Using Passed Parameters In A Select Statement
Aug 21, 2007
hello all, im trying to run a select statement using a parameter, but am having extreme difficulties. I have tried this about 50 different ways but i will only post the most recent cause i think that im the closest now than ever before ! i would love any help i can get !!!
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
Dim pageID As StringpageID = Request.QueryString("ID")
TextBox13.Text = pageID 'Test to make sure the value was stored
SqlDataSource1.SelectParameters.Add("@pageID", pageID)
End Sub
....
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ProviderName=System.Data.SqlClient ConnectionString="Data Source=.SQLEXPRESS;Initial Catalog=software;Integrated Security=True;User=something;Password=something" 'SelectCommand="SELECT * FROM Table1 WHERE [ClientID]='@pageID' ></asp:SqlDataSource>
The error that i am getting, regardless of what i put inside the ' ' is as follows:
"Conversion failed when converting the varchar value '@pageID' to data type int."
anyone have any suggestions ?
View 2 Replies
ADVERTISEMENT
May 30, 2006
Trying to insert into a history table. Some columns will come fromparameters sent to the store procedure. Other columns will be filledwith a separate select statement. I've tried storing the select returnin a cursor, tried setting the values for each field with a separateselect. Think I've just got the syntax wrong. Here's one of myattempts:use ESBAOffsetsgoif exists(select * from sysobjects where name='InsertOffsetHistory' andtype='P')drop procedure InsertOffsetHistorygocreate procedure dbo.InsertOffsetHistory@RECIDint,@LOB int,@PRODUCT int,@ITEM_DESC varchar(100),@AWARD_DATE datetime,@CONTRACT_VALUE float,@PROG_CONT_STATUS int,@CONTRACT_NUMBER varchar(25),@WA_OD varchar(9),@CURR_OFFSET_OBL float,@DIRECT_OBL float,@INDIRECT_OBL float,@APPROVED_DIRECT float,@APPROVED_INDIRECT float,@CREDITS_INPROC_DIRECT float,@CURR_INPROC_INDIRECT float,@OBLIGATION_REMARKS varchar(5000),@TRANSACTION_DATE datetime,@AUTH_USERvarchar(150),@AUTHUSER_LNAMEvarchar(150)asdeclare@idintinsert into ESBAOffsets..HISTORY(RECID,COID,SITEID,LOB,COUNTRY,PRODUCT,ITEM_DESC,AWARD_DATE,CONTRACT_VALUE,PROG_CONT_STATUS,CONTRACT_TYPE,FUNDING_TYPE,CONTRACT_NUMBER,WA_OD,PM,AGREEMENT_NUMBER,CURR_OFFSET_OBL,DIRECT_OBL,INDIRECT_OBL,APPROVED_DIRECT,APPROVED_INDIRECT,CREDITS_INPROC_DIRECT,CURR_INPROC_INDIRECT,PERF_PERIOD,REQ_COMP_DATE,PERF_MILESTONE,TYPE_PENALTY,PERF_GUARANTEE,PENALTY_RATE,STARTING_PENALTY,PENALTY_EXCEPTION,CORP_GUARANTEE,BANK,RISK,REMARKS,OBLIGATION_REMARKS,MILESTONE_REMARKS,NONSTANDARD_REMARKS,TRANSACTION_DATE,STATUS,AUTH_USER,PMLNAME,EXLD_PROJ,COMPLDATE,AUTHUSER_LNAME)values(@RECID,(Select COID from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select SITEID from ESBAOffsets..Offsets_Master where RECID = @RECID),@LOB,(Select COUNTRY from ESBAOffsets..Offsets_Master where RECID =@RECID),@PRODUCT,@ITEM_DESC,@AWARD_DATE,@CONTRACT_VALUE,@PROG_CONT_STATUS,(Select CONTRACT_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select FUNDING_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),@CONTRACT_NUMBER,@WA_OD,(Select PM from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select AGREEMENT_NUMBER from ESBAOffsets..Offsets_Master where RECID= @RECID),@CURR_OFFSET_OBL,@DIRECT_OBL,@INDIRECT_OBL,@APPROVED_DIRECT,@APPROVED_INDIRECT,@CREDITS_INPROC_DIRECT,@CURR_INPROC_INDIRECT,(Select PERF_PERIOD from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select REQ_COMP_DATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_MILESTONE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select TYPE_PENALTY from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PENALTY_RATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select STARTING_PENALTY from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select PENALTY_EXCEPTION from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select CORP_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select BANK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select RISK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select REMARKS from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select OBLIGATION_REMARKS from ESBAOffsets..Offsets_Master whereRECID = @RECID),@MILESTONE_REMARKS,@NONSTANDARD_REMARKS,@TRANSACTION_DATE,(Select STATUS from ESBAOffsets..Offsets_Master where RECID = @RECID),@AUTH_USER,(Select PMLNAME from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select EXLD_PROJ from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select COMPLDATE from ESBAOffsets..Offsets_Master where RECID =@RECID),@AUTHUSER_LNAME)select@@identity idgogrant execute on InsertOffsetHistory to publicgo
View 1 Replies
View Related
Sep 29, 2005
Hi to allI wish to be able to have a standard select statement which hasadditional fields added to it at run-time based on suppliedparameter(s).iedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'selectp_full_nameif @theTest1='TRUE'BEGINother field1,ENDif @theTest2='TRUE'BEGINother field2ENDfrom dbo.tbl_GIS_personwhere record_id < 20I do not wish to use an IF statement to test the parameter for acondition and then repeat the entire select statement particularly asit is a UNIONed query for three different statementiedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'if @theTest1='TRUE' AND @theTest2='TRUE'BEGINselectp_full_name,other field1,other field2from dbo.tbl_GIS_personwhere record_id < 20ENDif @theTest1='TRUE' AND @theTest2='FALSE'BEGINselectp_full_name,other field1from dbo.tbl_GIS_personwhere record_id < 20END......if @theTest<>'TRUE'BEGINselectp_full_namefrom dbo.tbl_GIS_personwhere record_id < 20ENDMake sense? So the select is standard in the most part but with smallvariations depending on the user's choice. I want to avoid risk ofbreakage by having only one spot that the FROM, JOIN and WHEREstatements need to be defined.The query will end up being used in an XML template query.Any help would be much appreciatedRegardsGIS Analyst
View 2 Replies
View Related
May 1, 2007
Is there a way to retreive the SQL Statement with the values from the parameters merged together? I know how to retreive the SQL Select Statement and the parameters separately but I need to retreive the final SQL.
For example:
SELECT name FROM employee WHERE id = @id
I would like to retreive from SQLDataSource
SELECT name FROM employee WHERE id = 1
Thank you
View 4 Replies
View Related
Mar 9, 2004
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
Thanks in advance.
View 1 Replies
View Related
Apr 14, 2004
I have a report in SQL that passes parameters at runtime entered by the user for two date ranges (beginning and ending). I'm trying to write a formula that will print a specific field *only if* the specified date range entered by the user is BETWEEN a specific value (like 200401). This is kind of reverse of a normal WHERE, BETWEEN clause.
I tried a standard BETWEEN predicate in my WHERE clause like:
IF '200401' BETWEEN ?BegPer and ?EndPer then salesanal.ptdbud01 else 0
But, it's returning an error that my Then statement is missing. I can't use a normal statement like 'IF ?BegPer >= '200401' and ?EndPer <= '200401', then.....' because users could enter a RANGE of periods, so it would be difficult to code all of the possible combinations this way. I'm actually doing this in Crystal, but if someone can give me a standard MSSQL example, I can translate that over to Crystal.
Thanks in advance,
Michelle
View 4 Replies
View Related
Apr 6, 2007
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.
Table 1
Org
aaa:aaa:aa
aaa:aaa:ab
aaa:aab:aa
Table 2
delim
Seg1Start
Seg1Len
Seg2Start
Seg2Len
Seg3Start
Seg3Len
:
1
3
5
3
9
2
My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.
Any ideas? Can this be done in SSIS?
I'd really appreciate any insight that anyone might have.
Regards,
Bill
View 23 Replies
View Related
Jul 23, 2005
I have an sql query that has specific criteria (like state='PA' orstate = 'NJ'...) and would like to be able to have the user specifythe criteria dynamically either through the web or from MSAccess oranother tool.The query also does a GROUP BY the state and other variables that arepart of the criteria.I know how to get MSAccess and asp pages to do the sorting andselecting against an SQL tbl or view, but when access queries the sameinfo as the original sql view, the process takes much longer than whenthe sql view does all of the sorting, selecting and grouping..The table we are currently using is 5 million records and will begrowing to 250 million records shortly, so speed is of the essence.The sql views and MSAccess are both running from the same server sothere is no issue at this point of a network impacting the MSAccessquery.Any suggestions...
View 6 Replies
View Related
Jul 23, 2005
In which system table the information about the optional parameters passed to stored procedure are stored.I know about the tbl_columns and all that stuff. From where can i can come to know the parameter is mandatory or optional.--Message posted via http://www.sqlmonster.com
View 1 Replies
View Related
Jan 8, 2007
Hi,
I am having the "classical problem" of the forums; A local date changed to the american format (normally in the development environment) which I call "Switching months with days"... well it switches both again if you press "view report" again :)The problem I'm having is that when I Navigate from one report to other, the dates get switched... Everything's been set in the locale uk date format (dd/mm/aaaa), in the operating system, in the database and in the reports... and the reports are working properly through the web interface.. the only thing that is not working properly is the Navigation which switches the date month with the day...Changing all the Reporting Services server, database server to the american format date is not an acceptable solution. Thanks for any guidance on this, as I'm pretty lost...Jose
View 4 Replies
View Related
Mar 27, 2014
In Profiler a StmtCompleted Event Class has identified a query to be:
SELECT TOP 1 * FROM [WINSVR2008R2].[001].DBO.[OECTLFIL_SQL] WHERE ( ( OE_CTL_KEY_1 = @P1 ) ) order by OE_CTL_KEY_1 asc
Is there any way to determine the value of @P1? If so which Event class and Column should I examine?
View 5 Replies
View Related
Apr 13, 2007
Hi, all experts here,
Thank you very much for your kind attention.
I am having a question about how can I put a chart and a table in a same page of my report? And let the same parameters passed between them? Is it possible in SQL server 2005 Reporting Services? Please would any experts here shed me any light on it?
Thank you very much in advance and I am looking forward to hearing from you.
With best regards,
Yours sincerely,
View 3 Replies
View Related
Nov 21, 2007
Hi,I'm using c# with a tableadapter to call stored procedures. I'm running into a problem where if I have over a certain byte size or number of parameters being passed into my stored proc I get an exception that reads: "Cannot evaluate expression because a thread is stopped at a point where garbage collection is impossible, possibly because the code is optimized." If I remove one parameter, the problem goes away. Has anyone run into this before? Thanks,Mark
View 3 Replies
View Related
Sep 29, 2015
So I have a report that uses an MDX query to fetch the main data for the tablix. Then I have a custom row added which pulls data in via a Lookup function and references a different dataset. The report has 3 parameters. Each dataset uses those 3 parameters in its underlying query. However, the dataset referenced in the lookup function doesnt seem to be updating when change the parameters and re-run the report.
View 2 Replies
View Related
Jun 23, 2015
Using the following:
SQL Server: SQL Server 2012
Visual Studio 2012
I have created an SSIS package where I have added an Execute SQL Task to run an existing stored procedure in my SQL database.
General Tab:
Result Set: None
Connection Type: OLE DB
SourceType: Direct Input
IsQueryStoredProcedure: False (this is greyed out and cannot be changed)
Bypass Prepare: True
SQL Statement: EXEC FL_CUSTOM_sp_ml_location_load ?, ?;
Parameter Mapping:
Variable Name Direction Data Type Prmtr Name Prmtr Size
User: system_cd Input NVARCHAR 0 10
User: location_type_cd Input NVARCHAR 1 10
Variables:
location_type_cd - Data type - string; Value - Store (this is static)
system_cd - Data type - string - ??????
The system code changes based on the system field for each record in the load table
Sample Data:
SysStr # Str_Nm
3 7421Store1
3 7454Store2
1815061Store3
1815063Store4
1615064Store5
1615065Store6
1615066Store7
7725155Store8
STORED PROCEDURE: The stored procedure takes data from a load table and inserts it into another table:
Stored procedure variables:
ALTER PROCEDURE [dbo].[sp_ml_location_load]
(@system_cd nvarchar(10), @location_type_cd nvarchar(10))
AS
BEGIN .....................
This is an example of what I want to accomplish: I need to be able to group all system 3 records, then pass 3 as the parameter for system_cd, run the stored procedure for those records, then group all system 18 records, then pass 18 as the parameter for system_cd, run the stored procedure for those records and keep doing this for each different system in the table until all records are processed.
I am not sure how or if it can be done to pass the system parameter to the stored procedure based on the system # in the sys field of the data.
View 6 Replies
View Related
Apr 15, 2008
I have an issue with using multiple parameters in SQL Reporting services where data is passed in from a stored procedure
When running the report in design mode - I can type in a parameter sting and it runs fine
In the report preview screen I can select single parameters by ticking the drop down list and again it runs fine
as soon as I tick more than one I get an error
An error occurred during local report processing
Query execution failed for data set €˜data'
Must declare the scalar variable '@parameter'
Some info...
The dataset 'workshop' is using a sproc to return the data string?
I get multiple values back fine in the sproc using this piece of code
(select [str] from iter_charlist_to_table( @Parameter, DEFAULT) ))
I have report parameters set to Multi-Value
Looking through the online books it says...
You can define a multivalued parameter for any report parameter that you create.
However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services.
The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure.
The query must use an IN clause to specify the parameter.
Am I trying to do the impossible ?
View 1 Replies
View Related
Jul 15, 2014
I am writing a stored procedure that takes in a customer number, a current (most recent) sales order quote, a prior (to most current) sales order quote, a current item 1, and a prior item 1, all of these parameters are required.Then I have current item 2, prior item 2, current item 3, prior item 3, which are optional.
I added an IF to check for the value of current item 2, prior item 2, current item 3, prior item 3, if there are values, then variable tables are created and filled with data, then are retrieved. As it is, my stored procedure returns 3 sets of data when current item 1, prior item 1, current item 2, prior item 2, current item 3, prior item 3 are passed to it, and only one if 2, and 3 are omitted.I would like to learn how can I return this as a one data set, either using a full outer join, or a union all?I am including a copy of my stored procedure as it is.
View 6 Replies
View Related
May 14, 2014
I'd like to be able to offer the option of selecting a project by the ProjectID number, and if a projectID is not supplied then the default result set would be select * from tbl_Projects.
ALTER PROCEDURE [USP_SelectProject]
-- Add the parameters for the stored procedure here
@ProjectNumber as int
AS
BEGIN
[code]....
View 9 Replies
View Related
Aug 3, 2007
Hi all - this one has me stumped... PLEASE HELP!!!
I have a back/forward navigation link that passes a URL.startrow number (lets call it n) - based on n - I only want to select the record that is the n'th record based on a sort order (gall_order) - (SQL SERVER).
<cfquery name="gallHomePic1st" datasource="id" maxrows="1">
SELECT id
FROM gall_home
ORDER BY gall_order asc
</cfquery>
For e.g. - I want the 7th (14th - 21st etc) record based on gall_order asc.
Thanks guys - this has me stumped!
View 4 Replies
View Related
Oct 17, 2007
Greetings, all!
I had a question about how SRS passes multiple values to a query.
For example:
Say I had a "select box" (Sorry, can't think of the proper term right now) with the following values:
F1
F2
F3
F4
The user then selects F1 and F4.
When SRS passes the selected values to the query or procedure, how are they passed? As a delimited value?
Examples of what I mean:
@Parameter = 'F1', 'F4'
@Parameter = F1 [Some unknown delimiting symbol] F4
@Parameter = 'F1,F4'
Does anyone know how this is done? Or is it done in some other odd way?
Thanks!
View 12 Replies
View Related
Dec 20, 2005
When a SQL statement is executed against a SQL Server database is therea server-side setting which dictates the size of the fetch buffer? Weare having some blocking issues on a new server install which do notoccur on the old server until a much larger volume of data is selected.Any help appreciated.
View 2 Replies
View Related
May 2, 2008
i want to select the values of column passed from the user like
connectionsizein or connectionsizemm
how can i do
i am using sql server 2005
View 2 Replies
View Related
Sep 3, 2007
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
View 3 Replies
View Related
Apr 29, 2008
Hello all,
I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType
from Product
order by ProductType
Any suggestion? thx
View 12 Replies
View Related
Feb 27, 2008
There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
View 1 Replies
View Related
Aug 29, 2006
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies
View Related
Jan 9, 2015
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
View 4 Replies
View Related
Jul 20, 2005
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies
View Related
Oct 29, 2007
Hi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
View 3 Replies
View Related
Jul 4, 2006
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
View 7 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
 UPDATE TABLE1
  SET TABLE1.FIELD2 = 1
 ELSE
  UPDATE TABLE2
  SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Aug 24, 2005
I have a sql that I want to execute with LIKE and parameters:I tried several options outlined that I found at http://aspnet101.com/aspnet101/tutorials.aspx?id=10%20but they all seem to return 0 records. When I try and execute my statement in Enterprise manager, it works fine.Code Snippet:...Dim sql as stringsql = "SELECT * FROM tblName WHERE First LIKE '%' + @fname + '%' AND Last LIKE '%' + @lname + '%'"Dim param(1) as sqlParametersqlParams(0) = New SqlParameter("@fname", SqlDbType.VarChar, 50)sqlParams(0).Value = Trim(fname.text)sqlParams(1) = New SqlParameter("@lname", SqlDbType.VarChar, 50)sqlParams(1).Value = Trim(lname.text)...Can anyone tell me if there is anything wrong with my code above?
View 8 Replies
View Related
May 27, 2008
Hi,
I have an issue with an OLE DB command and parameters. The statement I want to run starts with a WITH statement - when I take out the parameter it runs fine. When I take out the WITH statement and leave the parameter in it runs fine. When I run the statement in SSMS it runs fine.
With both the WITH statement and the parameter in it gives the error 'Syntax error, permission violation, or other nonspecific error'.
Has anyone seen this before?
View 2 Replies
View Related
