Using Select Statement Result In If Statement Please Help

Jul 11, 2007

Hello

How can i say this I would like my if statement to say:  if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.

<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>

<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"

ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">

<SelectParameters>

<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />

</SelectParameters>

</asp:SqlDataSource>any help would be appreciated

View 2 Replies


ADVERTISEMENT

Different Result Of Each Select Statement

Mar 14, 2008

Hi, I execute a select statement

SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'

every times I execute it I get different result.

1st result : 17036986
2nd result : 17037903
3rd result : 17038309

Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.

View 18 Replies View Related

Get Numeric Result From SELECT Statement

Jun 11, 2008

Hi,I have this code following my signature to SELECT a number.I don't know what am I missing, because it always return the number which the variable banID was initialized (32 in this case).The strangest thing is that if I run the statement inside MS SQL SERVER, I get the right result.Any help would be appreciated.Warm Regards,Mário Gamito--// Get inserted user IDint banID = 32 ;SqlConnection myConn = new SqlConnection("Data Source=192.168.1.6; Initial Catalog=db1; User=sa; Password=secret");try{myConn.Open()}catch (Exception e){Console.WriteLine(e.ToString());}try{SqlCommand myCommand = new SqlCommand("SELECT MAX(PublisherID) FROM table1", myConn);banID = Convert.ToInt32(myCommand.ExecuteScalar);}catch (Exception e){ Console.WriteLine(e.ToString());}Response.Write(banID);

View 3 Replies View Related

How To Encrypt Result Of Select Statement

Jun 6, 2012

I want to export the data from a database and place it on a csv file to be imported to another database. However, I want some columns from the selected data (result of select statement) to be encrypted. What should I do? Is this possible? How do you decrypt the data during import?

The original data is from an MS SQL database to be transferred to a PostgreSQL database.

MS SQL ----- CSV (some columns are encrypted) ---- PostgreSQL (all columns decrypted)

I posted the same question on the mysql category. I wanted to delete it since I just realized today that I posted it on the wrong category but seems like there is no way I can delete.

View 2 Replies View Related

Aggregate Function For Select Statement Result?

Oct 19, 2004

Ok, for a bunch of cleanup that i am doing with one of my Portal Modules, i need to do some pretty wikid conversions from multi-view/stored procedure calls and put them in less spid calls.

currently, we have a web graph that is hitting the sql server some 60+ times with data queries, and lets just say, thats not good. so far i have every bit of data that i need in a pretty complex sql call, now there is only one thing left to do.

Problem:
i need to call an aggregate count on the results of another aggregate function (sum) with a group by.

*ex: select count(select sum(Sales) from ActSales Group by SalesDate) from ActSales


This is seriously hurting me, because from everything i have tried, i keep getting an error at the second select in that statement. is there anotherway without using views or stored procedures to do this? i want to imbed this into my mega sql statement so i am only hitting the server up with one spid.

thanks,
Tom Anderson
Software Engineer
Custom Business Solutions

View 3 Replies View Related

UPDATE Records In 1 Table With Result Of Select Statement

Jun 12, 2014

I want to update records in 1 table with the result of a select statement.

The table is called 'MPR_Portfolio_Transactions' and contains the following fields:

[PTR_SEQUENCE]
,[PTR_DATE]
,[PTR_SYMBOL]
,[PTR_QUANTITY]
,[PTR_ACUM]

And the select statement is like this:

SELECT SUM(PTR_QUANTITY) OVER (PARTITION BY PTR_SYMBOL ORDER BY PTR_DATE, PTR_SEQUENCE) AS 'ACUMULADO'
FROM MPR_portfolio_transactions
ORDER BY PTR_SYMBOL, PTR_DATE, PTR_SEQUENCE

This select statement generates one line per existing record. And what I would like to do next is to UPDATE the field 'PTR_ACUM' with the result of the 'ACUMULADO'

the key is PTR_SEQUENCE

View 3 Replies View Related

How To Write A SELECT Statement And Store The Result In A Session Variable

Nov 6, 2007

I'm sure this is a very simple piece of code, but I'm having trouble understanding how to do this.
First I have a database with three columns


ContactID

View 1 Replies View Related

Can A Column Be Derived Using Substring But The Parameters Are A Result Of A Select Statement?

Apr 6, 2007

I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.









Table 1

Org

aaa:aaa:aa

aaa:aaa:ab

aaa:aab:aa








Table 2














delim

Seg1Start

Seg1Len

Seg2Start

Seg2Len

Seg3Start

Seg3Len


:

1

3

5

3

9

2



My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.



Any ideas? Can this be done in SSIS?



I'd really appreciate any insight that anyone might have.



Regards,

Bill

View 23 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:


SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)


it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly.  My problem is that the table I am pulling data from is mainly foreign keys.  So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys.  I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit.  I run the "test query" and everything I need shows up as I want it.  I then go back to the gridview and change the fields which are foreign keys to templates.  When I edit the templates I bind the field that contains the string value of the given foreign key to the template.  This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value.  So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors.  I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode.  I make my changes and then select "update."  When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing.  The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work.  When I remove all of my JOIN's and go back to foreign keys and one table the update works again.  Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People].  My WHERE is based on a control that I use to select a person from a drop down list.  If I run the test query for the update while setting up my data source the query will update the record in the database.  It is when I try to make the update from the gridview that the data is not changed.  If anything is not clear please let me know and I will clarify as much as I can.  This is my first project using ASP and working with databases so I am completely learning as I go.  I took some database courses in college but I have never interacted with them with a web based front end.  Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian 

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:


Field01 Field02

------------- ----------------------

192473 8461760

192474 22810



Because other reasons. I need to modify that query to:



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810


Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies View Related

Using Result Of A Select Statement From One Table To Add Data To A Different Table.

Mar 17, 2008

I have two table with some identical fields and I am trying to populate one of the tables with a row that has been selected from the other table.Is there some standard code that I can use to take the selected row and input the data into the appropriate fields in the other table? 

View 3 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

Using Result Of SQL Statement

Apr 21, 2008

Hi,

What I would like to do is run a select statement, and then have the result of the select be used/run thru the same select again untill it hits a certain where clause.

This is for a where used search in our BOM (Bill of Material) table.

So for example

BOM 1

level 1 Item# 123 type Finished Good
level 2 Item# 45 type subassembly
level 3 Item# 56 type purchased item


BOM 2

level 1 Item# 678 type Finished Good
level 2 Item# 78 type subassembly
level 3 Item#56 type purchased item


So my input into the select statement would be Item# 56, it will then first find Item# 45 and Item# 78, but those I am not interested in. I want the select to then take Item#45 and Item#78 and run it thru the same select so that it will find Item#123 and Item#678.

The select will know to stop there since these are flagged as "Finished Good" in our system, so they will not be in any other BOM. This is what I would imagine being specified in the "where clause".

I can write the first part, where the select will find Item #45 and Item#78, but don't know how to get past that point.

Any help or suggestions are greatly appreciated!!

Thanks,
Michiel

View 14 Replies View Related

How Can I Get The Result Of A SQL PRINT Statement

Nov 5, 2003

I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long.

I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result.

I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.

View 7 Replies View Related

The Statement Did Not Return A Result Set

Oct 28, 2007

I am using MSSQL 2000, SQL Server Developer Edition and product version is : 8.00.760 (SP3)

Application Server: JBoss v 4.0.4
Driver : sql 2005 driver.

Hi,

I am running my application in JBOSS and hibernate to do all the query to the DB. While we are testing our application, it is working fine for the 1st day of stress testing, however after running for one days, it starts throwing the following exception. This can occur in a number of method call with no fixed pattern. Anyone has any idea what is going on?

used by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.loader.Loader.doList(Loader.java:2148)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2029)
at org.hibernate.loader.Loader.list(Loader.java:2024)
at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:392)
at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:333)
at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1114)
at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79)
at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:756)
at org.hibernate.ejb.QueryImpl.getSingleResult(QueryImpl.java:63)
... 88 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:236)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1669)
at org.hibernate.loader.Loader.doQuery(Loader.java:662)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224)
at org.hibernate.loader.Loader.doList(Loader.java:2145)
... 97 more

View 2 Replies View Related

Execute Same Statement For Each Value In Result Set

Jul 23, 2005

Hi everyone,My brain refuses to remember the (undocumented?) stored procedure I'mthinking of. It takes at least two parameters: a sql statement toexecute, and a table name (or something of that nature).Then, for each value in the table, it executes the sql statement andpasses the value as a parameter.Can anybody refresh my memory? The functionality may be slighlydifferent than described, but the principle is the same. Thanks verymuch...-Joe

View 3 Replies View Related

Update Statement Works Ok But No Result

Nov 24, 2005

here is my update statement in a stored procedure:

create proc proc_add_comp
    @comp_answer nvarchar(300),
    @admin nvarchar(100),
    @comp_id int
as

update tbComp set
   
comp_answer = comp_answer + ' - ' + @admin + ', ' + @comp_answer

where comp_id=@comp_id

then I try it like this :
exec proc_add_comp 'new answer','by me',1

result is : (1 row(s) affected)

but when I look in the db, nothing was changed, comp_answer still has its old value..
comp_answer is nvarchar type column..isnt add operation allowed in update statement?
thanks...

View 1 Replies View Related

Wrong Result In Query Statement How To Fix?!!

Nov 2, 2004

The query is (Select (25/20*100))
The wrong giving result is 100 it's should be 125
How I can use a query statement to get a correct result?

View 4 Replies View Related

How To Pass Result From Case Statement To An Equation?

Dec 28, 2007

How to get the CASE results highlighted in BOLD into this equation; "(LogOut - LogIn) + (LunchBreak) -(AMBreak)  + (PMBreak)  AS TimeWorked" ?
Thank you.
CREATE VIEW dbo.vwu_ReportViewASSELECT   EmployeeID  , LastName  , FirstName  , LocationCode  , UserID  , Today  , Login  , AMBreakOut  , AMBreakIn            , CASE  WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 19    THEN '0'  WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 34    THEN '15'  WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 49    THEN '30'  WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) > = 50 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 64    THEN '45'  ELSE '60' END AS AMBreak , LunchOut             , LunchIn            , CASE  WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0)  >= 0 AND ISNULL(DATEDIFF(Minute,  LunchOut, LunchIn),0) <= 66    THEN '0'  WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0)  >= 67 AND ISNULL(DATEDIFF(Minute,  LunchOut, LunchIn),0) <= 81    THEN '15'  WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0)  >= 82 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 96    THEN '30'  WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0)  >= 97  AND ISNULL(DATEDIFF(Minute,  LunchOut, LunchIn),0) <= 111    THEN '45'  WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0)  >= 112 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 126    THEN '60'  ELSE '75' END AS LunchBreak, PMBreakOut , PMBreakIn            , CASE  WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 19    THEN '0'  WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 34    THEN '15'  WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 49    THEN '30'  WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 50 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 64    THEN '45'  ELSE '60' END AS PMBreak , Logout , Comments , LoginLogon , AMBreakOutLogon , AMBreakInLogon , LunchOutLogon , LunchInLogon , PMBreakOutLogon , PMBreakInLogon , LogoutLogon             ,(LogOut - LogIn) + (LunchBreak) -(AMBreak)  + (PMBreak)  AS TimeWorked 

View 7 Replies View Related

How To Saving DBCC Statement &#39;s Result Into Table?

Jan 3, 2001

Hi all,
I want to save DBCC's result into a table to execute my statement but I don't know how to, exmple for DBCC OPENTRAN (my database) - how can I put SPID & UID to my variable from this statement?
Thanks in advance
Happy New Year
PTH

View 1 Replies View Related

How To Page SQL Query Result Returned From FOR XML Statement?

Apr 25, 2006

Gurus.I do not know if it is possible, but here is what I want to do.I want to allow user to page the SQL result, so he could decides toreturn from row 10 to row 20, or row 100 to 200, without returns thewhole resultset. Every time he sends another request, I do not mind tohit the database again, (I do not want to cache the result in themiddle tier server, scalability issue), and I know that I could achievethis with CURSOR, but unfortunately the FOR XML is not allowed in aCURSOR statement .(I know that I could achieve what I want to do by writing custom codein the middle tier, but I just want to see if there is a way to do thison the database side.)Any comments & suggestion is greatly appreciated.Thanks in advance.(I am using SQL2005)John

View 2 Replies View Related

SQLServerException: The Statement Did Not Return A Result Set When Sp Uses Cursors

Jun 8, 2007

I'm trying to migrate to the 2005 JDBC driver against SQL Server 2000, but I'm getting the following exception: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set. This is similar problem to a past thread: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=413019&SiteID=1
The difference is that my stored procedure uses cursors. This same stored procedure works fine with the 2000 JDBC driver.

Does anybody have any ideas how to resolve this problem?

View 14 Replies View Related

Get Insert Statement Result In Creating A Trigger

Feb 1, 2008

Hi,

When a record is to be inserted, how can I check whether the insert is succeeded or not?


CREATE TRIGGER MY_TRIGGER ON MyTable AFTER INSERT
AS
DECLARE @id INT
DECLARE @name NVARCHAR(50)
SELECT @id=id,@name=name FROM INSERTED
BEGIN

INSERT INTO MySubTable(id,name) VALUES(@id,@name)
-- if failed, rollback
END
GO
GO

View 3 Replies View Related

Using IF...Else Statement SELECT Statement

Sep 7, 2006

 

Hi All,

Can some one point me in the right direction in how to construct my SQL query within my cursor?

I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using  both tables ID's Like So:

SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id  


 so for each row  my cursor checks if there is a corresponding match in  table2... but i would like to write to an error log

and do other statements if there is no match

 how do i add this condition to my statement either using an if...else statement proceeding to the next row?

here is the statment i attempted to write:

SELECT column_List
FROM table1
WHERE
 Table1_id = Table2.id

now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id    


IF  table1.id <> table2.id    

BEGIN
   SET @DebugMessage = 'data not live.'
   RAISERROR (@DebugMessage, 16, 1) WITH LOG
  END

essentially what i am trying to sayin my statement is:

 go to the first row

check if it has a match in table 2,

 if there is no match execute a number of statements such as error loging e.t.c

go to the next row

 repeat the previous statements 

 

...i also looked through some Case...When statements am just not sure how to put in the condition

thanks in advance

 

View 1 Replies View Related

Can INSERT Statement Also Return All Columns Inserted As Result Set

Jun 2, 2014

Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?

View 3 Replies View Related

Calculated Column Based On Case Statement Result

Dec 10, 2013

I'm new to SQL Server and would like to add a calculated column to this query from the report writer in our ERP system based on the NextFreq case statement result.

Basically, I want to create a column called service with result as follows:

If IV.meter > NextFreq then the result should be 'OVERDUE'
If (NextFreq - IV.meter) <50 then the result should be 'DUE SOON'
Otherwise the result should be 'NOT DUE'

This is the code from the current report writer query:

Select IV.item, IV.meter, isnull(wt.name,0)as name, case when whh.meterstop is null then 0 end meterstop, whh.rejected, Case when cast(meterstop as int) > 0 then cast(meterstop as int) when meterstop is null then isnull(IV.meter,0) else isnull(IV.meter,0) end EndMeter, ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) as LastFreq,
case when whh.rejected = 1 then ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) when ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) = 0 then 100 when ISNULL(CAST(SUBSTRING(wt.name,1,4)as int),0) = 100

[Code] ....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved