I have a form where a user can select multiple items from a listbox control.How can I pass each item selected to a sproc? Do i need to created a paramter for each item in my listbox in my sproc?Has anyone done this, I dont want to create dynamic sql to handle this and i dont really want to create 100 parameters to handle my listbox items.thanks
View 1 RepliesHi, i have a listbox with multiple selection enabled, the end user uses this listbox to select what data they want to view eg. they select "green" to view all the green cars, "red" to select all the red cars etc. i have the listbox as the control that is connected to the datasource (the sql used for it is select * from cars_table where color =@colorthis works fine when one item in the listbox is selected, but when multiples are selected it does not work what format does the =@color have to be when multiples are selected? i've tried "green, red" "green + red" etc. but cannot seem to get it workingdoes anybody have any working examples that i can take a look at? it seems to be a common action, yet i cannot seem to find any documentation on how to get it to workthanks in advance!
View 1 Replies View RelatedHi, im a newbie. using VB.net / visual studio 2005 and SQL express
I have pasted my page code below
Basically i have a lisbox which is bound to an sqldatasource. It allows the user to select multiple names. I then have another datasource which when the page is submitted it posts various values from different fields into my db. The insert works fine.My problem is that the multiple selection wont allow me to insert into my db, it just captures the first value.I used this sub below to prove that when i click a button on my page it takes all my selected choices and puts them inside a text box, this works i can see them all. I then bound the textbox text value to the one im inserting into the db, however once again its only inserting the first value from the text box, how is this possible, the text box shows all the values and its set to string, it should insert everything in the text box Protected Sub selectedContact_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim alternatives As ListBox = CType(UploadPictureUI.FindControl("alternatives"), ListBox)
Dim TextBox1 As TextBox = CType(UploadPictureUI.FindControl("TextBox1"), TextBox)
For intLoopIndex As Integer = 0 To alternatives.Items.Count - 1
If alternatives.Items(intLoopIndex).Selected Then
TextBox1.Text &= alternatives.Items(intLoopIndex).Text & _
ControlChars.CrLf
End If
Next
End Sub
Here is my full page code
1 <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Create Profile" Debug="true" %>
2 <script runat="server">
3 Protected Sub UploadPictureUI_ItemInserting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewInsertEventArgs) Handles UploadPictureUI.ItemInserting
4 'Reference the FileUpload control
5 Dim UploadedFile As FileUpload = CType(UploadPictureUI.FindControl("UploadedFile"), FileUpload)
6
7 'Make sure a file has been successfully uploaded
8 If UploadedFile.PostedFile Is Nothing OrElse String.IsNullOrEmpty(UploadedFile.PostedFile.FileName) OrElse UploadedFile.PostedFile.InputStream Is Nothing Then
9 ShowErrorMessage("No file was uploaded. Please make sure that you've selected a file to upload.")
10 e.Cancel = True
11 Exit Sub
12 End If
13
14 'Make sure we are dealing with a JPG or GIF file
15 Dim extension As String = Path.GetExtension(UploadedFile.PostedFile.FileName).ToLower()
16 Dim MIMEType As String = Nothing
17
18 Select Case extension
19 Case ".gif"
20 MIMEType = "image/gif"
21 Case ".jpg", ".jpeg", ".jpe"
22 MIMEType = "image/jpeg"
23 Case ".png"
24 MIMEType = "image/png"
25
26 Case Else
27 'Invalid file type uploaded
28 ShowErrorMessage("Only GIF, JPG, and PNG files can be uploaded.")
29 e.Cancel = True
30 Exit Sub
31 End Select
32
33 'Specify the values for the MIMEType and ImageData parameters
34 e.Values("MIMEType") = MIMEType
35
36 'Load FileUpload's InputStream into Byte array
37 Dim imageBytes(UploadedFile.PostedFile.InputStream.Length) As Byte
38 UploadedFile.PostedFile.InputStream.Read(imageBytes, 0, imageBytes.Length)
39 e.Values("imageData") = imageBytes
40 End Sub
41
42 Private Sub ShowErrorMessage(ByVal msg As String)
43 ErrorMessage.Text = msg
44 ErrorMessage.Visible = True
45 End Sub
46
47 Protected Sub UploadPictureUI_ItemInserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.DetailsViewInsertedEventArgs) Handles UploadPictureUI.ItemInserted
48 'If item successfully inserted, send user back to default
49 If e.Exception Is Nothing Then
50 Response.Redirect("~/confirmation.aspx")
51 End If
52 End Sub
53
54 Protected Sub selectedContact_Click(ByVal sender As Object, ByVal e As System.EventArgs)
55 Dim alternatives As ListBox = CType(UploadPictureUI.FindControl("alternatives"), ListBox)
56 Dim TextBox1 As TextBox = CType(UploadPictureUI.FindControl("TextBox1"), TextBox)
57 For intLoopIndex As Integer = 0 To alternatives.Items.Count - 1
58 If alternatives.Items(intLoopIndex).Selected Then
59 TextBox1.Text &= alternatives.Items(intLoopIndex).Text & _
60 ControlChars.CrLf
61 End If
62 Next
63 End Sub
64
65
66 </script>
67 <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
68 <table border="0" cellpadding="0" cellspacing="0" style="vertical-align: middle;
69 width: 795px; text-align: center">
70 <tr>
71 <td align="center" style="height: 650px" valign="middle">
72 <asp:DetailsView ID="UploadPictureUI" runat="server" AutoGenerateRows="False" CssClass="createProfile"
73 DataKeyNames="id" DataSourceID="accessProfiles" GridLines="None" DefaultMode="Insert">
74 <Fields>
75 <asp:TemplateField HeaderText="Create Profile">
76 <InsertItemTemplate>
77 <table style="width: 350px">
78 <tr>
79 <td align="center" style="width: 150px; height: 30px">
80 Name:</td>
81 <td align="center" style="width: 200px; height: 30px">
82 <asp:TextBox ID="Nametxtbx" runat="server" CssClass="textboxstyle" Text='<%# Bind("Name") %>' MaxLength="20"></asp:TextBox>
83 <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="Nametxtbx"
84 CssClass="errorMessage" ErrorMessage="First Name is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
85 </tr>
86 <tr>
87 <td align="center" style="width: 150px; height: 30px">
88 Email:</td>
89 <td align="center" style="width: 200px; height: 30px">
90 <asp:TextBox ID="emailtxtbx" runat="server" CssClass="textboxstyle" Text='<%# Bind("email") %>'></asp:TextBox>
91 <asp:RequiredFieldValidator ID="RequiredFieldValidator3" runat="server" ControlToValidate="emailtxtbx"
92 CssClass="errorMessage" ErrorMessage="Email Address is Required" ForeColor="">*</asp:RequiredFieldValidator>
93 <asp:RegularExpressionValidator ID="RegularExpressionValidator1" runat="server" ControlToValidate="emailtxtbx"
94 ErrorMessage="RegularExpressionValidator" ForeColor="" ValidationExpression="w+([-+.']w+)*@w+([-.]w+)*.w+([-.]w+)*">*</asp:RegularExpressionValidator></td>
95 </tr>
96 <tr>
97 <td align="center" style="width: 150px; height: 30px">
98 Mobile:</td>
99 <td align="center" style="width: 200px; height: 30px">
100 <asp:TextBox ID="mobiletxtbx" runat="server" CssClass="textboxstyle" Text='<%# Bind("mobile") %>' MaxLength="11"></asp:TextBox>
101 <asp:RequiredFieldValidator ID="RequiredFieldValidator4" runat="server" ControlToValidate="mobiletxtbx"
102 CssClass="errorMessage" ErrorMessage="Mobile Number is Required" ForeColor="">*</asp:RequiredFieldValidator>
103 </td>
104 </tr>
105 <tr>
106 <td align="center" style="width: 150px; height: 30px">
107 Extension:</td>
108 <td align="center" style="width: 200px; height: 30px">
109 <asp:TextBox ID="extensiontxtbox" runat="server" CssClass="textboxstyle" Text='<%# Bind("extension") %>' MaxLength="11"></asp:TextBox>
110 <asp:RequiredFieldValidator ID="RequiredFieldValidator5" runat="server" ControlToValidate="extensiontxtbox"
111 CssClass="errorMessage" ErrorMessage="Phone Extension is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
112 </tr>
113 <tr>
114 <td align="center" style="width: 150px; height: 30px">
115 Alternative Contact:</td>
116 <td align="center" style="width: 200px; height: 30px">
117 <asp:ListBox ID="alternatives" runat="server" CssClass="listboxstyle"
118 DataSourceID="getAlternatives" DataTextField="Name" DataValueField="Name" SelectedValue='<%# Bind("alternativeContact") %>'
119 SelectionMode="Multiple"></asp:ListBox>
120 <asp:RequiredFieldValidator ID="RequiredFieldValidator6" runat="server" ControlToValidate="alternatives"
121 CssClass="errorMessage" ErrorMessage="Alternative Contact is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
122 </tr>
123 <tr>
124 <td align="center" style="width: 150px; height: 30px">
125 Job Role:</td>
126 <td align="center" style="width: 200px; height: 30px">
127 <asp:DropDownList ID="DropDownList2" runat="server" CssClass="dropdownliststyle" DataSourceID="accessrole"
128 DataTextField="role" DataValueField="roleID" AppendDataBoundItems="True" SelectedValue='<%# Bind("roleID") %>'>
129 <asp:ListItem Value="" Selected="False">- Please Select -</asp:ListItem>
130 </asp:DropDownList>
131 <asp:RequiredFieldValidator ID="RequiredFieldValidator7" runat="server" ControlToValidate="DropDownList1"
132 CssClass="errorMessage" ErrorMessage="Job Role is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
133 </tr>
134 <tr>
135 <td align="center" style="width: 150px; height: 30px">
136 Responsibilities:</td>
137 <td align="center" style="width: 200px; height: 30px">
138 <asp:TextBox ID="resposibilities" runat="server" CssClass="textareastyle" Text='<%# Bind("responsibilities") %>'
139 TextMode="MultiLine" MaxLength="200"></asp:TextBox>
140 <asp:RequiredFieldValidator ID="RequiredFieldValidator8" runat="server" ControlToValidate="resposibilities"
141 CssClass="errorMessage" ErrorMessage="Role Responsibilities are Required" ForeColor="">*</asp:RequiredFieldValidator></td>
142 </tr>
143 <tr>
144 <td align="center" style="width: 150px; height: 29px">
145 Hobbies:</td>
146 <td align="center" style="width: 200px; height: 29px">
147 <asp:TextBox ID="hobbiestxtbx" runat="server" CssClass="textareastyle" Text='<%# Bind("hobbies") %>'
148 TextMode="MultiLine" MaxLength="200"></asp:TextBox></td>
149 </tr>
150 <tr>
151 <td align="center" style="width: 150px; height: 30px">
152 Team Name:</td>
153 <td align="center" style="width: 200px; height: 30px">
154 <asp:DropDownList ID="DropDownList1" runat="server" CssClass="dropdownliststyle" DataSourceID="accessTeam"
155 DataTextField="TeamName" DataValueField="TeamID" AppendDataBoundItems="True" SelectedValue='<%# Bind("TeamID") %>'>
156 <asp:ListItem Value="" Selected="False">- Please Select -</asp:ListItem>
157 </asp:DropDownList>
158 <asp:RequiredFieldValidator ID="RequiredFieldValidator9" runat="server" ControlToValidate="DropDownList2"
159 CssClass="errorMessage" ErrorMessage="Team Name is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
160 </tr>
161 <tr>
162 <td align="center" style="width: 150px; height: 30px">
163 I am a Manager:</td>
164 <td align="center" style="width: 200px; height: 30px">
165 <asp:CheckBox ID="isManager" runat="server" Checked='<%# Bind("isManager") %>' Text="Yes" /></td>
166 </tr>
167 <tr>
168 <td align="center" style="width: 150px; height: 30px">
169 I am a Team Manager:</td>
170 <td align="center" style="width: 200px; height: 30px"><asp:CheckBox ID="isTeamManager" runat="server" Checked='<%# Bind("isTeamManager") %>' Text="Yes" /></td>
171 </tr>
172 <tr>
173 <td align="center" style="width: 150px; height: 30px">
174 MyManager is:</td>
175 <td align="center" style="width: 200px; height: 30px">
176 <asp:DropDownList ID="myManagerIs" runat="server" CssClass="dropdownliststyle" DataSourceID="MyManager"
177 DataTextField="Name" DataValueField="id" AppendDataBoundItems="true" SelectedValue='<%# Bind("teamManagerID") %>'>
178 <asp:ListItem Value="" Selected="False">- Please Select -</asp:ListItem>
179 </asp:DropDownList>
180 </td>
181 </tr>
182 <tr>
183 <td align="center" style="width: 150px; height: 30px">
184 Upload Image:</td>
185 <td align="center" style="width: 200px; height: 30px">
186 <asp:FileUpload ID="UploadedFile" runat="server"
187 Width="150px" /> </td>
188 </tr>
189 <tr>
190 <td align="center" style="width: 150px; height: 30px">
191 Image Title:</td>
192 <td align="center" style="width: 200px; height: 30px">
193 <asp:TextBox ID="imagetitle" runat="server" CssClass="textboxstyle" Text='<%# Bind("imageTitle") %>' MaxLength="30"></asp:TextBox>
194 <asp:RequiredFieldValidator ID="RequiredFieldValidator10" runat="server" ControlToValidate="imagetitle"
195 CssClass="errorMessage" ErrorMessage="Image Title is Required" ForeColor="">*</asp:RequiredFieldValidator></td>
196 </tr>
197 <tr>
198 <td align="center" style="width: 150px; height: 30px">
199 Hide This Profile:</td>
200 <td align="center" style="width: 200px; height: 30px">
201 <asp:CheckBox ID="profileHide" runat="server" Checked='<%# Bind("Display") %>' /></td>
202 </tr>
203 <tr>
204 <td align="center" colspan="2" style="height: 30px">
205 <asp:TextBox ID="TextBox1" runat="server" Text='<%# Eval("alternativeContact") %>'></asp:TextBox><br />
206 <asp:LinkButton ID="selectedContact" runat="server" OnClick="selectedContact_Click" OnClientClick="selectedContact_Click">Add Selected Contacts</asp:LinkButton></td>
207 </tr>
208 <tr>
209 <td align="center" colspan="2" style="height: 30px">
210 <asp:ValidationSummary ID="ValidationSummary1" runat="server" CssClass="errorMsgstyle"
211 ForeColor="" />
212 </td>
213 </tr>
214 </table>
215 </InsertItemTemplate>
216 <HeaderTemplate>
217
218 </HeaderTemplate>
219 </asp:TemplateField>
220 <asp:TemplateField ShowHeader="False">
221 <EditItemTemplate>
222
223 </EditItemTemplate>
224 <InsertItemTemplate>
225 <asp:LinkButton ID="btnInsert" runat="server" CausesValidation="True" CommandName="Insert"
226 Text="Insert"></asp:LinkButton>
227 <asp:LinkButton ID="btnCancel" runat="server" CausesValidation="False" CommandName="Cancel"
228 Text="Cancel"></asp:LinkButton>
229 </InsertItemTemplate>
230 <ItemTemplate>
231
232 </ItemTemplate>
233 </asp:TemplateField>
234 </Fields>
235 </asp:DetailsView>
236 <br />
237 <asp:Label ID="ErrorMessage" runat="server" CssClass="errortext"></asp:Label> <br />
238
239 </td>
240 </tr>
241 <tr>
242 <td style="width: 100px">
243 <asp:SqlDataSource ID="accessProfiles" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
244 InsertCommand="INSERT INTO [employeeDetails] ([isManager], [isTeamManager], [Name], [RoleID], , [extension], [mobile], [alternativeContact], [imageTitle], [imageMimeType], [imageData], [TeamID], [Display], [teamManagerID], [responsibilities], [hobbies]) VALUES (@isManager, @isTeamManager, @Name, @RoleID, @email, @extension, @mobile, @alternativeContact, @imageTitle, @MimeType, @imageData, @TeamID, @Display, @teamManagerID, @responsibilities, @hobbies)" >
245 <InsertParameters>
246 <asp:Parameter Name="isManager" Type="byte" DefaultValue="0" Size="1" />
247 <asp:Parameter Name="isTeamManager" DefaultValue="0" Size="1" Type="Byte" />
248 <asp:Parameter Name="Name" Type="String" />
249 <asp:Parameter Name="RoleID" Type="Int32" />
250 <asp:Parameter Name="email" Type="String" />
251 <asp:Parameter Name="extension" Type="String" />
252 <asp:Parameter Name="mobile" Type="String" />
253 <asp:Parameter Name="alternativeContact" Type="String" />
254 <asp:Parameter Name="imageTitle" Type="String" />
255 <asp:Parameter Name="MimeType" Type="String" />
256 <asp:Parameter Name="imageData" />
257 <asp:Parameter Name="TeamID" Type="Int32" />
258 <asp:Parameter Name="Display" type="Byte" DefaultValue="1" Size="0" />
259 <asp:Parameter Name="teamManagerID" Type="Int32" />
260 <asp:Parameter Name="responsibilities" Type="String" />
261 <asp:Parameter Name="hobbies" Type="String" />
262 </InsertParameters>
263 </asp:SqlDataSource>
264 <asp:SqlDataSource ID="accessrole" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
265 SelectCommand="SELECT [role], [RoleID] FROM [role] ORDER BY [role] DESC"></asp:SqlDataSource>
266 <asp:SqlDataSource ID="MyManager" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
267 SelectCommand="SELECT id, Name, isManager, isTeamManager FROM employeeDetails WHERE (isManager > 0) OR (isTeamManager > 0) ORDER BY Name DESC">
268 </asp:SqlDataSource>
269 <asp:SqlDataSource ID="accessTeam" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
270 SelectCommand="SELECT [TeamID], [TeamName] FROM [Team] ORDER BY [TeamName] ASC"></asp:SqlDataSource>
271 <asp:SqlDataSource ID="getAlternatives" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
272 SelectCommand="SELECT [Name] FROM [employeeDetails] ORDER BY [Name]"></asp:SqlDataSource>
273 </td>
274 </tr>
275 </table>
276 </asp:Content>
277
278
Thanks for your help
I need to use the list of items from a multiselect listbox in a parameter of a query's IN clause.
Example:
I assemble the list from the listbox and set the paramter value so @CityList = 'London','Paris','Rome' .... etc.
A sample SQL would be:
SELECT * FROM Customers
WHERE City IN (@CityList)
However, the SQL will not work. It seems the whole string is put in
another set of single quotes by the compiler so it's treated as one
string literal instead of a list.
Is there a way around this?
I have a listbox and SqlDataSource.
I am not sure how to take the multiple value that are selected in listbox and use it to generate a sqlquery.Below I have shown that if I hard code it in the Command statement it works but I not sure how to take it from a variable or the listbox.
----------------------------------------------------------
<asp:ListBox ID="ListBox1" runat="server" DataSourceID="SqlDataSource1" DataTextField="Name"
DataValueField="Name" SelectionMode="Multiple" Width="341px"></asp:ListBox>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT classifieds_Ads.Id, classifieds_Ads.MemberId, classifieds_Ads.CategoryId, classifieds_Ads.Title, classifieds_Ads.Description, classifieds_Categories.Name, classifieds_Ads.Price, classifieds_Ads.Location, classifieds_Ads.ExpirationDate, classifieds_Ads.DateCreated FROM classifieds_Ads INNER JOIN classifieds_Categories ON classifieds_Ads.CategoryId = classifieds_Categories.Id WHERE ([Name] IN ('ALASKA','alabama'))">
<SelectParameters>
<asp:ControlParameter Name="Name" ControlID="listbox1" PropertyName="SelectedValue" />
</SelectParameters>
</asp:SqlDataSource>
--------------------------------------------------------
Hi, I've a ListBox Web Server Control where I select a list of citiesnow I would like to create a stored procedure with the selected values... please note that I use metods like these for execute my Stored procedure public DataSet Getgfdfgh(SqlConnection connection, String IDAttivitaTipo, DateTime DataInizio, DateTime DataFine) { ConnectionState currState = connection.State; if (((connection.State & ConnectionState.Open) != ConnectionState.Open)) connection.Open(); try { SqlParameter[] parameters = new SqlParameter[3]; parameters[0] = new SqlParameter("@IDAttivitaTipo", IDAttivitaTipo); parameters[1] = new SqlParameter("@DataInizio", DataInizio); parameters[2] = new SqlParameter("@DataFine", DataFine); SqlCommand cmd = CreateStoreProcedureCommand("Getfhdfh", connection, parameters); SqlDataAdapter adapter = new SqlDataAdapter(cmd); DataSet ds = new DataSet(); adapter.Fill(ds); return ds; } finally { if ((currState == ConnectionState.Closed)) connection.Close(); } } How Can I manage a list of values ??Thanks for help me!!
View 1 Replies View RelatedHi all,I want to be able to implement what the following site shows in regards to dynamically displaying Data views of various types: http://quickstarts.asp.net/QuickStartv20/aspnet/samples/data/GridViewMasterDetails_vb.aspx I follow everything to the 'T' but for some reason all my data views are showing even before any initial selection is made in the drop down. How can I have certain grids appear only after a selection from another control has been made?Thanks in advance,Nick
View 1 Replies View RelatedHi There
This is probably realy simple but since im still a newbie some help would be appreciated. I have a listbox bound to an sqldatasource which has names of people from my sql database employeeDetails table. I simply want to allow someone to select to select multiple names and insert them into another field in my database.
I have this bit workng, ie they can select multiple people on the list, it does insert, however only the first selected name, not the others.Can you please help me out
Kind Regads
Dan
Hi,
I have an ASP.NET form that stores it's data in MSDE but I just added a multi-select ListBox to the form and I'm having a hard time coming up with a way of writing that data to the database. Should I write the values into a column on the same table where I store the rest of the data from the form (values separated by a comma) or shouild I create another table (one to many) and store the data there. I like the second option, but I'm not sure how to loop through each value and write it to the database table.
I grab the values for the selection as follow:
foreach (ListItem lstItem in lbAttendees.Items)
{
if (lstItem.Selected == true)
{
grpList.Add(lstItem.Value.ToString());
}
}
but I'm not sure on what to do next and could use some help.
Thanks
Germano
Any ideas on how I can send multiple values from a listbox to a stored procedure? right now I have a ListBox Control called lbCategory, and I want to pass multiple selected items to a stored procedure.
<asp:SqlDataSource ID="dsFS" runat="server" ConnectionString="someConnectionString" SelectCommand="usp_FS" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="lbCategory" DefaultValue="%" Name="category" PropertyName="SelectedValue" type="String" />
</SelectParameters>
</asp:SqlDataSource>
hi i have a listbox with selectedmode = multiple, i am currently using this code in my code behind (c#) to call the storedprocedure within the datasource but its not working: Do i have to write specific code in c# to send the mulitple values through?protected void confButton_Click(object sender, EventArgs e)
{
try
{foreach (ListItem item in authorsListBox4.Items)
{if (item.Selected)
{
AddConfSqlDataSource.Insert();
}
}saveStatusLabel.Text = "Save Successfull: The above publication has been saved";
}catch (Exception ex)
{saveStatusLabel.Text = "Save Failed: The above publication failed to save" + ex.Message;
}
}
I have a ListBox controls that contains about 5 items. A stored procedure is executed based on selections of other controls ont he screen, but I cann't figure out how to properly get the dynamically selected conditions passed to the sproc from C#.
If a user selects 3 of the five items, the sproc needs to build something like this:
WHERE Region LIKE Item1 OR Region LIKE Item2 OR Region LIKE Item3
I cannot figure out how to do this. It works properly if I just make the ListBox SelectionMode as Single and pass that one selected item's value.
Any help is greatly appreciated.
Thanks,
Chris
NET 2.0
I am using Visual Studio Express 2005 for database web developement.
I have created a database with 5 tables. Two are associative tables.
They are
SoftwarePK SoftwareID Title
SoftwareSolutionFK SoftwareIDFK SolutionID
SolutionPK SolutionID Title
CategorySolutionFK CategoryFK Solution
Category
PK Category Title
Criteria for a search with three sources of input into a SqlDataSource attached to a FormView for paged out.
The following are the Search Criteria input sources:1) ListBox in Multiple Selection Mode2) CheckBoxList with Mutiple checks posible2) TextBox with key word search in Title.
Each Solution has 0 or many Categories and 0 or many Software.
When the records are entered in the database, the associative information for Categories and Software are populated to filter thereturned values.
In NET 1.1, I would create a search string like the following in code behind by looping through the CheckBoxList and ListBox finally adding the TextBox:
SELECT Solution.SolutionID, Solution.Title FROM SolutionWHERE Solution.SolutionID IN ('2','3','5') AND Solution.Title LIKE '%Math%'
I am unable to update the SelectCommand in the ASPX page.
However, when I use the I have used theSystem.Web.UI.WebControls.SqlDataSources"SelectQuery Builder"I receive the following in the Source for ASPX: <asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT Solution.SolutionID, Solution.Title
FROM
Solution INNER JOIN CategorySolution ON Solution.SolutionID = CategorySolution.SolutionID
INNER JOIN SoftwareSolution ON Solution.SolutionID = SoftwareSolution.SolutionID">
<SelectParameters>
<asp:ControlParameter ControlID="CheckBoxList1" DefaultValue="%" Name="CategoryID" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="ListBox1" DefaultValue="%" Name="SoftwareID" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="txtTitleSearch" DefaultValue="%" Name="Title" PropertyName="Text" />
</SelectParameters>
</asp:SqlDataSource> I receive duplicate records and not sure if the code generated accesses the Mutiple Selected values in the CheckBoxList1 and ListBox1.Question: 1) If the SelectQuery generator will not access multiple selected values from the CheckBoxList1, how can I use code behind to replaceSelectCommand in the ASPX page?2) What is the best solution for using the CheckBoxList1, ListBox1, and TextBox for filtering my results? Sample code, references to solutions, corrections on logic, a new approach, how to use the wizard correctly would all be greatly appreciated.3) Can Multiple Selection Controls be use with a SqlDataSource SELECT Command?Thanks for your time,Sincerely,Unhistoric
I'm trying to run something like this:
Select ID, FIRST(forename), FIRST(surname) from table1
GROUP BY ID;
I know First doesn't work in TSQL, I used to use it in Access and now need to run something like that in TSQL. Simply getting unique ID with first forename and surname, cause there are some dupes in a table.
There are records like:
ID forename surname
--------------------------------
1 John Kormack
1 James Dope
2 Erin Dupes
3 Will Hugh
3 Walter Heisenberg
So I want to pull out:
1 John Kormack
2 Erin Dupes
3 Will Hugh
How can I run it in TSQL?
I am trying to insert a message into my database for every "league" I have in the database. I would like to do this in one sproc but am not sure how this would be done. Here is the loop if it has to be done outside of sql
Code:
message = "This is a test message."
leagues[] = getAllLeaguesInSite()
begin transaction
for each league in leagues
insertLeagueMessage(league, message)
if noErrors
commit transaction
else
rollback transaction
-----
as you can see it would be nice to be able to do this all in mssql . If it can be done please let me know.
Thanks
How can I add multiple rdlc report definitions to a single Winforms ReportViewer control? I would like to start with the first rdlc and concatenate subsequent rdlc files after that. I want the user to be able to scroll through several different rdlc report definitions as if they were all just one report.
Hello all,
Is there documentation somewhere about multiple execution paths in SSIS control flow? I didn't find documentation anywhere. I have a situation where I have two tasks that take considerable time, but could be executed in parallel (to speed up things) and I was wondering whether SSIS supports parallelism.
To illustrate the issues in simultaneous execution, I created a test SSIS package. In the package, I have five tasks, let's call them T1, T2, T3, T4 and T5. The taks are connected with "green arrows" like this:
T1->T2
T1->T3
T2->T4
T3->T4
T5 is not connected. The tasks can be e.g. Send Mail tasks, that's not relevant to this issue. I put a breakpoint in each task and execute the package.
When I execute package, T1 and T5 become active, i.e. the arrow that displays where the package execution currently is, is in two tasks simultaneously. Now F10 (step over) doesn't seem to work "Unable to step. Not implemented". If I press F5 nothing happens. After I press F5 for a second time tasks T1 and T5 and executed. Why don't they execute with the first pressing of F5? I would additionally like to know whether these two tasks are executed in parallel or sequentially, i.e. in the same thread or in two threads? Is there documentation of this?
The execution stops at T2&T3. Again, pressing F5 doesn't do anything, but the second time I press F5 T2 and T3 are executed.
Hello Everyone,
I have a report which runs in local mode and while designing the report I have placed a single image control inside the list box as I don't know before hand how many images are there :
What is the way to show all the images using the one image control inside the report viewer control. ? Can be 2 or 3 or 4.....
Thanks for all the help.
Harsimrat
Dear Friends,
In my report, I am having Listbox for users to choose Country, City & Company.
The user can choose Country. Based on the country selection, cities will be listed out.
Based on the city selection, Companies will be listed out.
They can choose companies.
Now, I have to show two set of results.
A. List of Companies as per selection ( dataset with equal to selection )
B. List of Companies which are not selected ( ie dataset with not equal to selection )
I have created a dataset with all companies and filter it by selection. When I tried with the filter option in the Dataset, I am able to check for only one value and not for multiple value. If the selection is one company, then I can filter it. But if they choose 5 companies, I am not not able to filter it. Is there any other option I can try out.
Please advice. Thanks.
warm regards
Rakin
Singapore.
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.
----------------------------
Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand)
----------------------------
An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select
ID,
a,
b,
c,
d
from DATASET.dbo.Table
where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
I have attached the results of checking an Update sproc in the Sql database, within VSS, for a misbehaving SqlDataSource control in an asp.net web application, that keeps telling me that I have too many aurguments in my sproc compared to what's defined for parameters in my SQLdatasource control.....
No rows affected.
(0 row(s) returned)
No rows affected.
(0 row(s) returned)
Running [dbo].[sp_UPD_MESample_ACT_Formdata]
( @ME_Rev_Nbr = 570858
, @A1 = No
, @A2 = No
, @A5 = NA
, @A6 = NA
, @A7 = NA
, @SectionA_Comments = none
, @B1 = No
, @B2 = Yes
, @B3 = NA
, @B4 = NA
, @B5 = Yes
, @B6 = No
, @B7 = Yes
, @SectionB_Comments = none
, @EI_1 = N/A
, @EI_2 = N/A
, @UI_1 = N/A
, @UI_2 = N/A
, @HH_1 = N/A
, @HH_2 = N/A
, @SHEL_1 = 363-030
, @SHEL_2 = N/A
, @SUA_1 = N/A, @SUA_2 = N/A
, @Cert_Period = 10/1/06 - 12/31/06
, @CR_Rev_Completed = Y ).
No rows affected.
(0 row(s) returned)
@RETURN_VALUE = 0
Finished running [dbo].[sp_UPD_MESample_ACT_Formdata].
The program 'SQL Debugger: T-SQL' has exited with code 0 (0x0).
And yet every time I try to update the record in the formview online... I get
Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Procedure or function sp_UPD_MESample_ACT_Formdata has too many arguments specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I have gone through the page code with a fine tooth comb as well as the sproc itself. I have tried everything I can think of, including creating a new page and resetting the fields, in case something got broken that I can't see.
Does anyone have any tips or tricks or info that might help me?
Thanks,
SMA49
I'm sorta new with using stored procedures and I'm at a loss of how to achieve my desired result.
What I am trying to do is retrieve a value from a table before it is updated and then use this original value to update another table. If I execute the first called sproc in query analyzer it does return the value I'm looking for, but I'm not really sure how to capture the returned value. Also, is there a more direct way to do this?
Thanks,
Peggy
Sproc that is called from ASP.NET:
ALTER PROCEDURE BP_UpdateLedgerEntry
(
@EntryLogID int,
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2)
)
AS
DECLARE@OldCategoryID int
EXEC @OldCategoryID = BP_GetLedgerCategory @EntryLogID
UPDATE
BP_EntryLog
SET
ProjectID = @ProjectID,
CategoryID = @NewCategoryID,
Expended = @Expended
WHERE
EntryLogID = @EntryLogID
EXEC BP_UpdateCategories @ProjectID, @NewCategoryID, @Expended, @OldCategoryID
Called Sprocs:
*********************************************
BP_GetLedgerCategory
*********************************************
ALTER PROCEDURE BP_GetLedgerCategory
(
@EntryLogID int
)
AS
SELECT CategoryID
FROM BP_EntryLog
WHERE EntryLogID = @EntryLogID
RETURN
*********************************************
BP_UpdateCategories
*********************************************
ALTER PROCEDURE BP_UpdateCategories
(
@ProjectID int,
@NewCategoryID int,
@Expended decimal(10,2),
@OldCategoryID int
)
AS
UPDATE
BP_Categories
SET CatExpended = CatExpended + @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @NewCategoryID
UPDATE
BP_Categories
SET CatExpended = CatExpended - @Expended
WHERE
ProjectID = @ProjectID
AND
CategoryID = @OldCategoryID
create procedure dbo.GetZipID( @City varchar(30), @State char(2), @Zip5 char(6))
as
DECLARE @CityID integer
declare @StateID integer
declare @ZipID integer
set @ZipID=2
set @Zip5=lTrim(@Zip5)
if @Zip5<>''
SET @ZIPID = (select Min(lngZipCodeID) AS ZipID from ZipCodes where strZipCode=@Zip5)
if @ZipID is null
set @CityID= EXEC GetCityID(@City);
set @StateID= EXEC GetStateID(@State);
insert into ZipCodes(strZipCode,lngStateID,lngCityID) values(@Zip5,@StateID,@CityID)
if @@ERROR = 0
SET @ZIPID = @@Identity
select @ZIPID
GetCityID and GetStateID are two stored procs, how do I execute those two stored procs
in the above stored proc? I mean what is the syntax??
Tks
I am wandering how to "Properly do this" Without doing a dynamic SP. How do I do a search with the multiple listbox data. What do I pass the stored procedure?
SELECT ID, LAST_NAME || ', ' || FIRST_NAME AS FULLNAMEFROM BIT_USER1WHERE (TYPE_ID = 1) OR (TYPE_ID = 3) OR (TYPE_ID = 4) OR (TYPE_ID = 5) OR (BLDG_ID = 1) OR (BLDG_ID = 2)ORDER BY LAST_NAME, FIRST_NAME
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies View RelatedHi. I want to use a FilterExpression in my sqldatasource that verify if a value is in a listbox with several values. How can I do that? Thanks
View 3 Replies View RelatedSorry if this is to basic but I am just starting out. Any help is appreciated.
Basically I am attempting to populate a listbox with items from a MSSQL DB so the user can select either one or multiple items in that listbox to search on.
Hi everyone, having some problems
Basically, using ASP.NET 2.0 and here is my problem,
Get data from table
Put into array
Split where there is a +
remove +'s
assign to listbox to give a list of everything in that table
The + split the courses, so in my Order table I have A + B + C etc and I want all of the different options in a list box (note different records have different entries it isn't always a b c)
I am testing my code, here is what I got
Public Sub TitleChange(ByVal Sender As Object, ByVal E As EventArgs) Try Dim DBConn As SqlConnection Dim DSPageData As DataSet = New DataSet() Dim VarTxtAOE As String DBConn = New SqlConnection("Server=SD02;Initial Catalog=WhoGetsWhat;Persist Security Info=True;UID=x;Password=XXX") 'Dim DBDataAdapter As SqlDataAdapter DBDataAdapter = New SqlDataAdapter("Select AOE FROM TBL_Role WHERE Title = @ddlTitle", DBConn) DBDataAdapter.SelectCommand.Parameters.Add("@ddlTitle", SqlDbType.NVarChar) DBDataAdapter.SelectCommand.Parameters("@ddlTitle").Value = TitleDropDown.SelectedValue DBDataAdapter.Fill(DSPageData, "Courses") 'Need to find out what this rows business is about whats the number about? and am I doing it correct? 'txtAOE.Text = DSPageData.Tables("Courses").Rows(0).Item("AOE") 'txtAOE.Items.Add(New ListItem(DSPageData.Tables(0).Rows(0).Item("AOE"))) VarTxtAOE = DSPageData.Tables("Courses").Rows(0).Item("AOE") Dim VarArray() As String = VarTxtAOE.Split("+") Response.Write(VarArray()) txtAOE.DataSource = VarArray() txtAOE.DataBind() 'Response.Write(test) 'ListBox1.DataSource = test 'Response.Write(VarArray) Catch TheException As Exception lblerror.Text = "Error occurred: " & TheException.ToString() End Try End Sub My response.Write works correctly, but my list box doesn't, also I don't want to say which bit of the array like I have done using 1, I just want to display the whole array in my list box. I am not worrying about removing the +'s at the minute, just splitting my data and putting each section into a listbox
Maybe I am going about this the wrong way, but I have been trying a lot of different things and its hard to find any help
Thanks
Chris
Hi. With VWD i've produced the following code.<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:50469ConnectionString %>"SelectCommand="SELECT * FROM [ibs] WHERE ([liedID] = @liedID)"><SelectParameters><asp:ControlParameter ControlID="ListBox1" Name="liedID" PropertyName="SelectedValue" Type="Int16" />But the query is only returning one row of the table. Even when multiple values were selected in the ListBox1. Could someone tell me how to do?Thanks, Kin Wei.
View 2 Replies View RelatedHi There,
I am having a 1st listbox which is populating production lines, 2nd combobox to populate the production units. From here , the user will be able to select multiple production units from the combobox and hence populate the variable in listbox 3.
This is the query that I'm using to query on the variable table:
'SELECT DISTINCT PU_Id,Var_Id,Var_Desc from Variables
where PU_Id IN (@ProductionUnits)'
The problem now is that this would return all the variables for the selected production units and for those variables that have the same name, they would appear in the listbox as duplicates.
I wonder if there's any way to filter off or remove the duplicates in the listbox 3 by using sql query?
Thanks in advance for the help.
ksyong17
How can i get ALL the selected items into the database? this loop only accepts one item. I have tried with a "clear" action, does not work.... protected void Button2_Click(object sender, EventArgs e) { if (Page.IsValid) { // Define data objects SqlConnection conn; SqlCommand comm; // Open the connection string connectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString; // Initialize connection conn = new SqlConnection(connectionString); // Create command comm = new SqlCommand("INSERT INTO TestTabel (TestNavn) VALUES (@TestNavn)",conn); // Add command parameters foreach (ListItem item in TestListBox.Items) { if (item.Selected) { comm.Parameters.Add("@TestNavn", System.Data.SqlDbType.NVarChar); comm.Parameters["@TestNavn"].Value = Item.Text; } } // Enclose database code in Try-Catch-Finally try { // Open the connection conn.Open(); // Execute the command comm.ExecuteNonQuery(); // Reload page if the query executed successfully Response.Redirect("Default.aspx"); } catch(Exception Arg) { Response.Write(Arg.Message); // Display error message Label1.Text = "Error !"; } finally { // Close the connection conn.Close(); } } }
View 1 Replies View RelatedHi,
I have SQL database 2000 which has one table Sheet1, I retrieved the columns in the ListBox, then chosed some of them and moved it to ListBox2.
The past scenario worked great, and I checked the moved values, it was succesfully moved, but when I tried to copy the values in ArrayList to do a select statement it didn't worked at all.
public string str;protected void Button3_Click(object sender, EventArgs e)
{ArrayList itemsSelected = new ArrayList(); string sep = ",";
//string str;for (int i = 0; i < ListBox2.Items.Count; i++)
{if (ListBox2.Items[i].Selected)
{
itemsSelected.Add(ListBox2.Items[i].Value);
}
int itemsSelCount = itemsSelected.Count; // integer variable which holds the count of the selected items.
str = ListBox2.Items[i].Value + sep;
Response.Write(str);
}
SqlConnection SqlCon = new SqlConnection("Data Source=AJ-166DCCD87;Initial Catalog=stat_rpt;Integrated Security=True;Pooling=False");
String SQL1 = "SELECT " + str + " from Sheet1"; SqlDataAdapter Adptr = new SqlDataAdapter(SQL1, SqlCon);
SqlCommandBuilder CB = new SqlCommandBuilder(Adptr);DataTable Dt = new DataTable();
Adptr.Fill(Dt);
//return Dt;
GridView1.DataBind();
SqlCon.Close();
}
I did some changes and the new error message is
Incorrect syntax near the keyword 'from'.
Thank you