I am trying to run this statement
Select Calims, ProCode From Inquiry Where ProCode Between 80000 and 89999
ProCode is a varchar but I am still checking a range on it.
It seem to work fine but then there is some invalid data entry in this column
for example 'abace' or '100i' so I get the error.
1) how I can exclude them out of my query.
Someone suggested the following but I dont understand how do achieve that. thanks
" However, there would appear to be different data types. If Value is a character
--based type then you may want to limit the search by first extracting numeric values
-- with something like ISNUMERIC(Value) = 1 and then converting them to numerics using
--the convert function - CONVERT(int, Value) BETWEEN 10000 and 20000."
Hi all iam trying to but a varchar variable into a TEXT var but i get this error "The assignment operator operation cannot take a text data type as an argument"
Hi: I have a column call Date_Sent (28/02/2004)(dd/mm/yyyy) format as varchar at beginning. I want to convert to other column as datetime. I use Query like: SELECT CAST(SUBSTRING(Date_Sent,1,2)as int) + '/' +CAST(SUBSTRING(date_sent,4,2) as int) + '/' +CAST(SUBSTRING(DATE_SENT,7,4) as int) From MyTable It is not working, anybody can give me some advise! thanks!
hi i want to insert the varchar value inter column, how can i convert the values and insert in to the record if i give direct column name i am getting a message insert into EMP(id) SELECT name from STU
i am getting a message like this Syntax error converting the varchar value '200.00' to a column of data type int.
I am using a varchar datatype for PIN number to handle zero at start. Now i want to do mathematical calculation to encrypt the PIN so i need to convert that varchar datatype to int so that zero should not be discarted after conversion. i.e. 0123 and 123 must not be treated as same PIN.
Please kindly give me a way out. I am using RSA encryption.
Using SQL 2005. I have a field with dollar amounts but field type is VarChar. Need to convert to number to sum. What's the best way to do this or how can I sum a field type Varchar that has dollar amounts. Thank you, David
I want to print in an error message a money value but have to convert it to a varchar first. I do not have any clue how to do this. Could someone help me out?
SELECT @iError = @@error, @iRowCount = @@rowcount IF(@iError <> 0 OR @iRowCount <> 1) BEGIN CONVERT(@dValue, @cValue) set @cError = 'Error attempting to insert new record. Product : ' + @cProduct + ' Sub-account : ' + @cSubAccount + ' Cost : $' + @cValue RAISERROR(@cError, 16, 1) END
I have a datetime column and I would like to update another column in the same table with the varchar value of date. e.g. date column has 06-08-2008 as a value. I would like to have the same value in the varchar field.
wondering which function can I use to accomplish this task?
Hi, Can any one help me in that case? I have 2 colomns one have the month (1,2,3,4,....,12) and the other have the years (2007,2008,....) I want to merge both in one date field MM/DD/YYYY and the day will always be '01' Thank you M.Maraghy
Ok i know this is simple but i just don't know the syntax. What I haveis a bunch of values and i want to be able to display them as moneyvalues with a $ in front.eg.160000001000160000TO THIS$16,000,000.00$1000.00$16,000.000I'm using MS SQL 2000Cheers
I have imported data from excel file. When data came to SQL table, the typeof AMOUNT column was varchar. I tried to convert and cast amount type ofamount column to number type but it does not allow me to convert.What is the best way of importing data into SQL and type stays the same asit was in excel file ?Or anyone has any better solution, please let me.Thanks.
I have a field that contains values such as 8ft , 7ft, 18ft I have a report in reporting services that shows this:
Before Restock After Restock
Date 1/12/2008 8ft 9ft
1/13/2008 10ft 7ft 1/14/2008 5ft 4ft
I want to create a subquery that grabs the before restock and figures out if it sheds the "ft" part of the value, and then put in a where before restock > (greater than) After Restock.
Is this possible? I'm trying to user a lookup task and the data I want to compare is a varchar to float. How can I do this? I tried using the data conversion task and it didn't work and also tried cast and convert. Is this even possible or is there a way around it?
I have a Data Control Task that has a OLE DB Source and corresponding OLE DB Destination Data Flow Task. In the referenced source table there exists a field defined as a varchar(12), in the corresponding destination table it is defined as a binary(12). How do I perform this conversion?
I tried inserting a Data Conversion Task and assigning the new data type as byte stream[DT_BYTES] and a Length = 12, but this was a bust. Output test is as follows:
Error: 0xC020901C at DFT - Windows, OLE_SRC - Windows [1]: There was an error with output column "Payload" (40) on output "OLE DB Source Output" (12). The column status returned was: "The value could not be converted because of a potential loss of data.".
Hi, I have a talbe with a column type varchar(8000). i am facing problems sometimes as it corsses the limit also have the problems with special characters. so i went through few articles and been advised to use xml datatype. but when i am changing comumn name from varchar (8000) to xml as: alter table tblStudentForm alter column FormDetails xml not null i am getting following error: Msg 9400, Level 16, State 1, Line 1 XML parsing: line 46, character 402, unexpected end of input The statement has been terminated.
I have a table Table1 which has a Col called "Msg" datatype image<binary>. Msg alreay has the plain text or RTF text as a image datatype (binary)If I execute the following query "Select Msg from Table1 where id =3" then this query is returning the following ASCII/Binary data.Msg = "0x7B5C727466315C616E73695C616E7369637067313235325C64656666305C6465666C616E67313033337B5C666F6E7474626C7B5C66305C6673776973735C66707271325C66636861727365743020417269616C3B7D7B5C66315C6673776973735C66707271325C666368617273657430204D6963726F736F667420"Can any body tell me how can I convert the above binary data to plain text from my query?Thanks for any reply.
I write using the SQL ODBC driver from software into a SLQ table called UPSSHIPMENT the format is as followed: JobNumber varchar 50 Weight real 4 FreightCost varchar 8 TrackingNumber varchar 50 Shipmethod varchar 50 VOIDID varchar 3
I then have a trigger set to update the PACKAGE table as followed CREATE TRIGGER [UPS] ON dbo.UPSSHIPMENT FOR INSERT
AS
BEGIN UPDATE PACKAGE SET WEIGHT = inserted.WEIGHT, FREIGHTCOST = inserted.FREIGHTCOST, TRACKINGNUMBER = inserted.TRACKINGNUMBER, COMMENTS = inserted.SHIPMETHOD FROM PACKAGE INNER JOIN inserted on PACKAGE.JOBNUMBER = inserted.JOBNUMBER WHERE inserted.VOIDID = 'N'
UPDATE PACKAGE SET WEIGHT = '', FREIGHTCOST = '0.00', TRACKINGNUMBER = '', COMMENTS = 'UPS VOID' FROM PACKAGE INNER JOIN inserted on PACKAGE.JOBNUMBER = inserted.JOBNUMBER WHERE inserted.VOIDID = 'Y'
END
The format of the PACKAGE table is as followed Jobnumber varchar 50 FreightCost money 8 TrackingNumber varchar 50 Comments varchar 2000 Weight real 4
I am getting the following error --------------------------- Microsoft SQL-DMO (ODBC SQLState: 42000) --------------------------- Error 260: Disallowed implicit conversion from data type varchar to data type money, table 'TESTing.dbo.Package', column 'FreightCost'. Use the CONVERT function to run this query. --------------------------- OK ---------------------------
How do you use the convert function to change the data before the update? Thank You! :mad:
I have a table that imported as varchar. Most of these columns need to be in a numerical format. How can I convert a table with columns named column0 (needs to be int),column1 (stays varchar), column2(needs to be int), and column 3(needs to be int)?
I have a field in my database that is stored as varchar. The values are usually contain a decimal, and should have really been a float or decimal. In order for me to do analytics in my BI environment, I need to convert this to a float or decimal.
eg of values.
10.00 20.00 0.00 15.00
or could be missing when I use cast(value as float) or cast(value as decimal(9,2)) or convert(float, value) I get an error
declare @found int; set @found = 'select sid from StickyContent where StickyId='+0+' and UserId='+171 exec (@found) delete from StickyContent where sid = @found
I need to pass this statement from my UI i.e in a single query. I am getting this error.
"Conversion failed when converting the varchar value 'select sid from StickyContent where StickyId=' to data type int. "
I am new to T-SQL development and here's what I am trying to do.
declare @cmd varchar(255) set @cmd = 'select dbid from sys.sysdatabases where dbid not in (1,2,3,4)'
while (@cmd <=13) begin insert into #dbcheck values (@cmd) Set @cmd = @cmd + 1 end
but it is giving me an error
'Msg 245, Level 16, State 1, Line 3 Conversion failed when converting the varchar value 'select dbid from sys.sysdatabases where dbid not in (1,2,3,4)' to data type int.'
