Using The Indentity Column
Feb 22, 2008
As an example I have three tables
Table1
ChildName (nvarchar)30
ChildID (INT) Set as €˜IDENTITY€™
Table2
ParentName(nvarchar)30
ParentID (INT) Set as €˜IDENTITY€™
Table3
ChildID (INT)
ParentID (INT)
I have the following code.
Dim dbcnn As SqlClient.SqlConnection = New SqlClient.SqlConnection(dbsettings.getDatabaseString)
Dim dbcmd As SqlClient.SqlCommand
dbcmd_AddDriverRoute = New SqlClient.SqlCommand("usp_Insert", dbcnn)
dbcmd.CommandType = CommandType.StoredProcedure
dbcmd.Parameters.AddWithValue("@ChildID ", cmb_child.SelectedItem)
dbcmd.Parameters.AddWithValue("@ParentID ", "@@IDENTITY")
dbcnn.Open()
dbcmd.ExecuteScalar()
dbcnn.Close()
basically what I want to do is when a child is added I want to be able to insert ParentID (INT) Set as €˜IDENTITY€™ value into table3 ParentID (INT) .
I have my sql statement in place I am not sure how to take an identity value stored in the db.
View 6 Replies
ADVERTISEMENT
Feb 24, 2000
when I use the code
SET IDENTITY_INSERT tss_Cable ON
go
DECLARE @@nextidentval int
SELECT @@nextidentval = MIN(IDENTITYCOL) + IDENT_INCR(tss_Cable)
FROM tss_Cable t1
WHERE IDENTITYCOL BETWEEN IDENT_SEED(tss_Cable) AND 2147483646
AND NOT EXISTS (SELECT * FROM tss_Cable t2
WHERE t2.IDENTITYCOL = t1.IDENTITYCOL IDENT_INCR(tss_Cable))
go
SET IDENTITY_INSERT tss_Cable OFF
I get the following error.
error line 2 Incorrect syntax near IDENT_INCR.
error line 6 incorrent syntax near IDENT_INCR.
I would like to reset the identity without droping the table. I'm using
sql 6.5. I looked at Mark Lessard 12/17/99 respose on this issue and changed
the code to match his version but the same error occured.
View 1 Replies
View Related
Mar 24, 2008
i have table with one column
CREATE TABLE [dbo].[tblTest](
[ID] [int] IDENTITY(1,1) NOT NULL
how do i insert values.(i,e identity)
View 14 Replies
View Related
Dec 6, 2007
I am trying to remove the Indentity property from a column so I can do some clean up. Then will need to add it back. Adding Indentity property back is not a problem, but cant figure out how to remove it in the first place.
Any help would be greatly apprecaited.
Thanks
Dave
View 4 Replies
View Related
Nov 16, 2004
Hello, everyone:
I have a table with an indentity column as first column. At beginning it is continue such as 0-50. I delete last 20 columns by hand. The 0-31 is left. When the new data is inserted, I hope the new indentity column begin from 32. How to do that? Now the indentity column begin from 51 as the new data is inserted.
Thanks a lot
ZYT
View 9 Replies
View Related
Feb 20, 2008
Dear Friends,
I need a SQL Query to add a identity coloumn for anExisting table. (ie) when i try to alter the table i want to add an identity coloumn.
Thanks in advance.
View 8 Replies
View Related
Feb 20, 2006
Arkadiy writes "Why @@indentity returns NULL after inserting new row?"
View 6 Replies
View Related
Jun 15, 2000
Hi folks!
I need to populate a table having an identity field with data (basically I want to make a copy of a table with identity column on another server). When I use BCP to insert data then the values in the identity field is not the same as in the data file but gets incremented from the original.
eg. if the records in the flat file are-
1, 'test1'
2, 'test2'
Now if i insert this into the table (say the last identity value was 100) then rows get inserted as-
101, 'test1'
102, 'test2'
Is there any way by which I can retain the values of the identity column to be same as in the file?
Thanks!
View 1 Replies
View Related
Apr 7, 2003
How do reset identity seed on table, for example I have table that has gap in the identity such as (1,2,3,5,6, etc..) and I want reset the entire table.
Thank You,
John
View 2 Replies
View Related
Feb 27, 2006
What is the best way to do Indentity(1,1) on fields which is varchar(8)?
View 1 Replies
View Related
Jul 20, 2005
I'm doing a data transfer from Access to SQL Server, I wish to keep theidentity column (autonumber) values as all the data is already related. Itried the first table append query including the identity column, it worked.Was this fluke? Will it always work? I was under the impression that I wouldhave to issue a "set identity_insert on" before doing this. The SQL databasewill have absolutely no data before the transfer routines are run.
View 15 Replies
View Related
Apr 25, 2008
IDE: Visual Studio 2008
DB: SSCE 3.5
OS: WinXP SP2 (CHS)
.....
Code Snippet
String str_sql_insert = "INSERT INTO Person (Name, ShortName, Description, Tag) VALUES ('" + this.TextBox.Text.Trim() + "', '" + this.ShortNameTextBox.Text.Trim() + "', '" + this.DescriptionTextBox.Text.Trim() + "','" + this.TagComboBox.SelectedValue.ToString().Trim() + "); SELECT @@INDENTITY";
SqlCeConnection tempConn = dbman.getConn();
SqlCeCommand tempComm = new SqlCeCommand(str_sql_insert, tempConn);
tempConn.Open();
Object ob = tempComm.ExecuteScalar();
.....
When I run the application there is a error report on the last line of the code above:
[ Token line number = 1,Token line offset = 127,Token in error = SELECT ]
When I copy the SQL string into the QueryBuilder in the VS2008 it is works and returned a correct value.
I want to know is there something wrong with the sql string or the ExecuteScalar() cant execute 2 steps command?
thanks
View 6 Replies
View Related
Nov 15, 1999
I would like to reset the Identity column in a table so it starts at the begining. I am planning to clean out this table.
Thanks
Gary
View 1 Replies
View Related
Jul 12, 2005
I'm trying something new, and have hit a snag.
basically, I'm attempting to use two INSERT commands in a single SP. I want to use the PK from the new entry and apply that to the second.
here's the code;
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
CREATE PROCEDURE spInsertNewUser
@fn varchar(50),
@ln varchar(50),
@add varchar(50),
@add2 varchar(50),
@ct varchar(50),
@cty varchar(50),
@st varchar(4),
@pc varchar(50),
@ph varchar(50),
@cp varchar(50),
@fx varchar(50),
@em varchar(50),
@pw varchar(50),
@uid varchar(50),
@rc bit,
--@indentity int OUTPUT,
@cid int
AS
SET NOCOUNT ON
INSERT INTO tblUserInfo
(
firstName,
lastName,
address,
address2,
city,
county,
state,
postalCode,
phone,
cellPhone,
fax,
email,
pword,
userUID,
regConfirmed
)
VALUES (
@fn,
@ln,
@add,
@add2,
@ct,
@cty,
@st,
@pc,
@ph,
@cp,
@fx,
@em,
@pw,
@uid,
@rc
)
SELECT @@IDENTITY FROM tblUserInfo
--SET @indentity = @@IDENTITY
INSERT INTO tblUserToCountySubscribedLKP (
UserID, CountyID
) VALUES(
@@indentity, @cid
)
:::::::::::::::::::::::::::::::::::::::::::::::::: :::::::::::::::
I'm sure the problem is largely due to the fact that I am close to completely clueless on such things, but a bit of timely advice from the sage sql wizards here would be most welcome and greatly appreciated.
View 5 Replies
View Related
Jan 4, 2005
Hello folks,
I am using the following INSERT statement to add a new record in my table. I want to be able to get the Autonumber UserID field of the newly created record but I am getting the following error: "Characters found after end of SQL statement"
Code:
INSERT
INTO tblUser
(LoginName, UserPassword, EmailAddress, City)
Values
(@User, @UsrPassword, @EmailAddress, @City);
SELECT @@IDENTITY As 'Identity'
What is wrong in my statement?
How do I retrieve the Autonumber field of the newly created record?
How do I handle if the LoginName and/or EmailAddress already exists?
I want to be able save this INSERT statement as an Access Query and call it from my C# code.
I would appreciate any help.
Thanks
Mike
View 1 Replies
View Related
Mar 24, 2006
Hi Guys,
I'm using SQL server 2000.
How do I alter column/field from type int (with Identity = Yes Not For Replication) to just normail int field. No more identity. I want it to be done using SQL script( sql query analyzer).
Please help me on this, thx
Regards,
Shaffiq
View 4 Replies
View Related
Sep 11, 2006
I imported a table using DTS.
I run SQL statements in my original server database. It works well.
But when I run the same instructions within a stored procedure in my new workstation where I improrted the table I get this error:
Server: Msg 515, Level 16, State 2, Procedure InsertFichierPrix, Line 11
Cannot insert the value NULL into column 'Id', table 'myDBLive.dbo.FichierPrix'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Here is the SQL statements that I run on the original Database:
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,....) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur', ....)
And here is my SP that I run on the new imported database:
CREATE PROCEDURE InsertFichierPrix @NomFichier varchar(50), @NomFr varchar(50),@NomAn varchar(50)
AS
declare @NomFourFr varchar(50)
declare @NomFourAn varchar(50)
SET @NomFourFr='liste fournisseur ' + @NomFr
set @NomFourAn='liste fournisseur ' + @NomAn
insert into fichierprix(nomfichier, version, descriptionfr, typeclient,...) values(@NomFichier,'Actuelle', @NomFourFr, 'MembreAcheteur'...)
GO
And here is the execution of my Stored proc on the destination database:
execute insertfichierprix @NomFichier='myfilename2', @NomFr='fournifr1',@NomAn='Fourniang1'
Thank you for helping me.
View 2 Replies
View Related
Jul 20, 2005
Hi,When i eg. manually ad entries to a table and, cancels the insert Ms SQLincrement the counter on the ID anyway. Is there a way to avoid thisbehavior?RegardsAnders
View 1 Replies
View Related
Jul 20, 2005
Hi AllI have a table in SQL Server with ID having indentity inrement by one.Table has not any trigger. Frequently ID in the table jumps.Any help !!!Thanks
View 2 Replies
View Related
Aug 1, 2007
Hi There
Can anyone tell me how an identity column decides what number to give which row.
I always thought that it was in order of the clustered index.
But i have found the following:
If you have Table A with a clustered index(not unique) say on the first 3 columns.
If the table is empty and you add an identity column, then afterward load it with data the value of the identity column seems to match the clustered index.
But if the table has no identity column and it is filled with data, and then you add an identity column the number for the identity column seems to be all over the place.
So basically how does a newly added identity column know what number to give each row, what if the clustered index is not unique? Is it random ?
Thanx
View 4 Replies
View Related
Jul 28, 2015
I have a excel file which has a column called "Code" and their values are A,B,C,D,E,F,G,H. I want to create a new column called "status" based on the values of "Code".
Code:
A
B
C
D
E
F
G
H
If A,C,E,G then "status" = "Active" else if B,D,F,H then "Status" = "Inactive". I like to do it using "Derived Column".
View 4 Replies
View Related
Aug 3, 2015
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies
View Related
Oct 16, 2006
Hi all,
The requirement is to have a table say 'child_table', with an Identity column to refer another column from a table say 'Parent_table'..
i cannot implement this constraint, it throws the error when i execute the below Alter query,
ALTER TABLE child_table ADD CONSTRAINT fk_1_ct FOREIGN KEY (child_id)
REFERENCES parent_table (parent_id) ON DELETE CASCADE
the error thrown is :
Failed to execute alter table query: 'ALTER TABLE child_table ADD CONSTRAINT
fk_1_ct FOREIGN KEY (child_id) REFERENCES parent_table (parent_id) ON DELETE
CASCADE '. Message: java.sql.SQLException: Cascading foreign key 'fk_1_ct' cannot be
created where the referencing column 'child_table.child_id' is an identity column.
any workarounds for this ?
View 3 Replies
View Related
Sep 7, 2007
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
View 18 Replies
View Related
Jul 11, 2007
When you use "Alter Table add Column", it adds the column to the end of the list of fields.
How do you insert the new column to position number 2 for instance given that you may have more than 2 columns?
Create table T1 ( a varchar(20), b varchar(20), c varchar(20))
Alter table add column x varchar(20)
so that the resulting table is
T1 a varchar(20), x varchar(20), b varchar(20), c varchar(20)
Can this be done programmatically?
View 33 Replies
View Related
Mar 7, 2008
Hi I’m trying to alter a table and delete a column I get the following error. The object 'DF__Morningst__LastU__19EB91BA' is dependent on column 'LastUpdated'.
ALTER TABLE DROP COLUMN LastUpdated failed because one or more objects access this column. I tried deleting the concerned constraint. But the next time I get the same error with a different constraint name. I want to find out if I can dynamically check the constraint name and delete it and then drop the column. Can anyone help.IF EXISTS(SELECT 1FROM sysobjects,syscolumnsWHERE sysobjects.id = syscolumns.idAND sysobjects.name = TablenameAND syscolumns.name = column name)BEGIN EXECUTE ('ALTER TABLE tablename DROP CONSTRAINT DF__SecurityM__DsegL__08C105B8')EXECUTE ('ALTER TABLE tablenameDrop column columnname)ENDGO
View 1 Replies
View Related
Nov 12, 2012
I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
View 3 Replies
View Related
Feb 26, 2015
Is there a way to display a column alias as part of the result set column labels?
View 9 Replies
View Related
Mar 5, 2007
Hi,
I have dates in "mmddyy" format coming from the sources and they are older dates of mid 80s like 082580 for instance.
When I cast it this way (DT_DBTIMESTAMP) Source_Date , It says ok but throws a runtime error.
When I hardcode a date in same format, (DT_DBTIMESTAMP) "082580" , It becomes red (an indication of syntax error) . Please note that we use double quotes in expressions in Derived Column Transformation; So an anticipation that using double quotes over single ones would be the syntax problem would be wrong.
Any help in this will sincerely be appreciated.
Thanks
View 7 Replies
View Related
Jun 4, 2015
How to change column size dynamically depends on content of the column.
View 2 Replies
View Related
May 13, 2015
I am creating a report in SSRS which has the following criteria:
- Row 1 (parent) is 'Product'
- Row 2 (child) is  'Feed'
- Columns are date. Â I have 5 dates showing at any one time across the top. Â The date field is set up as a parameter so depending on the date the user selects, the report will show that date on the end column and then the 4 days prior to that in the other columns. Â Â
 - Data is the number of records.
I have a sub total on the Product and the report is collapsed on Product as default.
What i'm stuck on is trying to insert a column at the very end that will show the variance between the last two dates. Â So the difference between the date the user selected (@date parameter) and the day before that.Â
View 6 Replies
View Related
Nov 17, 2015
I have a Table Having Date,Opening,Addition,Sale values where opening value comes in the very first row other times it is zero.
In ssrs how can i have a report showing closing value = Opening+Addition-Sale  in current row (it is simple for 1st row ). this closing be the opening value in next row and same formula to be continued...
Date Opening AdditionTotalTank saleClosing Stock
01-11-15 14435 0 14435 8243 20627
02-11-15 0 15000 15000 9433
03-11-15 0 9000 9000 9436
04-11-15 0 12000 12000 8392
05-11-15 0 6000 6000 8157
06-11-15 0 12000 12000 8456
07-11-15 0 15000 15000 10903
08-11-15 0 6000 6000 8485
09-11-15 0 6000 6000 9413
10-11-15 0 21000 21000 6413
View 7 Replies
View Related
Jan 15, 2008
ALTER procedure [dbo].[MyPro](@StartRowIndex int,@MaximumRows int)
As
Begin
Declare @Sel Nvarchar(2000)set @Sel=N'Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between ' + convert(nvarchar(15),@StartRowIndex) + ' and ('+ convert(nvarchar(15),@StartRowIndex) + '+' + convert(nvarchar(15),@MaximumRows) + ')-1'
print @Sel
Exec Sp_executesql @Sel
End
--Execute Mypro 1,4 --->>Here I Executed
Error
Select *,Row_number() over(order by myId) as ROWNUM from MyFirstTable Where ROWNUM
Between 1 and (1+4)-1
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'ROWNUM
Procedure successfully created but giving error while Excuting'.
Please anybody give reply
Thanks
View 2 Replies
View Related
