Using Sp_droprolemember Inside A Transaction
Oct 1, 2007
I have a trigger which requires dropping a member from a role and includes user transactions. However you cannot call sp_droprolemember from within a user transaction. Looking at the code for the procedure gives me a line
quote:
exec %%Owner(Name = @membername).SetRoleMember(RoleID = @roluid, IsMember = 0)
I can find no documentation on SetRoleMember or %%owner and attempts to run this line as an exec statement fails with "syntax error near '%'"
Nor can I find any way of dropping a member from a role using T-SQL or DDL constructs.
How do I drop a member from a role using T-SQL code and avoiding sp_droprolemember? And where do I find information about the %%Owner construct?
View 5 Replies
ADVERTISEMENT
Jul 20, 2005
Hi,Is there any way that calls to sp_addrolemember and sp_droprolemembercan be enabled for non database owners and non sysadmin members?This would be very helpful for an application I'm in the middle ofdeveloping, in which users have the right to view some data and editsome data in a set of tables. The data is pulled up in a set of views(using SQL Server 7 with an Access 2000 front-end). Depending on aninitial selection that the user makes, s/he should be able to eitherread or edit the data.The solution I hoped to use would run a stored procedure, that amongstother things would add and/or remove the user to/from a data_read anddata_edit role, depending on the initial selection s/he made.Any suggestions?Much thanks!Oren Bergman
View 3 Replies
View Related
Sep 7, 2006
Hi to all,Probably I'm just doing something stupid, but I would like you to tellme that (if it is so), and point the solution.There ist the thing:I' having a sp, where I call other sp inside.The only problem is, the name of this inside sp is builded variously,and executed over sp_executesql:create pprocedure major_sp@prm_outer_1 varchar(1),@prm_outer_2 varchar(2)assome codingset @nvar_stmtStr = N'exec @int_exRetCode = test_sp_' + @prm_outer_1 +@prm_outer_2set @nvar_stmtStr = @nvar_stmtStr + ' @prm_1, @prm_2, @prm_3, @prm_4output'set @nvar_prmStr = N'@prm_1nvarchar(128), ' +N'@prm_2nvarchar(128), ' +N'@prm_3nvarchar(4000), ' +N'@int_exRetCodeint output, ' +N'@prm_4varchar(64) output'exec sp_executesql @nvar_stmtStr,@nvar_prmStr,@prm_1,@prm_2,@prm_3,@int_exRetCode = @int_exRetCode output,@prm_4 = @prm_4 outputNow the issue is, I've transactions inside test_sp_11 lets say wherethe 11 is @prm_outer_1 + @prm_outer_2.These procedures are existing inside database, but are called dynamiclydepending of the parameters.The problem is, when I call the specified sp directly, the rollbacktransaction is working without any problem.Inside this procedures test_sp_xx, is a call of another sp (lets sayinside_sp).There is a transaction included.When it is called over major_sp, then the rollback is not performedbecause of error:Server: Msg 6401, Level 16, State 1, Procedure inside_sp, Line 54Cannot roll back transactio_bubu. No transaction or savepoint of thatname was found.The funniest way is, if there is no error inside, the commit is workingwithout any problem!The question is majory (because I'm almost sure, that this is anissue): is it possible, to have atransaction inside dynamicly called sp over sp_executesql?If ok to do that?Thank's in advanceMatik
View 1 Replies
View Related
May 6, 2008
Hi,
When i execute the following set of statements only 8 is getting inserted into table instead 6 and 8.
Create Table BPTest(id int)
Declare @Id Int
Set @Id = 0
While (@Id < 10)
Begin
begin tran
Insert into BPTest values (@id)
if(@Id > 5)
begin
if(@Id % 2 = 0)
begin
print 'true' print @Id
commit tran
end
else
begin
print 'false' print @Id
rollback tran
end
end
Set @Id = @Id + 1
End
Select * from BPTest
drop table BPTest
Please let me know the reason for this.
Thanks in advance
Regards,
K. Manivannan
View 1 Replies
View Related
Aug 22, 2005
I'm using transactions with my SqlConnection ( sqlConnection.BeginTransaction() ).
I do an Insert into my User table, and then subsequently use the
generated identity ( via @@identity ) to make an insert into another
table. The foreign key relationship is dependant on the generated
identity. For some reason with transactions, I can't retrieve the
insert identity (it always returns as 1). However, I need the
inserts to be under a transaction so that one cannot succeed while the
other fails. Does anyone know a way around this problem?
So heres a simplefied explanation of what I'm trying to do:
Begin Transaction
Insert into User Table
Retrieve Inserted Identity (userID) via @@Identity
Insert into UserContact table, using userID as the foreign key.
Commit Transaction.
Because of the transaction, userID is 1, therefore an insert cannot be
made into the UserContact table because of the foreign key constraint.
I need this to be a transaction in case one or the other fails. Any ideas??
View 5 Replies
View Related
Feb 26, 2006
Is it normal practice to check for @@ERROR after a SELECT statement that retrieves data from a table OR we should only check for @@ERROR after a DELETE/INSERT/UPDATE type of statement? The SQL statement is inside a transaction.
View 1 Replies
View Related
May 9, 2007
Please find my second post in this thread.
Can anyone help me in sorting out the problem and let me know what might be the reason.
Thanks & Regards
Pradeep M V
View 19 Replies
View Related
Oct 9, 2007
Hi,
Can we include a Send Mail Task inside a transaction?
We intend to callback a sent email in case there is an error in the subsequent task, if it is possible.
Thanks and Regards,
B@ns.
View 4 Replies
View Related
Oct 30, 2006
We are designing an ETL solution for a BI project using SSIS.
We need to load a dimension table from a source DB into the DW; inside the DW there are two tables for each source dimension table: a current dimension table and a storical dimension table.
The source table includes technical columns that indicate if each record was processed correctly by ETL procedures.
Each row in the source table can be a new record, or an exisisting one. If it's a new record, a corresponding new record should be inserted into the current dimension table of the DW; if it's an exisisting one, a new record should be inserted in the storical dimension table and the existing record in the current dimension table should be updated.
Furthermore for each record we need to update the source table with an error code. If the record was processed with succes the code is zero, otherwise it contains an error code.
I try to use a single data flow task, using the 'ole db command trasformation' task for managing update and 'ole db destination' task for managing insert.
The problem is that some insert and update should be executed inside a single transaction, for each record; for example if the source contains a new record I should insert the record in the current dimension table and update the source record with error code zero if every think goes fine.
There is some way to group task in the data flow pane in a single transaction ?
There is a better way to do that ?
Cosimo
View 12 Replies
View Related
Apr 11, 2006
I have some VB.NET code that starts a transaction and after that executes one by one a lot of queries. Somehow, when I take out the transaction part, my queries are getting executed in around 10 min. With the transaction in place it takes me more than 30 min on one query and then I get timeout.
I have checked sp_lock myprocessid and I've noticed there are a lot of exclusive locks on different objects. Using sp_who I could not see any deadlocks.
I even tried to set the isolation level to Read UNCOMMITED and still have the same problem.
As I said, once I execute my queries without being in a transaction everything works great.
Can you help me to find out the problem?
Thanks,
Laura
View 11 Replies
View Related
Nov 23, 2005
Hello, everyone:
I have a local transaction,
BEGIN TRAN
INSERT Z_Test SELECT STATE_CODE FROM View_STATE_CODE
COMMIT
View_STATE_CODE points to remote SQL server named PROD. There is error when I run this query:
Server: Msg 8501, Level 16, State 1, Line 12
MSDTC on server 'PROD' is unavailable.
Server: Msg 7391, Level 16, State 1, Line 12
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d01c].
It looks like remote server is not available inside the local transaction. How to handle that?
Thanks
ZYT
View 5 Replies
View Related
Jan 15, 2007
hi:
I try to create full text for new created tables.
Since all new created tables will have same columns with different table name.
After I run the stored procedure to create table, after i got the new table name, I would like to create full-text on that table in the DDL triger.
But I got error like this:
CREATE FULLTEXT CATALOG statement cannot be used inside a user transaction.
Any one has idea how to deal with it?
Thanks
View 3 Replies
View Related
Nov 29, 2005
I use the context connection for the "normal" work in the CLR procedure.
View 7 Replies
View Related
Jan 15, 2007
I cannot manage to fetch the new timestamp value inside a TSQL Transaction. I have tried to Select "@LastChanged" before committing the transaction and after committing the transaction. A TimestampCheck variable is used to get the timestamp value of the Custom Business Object. It is checked against the row updating to see if they match. If they do, the Update begins as a Transaction. I send @LastChanged (timestamp) and an InputOutput param, But I also have the same problem sending in a dedicated timestamp param ("@NewLastChanged"): 1 select @TimestampCheck = LastChanged from ADD_Address where AddressId=@AddressId
2
3 if @TimestampCheck is null
4 begin
5 RAISERROR ('AddressId does not exist in ADD_Address: E002', 16, 1) -- AddressId does not exist.
6 return -1
7 end
8 else if @TimestampCheck <> @LastChanged
9 begin
10 RAISERROR ('Timestamps do not match up, the record has been changed: E003', 16, 1)
11 return -1
12 end
13
14
15 Begin Tran Address
16
17 Update ADD_Address
18 set StreetNumber= @StreetNumber, AddressLine1=@AddressLine1, StreetTypeId=@StreetTypeId, AddressLine2=@AddressLine2, AddressLine3=@AddressLine3, CityId=@CityId, StateProvidenceId=@StateProvidenceId, ZipCode=@ZipCode, CreateId=@CreateId, CreateDate=@CreateDate
19 where AddressId= @AddressId
20
21 select @error_code = @@ERROR, @AddressId= scope_identity()
22
23 if @error_code = 0
24 begin
25 commit tran Address
26
27 select @LastChanged = LastChanged
28 from ADD_Address
29 where AddressId = @AddressId
30
31 if @LastChanged is null
32 begin
33 RAISERROR ('LastChanged has returned null in ADD_Address: E004', 16, 1)
34 return -1
35 end
36 if @LastChanged = @TimestampCheck
37 begin
38 RAISERROR ('LastChanged original value has not changed in ADD_Address: E005', 16, 1)
39 return -1
40 end
41 return 0I do not have this problem if I do not use a TSQL Transaction. Is there a way to capture the new timestamp inside a Transaction, or have I missed something?Thank you,jspurlin
View 1 Replies
View Related
Sep 18, 2015
I am getting an error about "Cannot perform a shrinkfile operation inside a user transaction", but I don't have a shrinkfile command in my procedure. Does SQL hang on to that command if it was received earlier in a different procedure?
View 5 Replies
View Related
Jun 1, 2006
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1
SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
KS
View 4 Replies
View Related
Sep 12, 2007
For inserting current date and time into the database, is it more efficient and performant and faster to do getDate() inside SQL Server and insert the value
OR
to do System.DateTime.Now in the application and then insert it in the table?
I figure even small differences would be magnified if there is moderate traffic, so every little bit helps.
Thanks.
View 9 Replies
View Related
Nov 16, 2007
I'm trying to execute a stored procedure within the case clause of select statement.
The stored procedure returns a table, and is pretty big and complex, and I don't particularly want to copy the whole thing over to work here. I'm looking for something more elegant.
@val1 and @val2 are passed in
CREATE TABLE #TEMP(
tempid INT IDENTITY (1,1) NOT NULL,
myint INT NOT NULL,
mybool BIT NOT NULL
)
INSERT INTO #TEMP (myint, mybool)
SELECT my_int_from_tbl,
CASE WHEN @val1 IN (SELECT val1 FROM (EXEC dbo.my_stored_procedure my_int_from_tbl, my_param)) THEN 1 ELSE 0
FROM dbo.tbl
WHERE tbl.val2 = @val2
SELECT COUNT(*) FROM #TEMP WHERE mybool = 1
If I have to, I can do a while loop and populate another temp table for every "my_int_from_tbl," but I don't really know the syntax for that.
Any suggestions?
View 8 Replies
View Related
May 26, 2008
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
View 4 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Jun 10, 2015
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies
View Related
Jul 11, 2007
I want to list out the pending transaction for transaction replication by publication.
Help needed.
View 1 Replies
View Related
Nov 14, 2006
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
View 1 Replies
View Related
Jul 27, 2015
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
View 6 Replies
View Related
Jun 1, 2007
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
View 3 Replies
View Related
Oct 10, 2005
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies
View Related
Jun 1, 2006
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
View 12 Replies
View Related
Nov 28, 2004
I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
View 3 Replies
View Related
Oct 11, 2000
I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
View 1 Replies
View Related
