When I try to give a login access to a database I get the message:
Error 21002: [SQL-DMO] users already exist in the database.
I checked sysusers for the database and the users name is in there, even if the user has no login.
Is it okay to just delete the record that has the users name from sysusers?
Thanks
I need to determine the following about the current authenticated Windows domain user who is trying to access a SQL Server via a trusted connection.
1 Has the current user been granted login access to the trusted SQL Server?
2 Has the current user been granted access to a specific database?
3 Is the current user a member of a specific database role such as (DB_ROLE_ADMINISTRATORS)?
Thanks,
Sean
Downloaded and install SQL 2005 on 2003 member server. Downloaded and ran SQLServerSamples.msi, AdventureWorksBI.msi, AdventureWorksDB.msi, and AdventureWorksLT.msi.
When I go into Sql Server Management Studio I cannot find the Adventure Works database under databases. How do I access it?
Thank you.
Hi All,
My question is regarding SQL Server database security. I want to create a login using SQL Server Authentication and assign it db_owner rights for my database. So far so good. But the critical part is that I want to give exclusive rights for my database to this user only i.e. no other users (dbo, guest etc) should be allowed to access my database.
It will be good to present here the scenario which I need to implement. I am running an ASP.NET application that uses SQL server 2005 db at back end. The database server might have other databases as well but I don't want the administrator (either SQL server admin or the server administrator) to be able to get access to my database or even view the schema. I don't want any other user except my own user to be able to detach the database or perform backup or restore operations.
I hope I was able to deliver the requirement.
Please help....
I have designed an application that uses sql server 2005 express database. This application was intended to be installed and used on a local desktop machine. However, now this application needs to be also installed on several computers and still needs to use only 1 database. Part of the database saves local user settings, so what I have done thus far is use two connection strings: one for local database (because the application may be used as origionally intended) and one for remote database that everyone should be able to connect to.
When I remotely connect to the database, it works fine. However, it seems to be locked so when I chose the same database for another user I get the error message "This File Is In Use." I need to know how to unlock it and make it usable for several users at the same time.
Thank you for your help! Please let me know if you need more information or if something is unclear in my description.
I am newbie to SQL.I need to create an application will run on server, and of course will be installed by using admin user. I can use the install user to access to database on that server?
View 1 Replies View RelatedHi friends,
I have created a database DB1 using CREATE DATABASE DB1 command. Then i created login name using CREATE LOGIN login1 WITH PASSWORD = 'password1' command and created user name using CREATE USER user1 FOR LOGIN login1 command. Now i have to assign the user1 to the database DB1.
Any one please tell me how to assign DB1 access privilege to user1?
Thanks in Advance
Sathish kumar D
Hi,
How do I create a user that has full access to a database using only SQL statements?
I've create very basic database called "sampledb".
Then I've done:
CREATE LOGIN sampleuser WITH PASSWORD = '123sampleuser', DEFAULT_DATABASE = sampledb;
USE sampledb;
CREATE sampleuser FOR LOGIN sampleuser WITH DEFAULT_SCHEMA = 'db_owner';
Then I logon to SQL server express 2005 management studio using this user, first of all I do not see the sampledb database listed under "databases" even though it is selected in the "available databases" toolbar (how do I list it there? Because going through "attach..." tells me I do not have the privileges to browse for the database to attach).
I then open up a new query (sampledb is selected), and type (products is one of the table in sampledb):
select * from products;
And I get:
Msg 229, Level 14, State 5, Line 1
The SELECT permission was denied on the object 'Products', database 'sampledb', schema 'dbo'.
Shouldn't the chosen schema (db_owner) give me the right to do this? And how do I fix this from the query window (without going through the GUI, just using SQL statements)? And how do I list sampledb under the databases when I log in as this user?
Thank you!
-Yannick
Hi,
I am using SQL Server Express Edition 2005 as a backend database working with Visual Basic 2005.
I am using Vista and having two users to access to my computer. User-1 and User-2.
I created a database in User-1 and works fine Visual Basic 2005.
Now the problem is when i login to my computer system with User-2. I cannot able to access the database with encountering error like "User-1/SQLExpress". I know that i cannot able to access to database which was created in User-1.
Do you any solution to this problem. when i login with user-1 and user-2 it should able to access database.
Thanks.
Regards
Kashif Chotu
/* -------------------------------------------------
The Following Procedure Helps You To
Send a Messge to all Users
those Who Access a Specified Database in a Server
*/
Create Proc Sp_SendMsg
@Msg Varchar(100),
@DbName VarChar(100)
as
if db_id(@DbName) = Null
begin
Print 'DataBase dose not Exist'
end
else
Begin
Declare @spId Varchar(1000)
DECLARE TmpCursor CURSOR FOR
Select 'master..xp_CmdShell ''Net Send ' + rtrim(convert(Varchar(50), HostName))+' "Dear ' + upper(max(rtrim(loginame)))+ space(1) + @Msg + '"''' as spId
from master..SysProcesses
where db_Name(dbID) = @DbName and
spId <> @@SpId
and rtrim(ltrim(HostName)) <> ''
and HostName <> host_Name()
and dbID <> 0
and spId > 50
group by HostName
OPEN TmpCursor
FETCH NEXT FROM TmpCursor
INTO @spId
WHILE @@FETCH_STATUS = 0
BEGIN
Exec (@spId)
FETCH NEXT FROM TmpCursor
INTO @spId
END
CLOSE TmpCursor
DEALLOCATE TmpCursor
end
Dear All,
I want my SQL database to be accessed always in a single user mode through my application. How can I do this ?
Thanks in advance.
Sushma
Currently there are various teams accessing the database. For costing reasons, we need to track usage.Is there an efficient way to monitor User access to the database.Can we track which user has executed which query(SELECT,insert etc),the login time and such parammeters?
View 5 Replies View Related
Hi all,
I have a SSIS package that copies data from one database, into another, makes a backup, and then FTP's up the backup to a web server. In Sql Server I've made a job to run the package and a Stored procedure to activate the job from an Access database front-end.
Can anyone tell me how I might return a success/failure message to my access user?
Thanks
Melt
I'm trying to grant a user group select access to all the views in a database. I already made a query which creates a result set whit the SQL Syntax I (displayed below) need but it seems to be impossible to get this result set executed after creation.
use [AdventureWorksDW2008R2]
SELECT
'GRANT SELECT ON [' + SCHEMA_NAME(Schema_id) + '].[' + name + '] TO [DOMAINGROUP]'
FROM sys.views;
How do I grant a user permissions to only one table in a database. How would it affect him using our Main App which is NAV with regards to his user's permission in NAV
View 2 Replies View RelatedI have a restriced user on SQL Server that is only permitted to creat a new database and manage it only. All other database are hidden to that user.
when that user login to SQL Server and create a database and try to change the default folder path for data and log files, gets an error,
The Server principal "User" is not able to access the database "model" under the current security context. (MSSQL Server, Error: 916)
Any idea???
Thanks,
someone was alter user databases owner access.
how to find who alter evoke the database user access changes in sql server.
Hi, I hope you can help.I have configured a Windows 2003 web server and SQL 2005 Server (on same box) to successfully allow remote connections and to allow access via SQL Server Management Studio Express 2005.The problem I have is that I want to restrict access to the databases on the server via the Management Studio to specific databases e.g. 1 database user "sees" only 1 database.I can configure it so that the user's remote access permissions do not allow access to other databases but they can still "see" the database listed in the Management Studio explorer.I can also configure it so that the users cannot see all the databases (by disabling View All Databases on SQL Server), but this means that they cannot not see their own database which they have permissions for.Is it impossible to have the desired behaviour of only displaying the database which the remote user accessing has permissions for and hiding all other databases?I have MSN'd,Googled and Yahoo'd this one to no avail :(Many thanksFergus
View 6 Replies View RelatedHi,
How would I set permission for SQL Server 2005 "User A" to prevent access to System and other user databases, also How to hide the databases that "User A" has no rights to. I mean, when User A logs in, All other user databases are not visible to him/her.
Thanks,
We are using Crystal Report Services XI to generate reports from SQL Server 2000 database running on server within the same domain (LAN).
for some reason, SQL Server is rejecting the Credentials that is provided to CR Services, the user has right to that database. When We run the report manual, it works fine, but when we run Automatic on schedule , it fails.
The Authentication mode is set to Mixed.
The Startup Service accoutn is set to "This Account"
Any idea, why would this failure on User is encoutered.
Thanks,
I would like to know if there is a way to find out who changed a users roles/access WITHOUT using the audit function. For example, if a user account was created and given SA access then changed to read only, how can I find out who made that change? I tried searching for an answer, but kept getting no results. I'm thinking this may tie into the sys.sysusers view?
View 3 Replies View RelatedI would like the Backup SQL user A can backup and restore DATABASE_a, what access right I need to grant to him. Although he can backup the database_a to the c:Program Files.....Database_a.BAK but he cannot restore it with some message said ''not enough security privieges..
Please quote some example right assigment so that I can replicate to our environment
Many Thanks...
Hi guys,
I've been developing desktop client-server and web apps and have used Access and SQL Server Standard most of the time.
I'm looking into using SQL CE, and had a few questions that I can't seem to get a clear picture on:
- The documentation for CE says that it supports 256 simultaneous connections and offers the Isolation levels, Transactions, Locking, etc with a 4GB DB. But most people say that CE is strictly a single-user DB and should not be used as a DB Server.
Could CE be extended for use as a multi-user DB Server by creating a custom server such as a .NET Remoting Server hosted through a Windows Service (or any other custom host) on a machine whereby the CE DB would run in-process with this server on the machine which would then be accessed by multiple users from multiple machines??
Clients PCs -> Server PC hosting Remoting Service -> ADO.NET -> SQL CE
- and further more can we use Enterprise Services (Serviced Components) to connect to SQL CE and further extend this model to offer a pure high-quality DB Server?
Clients PCs -> Server PC hosting Remoting Service -> Enterprise Services -> ADO.NET -> SQL CE
Seems quite doable to me, but I may be wrong..please let me know either ways
Thanks,
CP
Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:
1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt
ssrs2014
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
We have been asked to look into using stored procedures with SQL Server 7.0 as a way to speed up a clients site. 99% of all the articles I have read along with all the books all say Stored Procedure should be used whenever possible as opposed to putting the SQL in your ASP script. However one of my colleagues has been speaking to Microsoft and they said that that they were surprised that our client wanted to use Stored Procedures as this was the old method of database access and that now he should really consider using COM objects for data access as itis much faster. Has anyone got any views on this or know of any good aticles regarding this matter ?
View 1 Replies View Related
Hi there,
I want to create database login and set that login to owner of the database? Can anyone help me?
thanks
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.
I can run the report in preview mode from bits on the sql 2008 r2 server.
I have tested the connection of the deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.
I can logon to sql express 2012 using management studio and logon as the user and access the database run stored procedures etc.
windows server 2003, sql server 2008 R2 reporting services server.
windows server 2012 sql express 2012 data source database location.
Hi,
I'm sorry if this is simple, I'm no DBA but have been tasked with solving this problem...
We have a website that connects via ODBC to SQL Server (2k sp1) and at the moment I am getting back about every other time:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open user default database. Login failed.
So this is NOT happening every single time. Now I have seen Microsoft KB - 307864 and I can see that none of the databases are marked as suspect, the database I am trying to connect to does exist and is attached and, I have run the command to switch the database to multi-user mode.
The probable cause of this problem is that a while ago we had a hard-drive failure and I was forced to reattach some old datafiles (mdf,ldf) as the database. This seemed ok and I can view data etc in enterprise manager no problem.
I have checked for orphaned users and the user I am logging in with from the webpage is not listed.
So does anyone have a clue as to why this is happening, and more frustratingly for me, why is it only happening some of the time.
Thanks for your help, appreciated.
James.
I am using SharePoint Services 3.0 (SP1) with default configuration options, which installs the Microsoft##SSEE instance of SQL to my local C: drive.
While attempting to relocate the files to another drive, I set one of the databases (as recommended) to Single User by using the SQL Server Management Express tool.
I cannot now reset that database to Multi User, even by executing the query
exec sp_dboption 'database_name', 'single user', ''FALSE'
again by using the Management Express Tool.
Can someone please help, in plain english???? Thanks
Hello,
We have a new production server with SQLserver 2005.
Our department responsible ofr the installation made it as secure as possible, however.
I have to put a new backup on to the server from the old production server.
We ran into a problem when we removed the old database.
I could not longer logon to the server with an authenticated user.
"A connection was successfully established with the server, but an error occured during the login process"
"Shared memory provider : error 0 : No process is on the other end of the pipe"
Strange thing is when i create a new database with the same name. The user can logon to the server again.
Any idea's ?
Jurgen