I have developed an application in SSIS which has 4 packages and another "Run All" package to run all these.
I want to declare a variable which I cna call in all the 4 pacages. It has to be initiated in "Run All".
Please help asap
how to get multiple column value to variable in PDW/DSQL?such as below
declare @a table(col1 int, col2 int)
insert into @a values (1,2)
declare @c int, @d int
select @c = col1, @d = col2
from @a
select @c, @d
I am not sure how to do this. I need to run 3 sql statements against a table with a variable created in one of them.
Here is the first statement
Select ID from table1 where value = 1
Need to store that value in a variable
Update table1
Set value = 0
Where ID = variable
Update table1
Set value = 1
Where ID = variable + 1
ID is a incremental identity field, so it is numeric. Basically I need to change the value of one record to 0, and make the next records value = one.
Any help is appreciated.
I need to create a SQL Server Stored Proc that will handle a variable number of Or conditions. This is currently being done with a MS Access Query as follows
Do Until rst.EOF
myw = myw = "(rst!Field1 <> 0) OR (rst!Field1 <> 1) "
Loop
mysql = "UPDATE Table SET Field2 = 1 WHERE " & myw
The above code is very simplified.
I Want to create a stored proc to do this but I cannot send it the SQL to the Stored Proc (or can I) so I need to use parameters instead. I want to do something like
Do until rst.EOF
Set cmd = MakeStoredProc("sp_Table_UpdateField2_ForField1")
Set prmField1 = cmd.CreateParameter("Field1", adInteger, adParamInput, , rst!Field2)
cmd.Parameters.Append Field1
cmd.Execute
Loop
Again the above is very simplified. So how can you get the the SQL for the Stored Proc for something like the following from a loop
WHERE = (Field1 <> 0) OR (Field1 <> 1) OR (Field1 <> 2) ...
Thanks in advance for your help
Hi all;
How do I enclose multiple filters in a variable, for instance how would I put the following filter into a variable and also is it actually possible or do I have to do something else before performing this type of operation:
tel1 like '072%' or tel1 like '+27 72%' or tel1 like '072-%'
or tel1 like '+2772%' or tel1 like '72%'
and len(tel1) > 7
or tel2 like '072%' or tel2 like '+27 72%' or tel2 like '072-%'
or tel2 like '+2772%' or tel2 like '72%'
and len(tel2) > 7
or tel3 like '072%' or tel3 like '+27 72%' or tel3 like '072-%'
or tel3 like '+2772%' or tel3 like '72%'
and len(tel3) > 7
or tel4 like '072%' or tel4 like '+27 72%' or tel4 like '072-%'
or tel4 like '+2772%' or tel4 like '72%'
and len(tel4) > 7
or tel5 like '072%' or tel5 like '+27 72%' or tel5 like '072-%'
or tel5 like '+2772%' or tel5 like '72%'
and len(tel5) > 7
or tel_other like '072%' or tel_other like '+27 72%' or tel_other like '072-%'
or tel_other like '+2772%' or tel_other like '72%'
and len(tel_other) > 7
the problem is that it's got a couple of apostrophes which when declaring variables pulls it out of that mode, I have looked on the internet but can't seem to find anything
I am using xml schema that is like this:
<DetailRows>
<DetailRow>
<MonthNumber></MonthNumber>
<Amount></Amount>
</DetailRow>
</DetailRows>If my variable contains following xml document as un-typed xml
[Code] ....
However, if I use a typed xml variable that is based on above schema, I cannot use OPENXML. What is the correct way of achieving same result with a typed xml doc? I am using SS2K5.
I have two tables. Table 1 has column "job", table 2 has column "job" and column "item". In table table 2 there are multiple "items" for each "job"
I would like to insert all of the "items" into table 1, based on a join table1.job = table2.job
In a t-sql 2012, I want to declare variables with multiple values and I am having problems since sql server thinks I am working with numbers when I am really working with character and bit values. Here is a copy of the sql that I am trying to use:
DECLARE @Account varchar(100)
DECLARE @Processed bit
set @Account = '58100,98326,09897'
set @Processed ='0,1'
Thus would you show me what I can do so that the sql server knows that I want the values in the set states above to be varchar or character value for @Account and bit value for @Processed?
name age weightaaa 23 50bbb 23 60ccc 22 70ddd 24 20 eee 22 30i need the output that calculate the sum of weight group by name input : age limit ex: 22 - 23 output : age total weight 23 11022 100 this output must stored in a sql declared variable for some other further process .
View 7 Replies View RelatedI need to do something like this in SSIS:From one SQL table I need to get some id values, I am using a simple sql query:Select ID from Identifier where value is not null.I've got this result:As a final result I need to generate and set a variable in SSIS with the final value:
@var
= '198','120','ACP','120','PQU'
Which I need to use later in a odbc expression.How can I do this in SSIS?
I hope this is a simple question. I have a package-scope user variable which is populated using a Recordset Destination in a Data Flow task. I am attempting to read the variable multiple times from different Script Tasks. The first read works fine, however the second read, in the second Script Task, says that there are no rows.
Has anyone run across this before? Any thoughts would be appreciated.
Thanks
Is it possible to assign multiple columns from a SQL query to one variable. In the below query I have different variable (email, fname, month_last_taken) from same query being assigned to different columns, can i pass all columns to one variable only and then extract that column out of that variable later? This way I just need to write the query once in the complete block.
DECLARE @email varchar(500)
,@intFlag INT
,@INTFLAGMAX int
,@TABLE_NAME VARCHAR(100)
[code].....
The following works in query if I specify one student (PlanDetailUID) when running query. If I try to specify multiple students (PlanDetailUID) when running query, I get variable cannot take multiple entries. I assume I would need to replace (variables) in PART 2 with (case statements / using select everywhere) to get around the issue or is there a better way ?
CREATE TABLE #AWP (
[TransDate] [datetime] NULL,
[Description] [varchar](1000) NULL,
[Amount] [float] NULL,
[TotalDueNow] [float] NULL,
[code]....
declare @var varchar(8000)
set @var='Name1~50~20~50@Name2~25.5~50~63@Name3~30~80~43@Name4~60~80~23'
---------------------
Create table #tmp(id int identity(1,1),Name varchar(20),Value1 float,Value2 float,Value3 float)
Insert into #tmp (Name,Value1,Value2,Value3)
Values ('Name1',50,20,50 ), ('Name2',25.5,50,63 ), ('Name3',30,80,43 ), ('Name4',60,80,23)
select * from #tmp
I want to convert to @var to same like #tmp table ..
"@" - delimiter goes to rows
"~" - delimiter goes to columns
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
I am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
Hi
View 7 Replies View RelatedI keep getting this debug error, see my code below, I have gone thru it time and time agian and do not see where the problem is. I have checked and have no NULL values that I'm trying to write back.
~~~~~~~~~~~
Error:
System.NullReferenceException was unhandled by user code Message="Object variable or With block variable not set." Source="Microsoft.VisualBasic"
~~~~~~~~~~~~
My Code
Dim DBConn As SqlConnection
Dim DBAdd As New SqlCommand
Dim strConnect As String = ConfigurationManager.ConnectionStrings("ProtoCostConnectionString").ConnectionString
DBConn = New SqlConnection(strConnect)
DBAdd.CommandText = "INSERT INTO D12_MIS (" _
& "CSJ, EST_DATE, RECORD_LOCK_FLAG, EST_CREATE_BY_NAME, EST_REVIEW_BY_NAME, m2_1, m2_2_date, m2_3_date, m2_4_date, m2_5, m3_1a, m3_1b, m3_2a, m3_2b, m3_3a, m3_3b" _
& ") values (" _
& "'" & Replace(vbCSJ.Text, "'", "''") _
& "', " _
& "'" & Replace(tmp1Date, "'", "''") _
& "', " _
& "'" & Replace(tmpRecordLock, "'", "''") _
& "', " _
& "'" & Replace(CheckedCreator, "'", "''") _
& "', " _
& "'" & Replace(CheckedReviewer, "'", "''") _
& "', " _
& "'" & Replace(vb2_1, "'", "''") _
& "', " _
& "'" & Replace(tmp2Date, "'", "''") _
& "', " _
& "'" & Replace(tmp3Date, "'", "''") _
& "', " _
& "'" & Replace(tmp4Date, "'", "''") _
& "', " _
& "'" & Replace(vb2_5, "'", "''") _
& "', " _
& "'" & Replace(vb3_1a, "'", "''") _
& "', " _
& "'" & Replace(vb3_1b, "'", "''") _
& "', " _
& "'" & Replace(vb3_2a, "'", "''") _
& "', " _
& "'" & Replace(vb3_2b, "'", "''") _
& "', " _
& "'" & Replace(vb3_3a, "'", "''") _
& "', " _
& "'" & Replace(vb3_3b, "'", "''") _
& "')"
DBAdd.Connection = DBConn
DBAdd.Connection.Open()
DBAdd.ExecuteNonQuery()
DBAdd.Connection.Close()
CREATE TABLE #T(branchnumber VARCHAR(4000))
insert into #t(branchnumber) values (005)
insert into #t(branchnumber) values (090)
insert into #t(branchnumber) values (115)
insert into #t(branchnumber) values (210)
insert into #t(branchnumber) values (216)
[code]....
I have a parameter which should take multiple values into it and pass that to the code that i use. For, this i created a parameter and temporarily for testing i am passing some values into it.Using a dynamic SQL i am converting multiple values into multiple records as rows into another variable (called @QUERY). My question is, how to insert the values from variable into a table (table variable or temp table or CTE).OR Is there any way to parse the multiple values into a table. like if we pass multiple values into a parameter. those should go into a table as rows.
Hello,
I run the DTS to copy data from Progress to SQL Server. How can match/convert the date variables to check.
The field p-date as format 'mm-dd-year' . It has the value of 10/09/2001.
The field s-date as varchar format. It has the value 2001-10-09.
How can use the where condition ( Select ...... WHERE p-date = s-date.)
Thanks
When trying to upsize an access database to sql server using the upsize wizard, I get the following error:
"Object variable or With block variable not set."
Any assistance is greatly appreciated.
Hello!
I'm using SQL Server 2000.
I have a variable which contains the name of another variable scoped in my stored procedure. I need to get the value of that other variable, namely:
DECLARE @operation VARCHAR(3)
DECLARE @parameterValue VARCHAR(50)
SELECT @operation='DIS'
CREATE table #myTable(value VARCHAR(20))
INSERT into #myTable values('@operation')
SELECT top 1 @parameterValue = value from #myTable
-- Now @parameterValue is assigned the string '@operation'
-- Here I need some way to retrieve the value of the @operation variable I declared before (in fact
-- another process writes into the table I retrieved the value from), in this case 'DIS'
DROP TABLE #myTable
I've tried several ways, but didn't succeed yet!
Please tell me there's a way to solve my problem!!!
Thank you very much in advance!
I have an SSIS package that creates a csv file based on a execute sql task.
The sql is incredibly simple select singlecolumn from table.
In the properties of the execute sql task I specify the result set as "full result set" when I run it I get the error that: Error:
The type of the value being assigned to variable "User::CSVoutput" differs from the current variable type.
Variables may not change type during execution. Variable types are strict, except for variables of type Object.
If I change the resultset to single row then I only get the first row from the DB (same if I choose none), If I choose XML then I get the error that the result is not xml. What resultset type do I need to choose in order to get all the rows into the CSV? The variable I am populating is of type string and is User::CSVoutput
While I was processing the cubes, error "Object Variable Or With Block Variable Not Set" prompt out,
what does it mean ?
Please help !!!
Is there any way to use a 2 dimensional array of strings as the Variable Enumerator for the "Foreach From Variable Enumerator". I am trying to copy a collection of files from folder A to folder B. In a script, I would populate, let us say, an array of (2,10), for 10 files, with one column representing the source file and other column representing the target column task. Then I would like to set this string array variable as the "Variable Enumerator" for the "Foreach From Variable Enumerator" and use file system tasks in the foreach loop to perform the tasks. The problem is that the "Foreach From Variable Enumerator" does not let me choose an index, but passes only one index 0, so, I will only be able to pass just one column. How do I let the foreach enumerator let me choose an index. The other foreach enumerators, foreach item and ADO give me the option to select index. I would like the same functionality in the foreach variable.
Note: I cannot use the "For Each File" enumerator, since the files are to be selected by a script only.
Thanks for the help.
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
I've got two Sql Tasks on my dtsx. The first one loads a value into "Proyecto" user variable and the second one executes a variable named "SegundoProceso" which contains from the beginning:
"select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""
As SqlSourceType propety I have "Variable" and inside ResultSet or Parameter Mapping nodes there is nothing.
[Execute SQL Task] Error: Executing the query ""select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""" failed with the following error: "Cannot use empty object or column names. Use a single space if necessary.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Where am I wrong?
TIA
Hi,
I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example:
DECLARE @my_variable int
, <several_others>
SET @my_variable = ?
<do_some_stuff>
Of course, I also set up the parameter mapping.
However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements.
I have several reasons for wanting to do this:
- the script uses several variables, several times. Not all SQL variables are assigned via IS variables.
- For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order.
- Passing the variable once also makes it easier to design the script outside IS using Management Studio.
- This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks.
- I prefer to use the OLE DB connection manager because it's a de facto standard here.
Could anyone help me out with the following questions:
- Is the above possible?
- If so, how?
- If not, why not?
- If not, what would be the best way around this problem?
Thanx in advance,
Pipo
How can I inside a DFT set a System variable, for example "TaskName" to an own created User Variable?
The reason is that I need to use this variable later in the Control Flow.
Regards
Riccardo
Hi All!
I have a parent package that contains two children... The second child depends on the succes of the first child.
THe first child generates a variable value and stores it in an Environment variable ( Visibility - All ) ...After the first succeeds, the second will start executing and will pick up the variable value from environment variable( through package configuration setting )...
Unfortunately, this doesn't work...As the second child picks the stale value of the environment variables...Essentially it assigns variable value not after the first child is finished, but right at the beginning of parent execution...
I tried to execute coth children as Out Of Proc as well as In Proc...The same
Would anybody have an idea how to resolve this problem?
Thanks in advance for any help!
Vladimir
ok, I am on Day 2 of being brain dead.I have a database with a table with 2 varchar(25) columns I have a btton click event that gets the value of the userName, and a text box.I NEED to insert a new row in a sql database, with the 2 variables.Ive used a sqldatasource object, and tried to midify the insert parameters, tried to set it at the button click event, and NOTHING is working. Anyone have a good source for sql 101/ASP.Net/Braindead where I can find this out, or better yet, give me an example. this is what I got <%@ Page Language="C#" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><script runat="server"> protected void runit_Click(object sender, EventArgs e) { //SqlDataSource ID = "InsertExtraInfo".Insert(); //SqlDataSource1.Insert(); } protected void Button1_Click1(object sender, EventArgs e) { SqlDataSource newsql; newsql.InsertParameters.Add("@name", "Dan"); newsql.InsertParameters.Add("@color", "rose"); String t_c = "purple"; string tempname = Page.User.Identity.Name; Label1.Text = tempname; Label2.Text = t_c; newsql.Insert(); }</script><html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server"> <title>mini update</title></head><body> <form id="form1" runat="server"> name<asp:TextBox ID="name" runat="server" OnTextChanged="TextBox2_TextChanged"></asp:TextBox><br /> color <asp:TextBox ID="color" runat="server"></asp:TextBox><br /> <br /> <asp:Button ID="Button1" runat="server" OnClick="Button1_Click1" Text="Button" /> <br /> set lable =><asp:Label ID="Label1" runat="server" Text="Label" Width="135px" Visible="False"></asp:Label><br /> Lable 2 => <asp:Label ID="Label2" runat="server" Text="Label"></asp:Label><br /> Usernmae=><asp:LoginName ID="LoginName1" runat="server" /> <br /> <br /> <br /> <br /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues" ConnectionString="<%$ ConnectionStrings:newstring %>" DeleteCommand="DELETE FROM [favcolor] WHERE [name] = @original_name AND [color] = @original_color" InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, @color)" OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT [name], [color] FROM [favcolor]" UpdateCommand="UPDATE [favcolor] SET [color] = @color WHERE [name] = @original_name AND [color] = @original_color"> <DeleteParameters> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="color" Type="String" /> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </UpdateParameters> <InsertParameters> <asp:InsertParameter("@name", "Dan", Type="String" /> <asp:InsertParameter("@color", "rose") Type="String"/> </InsertParameters> </asp:SqlDataSource> <asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="name" DataSourceID="SqlDataSource1"> <Columns> <asp:CommandField ShowDeleteButton="True" ShowEditButton="True" ShowSelectButton="True" /> <asp:BoundField DataField="color" HeaderText="color" SortExpression="color" /> <asp:BoundField DataField="name" HeaderText="name" ReadOnly="True" SortExpression="name" /> </Columns> </asp:GridView> </form></body></html>
View 1 Replies View Related