i'm using DTS to copy one database into a new database, copying over everything, i.e. stored procedures, views, etc.. not just the tables.. how long should it take? it's been stuck at 22% now for about 15 minutes?
thanks
My company is considering purchasing MS SQL Server to run anapplication on (SASIxp). I am mainly familiar with Oracle, so I waswondering how long it would take to copy a database. Basically we havedatabase A and each night we want to replace database B with thecontents of A. How long would this take say if we had a 10GB databaseor a 20GB database.What would be the technique to do this nightly, the Copy DatabaseWizard, Snapshot Replication, Attach & Detach...? We need to automatethis process, and the source database can be made unavailable whenthis happens.Thanks,Roger
View 2 Replies View RelatedHi, I have some SSIS Deployment Manifest Files that needs to be copied over into another server. I am just using the Package installation wizard to do this. But it is taking to long to run.( I have 19 simple packages and it is taking 15 minutes).
Is there any way that I can use to achieve better performance in this?
Hi,
I set up DB mirror between a primary (SQL1) and a mirror (SQL2); no witness. I have a problem when I issue command:
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
The error message is:
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy of the database log.
I have the steps below prior to the command. (Note that both servers' service accounts use the same domain account. The domain account I login to do db mirror setup is a member of the local admin group.)
1. backup database DBmirrorTest on SQL1
2. backup database log
3. copy db and log backup files to SQL2
4. restore db with norecovery
5. restore log with norecovery
6. create endpoints on both SQL1 and SQL2
CREATE ENDPOINT [Mirroring]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER)
7. enable mirror on mirror server SQL2
:connect SQL2
alter database DBmirrorTest
Set Partner = N'TCP://SQL1.mycom.com:5022';
go
8. Enable mirror on primary server SQL1
:connect SQL1
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
This is where I got the error.
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy
Thanks for any help,
KT
Hello,
if i have a given database (a model) and i want to copy this database in the same database instance. Is it ok to copy the mdf and ldf file and attach the files with a new database name in the same instance.
Or is the datebase name part of the .mdf file?
Regards
Markus
Hello I am a software developer with minimal SQL server administration skills. Currently I am using SQL Server 2000.I need to know if there is a way to copy a particular table from a database, and to copy the table into a different database.Basically on a project I am working on we are using a table named "Customers" from a database named QTR. We need to copy this database table into a different database named "Research". How can this be done? Is if very complicated?
View 1 Replies View RelatedI made a website in ASP.net and using sql server 2005 as database. There is sometime processing data that need long time processing ( about 20 minutes ) and big data. It works fine in dev box, but when I place on shared hosting, and some people access it crashed. The website can not be accessed. Hosting support told me maybe I need to reprogram my code. So anybody has solution for this problem ? Should I create new thread ?
View 3 Replies View RelatedHey I was wondering if you
all could help me with my database. I am very noobish as databasing and I am
not sure what I have is good or bad. This is very long since I tell you basically
what my whole site does/will do. This is in hopes that it will give you a
better understanding of how many database will work.
Japanese WebSite
Purpose of the site:
This sites intention is to help people learn the 2 basic
Japanese character sets Hiragana and Katakana.
Hiragana is usually used for Japanese words and contains 46 basic characters,
plus a set of special characters. Katakana is usually used for foreign words
and also contains 46 basic characters plus a special set of characters.
Hiragana and Katakana are written differently when they are written with Japanese
characters. However if you right them in romaji (this is basically writing words
as if you where writing English and does not involve using characters. This is
used for foreigners while they are learning how to write the Japanese
characters).
Hiragana and Katakana are pronounced exactly the same.
This site will use a quiz style format. The user will first choose from the set
of Hiragana characters then the Katakana characters. Once chosen the website
will randomly choose a character and display the Japanese symbol of it. The user will then write the romaji
representation in the text box provided.
It will be then checked
and if the user is right they will get a new symbol. If they are wrong they
will have try again. The purpose for
this is for the user to get use to see how the character looks like but at the
same time writing in romaji what will be easier for them. This should make it
easier for them the next time they see the character to know how to say it.
Version 1
The site will go through many versions. This version I am
focusing on using C#,asp and ms sql. Later on in future versions ajax and
javascrip will be introduced and parts will be changed. Version 1 also uses CSS
and html.
Version 1 will contain these features.
1. A
practice section. A user will go through a wizard like setup that will first
let them choose from the basic 46 Hiragana characters (the other special
characters will be added later). They will then go to the next setup and choose
from the 46 basic Katanana characters. After they go to another section that
asks them how many repetitions they want to go through. If the user is a member(free membership) they
will have the option to save their settings that will be stored and later
available on the front page called quick links. The next page of the wizard is
actually going through the quiz. Once they are done they will see a summary of
how many they got right,wrong and how many they needed assistance on. At this
point they will be able to view a chart to see their progress(current chart
showing there last attempt, a week one
and a month one). These charts will be either made using c# or ms sql(I saw a
something that says you can make something like that but have not confirmed
it). I may do both ways for a learning experience.
2. A Registration form, login and logout.
3. Quick
link. Quick link will be for registered members so they don’t have to go
through the wizard every time to make their practice quiz up. A user will go
through the wizard once and choose what they want and save it. Quick link will be on all the pages in the
form of mostly likely a grid view. A user will be able to store 3-5 different quiz’s
(in the future maybe more). A user can then click on the quick link and it will
just take them to the quiz. The user will also will be able to update their
quiz through the grid view. This will take them to the start of the wizard and
they can go through it again and then just save over it. They will also be able
to delete there quick links through the grid view.
Currently done
Half of step 1 has been completed. Currently a user can
go through the wizard and select what they want and choose how many repetitions
and go through the quiz. However the summary and charts are not done.
Future versions.
Design will be a major part of it since I have not
focused on this at all. Also since I wanted to experiment with dynamic controls
I made all the checkboxes for the selections dynamically. This caused a problem
that a user must hit a save button since the controls have to get recreated and
updated.
I think normally this might not have been a problem but
since I since I am using a multiview(to create a effect that the wizard is all
on the same page and not the whole page has to be reloaded) it caused some
problems(I can’t really remember since it was a couple months ago when I
started but had to stop due to the amount of school work). This is why I want
to go back later and make them with ajax. This also makes another learning
experience.
Where I am at now.
When I started this I really did not think much of my
database mainly because I am not good at data basing and don’t really like it that
much. I have had a course in data basing (was with oracle though)that was part
of my program. At the time I did not understand very much since I found the
teacher going too fast and he started at chapter 8….. Also when you got 7 other
courses with it it’s hard to learn lots.
I have gone through some tutorials and stuff. I am not
very keen on reading a database book since I just don’t have the time since I
want to also read a book on c#, javascript, ajax and so forth. Also I don’t
know how much I will retain/learn from a book. With some of the stuff I just
find its better to try to something where you will be interested in and then
when needed read chapters of a book or ask questions. This is what I done for my c# stuff like I
had a c# with asp course and 2 months after the courses I started this site and
I had to ask myself what the heck did I learn in that course since it seemed I
knew nothing(and I was close to top in my class). With pounding it out and
reading I was able to accomplish what I needed. Like I still want to read a
book on C# but for now it’s just not going to happen same with Data basing.
All the pervious information was so you can understand
what my website is trying to do so you can better evaluate my database design
and answer my questions.
First Design of my
database.
This is when I just made it up on the spot and did not do
any database design or anything.
Question 1: I
forgot how to limit select query results. Like If I just want to show 10 query
results how do I do this?
I have currently 2 tables How one called Hiragana and the
other Called Katakana
HiraganaID = PK
HiraganaID HiraganaCharacter HiraganaImage
----------- -----------------
--------------------------------------------------
1 a Images/hiragana/a-o/a.jpg
2 i Images/hiragana/a-o/i.jpg
3 u Images/hiragana/a-o/u.jpg
4 e Images/hiragana/a-o/e.jpg
5 o Images/hiragana/a-o/o.jpg
6 ka Images/hiragana/ka-ko/ka.jpg
Katakana
KataKanaID = PK
KatakanaID KatakanaCharacter KatakanaImage
-----------
-------------------------------------------------- --------------------------------------------------
1 chk_Kata_a
Images/katakana/a-o/a.jpg
2 chk_Kata_i
Images/katakana/a-o/i.jpg
3 chk_Kata_u Images/katakana/a-o/u.jpg
4 chk_Kata_e
Images/katakana/a-o/e.jpg
5
chk_Kata_o
Images/katakana/a-o/o.jpg
I quickly found that this design was very bad since I was
unable to add new rows very easily. Each character set has each of its characters
in rows of 5. Some rows however have only 3 romaji characters so what they do
is leave the other cells blank representing that they don’t exist. I wanted to
do this too so I figured the easier way would be to have just null rows of
data. So say for “ya,yu,yo� it would be like this “ya,null,yu,null,o�. That’s
how it would appear in the database so when my c# would read it in it would not
have to account for rows that had less than 5 characters since it would have
already the nulls for it.
You can check a chart out here: http://www.alpha.ac.jp/japanese/img/moji.gif
So with this poor design it would result me in basically
rewriting the database.
I have thought of 2 possible ways to. I am not sure if
either way is good but I will try to explain my reasoning as much as I can.
Possible Way 1
In this approach I have 5 tables.
Hiragana
This table stores all the information about Hiragana
Characters
CREATE TABLE [dbo].[Hiragana](
[HiraganaID] [int] IDENTITY(1,1) NOT NULL,
[HiraganaCharacter] [varchar](5) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[HiraganaImage] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[SortOrder] [numeric](3, 0) NOT NULL,
CONSTRAINT [PK_Hiragana] PRIMARY
KEY CLUSTERED
Katakana
This table stores all the information about Katakana
Characters
CREATE TABLE [dbo].[Katakana](
[KatakanaID] [int] IDENTITY(1,1) NOT NULL,
[KatakanaCharacter] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[KatakanaImage] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[SortOrder] [numeric](3, 0) NOT NULL,
CONSTRAINT [PK_Katakana] PRIMARY
KEY CLUSTERED
Quick Links
This table will store the users quick link information.
CREATE TABLE [dbo].[QuickLinks](
[QuickLinkName] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL,
[UserID] [int] NOT NULL,
[SavedCharacters] [varchar](200) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL,
[SavedImagePaths] [varchar](200) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
Users
This will store login information.
CREATE TABLE [dbo].[Users](
[UserID] [int] IDENTITY(1,1) NOT NULL,
[UserName] [varchar](30) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL,
[EmailAddress] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Password] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NOT NULL,
[DateTimeStamp] [smalldatetime] NOT
NULL,
CONSTRAINT [PK_Users] PRIMARY
KEY CLUSTERED
Charts
This will store all information that will be used for
charts.
CREATE TABLE [dbo].[Charts](
[PracticeNum] [int] IDENTITY(1,1) NOT NULL,
[UserID] [int] NOT NULL,
[Correct] [numeric](3, 0) NOT NULL,
[Wrong] [numeric](3, 0) NOT NULL,
[AssitanceNeeded] [numeric](3, 0) NOT NULL,
[TimeDateStamp] [smalldatetime] NOT
NULL,
CONSTRAINT
[PK_Charts] PRIMARY KEY
CLUSTERED
(
Relationships
Users and QucikLinks have a PK to FK relationship this is
because quicklinks is dependent on the user having a user account. It also away
to identify which QuickLinks will belong to who.
Question 2: Currently I don’t have a primary Key for this
table what would be a good primary key for this table?
QuickLinks also does not have any relationship to either
to HiraganaCharacters or Katakana Characters. This is because I did not feel it
was necessary to grab the information from here. I simply could just grab it
from the array that holds this information from my c# code.
Question 3: How can I make this table for all users? Like
Say they choose 5 characters and save it as QuickLink1(as the
QuickLinkName). Should each of these 5
characters gets its own line or should it all be saved in one row? Or should I
even have another table to hold this data?
Option 1
QuickLinkName UserID
SavedCharacters SavedImagePaths
---------------- ----------- ------------------- --------------------------
QuickLink1 1 a image/a.jpg
QuickLink1 1 i image/i.jpg
QuickLink1 1 u image/u.jpg
QuickLink1 1 e image/e.jpg
QuickLink1 1 o image/o.jpg
QuickLink1 2 a image/a.jpg
QuickLink1 2 ya image/ya.jpg
QuickLink1 2 ki image/ki.jpg
QuickLink1 2 yo image/yo.jpg
QuickLink1 2 n image/n.jpg
Option 2
QuickLinkName UserID
SavedCharacters SavedImagePaths
---------------- ----------- ------------------- --------------------------
QuickLink1 1 a,i,u,e,o image/a.jpg, image/i.jpg,
image/u.jpg, image/e.jpg,
image/o.jpg,
QuickLink2 2 a,ya,ki,yo,n image/a.jpg,
image/ya.jpg,
image/ki.jpg, image/yo.jpg,
image/n.jpg,
Charts table also has a Relationship with Users
The thinking for this one is that Charts will use the
UserID to tell who this data belongs too. It will store the number of correct
answers, wrong answers and AssitanceNeed. This table will also hold a timeDateStamp.
The reason for this is because I want to have a chart that displays the last
Quiz they did and also the stats of a week’s worth of quizzes, and month’s
worth of quiz’s. With a timeDateStamp I should be able to add up all those columns
and then display them for whatever period I choose.
Second Possible
Way.
Characters
CREATE TABLE [dbo].[Chracters](
[CharacterID] [int] NOT NULL,
[CharacterName] [varchar](5) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[CharacterPath] [varchar](50) COLLATE
SQL_Latin1_General_CP1_CI_AS NULL,
[SortOrder] [numeric](3, 0) NOT NULL,
CONSTRAINT [PK_Chracters] PRIMARY
KEY CLUSTERED
This way uses 4 charts instead of 5. The main difference
is that the Hiragana Charts and Katakana Charts have been merged into one
table.
This way has another relationship between Characters and
Quick Links. This will store the Character
ID instead of the actual Characters and Path through the use of C# code. When a
user selects a box it will make a note of the CharacterID. When it is time for
the user to use the QuickLink it will join the tables together and filter out
the CharacterIDs. Giving me the CharacterName and Path.
The problem with this way is that well the code I written
will need to be changed since currently it grabs stuff from 2 tables into one.
I don’t know if this would save anytime over the first way either.
I hope these are sort of close to an alright design since
I did try to think about how my website would interact with the database.
Sorry for it being so long.
Summary of Questions
Question 1: I
forgot how to limit select query results. Like If I just want to show 10 query
results how do I do this?
Question 2: Currently I don’t have a primary Key for this
table what would be a good primary key for this table?
Question 3: How can I make this table for all users? Like
Say they choose 5 characters and save it as QuickLink1(as the
QuickLinkName). Should each of these 5
characters gets its own line or should it all be saved in one row? Or should I
even have another table to hold this data?
I had a database of electronic resources which had 28000 records earlies and was working fine. Now we have added a whole bunch to make it 800K records which has increased the search time to 14-22 seconds which is not acceptable. I have all the tables indexed.
Please help me how to solve this problem. Let me know what other information I should put up here to make my problem undestandable.
Thanks in advance,
Archana
I have a database with 2 almost identical tables.
Each one is about 1.2 Billion rows, 0.5 Tb each.
I've truncated one of them and started SHRINK DB WITH REORGANIZE PAGES
It is running already for 3 days.
When should I start to worry :)
Thank you in advance
I am try to start with SQL BROKER service,
When I lunch from sql Management studio the following query, this don't finish never.
ALTER DATATABLE dbname SET ENABLE_BROKER
Where I am mistaking ?
When I import data from MS Access databases, some fields appear as
"<Long Text>" in SQL. I cannot edit these fields in SQL. I have to export
the table to Access, update the field, and then import again.
There's got to be an easier way. What am I missing here?
The field in Access is of type 'memo'.
Hi All,
I'm trying to rebuild my master database for sql server 2000. The process of rebuilding stared fine. But it is almost 4 hours since it got started. Performing it on a test system. Got doubtful and started the same on another test system. Issue is same and it is almost 2 hours. The Db size is less than 100 MB in both cases. IS IT NORMAL? I've tried the same for SQL SERVER 2005 and it got finished in couple of minutes. Please advise.
HiI have have two linked SQL Servers and I am trying to get remote writesworking correctly (fast).I have configured the DB link on both machines to:Point at each others DB.I have security set up to map each others server loginsand Server Options: Collation Compatible, Data Access, RPC, RPC Out, UseRemote Collation all checkedMy problem is that when a SP performsBegin TransactionUpdate Local TableUpdate Remote TableCommit TranIt takes several seconds to complete. (about 7 seconds not acceptable tous)This is due to the remote update - how can I improve the response time?example of a stored procedures that takes timewhere ACSMSM is a remote (linked) SQL Server.procedure [psm].ams_Update_VFE@strResult varchar(8) = 'Failure' output,@strErrorDesc varchar(512) = 'SP Not Executed' output,@strVFEID varchar(16),@strDescription varchar(64),@strVFEVirtualRoot varchar(255),@strVFEPhysicalRoot varchar(255),@strAuditPath varchar(255),@strDefaultBranding varchar(16),@strIPAddress varchar(23)asdeclare @strStep varchar(32)declare @trancount intSet XACT_ABORT ONset @trancount = @@trancountset @strStep = 'Start of Stored Proc'if (@trancount = 0)BEGIN TRANSACTION mytranelsesave tran mytran/* start insert sp code here */set @strStep = 'Write VFE to MSM'updateACSMSM.msmprim.msm.VFECONFIGsetDESCRIPTION = @strDescription,VFEVIRTUALROOT = @strVFEVirtualRoot,VFEPHYSICALROOT = @strVFEPhysicalRoot,AUDITPATH = @strAuditPath,DEFAULTBRANDING = @strDefaultBranding,IPADDRESS = @strIPAddresswhereVFEID = @strVFEID;set @strStep = 'Write VFE to PSM'updateACSPSM.psmprim.psm.VFECONFIGsetDESCRIPTION = @strDescription,VFEVIRTUALROOT = @strVFEVirtualRoot,VFEPHYSICALROOT = @strVFEPhysicalRoot,AUDITPATH = @strAuditPath,DEFAULTBRANDING = @strDefaultBranding,IPADDRESS = @strIPAddresswhereVFEID = @strVFEID/* end insert sp code here */if (@@error <> 0)beginrollback tran mytranset @strResult = 'Failure'set @strErrorDesc = 'Fail @ Step :' + @strStep + ' Error : ' + @@Errorreturn -1969endelsebeginset @strResult = 'Success'set @strErrorDesc = ''end-- commit tran if we started itif (@trancount = 0)commit tranreturn 0
View 2 Replies View RelatedI have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?
Hi guys,
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
Cheers
I'm using SQL Server Management Studio Express and I'm trying to figure out how to copy a table(s) from my local database to my web hosting database. I know how to do it in 2000, but it's completely different now. Is this feature not allowed on SSMSE? If so, then how do I deploy database tables to a web host?Also, how do you add local database(s) to SSMSE? I tried to use 'attach database' in SSMSE and it wouldn't allow me to navigate to My Documents folder where the database resides. Thanks...
View 8 Replies View RelatedWe have 3 maintenance jobs configured in this particular DB instance:
Daily backup of system database - SubPlan1 (Check Database Integrity Task --> Rebuild Index Task-->Backup Database Task)Daily backup of user databases - Five subplans for each task : (Check DB integrity --> Rebuild Index -->Backup User Database, Backup Log -->Cleanup History)Weekly maintenance - SubPlan1 (Check Database integrity job (system+user DB)Â + rebuild index job (system+user DB) )
PROBLEM: I just noticed that the User DB Rebuild Index task has been running since the 03/04 and the Weekly maintenance plan - subplan1 since the 12/04.
Which job is "safe" to stop without impacting the database?
If I want to copy the data from Table1 in Database A to Table2 in
Database B but Table1 column name is code , Table 2 column name is
vesselcode.
(Code = vesselcode)
How to copy all data from Table1 in Database A to Table2 in Database B ?
Do I need to write the SQL statment ? and Can I use Server Enterprise
Manager Tool?Thx a lot.
Hello,I need to copy a table from an 8i oracle database to a sqlserver 2000 database.Is it possible to use the command "COPY FROM ... TO ..." ?So, what is the correct syntax ?Thanks for your helpCyril
View 1 Replies View RelatedHi,
I have a complicated sql server mobile database (.sdf) and need to create a SQL SERVER database with the same tables. How can I do it without scripting the whole thing? I thought of using the views.information_schema databases, but it is still a lot of coding.
thanks
hii want to copy one database table to onther database table using script?my database is ms-sql server 2000
View 4 Replies View Relatedi have an database created with MSDE using the windows authentication,
and now i want to send this database to someone, can i just backup this
database and send it,
can other people access my database with windows authenticaiton in his computer ??? or i need to do some extra stuff???
Running SQL 2000 and need to copy an entire database (structure and data) from our inhouse development server to our 'live' server at our hosting co. What's the best solution? I can't do it directly because both machines are behind firewalls or course.
Thanks in advance!
Jim
I am pretty new to SQL Server 7.0 and am having a problem. I have two databases, both on seperate SQL Servers. The problem I am having is I have a copy of one and a backup of the other. I need both of these to be restored into a third SQL Server I have locally. None of these Servers see each other so I can't register them. All I have to work with is the Backup and the copy. Can someone tell me how to accomplish this. I have tried to do restore and import.
Thanks so much in advance for any help.
What is the best method to copy databases among all the options.
* bcp
* sp_detach and attach
* DTS
* Back up from source restore to destination
Hi,
What is the quickest and easiest way to make a copy of an entire database ie. create a test environment from production?
Thanks in advance,
Darrin
Hi,
I have to make a copy of my db with all users/passowrds/views/sp...etc to same server with diff.name.
What is the best way to do this and how long will it take to transfer around 5gb of data.
Thanks
How can you copy a database from one server to another without taking it down?
I know I can detach the database and then copy it thru the file system, but how can it be done with the database running?
Thanks
what would be the best way to copy a database from one server to another.
Thanks.
I wanted copy a database from one server to another server.So far I'm doing this is by detaching and attaching the DB.But when i tried to restore the DB on the new server its giving some error. Is't a good process to detach and attach.PLease let me know if there is any better way of doing this.
View 5 Replies View RelatedI need to move a database from sql 2000 to sql 2005. My research suggests that I can backup a sql 2000 db from enterprise manager and restore it with sql 2005 management studio. Are there step by step directions for this or can someone tell me how to do this?
what about logins? Are they transfered in this process. My research also suggests the I use copy database wizard by this failed on me and I can't find anything in the event log or anywhere else to tell me why. Please help. Thanks
when i'm copying my database from one server to another server the package is faling with the follwoing errors
Step Error Source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Step Error Description:[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'mmmservicestart'.
Step Error code: 80004005
Step Error Help File:SQLDMO80.hlp
Step Error Help Context ID:700
What is the exact problem with these errors and what should i do to overcome this.Can anyone help me in this regard.
Thanks.