I have this query that calculates the next possible shipping day, based on 3 conditions:
- It has to be a workingday (WORKTIMECONTROL: 1 workingday, 0 holiday) - marked green
- There might be extra days (@xdays) required by the process - marked blue
- Customer wants their goods to be shipped on special days - marked red:select TOP 1 Transdate
from WORKCALENDARDATE
where Transdate > @startday and WORKTIMECONTROL = 1 and DATEPART(WEEKDAY,TRANSDATE)-1 in (2,4) and
[code]...
So customer 123456 accepts shipping of goods only on tuesday and thursday as in the above example "... in (2,4)". Multiple shipping days means that the Subquery returns more than one record, which gives me a headache as I don't see how to integrate this portion into my query. I tried to use the stuff function as I formally need a result that can be provided that way; but the format is incorrect as it in varchar, while an array of integer is needed.
DATEPART(WEEKDAY,TRANSDATE)-1 in (select stuff((select ',' + CAST(DELIVERYDAY as nvarchar) from CollectiveShipment where custaccount = '123456'
for xml path('')),1,1,''))
I think it was Pat Phelan who posted a little trick here where he used the STUFF function to create a string fo values from a column without using a cursor.
I am starting a brand new project and I did my table design and I am awaiting a finalized requirements document to start coding and I thought I would spend a little time writing some code to autogenerate some generic one record at a time SELECT, INSERT,UPDATE and DELETE stored procedures. With the coming holiday things are getting quiet around here.
The code that is not working is listed below. It does not work. It returns Null. I suck.
DECLARE @column_names varchar(8000)
SET @column_names = ''
SELECT @column_names = STUFF(@column_names,LEN(@column_names),0,C.COLUMN_ NAME + ', ') FROM INFORMATION_SCHEMA.COLUMNS C WHERE TABLE_NAME = 'MyTable'
How do I create value from the dropdown list of each parameter within the "Define Query Parameters" box, which appears when I run a query/dataset from the "Data" tab of the SSRS Report Designer ?
It usually list all the "Parameter Name"s I defined, and has another column for "Parameter Value", but it always shows only <Null> or <Blank> even though I have assigned the report parameters with data (from a Query, not hard coded).
The parameter values work fine when in "Preview" mode, but it would be of convenience to have them during design time.
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
hi! i have one datatable with date and some more fields are there in that. i want to query to return values from a particular date to another date. how can i do this? please help me! thanks in advance!
create table tick ( ID bigint identity (1,1) primary key not null , price money not null )
and I want to know 3 things
Starting with ID = 1 through ID = (last) give me the low and high price (that satisfies the below WHERE clause), and the last ID WHERE high price - low price = 0.10 and the last ID (last) is the minimum ID to satisfy: high price - low price = 0.10
So the last ID will coincide with the record containing either the low or high price, the problem is you don't know which record in that range has the corresponding high/low price, it could be the first record or the 10,000th record.
I am thinking I need to create two summary tables, maybe calculate the min(ID) that goes down 0.01 then the min(ID) that goes down 0.02, etc... Then calculate the min(ID) that goes up 0.01 then up 0.02, etc..finally join against these two summary tables to figure out which combination of downSummary and upSummary have a difference of 0.10.
I have two columns, where I have the start and stop numbers (and each of them ordered asc). I would like to get a query that will tell me the missing range.
For example, after the first row, the second row is now 2617 and 3775. However, I would like to know the missing values, i.e. 2297 for start and 2616 for stop and so on as we go down the series. Thanks in advance to any help provided!
I have a field which is currently of the "date time" data type. i want to convert it to smalldatetime, but everytime I try, i get an error of the "The conversion from datetime data type to smalldatetime data type resulted in a smalldatetime overflow error. " sort.
I have tried to find the values which are out of the smalldatetime range, with the following query
SELECT *
FROM midmar
WHERE bday BETWEEN '01/01/1900' AND '06/05/2079'
Which doesn't quite work, and gives me values that are actually between those two values listed.
I have also tried having the WHERE clause read:
WHERE bday <'06/06/2079' AND
bday>'01/01/1900'
and that doesn't really work either.
What's going on? Is there likely another problem besides the structuring of my queries?
On a new project i need to create possible ranges between a specific interval.
suppose i have this main product:
main product : LY E67F
Also, in first level i have a table classify by Group depending on Intensity.
table group Group intensity AA 1120 AB 1400 BA 1800 BB 2240 CA 2800
I need to create these diferent options:
1 option : AAAB or AABA or AABB or AACA 2 option : ABBA or ABBB or ABCA 3 option : BABB or BACA or BBCA or beginning from the end 1.option CABB or CABA... or beginning from the middle 1.option BBBA or BBAB and so on.
I fact, i need to find all available options possibles to build article code, like a matrix.
Hoping someone may be able to help with a problem I'm having with SSRS parameters....
My report has 2 parameters - the User Id used to login to the application and the Department(s) within the organisation. Based upon the User's role, the user may have access to data for one or many Departments.
Thus, the first parameter needs to be set in code based upon the User's login, however, the range of the second parameter (i.e. the range of Departments that the user can access) is controlled by the value of the first parameter.
The second parameter is to appear as a drop-down of Departments to which the User has access.
The report is to be produced for the selected Department.
Are you able to advise how to restrict the range of values for the second parameter based upon the value of the first parameter?
We have a couple of tables that can have quite a bit of data each day prior to replication. Can we increase the default values for a table for each subscription? For example we have a table called table1 and on the sqlexpress client they could enter in 10000 rows a day, on table2 it's just 100 rows a day. How can we increase the values to where we do not get the error for table1 stating that the insert failed because it conflicted with the identity range check constraint. Thanks in advance.
I am in the midst of writing a query to return a range of product BIN LOCATIONS from a warehouse stock levels program.I know the start and end BIN LOCATIONS for the warehouse, e.g.: Start - #00000, and End - Z10000.However I cannot hard code these into the program, instead I want my operator to designate the first letter of both the start and end BINS locations, and then hit the 'go button'.Towards this end I have declared a couple of variables in my SQL, as follows -
Code: declare @strBin varchar(10) set @strBin = '' if @strBin = '' set @strBin = '#%'
declare @endBin varchar(10) if @endBin = '' set @endBin = 'z%'
My challenge is writing a relevant WHERE clause for my select statement, I have tried the following -
Code: where BINLOCAT.BINLABEL between @strBin and @endBin order by BINLOCAT.BINLABEL
Whilst the clause above does not cause any errors, neither does it return any results.My first thought is that the BETWEEN operator does not accept wildcards. But if this is correct then how do I go about allowing an operator to enter the start, and end BINS without typing the entire BIN string (e.g.: #00000)? I have tried >= @strBin and <= @endBin, but I am having a similar issue with no errors, and no data returned.
I have a table that stores Terminal ID, Product Name, Cost and Effective Date. I need to generate query that will produce record set with start effective date and end date based on terminal and product. Table has over million records. In example below you could see table structure/data and desired outcome.
SELECT fmc_terminal, fmc_date = CAST(d. fmc_date AS DATETIME) ,d.fmc_prodlnk, d. fmc_cost INTO #TestTable FROM ( SELECT 1, '2014-12-03 00:04:00.000','A', 2.25 UNION ALL
Hi! I have table with complex index on 5 fields. One of them is string filed. I want to implement some sort of filtering, by setting SetRange() in my SQLCeCommand. But i need to fileter only by one string field and to get the values starting with the input string value. I tried to use such code: ... command.SetRange(DbRangeOptions.Prefix, new object[] {null, null, null, "Com", null}, null); resultSet = cmd.ExecuteResultSet(ResultSetOptions.Scrollable); .... But it doesn't work. As a result i've got an empty result set. Usage of simple index on one field and setting the correspondent range will solve problem, but i can't have such index due to project restrictions. Is there any way to set prefix range only by one value of complex index? If not, please, explain me how does Prefix Range works.
Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code
SELECT SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT FROM Practice.ibvSalesByJob INNER JOIN Practice.idvJobType
[Code] ....
The second dataset then has the date code changed to
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01' AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The third
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01' AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The fourth
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.
SELECT SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT FROM Practice.ibvSalesByJob INNER JOIN Practice.idvJobType
[Code] ....
If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
I'm running under Windows Server 2000 datacenter sp4 with sql server 2000 Sp4
on 16GB Ram.
I enabled the /PAE in the boot.ini file and also enabled the AWE and set the SLQ Server maximum memory to 6144.
Do I need to include the /3GB switch in the boot.ini file?
I'm a little bit confused with the article found on the site. http://support.microsoft.com/default.aspx/kb/274750
Here are the lines.
Use of the /PAE switch in the Boot.ini and the AWE enable option in SQL Server allows SQL Server 2000 to utilize more than 4 GB memory. Without the /PAE switch SQL Server can only utilize up to 3 GB of memory. or-Use of the /3GB switch in the Boot.ini file allows SQL Server 2000 to use up to 3 GB of available memory.
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
hi.. guys this is simple for you guys how can i make ms access to display the current date in a col.... when i go to insert a new line i how can i make it so that its allready there? i dont have to type it??????
You might just be able to save me downloading and installing SQL Server French...
I'm having localization problems with some .NET code - and I might be able to solve the problem if I know how SQL is parsed in different locales. Say my table MyTable contains a float column FloatColumn. In English, I would say SELECT * FROM MyTable WHERE FloatColumn = 2.3
If my locale was, say for argument's sake, French, would I have to write SELECT * FROM MyTable WHERE FloatColumn = 2,3 ???
Overview. Machine data is fed into DOWNTIMELOG via a Cimplicity. I do not have the ability to change the way that it goes in. It contains the time that a machine has stopped and where the stoppage has occurred. Via a web page I want to give the operator the amount of time the machine stopped. From that they will provide some more detail. As they enter time, I need to subtract what they entered from the total (DOWNTIMELOG). That is the reason I created ENTERED_TIME. [PDNTOTAL_TEMP_VAL0] hold the total time for each stoppage, [TOTTIME] is intended to hold the value that has been accounted for. [DWNCATEGORY_TEMP_VAL0] holds the category and matches up with [DWNCATEGORY]. Also, I need to match Date and Shift. The problem is that DOWNTIMELOG does not capture shift. However, 1st shift occurs between 700 and 1500, 2nd shift occurs between 1500 and 2300, 3rd shift occurs between 2300 and 700. 3rd shift presents a problem as it occurs across 2 dates. Could someone please help me with a query that provides the net between the two tables that is matched by date, shift and category? CREATE TABLE [dbo].[DOWNTIMELOG] ( [timestamp] [datetime] NOT NULL , [DWNTIMESTAMP_VAL0] [varchar] (25) NULL , [UPTIMESTAMP_VAL0] [varchar] (25) NULL , [PDNHOUR_VAL0] [int] NULL , [PDNMIN_VAL0] [int] NULL , [PDNSEC_VAL0] [int] NULL , [PDNTOTAL_TEMP_VAL0] [int] NULL , [DWNMSG_TEMP_VAL0] [int] NULL , [DWNCATEGORY_TEMP_VAL0] [varchar] (50) NULL
Where can i learn about making the sql server execute task when a certain situation happens. Like lets say make the server delete all entrys older than 40 days? Or have a entry deleted automatically when a certain situation happens like lets say it take 4 votes and a entry get deleted how do i make it do that automatically
Hello,I need to be able to replace only the first occurance of a space characterin a column.Reason being is the data in the column I am trying to replace seems to haveumpteen space characters after each entry, so a simple replace functionwill replace all the spaces after it with what I want!I have thought of RTRIM to get rid of the spaces after and then replace, Ihave also thought of CHARINDEX to find the first occurance of a space andSTUFF to replace it.I have done my homework on these functions!But I am having trouble writing such a statement,I've never written a query which would use more then one function on onecolumn you see and I am getting confused!I'll tell you what I want to do in simple stepsReplace only the first found space in a name column, but then if a name hasa middle initial that will be a problem,Replace that with a dot.then concatanate '@emailaddress;@emailaddress2' after itso when SQLServer does the select it will bring back something likejoe.bloggs@emailaddress;emailaddressBut I guess I'd also need joe.n.bloggs@emailaddress;emailaddressThe data in the column looks like this at the momentjoe bloggsBut I guess there may come a time when we havejoe n bloggs, just to complicate things!What is your advice, and how do I write a query like thisI have been playing around with it in Query Analyser but as I said I amgetting confused and need some help if you don't mindThanks a lot to all who reply :-)RegardsJayne
For example if I make a column not null the SQL Script generated. Removes all indexes, keys, etc... than creates a temp tableThan moves the data into the temp tablethen deletes the old tablerenames the temp tableRecreate all the indexes, keys, etc... Is there a structure reason for it? Like now that the DB is being alerted that the column is not null it wants to re insert all the data so it can re-organize it? Because I can just write my own script to the effect of ALTER [TABLE] [COLUMN] PARAM TYPE NOT NULLone line of script that seemingly does the exact same thing.. So I'm just curious when I change a column to non null why doesn't it just generate a simple one liner?
This is probably for most of you a very basic question. My goal is to define in a seperate instance from application all infos related to DataSets and DataAdapters that are needed when connecting to a specific database. Why?
First, I would like to be able to have in a single instance everything needed when hooking to a SQL Server Express database and in an other everything needed when hooking to a SQL Server CE database. Then, from application, I would like to be able following a few basic configuration steps to choose from one or the other, or even both in specific cases.
Second, I want to be able to seperate Database related stuff from application so that I can re-use everything from any other application when needed.
I've read several books, articles on the subject and would like to have your opinion as several approaches were illustrated through them. What would you use for this:
how to get records using stuff keyword as above i want to query using where condition with where objid=1 and should frame output as Parking, Toll only 1 input parameter need to given.
I'm implementing merge replication between SQL CE and sql server 2005 SP2. Here is the problem I'm facing
I have dynamic filters on some tables like
Select * from table1 inner join table2
ON table1.field1 = table2.field3
and table2.flag = true
When table2 flag turns true then all the matching records in table1 should be returned to the subscriber.
But that is not happening. The filter does not return any records to the subscriber even though i see records when i run the query on the server. My take on this is the publisher thinks there is no changes on table1 so there is nothing to update. So to fix that i run dummy updates like
update table1
set [name] = [name]
where table1.field1 in
(Select field2 from table2 where flag=true)
This updates the records and the publisher updates the subscriber the first time. When i set the flag to false, it is supposed to remove the data from the subscriber but i get this error.
The merge process failed because it detected a mismatch between the replication metadata of the two replicas, such that some changes could be lost leading to non-convergence. This could be due to the subscriber not having synchronized within the retention period, or because of one of the replicas being restored to a backup older than retention period, or because of the publisher performing more aggressive cleanup on articles of type download-only and articles with partition_options = 3. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199363) Get help: http://help/MSSQL_REPL-2147199363
The common generation watermark is invalid at this replica since it does not exist or metadata for changes not yet propagated may have been cleaned up. (Source: MSSQLServer, Error number: 21800) Get help: http://help/21800
I have no idea whats going on. Any clues, anyone? Thanks for your help.
