Use Case To Dtermine Which Field
Jul 19, 2006
have a select statement which needs to apply some logic to determine which fields to use. If the modify_timestamp = create_timestamp, then I want to use a location field from patient_medication table. If the modify_timestamp and create_timestamp are not equal, I need to use the location field from a location table. So my select would be
select account_id,ndc,startdate -- and then my logic.
Am I correct that you can't use a case for this? Is there a better approach?
View 1 Replies
ADVERTISEMENT
Mar 15, 2007
Hello,
I have the following problem. Presum I have a field called contact_mail. I want to check if the field is empty.
If that is true then i want to get the faxnumber from a field called contact_fax . And then i want to put @faxmaker.com behind it in a new field called faxmail.
Something like this contact_fax:123456 - faxmail:123456@faxmaker.com.
I've made the following case.
CASE contact_mail
WHEN 'NULL' THEN 'contact_fax@faxmaker.com'
END AS faxmail
But this doesn't work, does anyone got a hint?
View 10 Replies
View Related
Jun 19, 2006
I want to specify the data in columns are both upper & lower case(i.e. one column data having all lowercase data or uppercase data ).
Ex:- if i have one column - col1 and its
1st value is RAKESH JHA
2nd value is rakesh jha
then how i can find that, how much row are in upper case. respectively lower case
View 3 Replies
View Related
Jun 7, 2014
Is there an easy way to send back to my C# program the pascal case of a field type? If you get the parameters or columns for a table or procedure the type is in all lowercase (varchar instead of VarChar). But in C#, it is in an enum (SqlDbType) that has the variables as mixed case so you can't compare them and just pass the type. You need to figure out what the case should be - varchar should be VarChar and bigint should be BigInt.
View 1 Replies
View Related
Dec 7, 2004
I've this Stored procedure on a SQLserver 2000 SP3:
SELECT *,CASE immagine WHEN NULL THEN 0 ELSE 1 END AS hasImage
FROM Squadre WHERE squadra = @squadra
this is a flag that returns if the image field is present or not..
i've a lot of this type of stored procedures.. but this one returns me an error..
---------------------------
Microsoft SQL-DMO (ODBC SQLState: 42000)
---------------------------
Errore 306: The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator.
---------------------------
OK
---------------------------
An i can't save.. why?
reme,ber that in the same Db there's other Stored like this.. the same syntax and the same field or table.. can anyone help me??
View 2 Replies
View Related
Jun 19, 2008
Dear all,
I am using sql server 2005.
I have two field firstname and lastname. Actual requirment is if category is doctor then display name as Dr. name else name but when I use following sql stament
Whenever one of the name is null it show name as null that is whenever firstname or lastname is null I get name as null
select @DOCNAME = CASE
WHEN DR_CUST_CATEGORY = 1 THEN 'Dr.' + ' ' + dr_cust_name + dr_cust_lastname
ELSE dr_cust_name + dr_cust_lastname
END FROM DOCTOR_MASTER WHERE DR_CUST_DOCTORCODE =@DOCCODE
Please suggest some ideas or any other idea please suggest
Thank you.
View 1 Replies
View Related
Jan 22, 2008
Hello Experts,
I tried to retreive an input column using GetVirtualInputColumnByName, to map it with output, it gave error. I found that it is because the value passed bstrName parameter was in different case. say for example in the column it is "ColNo1" where as in the GetVirtualInputColumnByName i used "Colno1".
Can anyone tell, Is there anyway to find the column in a case in-sensitive way?
Thanks.
View 1 Replies
View Related
May 20, 2004
When I created a CASE statement (This is at work, Pat:)) it is about 30-40 lines long. I gave it a name and set the name = to the case statement:
ie,
SELECT fieldname1 =
CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END
, fieldname2
, fieldname3
FROM tablename1
GROUP BY CASE
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
WHEN condition THEN 'blah blah'
ELSE thisandthat
END, , fieldname2, fieldname3
etc.
The long CASE statement in my GROUP BY is awkward to me. Is this the only way to do it? I tried using the fieldname1 but it comes back as an invalid field name and asks for the "expression".
Regards,
Dave
View 5 Replies
View Related
Oct 27, 2015
I have a field called PPH and this field type float. so, this field could be null, 0.0, or values. I am using case statement:
[PPH] = case when h.HoursFloat = 0 then 0 else
round(s.Pledges / h.HoursFloat,2) end,
I am trying to add where if h.HourFloat is null then 0 but, it does not work. I have tried different ways such as
[PPH] = CASE isnull (h.HoursFloat,0)
when 0 then 0 else ....
How to add another condition to check on null then 0.
View 9 Replies
View Related
Jan 14, 2007
Hi,
SELECT UserID, UserName, Password, PublisherID, CurrencyFROM [User]WHERE (Password = 'Anitha') I am using the above mentioned it is working but int the password field i had given it as anitha. Now the querry is retriving the record for anitha, it shouldnot happen. The querry should retrive the record of anitha only for where condition anitha and not for Anitha or ANITHA etc..
Thanks
Vishwanath
View 4 Replies
View Related
Jul 20, 2005
Hi,I am trying to convert string entered in a field to uppercase usingits formula property.I know it can be done using trigger but still I want to use formulaproperty to achieve the same.Any help will be greatly appreciated.-Max
View 3 Replies
View Related
Apr 9, 2014
Is this a correct syntax to populate a field name PHONES in my CUSTOMERS TABLE
case when(d.phone = (SELECT phone from CALLS where exists(select home_phone, mobile, toll_free from CALLS2) Then 1 END 'PHONES'
View 1 Replies
View Related
Aug 21, 2007
I am trying to order by the field and direction as provided by input parameters @COLTOSORTBY and @DIR while using a CTE and assigning Row_Number, but am running into syntax errors.
Say I have a table called myTable with columns col1,col2,col3,
Here's what I'm trying to do
with myCTE AS
(
Select
col1
,col2
,col3
,row_number() over (order by
case when(@DIR = 'ASC') then
case when @COLTOSORTBY='col1' then col1 asc
when @COLTOSORTBY='col2' then col2 asc
else col3 asc
end
else
case when @COLTOSORTBY='col1' then col1 desc
when @COLTOSORTBY='col2' then col2 desc
else col3 desc
end
end
from myTable
)
Please let me know what i can do with minimal code repetition and achive my goal of dynamically sorting column and direction. I do not want to use dynamic SQL under any circumstance.
Thanks.
View 7 Replies
View Related
Oct 28, 2015
I am trying to script a case when to achieve the following.
I have a table of measures with certain threshold. The threshold direction can either be > or < so I want to create a field that shows if the measure hits that threshold or not to be later picked up in SSRS. So a nested case when?
CASE WHEN M.[Threshold Direction] = '>' THEN
CASE WHEN A.[Value] > M.[Threshold] THEN 'GREEN'
CASE WHEN A.[Value] < M.[Threshold] THEN 'RED'
ELSE ''
END END END AS 'Condition'Is this at all possible?
View 2 Replies
View Related
Aug 31, 2015
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies
View Related
Jan 6, 2005
Hello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
View 4 Replies
View Related
May 4, 2007
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
View 3 Replies
View Related
Aug 17, 2005
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies
View Related
May 29, 2008
I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
View 5 Replies
View Related
May 4, 2015
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies
View Related
Aug 19, 2007
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies
View Related
Nov 5, 2007
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
View 1 Replies
View Related
Sep 6, 2007
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
View 2 Replies
View Related
Jul 20, 2005
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies
View Related
Aug 25, 2015
I'm new to SQL and I'm trying to write a statement to satisfy the following:
If [Field1] contains text from [Field2] then return [Field3] as [Field4].
I had two tables where there were no matching keys. I did a cross apply and am now trying to parse out the description to build the key.
View 8 Replies
View Related
May 4, 2006
Good morning...
I begin with SQL, I would like to add a field that will be date like 21/01/2000.
Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.
How to do for having date and time in two different field.
Sorry for my english....
Cordially
A newbie
View 3 Replies
View Related
Jul 11, 2005
I'm using DTS to import data from an Access memo field into a SQL Server ntext field. DTS is only importing the first 255 characters of the memo field and truncating the rest.I'd appreciate any insights into what may be causing this problem, and what I can do about it.Thanks in advance for any help!
View 4 Replies
View Related
Dec 30, 2003
I need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits.
The mfg_start_date is delcared as a string variable
mfg_start_date = CStr(CDate(Mid(rs_get_msp_info(2), 3, 2) & "/" & Mid(rs_get_msp_info(2), 5, 2) & "/" & Mid(rs_get_msp_info(2), 1, 2)))
option 1
I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
With refresh_shipping_sched
.ActiveConnection = CurrentProject.Connection
.CommandText = "spRefresh_shipping_sched"
.CommandType = adCmdStoredProc
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
.Parameters.Append .CreateParameter("@option", adInteger, adParamInput, 4, update_option)
.Parameters.Append .CreateParameter("@mfg_ord_num", adChar, adParamInput, mfg_ord_num_length, "")
.Parameters.Append .CreateParameter("@mfg_start_date", adChar, adParamInput, 10, "")
Set rs_refresh_shipping_sched = .Execute
End
Please help
View 6 Replies
View Related
May 17, 2015
I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE" .
How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?
I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)
**all of the above returned text objectes in excel and not date objects.
View 3 Replies
View Related
Oct 17, 2007
I am trying to drag data from Informix to Sql Server. When I kick off the package
using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP
errors on two fields from Informix which are date data ....no timestamp part
I tried a couple of things:
Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.
Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them
as datetime but it failed.
What options do I have that will work?
View 1 Replies
View Related
Jul 23, 2005
Hi ,Have a Visual C++ app that use odbc to access sql server database.Doing a select to get value of binary field and bind a char to thatfield as follows , field in database in binary(16)char lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_C_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);and this works fine , however trying to move codebase to UNICODE antested the followingWCHAR lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_W_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);but only returns 1/2 the data .Any ideas , thoughts this would work fine , nit sure why loosing dataAll ideas welcome.JOhn
View 2 Replies
View Related
Nov 17, 2012
DECLARE @datetimeoffset datetimeoffset(3)
DECLARE @datetime datetime
SELECT @datetimeoffset = '2012-11-08T17:22:13.575+00:00'
SELECT @datetime = @datetimeoffset
SELECT @datetimeoffset AS '@datetimeoffset ', @datetime AS 'datetime'
__________________________________________________ ___________
Result of above SQL is
@datetimeoffset datetime
2012-11-08 17:22:13.575 +00:002012-11-08 17:22:13.577
__________________________________________________ ____________
The result should be '2012-11-08 17:22:13.575', why the milliseconds value is incorrect
View 2 Replies
View Related
Feb 20, 2007
Hi,another problem I have is that have compounded fields in my sql table.Exampleproduct@customerI need a simple function to return "customer", so it should return the valueafter "@", unfortunate "@" will sometimes be character number 6, sometimescharacter number 7 etc.regardsJorgen
View 1 Replies
View Related
