Hi
I want to use the following sql code in a report textbox:
len(replace(substring(fc.effectivitycalendar,(pos_follow,pos_modified - Pos_follow)+1),'-',' '))
How can I do this?
Greetings
Avecinna
HiI have a character field, varchar(60), and I want to replace only a partof it, a set substring which is always in the same set positions.Does anyone have an Sql statement or algorithm/sp that could do thatwith one call or run ?ThanksDavid
View 3 Replies View RelatedHello All,I have a sql statement that I'm using to match records on. But i needto use a substring to get the nuber that I need, and I have to useseveral substrings to get the number since its embedded in other text.Here's my sql:use fto_upsselect distinct o.Shipper#, o.InvoiceDate, o.InvoiceNumber, o.ChgType,o.Lading, o.BillTo, o.Name2, o.Address1, o.Address2, o.City, o.State,o.Zip,o.ShipFromName1, o.ShipFromeName2, o.ShipFromAddress1,o.ShipFromAddess2, o.ShipFromCity, o.ShipFromState, o.ShipFromZip,o.PickupDate,o.PickUpRecord, o.TrackingNumber,o.BOL, o.Reference2, o.ServiceType, o.ServiceZip, o.Zone, o.Weight,o.PublishedCharge, o.IncentiveCredit, o.InsuredCharge, o.BilledCharge,o.DelAreaSurcharge,m.FRRDSSTrackingNbr,m.FRRDSSShipmentNbr, m.FRRDSSDivision,m.FRRDSSDeptNbr, m.FRRDSSVendorNbr, m.FRRDSSChargeBackNbr,m.FRRDSSShipmentCreateDate,m.[UPS Units],m.[UPS % Units to Total]into dbo.tempOutBoundTablefrom upsOutbound o left join msoutboundhistory m on right(o.bol,7) =m.FRRDSSShipmentNbr and o.bol = m.FRRDSSShipmentNbr********How do I select the records using substring(o.bol,4,7) to add to theabove query? How do I inner join the records based on adding thesubstring extracted o.bol?
View 3 Replies View Related#1 This stored procedure can be used to search and replace substring in the char, nchar, varchar and nvarchar columns in all tables in the current database. You should pass the text value to search and the text value to replace. So, to replace all char, nchar, varchar and nvarchar columns which contain the substring 'John' with the substring 'Bill', you can use the following (in comparison with the SetTbColValues stored procedure, this stored procedure replace only substring, not the entire column's value):
EXEC replace_substring @search_value = 'John', @replace_value = 'Bill'
I want to add up the values in a couple of text boxes in another textbox. How do I refer to the textboxes?
fields!textbox1.value doesn't work..what does?
I'm moving some queries out of an Access front end and creating views out ofthem in SQL Server 2005 express. In some of the numeric fields, I use nzquite often, ( i.e. nz([MyField],0)) to return a zero if the field is null.Is there anything equivalent to this in SQL Server? Right now I'm usingCASE WHEN ... but it seems like an awful lot of script to write just toreplace null with a zero.Any help would be greatly appreciated.Thanks!
View 16 Replies View RelatedI have a report parameter textbox in my SSRS report which has the parameter properties as "allow null value" and "allow blank value" checked.
How I can ensure that when the value is entered in textbox, it should accept any character ie. The SQL code I should write so that all the characters inputted via the report parameter are accepted.
Hello,
I want to put a textbox on the report such that the end-user can type in that textbox and then the text entered in the textbox could be captured by the report and could be used for further processing. Any pointers to this??
Thanks,
RS-2005
Greetings -
Am having problems setting a normal SSN xxx-xx-xxx format for a report textbox using the Textbox Properties / Format tab. The data is stored as text, and am using the "Format Code .... " option. When I choose "Custom" option, and attempt any formatting string containing the "-", the SSN is displayed without the "-". Nothing I have tried works.
What is the correct context string for this format?
Tks.
I am working in SSRS 2000, and I have a report using a table. In the footer of the table I want to do a calcuation. I have a textbox in the table called "SumAmtCurrent", which is a sum value for a field in my dataset. I have another field in my dataset, "TotalRevCurrent", and I would like to take this second field, subtract the value in the textbox "SumAmtCurrent", and have the result in the footer of the table. I tried to reference the textbox using ReportItems!SumAmtCurrent.Value - but that gives me the following error
"...The value expression for the textbox €˜textbox7€™ refers to the report item €˜SumAmtCurrent€™. Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope..."
Is there a way I can get this total into my report?
Thanks in advance!
Hi all..
I developed a local report to be viewed using the "Report Viewer" control. The report is attached to an object data source.
All works perfectly, now I want to display a declared value (from the form containing the report viewer) in a textbox. Like:
Dim NofDays as string
Me.ReportViewer1.LocalReport.textbox6.text = NofDays
I ve tried a lot of options like using the report paramaters but I cannot get it to work.
Does aneyone have a clue?
Thankzzzzzz
Juststar
What is the expression for displaying the rowcount from a dataset in a textbox report item?
View 2 Replies View RelatedHi,
1. I have one combobox for supplierID, it displays 1,2,3...
Now i want to display the corresponing SupplierDescription in the textbox placed in the Page Header Section. If it is multiple selection then it has to be seperated by ',' (Comma).
Ex: IF i select 1,2,3 in the combobox then in the TextBox should look like
Suplliers: Ram, Don, Krish
Can you please help me in this
Thanks
Dinesh
I need to add a textbox in the report which would display the total number of rows in the report.I need to do this in reports which have either tabular layout or a matrix layout .
Thanks in advance
I found this thread which allows me to write vertical from the bottom up but I want to flip the text 180 degrees and write it upside down:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=559933&SiteID=1
I tried modifying it and playing around with the TranslateTranform function but I'm really confused on how it works. I can get the first letter in my text to be upside down but the rest is not showing up. It's like it's being cut off or something. Can anyone point me in the right direction?
Thank you in advanced.
We have multiline text box of datatype ntext, and users will use tabs to format the data for better readability.
How can we keep this formatting in SSRS 2000? Right now, it simply goes away and resembles nothing like the application.
Thanks!
Hello all,
I have a report with some groups which can all be expanded/collapsed by clicking on a textbox with an action attached to it.
The example I used can be found here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=600583&SiteId=1
But I want to hide the row containing this textbox (or the textbox itself) on the actual printed report.
Is there any report item that can tell me if the report is in preview phase, or can it be solved in any other way?
Kind regards,
Dirk Holland
Some textbox are great moving, and need to when the box above gets extra data.. but how do a stop one from moving? make it stay right where I put it.
A stays where it is... for some reason. but B doesnt? it moves down according the textboxes to the left (where is says phone) ...
Hi,
I need to add carriage returns into a text box of 3 lines.
The data is pulled from the BD so the "cariage return" symbol need to be in the database field.
I know that some reporting software give the option to add HTML code into textbox but I did'nt find out about ms reporting 2000.
Thanks,
Marco
Hi all. Looking for information on whether or not the control/navigation bar that appears at the top of the report view can be changed. I am specifically looking to remove it and assign its controls to other .net or html controls/objects. For example, the control bar has the arrow for viewing the next page. Instead of that, perhaps I might like to have a hyperlink etc somewhere else on the page that performs the same functionality. I have searched and searched for information on this but haven't been having much luck. It's kind of a difficult thing to search for due to ambiguous key words "control bar" "navigation" etc.
Not looking for specific info as to how to go about doing it, more like: what is possible and where can I go to find the specifics.
Thanks so much in advance,
Jeff
Hi All,
I am working on SQL server 2005 Reports.
I have one report, one dataset is assigned to it, and one table which displays it.
Now I come accros requirement that, the column value in the filter condition for the table is present in one textbox.
I can not use textbox i.e. reportItems in filter condition. Can someone suggest me how to use textbox value in filters?
I want to display parent/child records on report. I am not getting the proper solution.
The data is like this:
Sequence ItemCode IsParent
1 XYZ 0 'do not have child record
2 PQR 1 'have child records with sequence no 3
3 ASD 0
3 AFDGE 0
3 VDC 0
4 ASR 1 'have child records with sequence no 5
5 ASR 0
If IsParent = 1, that record has child records with sequence = parent sequenece + 1
I think u can understand the data I need to bind, and it is like:
XYZ
+ PQR
ASD
AFDGE
VDC
ASR
On + click we can do show/hide of child records.
I m not getting how to achive this in SQL server report. Can u give some hint?
Thanks in advance
Pravin
In a typical Database, there are tables, views, stored Procedures, user Defined Functions.
We could use tables and views in designing the Report Model.
We cannot use Stored Procedures, I tried that.
Please could somebody tell me if we could use User Defined Functions?
What if a view is already using a user defined function, is the function automatically includid in the Model Design?
Thank you,
I was wondering if it was possible to incorporate sql views or functions that filter data on the top bar for users when they run a report.
a response is greatly appreciated! If so, how?
I installed 2K5 developer on my box. I was impressed with the Summary tab report functions and the reports available there. Then I ran the "Reporting services configuration" tool to get RS running, but now several of the summary reports are broken. There are several different error messages given in the summary window, depending on the report selected.
For example, the "server dashboard" now displays
Summary Unavailable
The information needed to display a summary page for the selected object is not available.
Error:
"sql_handle" is not a recognized table hints option. If it is intended as a parameter to a table-valued function, ensure that your database compatibility mode is set to 90.
The next two reports work, but the "Scheduler Health" report displays
Summary Unavailable
The information needed to display a summary page for the selected object is not available.
Error:
Incorrect syntax near '.'.
"Memory Consumption" works GREAT, but "Activity - All blocking transaction" shows:
Summary Unavailable
The information needed to display a summary page for the selected object is not available.
Error:
Incorrect syntax near '.'.
Incorrect syntax near '.'.
Incorrect syntax near the keyword 'as'.
Incorrect syntax near the keyword 'as'.
What could be the cause of such errors? Is there an "easy fix"? I wouldn't know how to "unconfigure" reporting services and have a feeling that wouldn't help anyway...
I was playing around with the new SQL 2005 CLR functionality andremembered this discussion that I had with Erland Sommarskog concerningperformance of scalar UDFs some time ago (See "Calling sp_oa* infunction" in this newsgroup). In that discussion, Erland made thefollowing comment about UDFs in SQL 2005:[color=blue][color=green]>>The good news is that in SQL 2005, Microsoft has addressed several of[/color][/color]these issues, and the cost of a UDF is not as severe there. In fact fora complex expression, a UDF in written a CLR language may be fasterthanthe corresponding expression using built-in T-SQL functions.<<I thought the I would put this to the test using some of the same SQLas before, but adding a simple scalar CLR UDF into the mix. The testinvolved querying a simple table with about 300,000 rows. Thescenarios are as follows:(A) Use a simple CASE function to calculate a column(B) Use a simple CASE function to calculate a column and as a criterionin the WHERE clause(C) Use a scalar UDF to calculate a column(D) Use a scalar UDF to calculate a column and as a criterion in theWHERE clause(E) Use a scalar CLR UDF to calculate a column(F) Use a scalar CLR UDF to calculate a column and as a criterion inthe WHERE clauseA sample of the results is as follows (time in milliseconds):(295310 row(s) affected)A: 1563(150003 row(s) affected)B: 906(295310 row(s) affected)C: 2703(150003 row(s) affected)D: 2533(295310 row(s) affected)E: 2060(150003 row(s) affected)F: 2190The scalar CLR UDF function was significantly faster than the classicscalar UDF, even for this very simple function. Perhaps a more complexfunction would have shown even a greater difference. Based on this, Imust conclude that Erland was right. Of course, it's still faster tostick with basic built-in functions like CASE.In another test, I decided to run some queries to compare built-inaggregates vs. a couple of simple CLR aggregates as follows:(G) Calculate averages by group using the built-in AVG aggregate(H) Calculate averages by group using a CLR aggregate that similatesthe built-in AVG aggregate(I) Calculate a "trimmed" average by group (average excluding highestand lowest values) using built-in aggregates(J) Calculate a "trimmed" average by group using a CLR aggregatespecially designed for this purposeA sample of the results is as follows (time in milliseconds):(59 row(s) affected)G: 313(59 row(s) affected)H: 890(59 row(s) affected)I: 216(59 row(s) affected)J: 846It seems that the CLR aggregates came with a significant performancepenalty over the built-in aggregates. Perhaps they would pay off if Iwere attempting a very complex type of aggregation. However, at thispoint I'm going to shy away from using these unless I can't find a wayto do the calculation with standard SQL.In a way, I'm happy that basic SQL still seems to be the fastest way toget things done. With the addition of the new CLR functionality, Isuspect that MS may be giving us developers enough rope to comfortablyhang ourselves if we're not careful.Bill E.Hollywood, FL------------------------------------------------------------------------- table TestAssignment, about 300,000 rowsCREATE TABLE [dbo].[TestAssignment]([TestAssignmentID] [int] NOT NULL,[ProductID] [int] NULL,[PercentPassed] [int] NULL,CONSTRAINT [PK_TestAssignment] PRIMARY KEY CLUSTERED([TestAssignmentID] ASC)--Scalar UDF in SQLCREATE FUNCTION [dbo].[fnIsEven](@intValue int)RETURNS bitASBEGINDeclare @bitReturnValue bitIf @intValue % 2 = 0Set @bitReturnValue=1ElseSet @bitReturnValue=0RETURN @bitReturnValueEND--Scalar CLR UDF/*using System;using System.Data;using System.Data.SqlClient;using System.Data.SqlTypes;using Microsoft.SqlServer.Server;public partial class UserDefinedFunctions{[Microsoft.SqlServer.Server.SqlFunction(IsDetermini stic=true,IsPrecise=true)]public static SqlBoolean IsEven(SqlInt32 value){if(value % 2 == 0){return true;}else{return false;}}};*/--Test #1--Scenario A - Query with calculated column--SELECT TestAssignmentID,CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END ASCalcColumnFROM TestAssignment--Scenario B - Query with calculated column as criterion--SELECT TestAssignmentID,CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END ASCalcColumnFROM TestAssignmentWHERE CASE WHEN TestAssignmentID % 2=0 THEN 1 ELSE 0 END=1--Scenario C - Query using scalar UDF--SELECT TestAssignmentID,dbo.fnIsEven(TestAssignmentID) AS CalcColumnFROM TestAssignment--Scenario D - Query using scalar UDF as crierion--SELECT TestAssignmentID,dbo.fnIsEven(TestAssignmentID) AS CalcColumnFROM TestAssignmentWHERE dbo.fnIsEven(TestAssignmentID)=1--Scenario E - Query using CLR scalar UDF--SELECT TestAssignmentID,dbo.fnIsEven_CLR(TestAssignmentID) AS CalcColumnFROM TestAssignment--Scenario F - Query using CLR scalar UDF as crierion--SELECT TestAssignmentID,dbo.fnIsEven_CLR(TestAssignmentID) AS CalcColumnFROM TestAssignmentWHERE dbo.fnIsEven(TestAssignmentID)=1--CLR Aggregate functions/*using System;using System.Data;using System.Data.SqlClient;using System.Data.SqlTypes;using Microsoft.SqlServer.Server;[Serializable][Microsoft.SqlServer.Server.SqlUserDefinedAggregate (Format.Native)]public struct Avg{public void Init(){this.numValues = 0;this.totalValue = 0;}public void Accumulate(SqlDouble Value){if (!Value.IsNull){this.numValues++;this.totalValue += Value;}}public void Merge(Avg Group){if (Group.numValues > 0){this.numValues += Group.numValues;this.totalValue += Group.totalValue;}}public SqlDouble Terminate(){if (numValues == 0){return SqlDouble.Null;}else{return (this.totalValue / this.numValues);}}// private accumulatorsprivate int numValues;private SqlDouble totalValue;}[Serializable][Microsoft.SqlServer.Server.SqlUserDefinedAggregate (Format.Native)]public struct TrimmedAvg{public void Init(){this.numValues = 0;this.totalValue = 0;this.minValue = SqlDouble.MaxValue;this.maxValue = SqlDouble.MinValue;}public void Accumulate(SqlDouble Value){if (!Value.IsNull){this.numValues++;this.totalValue += Value;if (Value < this.minValue)this.minValue = Value;if (Value > this.maxValue)this.maxValue = Value;}}public void Merge(TrimmedAvg Group){if (Group.numValues > 0){this.numValues += Group.numValues;this.totalValue += Group.totalValue;if (Group.minValue < this.minValue)this.minValue = Group.minValue;if (Group.maxValue > this.maxValue)this.maxValue = Group.maxValue;}}public SqlDouble Terminate(){if (this.numValues < 3)return SqlDouble.Null;else{this.numValues -= 2;this.totalValue -= this.minValue;this.totalValue -= this.maxValue;return (this.totalValue / this.numValues);}}// private accumulatorsprivate int numValues;private SqlDouble totalValue;private SqlDouble minValue;private SqlDouble maxValue;}*/--Test #2--Scenario G - Average Query using built-in aggregate--SELECT ProductID, Avg(Cast(PercentPassed AS float))FROM TestAssignmentGROUP BY ProductIDORDER BY ProductID--Scenario H - Average Query using CLR aggregate--SELECT ProductID, dbo.Avg_CLR(Cast(PercentPassed AS float)) AS AverageFROM TestAssignmentGROUP BY ProductIDORDER BY ProductID--Scenario I - Trimmed Average Query using built in aggregates/setoperations--SELECT A.ProductID,CaseWhen B.CountValues<3 Then NullElse Cast(A.Total-B.MaxValue-B.MinValue ASfloat)/Cast(B.CountValues-2 As float)End AS AverageFROM(SELECT ProductID, Sum(PercentPassed) AS TotalFROM TestAssignmentGROUP BY ProductID) ALEFT JOIN(SELECT ProductID,Max(PercentPassed) AS MaxValue,Min(PercentPassed) AS MinValue,Count(*) AS CountValuesFROM TestAssignmentWHERE PercentPassed Is Not NullGROUP BY ProductID) BON A.ProductID=B.ProductIDORDER BY A.ProductID--Scenario J - Trimmed Average Query using CLR aggregate--SELECT ProductID, dbo.TrimmedAvg_CLR(Cast(PercentPassed AS real)) ASAverageFROM TestAssignmentGROUP BY ProductIDORDER BY ProductID
View 9 Replies View RelatedHi!
I dont know if i will explain this correctly, but my problem is with reporting service.
I'm supposed to Sum value in one textbox and than that sum use it in sum in other textbox.
Something like this:
Sum(Fields!Abc.Value/(Fields!dfg.Value+Sum(Fields!abc.Value)),"matrix1_RowGroup1")*100
I get error msg 'The Value expression for the textbox 'textbox49' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.'
Something like this wont work either Sum(Fields!abc.Value/ReportItems("textbox56").Value)*100
Error The Value expression for the textbox 'textbox55' uses an aggregate function on a report item. Aggregate functions can be used only on report items contained in page headers and footers.
So, pls help if you know how to reference textbox in other in body of report.
Thx.
Hi all,
I have just started using SQL7 and quite dumb at it.
Here is my problem
i have tables ip_address and ip_subnets. both contains more than 20,000 records. Though ideally each subnet should correspond to only one ip address it is not so due to SMS inventory and remote clients configurations etc.
As an example If my ip address is 141.151.128.78 I need to select only 141.151.128.64 ( or atleast 141.151.128.*)as the valid subnet. In other words I need to compare upto 3rd octet and only if it matches with ip address then declare that as the valid subnet.
Pls note that ip addresses vary for each machine though there will 4 octets, I can't use character positions as the nos in each octet might vary from 1-255.
Any help would be greatly appreciated
Pasted here under is the query script I am playing around with charcter poistions which are not working in my favor. Just added to explain my problems in more clearer way
select distinct system_data.name0, System_IP_Address_ARR.ip_addresses0, System_IP_subnets_Arr.ip_subnets0, system_disc.client0 from system_Data, System_IP_Address_ARR, system_ip_subnets_arr, system_disc where system_data.machineid = System_IP_Address_ARR.itemkey and system_data.machineid = system_ip_subnets_arr.itemkey and system_data.machineid = system_disc.itemkey and system_disc.client0 = 1 and substring(System_IP_Address_ARR.ip_addresses0,1,10 ) = substring(System_IP_subnets_ARR.ip_subnets0,1,10) and substring(System_IP_Address_ARR.ip_addresses0,10,1 ) = '.' and System_IP_subnets_ARR.ip_subnets0 not in ('11%.%.%.%','12%.%.%.%', '10%.%.%.%' , '10.%.%.%' , '1.%.%.%') order by System_DATA.name0
Arun
Hey you sql programming guru's
I need help seperating a name from first name and last name
The field is like this,
last name, first name
example Doe, John
I need to seperate the last name from the , to the first character
and the last name from the , to the last character.
I think I have to use a substring but not sure how tell it to stop and
start when it gets to the comma.
Can someone please help me.
Thanks,
Dianne
Need to do something like SUBSSTRING in Access, any ideas?
View 1 Replies View RelatedHi
Can anyone show me how to do the following:
I have this snippet of data
ids
-----------------------------------
1582270|1582277
1582270|1582277|1582286
1582270
I want to return the id (the id may not always have the same number of numbers) after the last pipe (|) delimter.
So i want a rs like this :
ids
-----------------------------------
1582277
1582286
1582270
Thanks in advance
Hi,
please help me in developing query to satisfy this...
i have table called test and the table data looks like this.
col1
123.abc
1.ab
12.cba
the query needs to return all rows data after . the result set should return this
abc
ab
cba
appreciate your help..
thanks
sskris
I have a field that contaings 15 characters. I want to just pull the first 6. So anything that matches these 6 will be returned.
View 10 Replies View RelatedWe have entries like below in a table. I need a query by which I can get the CustomerName from the below entries.
ACustomerName
ACustomerNameCredit
ACustomerNameDebit
Thanks!