Hi
I need to use a variable as column in SQL statement in Execute SQL task of integration services. I am setting Parameter Setting to map variable use it in the query like; select ? , col1name from tablename. But its not working.
Anybody having any idea; would be of great help.
Thanks,
Salman Shehbaz.
I cannot find the data type for parameter mapping from Execute SQL Task Editor to make this works.
1. Execute SQL Task 1 - select max(columnA) from tableA. ColumnA is varbinary(8); set result to variable which data type is Object.
2. Execute SQL Task 2 - update tableB set columnB = ?
What data type should I use to map the parameter? I tried different data types, none working except GUI but it returned wrong result.
Does SSIS variable support varbinary data type? I know there's a bug issue with bigint data type and there's a work-around. Is it same situation with varbinary?
Thanks,
-Ash
Hello,
I am having a hard time setting the executable path for an Execute Process Task in SSIS. I have a variable that is initialized at package statup which holds the path to an executable in Windows. When I set the property "Executable" Path in an expression, I get a warning that the path for the executable is not set. One workaround was to try and initialize the variable with a bogus path with the hopes that the "correct" value will be written on run-time. NO LUCK. I still get the error and I cannot run the package until I put a static path.
Does anyone have a clue as to what is going on??
Mike
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned). There is no problem to achieve that.
But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. "
I tried to change the type of variable around but with no luck.
Could anyone help with this issue? Thanks!
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
Hi,
I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example:
DECLARE @my_variable int
, <several_others>
SET @my_variable = ?
<do_some_stuff>
Of course, I also set up the parameter mapping.
However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements.
I have several reasons for wanting to do this:
- the script uses several variables, several times. Not all SQL variables are assigned via IS variables.
- For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order.
- Passing the variable once also makes it easier to design the script outside IS using Management Studio.
- This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks.
- I prefer to use the OLE DB connection manager because it's a de facto standard here.
Could anyone help me out with the following questions:
- Is the above possible?
- If so, how?
- If not, why not?
- If not, what would be the best way around this problem?
Thanx in advance,
Pipo
I have a variable SYear with the data type Integer and the value 2005.
Connection type is OLE DB, and my sql statement is:
DECLARE @MyYear Int
SET @MyYear = ?
I have set the variable User::Syear as Input with the parameter name=0, there is no result set. I set BypassPrepare both True and False. However, this simple statement does not work. I keep having an error. If I put integer value directly into @MyYear, it is fine. What is wrong in here? Somebody help me!
Hi,
How can I delete records from one table using date variable condition?
or should I use string?
here is the sql : DELETE FROM TABLE WHERE DATE = @VARIABLE
Hi!
I need help with some C# code. I have build a SSIS package with an Execute Process Task. I need to send dynamic variables in to my C# program so I thought it was a good idea to use the StandardInputVariable.
How do I get the variable in my C# code?
Thanks
Carl
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
Hi everyone,
How to define a Input variable in a Execute Sql Task??
I've defined a User::Inicio variable which contains 4 as value.
In Parameter Mappins it has been defined. Then, I've gone to General->Sql Statement and allocated the following SQL Statement:
UPDATE CARGAPROCESOS SET FECHAULTIMACARGA = [Inicio]
or
UPDATE CARGAPROCESOS SET FECHAULTIMACARGA = [User::Inicio]
Anyway, I'm stuck, both did not work
Thanks in advance for your comments
Can I retrieve a result set from a sp into a variable within a Execute SQL Task?
View 23 Replies View RelatedHi,
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
Thanks & Regards,
Prakash Srinivasan.
Hi,
Let's say that the query in my SQL Task returns a single integer number.
How can I put that single number in a variable?
Thank you.
Please help!
I am designing an SSIS package and need to change the value of a DateTime global variable with the value returned from an Execute SQL task. The queary is as follows:
Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'
The error message is as follows:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at VersionDate_Set, Execute SQL Task: Executing the query "Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'" failed with the following error: "The type of the value being assigned to variable "User::VersionDate" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: VersionDate_Set
SSIS package "Package.dtsx" finished: Success.
The variable is set to data type DateTime, but the value will not change. Any ideas?
Hello,
I've asked this question before and I've read the answers before and I still cannot get it to work. My task is simple, I want to use the execute sql task container to grab a value from a database and put it in a variable. I've done all the preliminary stuff such as running profiler to make sure that the package is getting the call to the database, setting up the ResultSet to be "single row" in the general tab, mapped the Result Set correctly, but nothing works. I get the same error every time.
This is my sql command:
select output_location as output_location
from script_master
Result Set is set up like this:
Result Name: output_location ; Variable Name: User::output_location
Here is the error I get:
Error: 0xC002F309 at Execute SQL Task, Execute SQL Task: An error occurred while assigning a value to variable "output_location": "The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
".
I don't know what I'm doing wrong, I've followed all the instructions exactly on how to populate a variable in this container. My variable is set up as a string, if I change it to object I can get it to work. I think this is because the object is allowing nulls. I really believe that the variable is not populating and that is why I'm getting errors.
Please help. If you could provide step by step example's that would really make my day.
Thanks,
Phil
I am building this as an expression, but it is not working. I am trying to return the row count into a variable to use later in an update statement. What am I doing wrong? I am using a single row result set. I have one variable defined in my result set. I am receiving an error stating: Execute SQL Task: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow". Any help is appreciated!
SELECT count(*) FROM hsi.itemdata a
JOIN hsi.keyitem105 b on a.itemnum = b.itemnum
JOIN hsi.keyitem106 c on a.itemnum = c.itemnum
JOIN hsi.keyitem108 d on a.itemnum = d.itemnum
WHERE a.itemtypegroupnum = 102
AND a.itemtypenum = 108
AND b.keyvaluechar = " + (DT_WSTR,2)@[User::Branch] + "
AND c.keyvaluechar = " + (DT_WSTR,2)@[User:epartment] + "
AND d.keyvaluesmall = " + (DT_WSTR,7)@[User::InvoiceNumber] + ")
Hi all,
I'm working with Execute SQL task. Connection type: OLE DB. With the following settings, the task works fine:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name
User::InputFile Input NVARCHAR 0
User::DesiredOutput Input NVARCHAR 1
SQLStatement:
Code Snippet
exec [spu_CreateOutput] ?, ?
However, I want to put in some conditions so I modified the task as:
Parameter mapping:
Code Snippet
Variable Name Direction Data type Parameter Name
User::OutputFile Input NVARCHAR 0
User::InputFile Input NVARCHAR 1
User::DesiredOutput Input NVARCHAR 2
SQLStatement:
Code Snippet
if(? <> 'NotUsed')
Begin
exec [spu_CreateOutput] ?, ?
End
But the modification doesn't work. The following message was thrown:
Error: 0xC002F210 at CREATE OUTPUT, Execute SQL Task: Executing the query "if(? <> 'NotUsed')
Begin
exec [spu_CreateOutput] ?, ?
End
" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: CREATE OUTPUT
Can anyone tell me what I have been wrong with it? It seems that parameter mapping can only apply for a single select statement/function/procedure call :-?
Thank you,
GiaHi
I'm using a DateTime variable in SSIS 2008 that is used to set the SQLStatement property of an Execute SQL Task.
"DELETE FROM Labor WHERE Week = '" + (DT_WSTR, 100) @[User::Week] + "'"
Week is the next Sunday:
DATEADD( "day", @[User::DaysTillSunday] , @[User::TheDayThatIsTwentyMinutesPrior] )
DaysTillSunday:
DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] ) == 1 ? 0 : 8 - DATEPART( "dw", @[User::TheDayThatIsTwentyMinutesPrior] )
TheDayThatIsTwentyMinutesPrior:
(DT_DATE)(DT_DBDATE)DATEADD("minute",-20,GETDATE())
The SSIS Package deletes the current week's data, reloads it with fresh data, then calculates the difference between the current week and last week.
The problem is that randomly, instead of deleting the current week, it will delete the previous week. This happens maybe 5-10% of the time. At least it does until I rebuild the package and import it into SQL Server again.
I'm guessing that the Execute SQL Task is not updating the value of the Week variable before it executes. I started with the source type being a variable. Then I decided to try Direct input and pass in the Week as a parameter (OLE DB Connection Type). That didn't work either.
Most recently I tried writing the Week variable to a table first, then having a sequence container with all the tasks second. Slightly better but I still saw the date was wrong 2 times in about 90 executions. I was hoping that writing the Week variable out to the database would force an update of any associated connections to it, but that didn't seem to work.
I'm trying to use "findstr.exe" to extract some lines of interest from a data file, which I will later load to a table. I'd like to issue this form of a command:
findstr.exe "^SEARCHSTRING" "srcfile" > "dstfile"
I build the arguments using expressions, and both the search string and source file get correctly set. However, the ">" seems to be ignored--I can see the lines spitting out to the temporary window when I run under VS.
QUESTION: how do you redirect the output of a command run under an Execute Process Task?
There are two options to specify the subpackage location (SQL Server or file location). I'd like to know how I can specify a variable name that points to the file location so I avoid hard coding the file location which could change during production installation.
View 4 Replies View RelatedI've encountered a new problem with an SSIS Pkg where I have a seq. of Execute SQL tasks. My question are:
1) In the First Execute SQL Task, I want to store a single row result of @@identity type into a User Variable User::LoadID of What type. ( I tried using DBNull Type or Object type which works, not with any other type, it but I can't proceed to step 2 )
2) Now I want to use this User::LoadID as input parameter of What type for the next task (I tried using Numeric, Long, DB_Numeric, Decimal, Double none of there work).
Please give me solutions for the above two..
In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task?
View 9 Replies View RelatedIs it possible to CREATE a database using SSIS and name it using a variable / parameter mapping.
if not, how can I use SSIS to take a username from a database table and create a database with that name?
thanks is advance....b
A stored function is created in MySQL Server running on Linux with following info:
mysql > delimiter $$
mysql > CREATE FUNCTION GetMaxKeyForSampleTable()
-> RETURNS DOUBLE READS SQL DATA
-> BEGIN
-> RETURN (SELECT MAX(MJD) FROM tblSampleTable);
-> END;
Query OK, 0 rows affected (0.02 sec)
mysql > delimiter ;
***The above function is successfully stored in the database.
"Execute SQL Task" add-in module has following info:
Name: Execute SQL Task
Description: Execute Task
TimeOut: 0
CodePage: 1252
ResultSet: Single row
Connection Type: ADO.NET
Connection: .MySQLServerLinux
SQLSourceType: Direct Input
SQL Statement: SELECT GetMaxKeyForSampleTable() AS MaxKey
IsQueryStoredProcedure: True
ByPassPrepare: False
Result Set:
Result Name Variable Name
MaxKey User:_dMaxKey
The following steps are taken:
1. Clicked "Parse Query" push button which results a pop-up dialog box -
"The query parsed correctly".
2. Clicked "OK" button.
3. Right clicked "Execute SQL Task" add-in module.
4. Selected "Execute Task".
"Execute SQL Task" changed its color from white to yellow to red
which means excution failed.
Please help me to figure out what should be done to make the excution successful.
Thank you very much in advance.
Paul Cho
Hi
Got a problem with 'Execute SQL Task'. When I click to open the 'Execute SQL Task Editor', add a connection then click on 'Parameter Mapping' then click 'Add' button the window disappears. I have re-installed visual studio and applied SP1 but the problem is still there.
Any Ideas?
Nickie
Hi!
I want to make an Execute Process Task that will make a connection with VCP.exe (Secure FTP from SecureCRT, you need to install all components from SecureCRT to have this one. It also fixes your system paths so you dont need to include the working directory).
In Expression Window i managed to create an expression that will create the connection string that looks like this:
"vcp.exe -pw password username@222.222.222.222:/home/username/tickets/" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000" + " c:\DATA\" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000"
Which forms something like that :
vcp.exe -pw password username@222.222.222.222:/home/username/tickets/grnti_200605080000 c:DATAgrnti_200605080000
Connection string works perfectly while testing in cmd.exe or directly running with Run..., but within SQL SSIS i get the message :
SSIS package "Package.dtsx" starting.
Error: 0xC0029153 at VCP to Srv, Execute Process Task: File/Process "grnti_200605080000" does not exist in directory "vcp.exe -pw password username@222.222.222.222:homeusername icketsgrnti_200605080000 c:DATA".
Error: 0xC0024107 at VCP to Srv: There were errors during task validation.
SSIS package "Package.dtsx" finished: Success.
Now this message seems a bit odd, because im only trying to run an application with all the arguments with it.
Anyone experienced anything similar, or should i use another approach on this one?
Thanks!
Sebastijan L.
Ok ! Problem solved, will keep the thread as it might be usefull to someone else.
I changed the expression from Executable to Argument cut the "vcp.exe" out and it works like a charm!
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100)
SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName)
SELECT
@Server,
role.name,
member.name
FROM
sys.server_role_members rm
inner join
sys.server_principals member
ON
rm.member_principal_id = member.principal_id
inner join
sys.server_principals role
ON
rm.role_principal_id = role.principal_id
********Begin Errors***************
" failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task I
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'.
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
I am trying to create an SSIS package to transfer data from one database to another. Prior to transfering the data I want to delete the existing data in the target table. When I try to configure the task I get this message:
The task with the name "Execute SQL Task" and the creation name "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" is not registered for use on this computer.
Contact Information:
Execute SQL Task
Prior to installing .NET 3.0 I did not have this problem. Any thoughts on how to resolve this problem? My thought is there was an installation registration issue.
Thanks in advance for your help.
scsmith
In my SSIS Package, I have one Execute SQL Task containing a few SQL Statements of the format:
"DELETE FROM <Table_Name>", followed by one SQL statement for executing a stored procedure with an output parameter of the format: "EXEC <StoredProcedure_Name> ? OUTPUT". The output of the stored procedure has been mapped to a global package variable (data type: nvarchar).
If I remove the SQL Statements of the format: "DELETE FROM <Table_Name>" from within the Execute SQL Task, the stored procedure returns the desired output. However, If I introduce these SQL statements in the Task just prior to the "EXEC <StoredProcedure_Name> ? OUTPUT" SQL Statement, the output returned to me always contains a part of the first set of SQL Statements.
Here is a sample output that I get:
"The data corresponding to the ECO: 35053776 has not yet arrived.The data corresponding to the ECO: 35054112 has not yet arrived.
em]
WHERE LEN([ID]) = 12 AND
[ID] LIKE N'100%' AND
[ID] LIKE N'%0';
DELETE
FROM [dbo].[TempECOItem]
WHERE LEN([ID]) = 9 AND
[ID] LIKE N'71%';
EXEC dbo.LoadData ? OUTPUT
"
If you notice, the output that I receive from the stored procedure contains a part of the SQL statements within the Execute SQL Task.
The Execute SQL Task has an OLE DB connection type. I use a "Direct Input" SQL Source Type and my database is a SQL Server 2005 Database. It seems as though the output variable is automatically being set to the SQL Statements in the Execute SQL Task. I even debugged this Package and have found that only at the end of the Execute SQL Task, the variable receives the above value. Prior to this, the variable is empty.
Does anyone know what is going on or, does anyone know of a workaround? Any help would be appreciated.
hi
I would like to create a SSIS package that is going to be called by store procedures.
What i have done so far.
1) I created a Execute SQL task that come with this statement e.g. Seleect * from tblA where BD >= ? and BD =< ?
2) I save this package as a DTSX file and will called it from a proc.
My intention is to pass 2 values when i call the proc. What should do next? any guided tutorial or steps i would be happy. thanks