 9, 2015
I need to run two reports each of A5 Size to run back to page and print on single A4 paper means in 1st half Sale bill will be printed and in second half Gate Pass Will Be Printed both report will be on same page and size and shape should be maintained. How to do it.
View 4 Replies
View Related
Jul 20, 2005
Hello,I am hoping you can help me with the following problem; I need to process the following steps every couple of hours in order to keep our Sql 2000 database a small as possible (the transaction log is 5x bigger than the db).1.back-up the entire database2.truncate the log3.shrink the log4.back-up once again.As you may have determined, I am relatively new to managing a sql server database and while I have found multiple articles online about the topics I need to accomplish, I cannot find any actual examples that explain where I input the coded used to accomplish the above-mentioned steps. I do understand the theory behind the steps I just do not know how to accomplish them!If you know of a well-documented tutorial, please point me in the right direction.Regards.
View 2 Replies
View Related
Feb 6, 2008
I am trying to run a program called NVivo7, which - when I install - also requires installation of SQL Server. Because my C drive is small (and nearly full), I am trying to run NVivo7 off my D drive, though SQL seems to install on C. Is it possible, do you think, to use 2 different drives in this way, or do both the program and the Server need to be on the same one? If so, is there any way to get them both on D?
View 3 Replies
View Related
Feb 21, 2007
So i'm not really new, but got a question. i've recently been looking to to the Western Digital Raptor Drives.
as far as performance, it's always been my understanding that the speed of the hard drive is just about always the bottle-neck of a computer. i'm currently running 2 stripped WD 500gb SATA drives for my SQL server (dual Xeon 2.8 with 2GB memory).
i'm thinking of upgarding to 4 WD Raptors (10k RPM) drives, the new 150GB models. anyone have an opionion? do you think i'll get a large performance increase?
the database that i run queries off of now is about 125 Million names, with about 80 fields in width. so it's rather large, and usally takes a fair abount of time to get my results back (we're talking anywhere from a minute, to half the day.)
do you think the raptors will slim that down significantly?
View 20 Replies
View Related
Nov 13, 2007
Hi,
Can someone help me, I installed SQL 2005 Enterpirse Editon on windows clustered servers. Then after the installation
I want to change the path of my DB logs but the problem was, I can not see the other drives. I can see only the drive where the DB was located. Is there any special configurations that should be done.
Thanks.
Russell
View 1 Replies
View Related
Apr 19, 2001
Ideally we'd like to configure our SQL cluster w/ the databases on one drive and the logs on another. Is this feasable in a cluster solution.. Will it basically just be 2 drives that are failed over vs. 1?
Thanks
View 1 Replies
View Related
Jul 13, 2000
Hi ,
We are having 4 sql7 servers. All are in network only.
serverA: drives c,d
serverB: drives c,e
serverC: drives c,d
serverD: drives c,d,f
Now my question i want map all the drives to each other. So that i can use the space wherever available, because in serverA i dont have space but in ServerC have lot of free space.
Can anyone pls tell me in detail how we have to map the drives.
Thanks
--Siva
View 2 Replies
View Related
Aug 6, 2001
Hi,
I mapped a drive on to my SQL Server box. It points to another server from the same domain. When I try to backup or restore a database, I can't see this mapped drive through my SQL Server. Even if I type the entire path, SQL Server wouldn't take it. I don't have a clue about why it is not working. Can anyone throw some light on this. Your help is grately appreciated.
Thanks,
Varma
View 2 Replies
View Related