I just discover the result for my query that had use the function dateDiff seems to be in-correct, no matter what's the date, the dateDiff always return a zero. Am I using it in-correctly? select DateDiff(mm,11/1/2004, 12/31/2005) SELECT component_id, component_description,SUM(CASE DateDiff(mm,date_complete,'12/31/2004')WHEN 2 THEN component_qty ELSE 0 END) AS mm1,SUM(CASE DateDiff(mm,date_complete,'12/31/2004')WHEN 1 THEN component_qty ELSE 0 END) AS mm2,SUM(CASE DateDiff(mm,date_complete,'12/31/2004')WHEN 0 THEN component_qty ELSE 0 END) AS mm3,sum(component_qty) as totalFROM view_jobcomponent WHERE date_complete between '10/1/2004' and '12/31/2004' GROUP BY component_id, component_descriptionorder by component_id, component_description
I've been trying to create a function that returns the difference, in months, between two dates. The DateDiff function (m) returns an integer, but I really need a decimal. I could return the days instead, but it would be difficult to figure out how the number of months from this, especially when the dates span multiple years and I need to adjust for leap year. Does anyone know of a resource that might have a solution for this?
I have a query and am trying to just return the difference between two dates but not include weekends.For instance, if I have 08/21/2006 - 08/28/2006, there are 6 weekdays. I tried this, but I am getting 7 as a result.SELECT DATEDIFF(weekday, request_start_date, request_end_date) AS days_off, request_id FROM request Any help would be greatly appreciated.
Dear all, I have the Following Query:SELECT DATEDIFF(day, GETDATE(), RECENT_RESERVATION)AS Expr1,RECENT_RESERVATION FROM EMP WHERE SUN=empName;when i run it inside the query analyzer, it returns two columns. but if run it inside The ASPX page it retuns only one column wich is RECENT_RESERVATION date.Note: i am using one methode that takes care of reading from SQL and assigning the result into an array, it works fine everywhere, but with this query it dosen't work. Any suggestions??
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT) The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO. returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
If I wanted to get everyone DOB who is over 18 how would I do that? I am currently trying something like this, but no luck...
Declare @todays_date datetime
Select from person CASE WHEN dateadd(year, datediff (year, Date_Of_Birth, @Todays_Date), Date_Of_Birth) > @Todays_Date -- Date of Birth check THEN datediff (year, Date_Of_Birth, @Todays_Date) - 1 ELSE datediff (year, Date_Of_Birth, @Todays_Date) END >= 18
I'm using a datediff(mi, start, stop) to get the duration of an operation. i want it displayed in HH:MM format. can anyone help me w/ a way to do that????
SELECT weight FROM progress WHERE dateInput = (SELECT MAX(dateInput) FROM progress) AND memberID = 1
The problem is that the MAX dateInput doesn't belongs to memberID 1. It belongs to memberID 2. What I want is that I wanna choose the MAX Date of memberID 1. I thought of maybe using datadiff function. But I don't know how to make the datediff statement. Maybe I can write the datediff statement whereby the least datediff between the dateInput and getdate() will be the row I want. I really appreciate the person that helps me this problem... Thanks 1st of all!
I am trying to select records from whatever the current date would be and 12 months before whatever the current date is. How would I go about doing this. The table that I am trying to do this with has a year column and a month column.
I was playing with the date diff function, but I can only get dates from the specified date range. I need it to be where if I run it tomorrow, it will get that day and everything within the last 12 months.
Hi there i am using the datediff funtion but it does not seem to be inclusive of the two dates eg SELECT DATEDIFF(day, s_Date, e_date) AS NumberOfDays,* FROM weekendtest
i know i could do SELECT DATEDIFF(day, s_Date, e_date)+1 AS NumberOfDays,* FROM weekendtest
but i was just wondering if there some other function i should use that would be more appropriate
Hi I've a problem!!! i want to use datediff thats no problem. But the first parameter has to be parameterised. What datatype do i declare it as. i declare it as varchar it returns me an error : Invalid parameter 1 specified for datediff.
i'm doing this in a stored procedure.
Is there a way out or do i've to use the good old 'IF' or 'Case' ?
Hi, I have a Table Where I have Two Date columns and I want to find the Differnce in the 3rd column.ie DateReceived - AsOnDate = NoofDays.I tried this code SELECT SRNO,CONVERT (VARCHAR,AsonDate,102)as ASONDATE,CONVERT(VARCHAR, DateReceived, 102) AS DateReceived,CONVERT(VARCHAR, DateAcknowledged, 102) AS NoofDays, sum(CASE WHEN DATEDIFF(DAY, DATERECEIVED,ASONDATE, GETDATE()) FROM Details
This is my function, it returns SQLDataReader to DATALIST control. How to return page number with the SQLDataReader set ? sql server 2005, asp.net 2.0
Function get_all_events() As SqlDataReader Dim myConnection As New SqlConnection(ConfigurationManager.AppSettings("...........")) Dim myCommand As New SqlCommand("EVENTS_LIST_BY_REGION_ALL", myConnection) myCommand.CommandType = CommandType.StoredProcedure
Dim parameterState As New SqlParameter("@State", SqlDbType.VarChar, 2) parameterState.Value = Request.Params("State") myCommand.Parameters.Add(parameterState)
Dim parameterPagesize As New SqlParameter("@pagesize", SqlDbType.Int, 4) parameterPagesize.Value = 20 myCommand.Parameters.Add(parameterPagesize)
Dim parameterPagenum As New SqlParameter("@pageNum", SqlDbType.Int, 4) parameterPagenum.Value = pn1.SelectedPage myCommand.Parameters.Add(parameterPagenum)
Dim parameterPageCount As New SqlParameter("@pagecount", SqlDbType.Int, 4) parameterPageCount.Direction = ParameterDirection.ReturnValue myCommand.Parameters.Add(parameterPageCount)
myConnection.Open() 'myCommand.ExecuteReader(CommandBehavior.CloseConnection) 'pages = CType(myCommand.Parameters("@pagecount").Value, Integer) Return myCommand.ExecuteReader(CommandBehavior.CloseConnection) End Function
Variable Pages is global integer.
This is what i am calling DataList1.DataSource = get_all_events() DataList1.DataBind()
How to return records and also the return value of pagecount ? i tried many options, nothing work. Please help !!. I am struck
I'm trying to create a report that's based on a SQL-2005 Stored Procedure.
I added the Report Designer, a Report dataset ( based on a shared datasource).
When I try to build the project in BIDS, I get an error. The error occurs three times, once for each parameter on the stored procedure.
I'll only reproduce one instance of the error for the sake of brevity.
[rsCompilerErrorInExpression] The Value expression for the query parameter 'UserID' contains an error : [BC30654] 'Return' statement in a Function, Get, or Operator must return a value.
I've searched on this error and it looks like it's a Visual Basic error :
Hi, I am facing problem rite now.. I want to calculate the date different minutes between 23:00:00 and 01:00:00. My code : datediff(Minute,'01:00:00','23:00:00') The result is 1320 minutes. (22 hours)... But, the result that I want is 120 minutes (2 hours).... Can anybody help ??? Thanks in advance...
I'm trying to use the same select statement I used in classic SQL, but it isn't working. I get a "The server tag is not well formed." error. I'm trying to return all the records where the date in a particular field are over 60 days old. My select statement is: "SELECT [ReNewAd], [Male or Female], [File2], [PHOTO], [First Name], [Last Name], [City], [State], [NewAd] FROM Members Where ('NewAd' IS NOT NULL AND (DateDiff('d', [NewAd], '" & Now() & "') <= 60)) order by [NewAd] Desc" I've been looking through the datediff posts, but I'm not making any sense of what I'm reading. Can anyone see what I'm doing wrong? Thanks, Diane
I'm trying to create a stored procedure that will return a set of data. An input parameter (if specified) will determine what topics will be show based on the date the item "datetime". ALTER PROCEDURE [dbo].[discussions_GetTopics]@board_id as int,@PageNumber INT,@TopicsDays INT = NULL,@TopicsPerPage INT,@HowManyProducts INT OUTPUTAS-- Declare the table that will store all the topics for the given board_idDECLARE @Topics TABLE(RowNumber INT,topic_id INT,topic_title VARCHAR(50),topic_replies INT,topic_views INT,topic_type INT,post_id int,post_time DATETIME,Topic_Author_UserName nvarchar(256),Topic_Author_ID uniqueidentifier,Post_Author_Username nvarchar(256),Post_Author_ID uniqueidentifier)-- populate the tableINSERT INTO @TopicsSELECT ROW_NUMBER() OVER (ORDER BY discussions_topics.topic_id), discussions_Topics.topic_id, discussions_Topics.topic_title, discussions_Topics.topic_replies, discussions_Topics.topic_views, discussions_Topics.topic_type, discussions_Posts.post_id, discussions_Posts.post_time, user_1.UserName AS Topic_Author_Username, user_1.UserId AS Topic_Author_ID, user_2.UserName AS Post_Author_Username, user_2.UserId AS Post_Author_IDFROM discussions_Topics INNER JOIN discussions_Posts ON discussions_Posts.post_id = discussions_Topics.topic_last_post_id INNER JOIN aspnet_Users AS user_1 ON user_1.UserId = discussions_Topics.topic_poster INNER JOIN aspnet_Users AS user_2 ON user_2.UserId = discussions_Posts.poster_idWHERE (discussions_Topics.board_id = @board_id ANDCASE @TopicsDays WHEN '1' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 1 WHEN '2' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 7 WHEN '3' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 14 WHEN '4' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 30 WHEN '5' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 90 WHEN '6' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 180 WHEN '7' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 365END)-- return the total number of products using an OUTPUT variableSELECT @HowManyProducts = COUNT(topic_id) FROM @Topics-- Return the specified page of topicsSELECT * from @TopicsWHERE RowNumber > (@PageNumber - 1) * @TopicsPerPageAND RowNumber <= @PageNumber * @TopicsPerPage I need help where the "CASE @TopicsDays WHEN '1' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 1 WHEN '2' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 7 WHEN '3' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 14 WHEN '4' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 30 WHEN '5' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 90 WHEN '6' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 180 WHEN '7' THEN DATEDIFF(day, discussions_Topics.topic_time, getdate()) <= 365 END" Is... Im not doing it right. Can someone help me?
hello, i have a Pictures table: PictureID, Name, Description, DateAdded (GETDATE() when insert), IsActive... i need to make some stored procedures to show me the pictures added in last 24hours, in last 3 days, last 2 weeks and so on the pictures added in database are active (available to be seen by users) only 1yaer after the date added I tryied to make a stored procedure (in fact i maked a lots of them, for 1day 3 days 1 week 1 month), but i have a problem with that DateDiff and DateAdd Here is what i tryied CREATE PROCEDURE LastAdded_2monthsAgo
AS
SELECT Pictures.ProductID, Pictures.Name, Pictures.Description, Pictures.DateAdded FROM Pictures WHERE (DATEDIFF(month, Pictures.DateAdded, GETDATE()) >= 0) AND (DATEDIFF(month, Pictures.DateAdded, GETDATE()) <= 2) ORDER BY DateAdded DescI have a feeling that is wrong, please make your own version and show me what i should write...I don't know what should be first the today date or the DateAdded...i need to select the last added products from a specific interval of time...Should i do something with that "1 year available" like WHERE (DATEDIFF(month, GETDATE(), DATEADD(year, 1, Products.DateAdded)) >= 0) AND (DATEDIFF(month, GETDATE(), DATEADD(year, 1, Products.DateAdded)) <= 2) I am sure is a stupid thig up there...if you can, make your own version how you would do it and show me..please help me
Hi,I'm using the datediff function to display the ages of the users in my database. However the age rounds up once they are 35.5 etc...I could create another function which works similar to the DateDiff function, but use math.floor to always round down, but I need to use this function in a SQL statement WHERE clause. Is there any way around this?Thanks,Curt.
This is a sql question, so I'm hoping someone can give me some direction. I need to query a table and return all rows where the individual is >= 18 years of age. It should involve simply subtracting the date of birth from the current date. I thought the answer would be so simple: select * from table where datediff(yy,dob,getdate()) >= 18 Unfortunately, the results are inconsistent. The DATEDIFF function, it appears, will not show correct results down to the month/day level. I tried posting this on a sql server forum, but the recommendations I received involved coding some gigantic function. It seems that there ought to be a simple 'WHERE' clause which could solve this. If someone knows of a silver bullet, I would surely appreciate your advice. Thank you.
I'm trying to include a DATEDIFF compare in my Where clause, but it seems to ignore the comparison I'm trying to invoke, and just returns all rows. When I display the result of the DATEDIFF command, it looks good, but I can't seem to have it incorporated in my Where clause. The following is my code - select [Pkg ID], [Elm (s)], [Type Name (s)], [End Exec Date], [End Exec Time] from pkgactions WHERE (8 > DateDiff(year, [End Exec Date], GetDate() )) order by [pkg id]
I have two fields in one of my database table. They are date fields, one for the start and the other for the end of the "problem solving". What I want to do is to show the concrete elapsed time between the two.
My first problem is that I'm not able to show hour AND minutes. I wrote this for instance: SELECT DATEDIFF(hour, fld_date_debut, fld_date_fin) As elapsed_time I tried HH:mm instead of hour, but it is not working.
My second problem is that I can have more than one start and end hour for the same "problem solving". In the database it's like:
start hour: 10:00 End hour: 11:00 Number of the problem: 1 start hour: 13:00 End hour: 16:00 Number of the problem: 1
So I would like to add these to my elapsed time. I want (11:00 - 10:00) + (16:00 - 13:00)...but how can i do this in my SQL query ?
Im currently using the DateDiff function to filter my DateTime columns but am finding it somewhat troublesome. Currently I am having to write the same select statement 3 times if I want to filter by month, year or all (ignoring dates).
To find @PurchaseTotal for the year, I have to write the following:
SELECT @PurchaseTotal = Sum(PurchaseTotal) FROM _Expenses WHERE DateDiff(yyyy, DateOf, @IntervalDate) = @Interval
To find @PurchaseTotal for a month, I have to write the following:
SELECT @PurchaseTotal = Sum(PurchaseTotal) FROM _Expenses WHERE DateDiff(mm, DateOf, @IntervalDate) = @Interval
To find @PurchaseTotal for all the records, I have to write the following:
SELECT @PurchaseTotal = Sum(PurchaseTotal) FROM _Expenses
Error says something like "incorrect parameter 1 for DateDiff."
It seems you have to write a different select statement for month, day and year. Also If you want a total from all the records you have to write yet another select statement.
Does anyone know of a DateTime function that allows parameters to specify for month, day and Year? Also does anyone know of a DateTime function that works like the COALESCE function to where you can send it a NULL value and give you all the records?
Hi im having som problems using the dateDiff, 1. Im not really sure what row's to grap, 2.Im getting this error saying somthing like : "None-spicefied Function GetDate" "sry for the bad translation, im getting the error's in danish and my englich is not to good :)" Any help would be very nice =) ----------------------------------- Code ----------------------------------- This is my clas.
Function NewSearch () As DataTable Dim objData As New DataAccess
Dim strSQL As String = "SELECT datediff(mm, GetDate(), Repair) FROM Used_Cars"
Return objData.GetDataAccess(strSQL, _strDatabase) End Function
And this is my default.aspx.vb .
Protected Sub action_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles action.Click Dim Search As New carFactory Dim dtMaerker As DataTable dtMaerker = Search .NewSearch () For Each Row As DataRow In dtMaerker.Rows ' "Repair" contains som date's lblIndhold.Text = Row.Item("repair") & "<br />" Next End Sub
can anyone tell me how to write a query which you could use like a hotel wakeup call system with an email sent instead of a phone call. the fields in the table would only be the target email address and date/time of the event. i suspect the query would run on a 10 minute meta-refresh asp page containing the email broadcast app along with the query.
Hi I'm trying to break down some code to work out how it's working. I've encountered DateDiff and DateAdd and I think this adds a new date of midnight today after reading up on the syntax (still dont fully understand how it works to be honest)
SELECT DATEADD(dd, DATEDIFF(dd, 0, GETDATE()), 0)
However, this is slightly different because where there is a 0 above there is a 13 in this one so I'm wondering what the 13 is actually doing.
Hi Everyone I have a table that stores information that is used to help monitor the issuing of safety clothing. I have a Transact SQL procedure that checks if a user has had an item within the last year. THe procedure returns values:
1 the item does not exist for any user so insert 2 the item exists but was issued more than a year ago so insert 3 the iem exists but was issued within one year so do not insert
I had some help from this forum initially and I thought that I had finally solved this problem but it still is not quite right. Please could someone take a quick look and point me in the right direction