Hello all I want to make a varchar datatype in sqlserver which does not accept numbers ( only letters will be accepted ) what is your suggetion ( I should mention that I use storedprocedures in my applications)
sincerely yours Mohsena
Need to know if the varchar datatype field will ingore leading zeros when compared with numeric datatype ?
create table #temp
(
code varchar(4) null,
id int not null
)
insert into #temp
[Code] .....
I have a table that contains a lot of demographic information. The data is usually small (<20 chars) but ocassionally needs to handle large values (250 chars). Right now its set up for varchar(max) and I don't think I want to do this.
How does varchar(max) store info differently from varchar(250)? Either way doesn't it have to hold the container information? So the word "Crackers" have 8 characters to it and information sayings its 8 characters long in both cases. This meaning its taking up same amount of space?
Also my concern will be running queries off of it, does a varchar(max) choke up queries because the fields cannot be properly analyzed? Is varchar(250) any better?
Should I just go with char(250) and watch my db size explode?
Usually the data that is 250 characters contain a lot of blank space that is removed using a SPROC so its not usually 250 characters for long.
Any insight to this would be appreciated.
hello,
i am using varchar(max) for my column story
I have also tried nvarchar(max) but what is happening is where ever there is enter pressed in the story it stores text till that area only.
well presently iam entering data(copy paste) directly in my database.
later fnctionality will include online insertion of all the dta including stories. these stories are between 500-800 character.
how do i solve it
Hi all,
I am using a varchar datatype for PIN number to handle zero at start. Now i want to do mathematical calculation to encrypt the PIN so i need to convert that varchar datatype to int so that zero should not be discarted after conversion. i.e. 0123 and 123 must not be treated as same PIN.
Please kindly give me a way out. I am using RSA encryption.
Thanks in anticipation.
Haider Abbas.
I have the following form in this adress:(it's framework 1.1 asp.net vb.net)http://admin.artemrede.pt/login.aspx?ReturnUrl=%2fdefault.aspxthe utilizador is: testepalavra passe is: 12345I'm using some text datatypes and some very big varchars the problem is that when you try to add a new record or to edit a existing record, if for example in one of the very big varchars or text, textboxes, several lines of text, It only puts in the database the 2 first words that you write. I used the VS debug and apparently everything looks ok......(if it would I probably hadn't this error....) Dim OurConnection As SqlConnectionOurConnection = New SqlConnection(conn_default)Dim OurCommand As SqlCommandOurCommand = New SqlCommand("Insert Into espectaculo (foto_destaque, thumb, area_prog, nome_espectaculo, coord, nome_comp, duracao, f_etaria, sinopse, iterancia, ficha, bio_interv, bio_comp, link_comp, notas_imprensa) Values (@fotod, @thumb, @areap, @ne, @coord, @nc, @duracao, @fe, @sinopse, @it, @ficha, @bioI, @bioC, @link, @notasp)", OurConnection)If (foto_destaque.Text = "") ThenOurCommand.Parameters.Add("@fotod", SqlDbType.VarChar, 12).Value = " "ElseOurCommand.Parameters.Add("@fotod", SqlDbType.VarChar, 12).Value = foto_destaque.TextEnd IfIf (thumb.Text = "") ThenOurCommand.Parameters.Add("@thumb", SqlDbType.VarChar, 12).Value = " "ElseOurCommand.Parameters.Add("@thumb", SqlDbType.VarChar, 12).Value = thumb.TextEnd IfIf (area_prog.Text = "") ThenOurCommand.Parameters.Add("@areap", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@areap", SqlDbType.VarChar, 50).Value = area_prog.TextEnd IfIf (nome_esp.Text = "") ThenOurCommand.Parameters.Add("@ne", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@ne", SqlDbType.VarChar, 100).Value = nome_esp.TextEnd IfIf (coord.Text = "") ThenOurCommand.Parameters.Add("@coord", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@coord", SqlDbType.VarChar, 100).Value = coord.TextEnd IfIf (nome_comp.Text = "") ThenOurCommand.Parameters.Add("@nc", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@nc", SqlDbType.VarChar, 50).Value = nome_comp.TextEnd IfIf (duracao.Text = "") ThenOurCommand.Parameters.Add("@duracao", SqlDbType.VarChar, 25).Value = " "ElseOurCommand.Parameters.Add("@duracao", SqlDbType.VarChar, 25).Value = duracao.TextEnd IfIf (faixa.Text = "") ThenOurCommand.Parameters.Add("@fe", SqlDbType.VarChar, 50).Value = " "ElseOurCommand.Parameters.Add("@fe", SqlDbType.VarChar, 50).Value = faixa.TextEnd IfIf (sinopse.Text = "") ThenOurCommand.Parameters.Add("@sinopse", SqlDbType.VarChar, 8000).Value = " "ElseOurCommand.Parameters.Add("@sinopse", SqlDbType.Text, 16).Value = sinopse.TextEnd IfIf (itener.Text = "") ThenOurCommand.Parameters.Add("@it", SqlDbType.VarChar, 200).Value = " "ElseOurCommand.Parameters.Add("@it", SqlDbType.VarChar, 200).Value = itener.TextEnd IfIf (ficha.Text = "") ThenOurCommand.Parameters.Add("@ficha", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@ficha", SqlDbType.Text, 16).Value = ficha.TextEnd IfIf (bio_interv.Text = "") ThenOurCommand.Parameters.Add("@bioI", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@bioI", SqlDbType.Text, 16).Value = bio_interv.TextEnd IfIf (bio_comp.Text = "") ThenOurCommand.Parameters.Add("@bioC", SqlDbType.Text, 16).Value = " "ElseOurCommand.Parameters.Add("@bioC", SqlDbType.Text, 16).Value = bio_comp.TextEnd IfIf (linkComp.Text = "") Or (linkComp.Text = "http://") ThenOurCommand.Parameters.Add("@link", SqlDbType.VarChar, 100).Value = " "ElseOurCommand.Parameters.Add("@link", SqlDbType.VarChar, 100).Value = linkComp.TextEnd IfIf (notas_press.Text = "") ThenOurCommand.Parameters.Add("@notasp", SqlDbType.VarChar, 5000).Value = " "ElseOurCommand.Parameters.Add("@notasp", SqlDbType.VarChar, 5000).Value = notas_press.TextEnd If OurConnection.Open()OurCommand.ExecuteNonQuery()OurConnection.Close()carrega()'grid1.DataBind()End IfEnd Sub Sub carrega()conn_default = ConfigurationSettings.AppSettings("ArtemredeConnection")Dim OurConnection As SqlConnectionOurConnection = New SqlConnection(conn_default)OurConnection.Open() Dim OurCommand As SqlCommandDim SelectCommand As StringSelectCommand = "select id_espectaculo, area_prog, nome_espectaculo, nome_comp from espectaculo"OurCommand = New SqlCommand(SelectCommand, OurConnection) Dim Select_DataAdapter As New SqlDataAdapter(OurCommand)Dim Select_DataSet As New DataSet'Dim SP_DataTable_Rowcount As IntegerSelect_DataAdapter.Fill(Select_DataSet, "Espectaculos")grid1.DataSource = Select_DataSetgrid1.DataBind()OurConnection.Close() End Sub
View 2 Replies View RelatedHi,
I have a talbe with a column type varchar(8000). i am facing problems sometimes as it corsses the limit also have the problems with special characters. so i went through few articles and been advised to use xml datatype. but when i am changing comumn name from varchar (8000) to xml as:
alter table tblStudentForm alter column FormDetails xml not null
i am getting following error:
Msg 9400, Level 16, State 1, Line 1
XML parsing: line 46, character 402, unexpected end of input
The statement has been terminated.
Please any one can advice how to alter on this.
Thanks
Dilip.
When creating tables:
If varchar expands according to how long the actual string is in each case, then why not set the varchar max characters very high, rather than be conservative about it?
For example, if you think your names will only ever be 30 chars you could set that column to varchar(30).But -- why not go ahead and set the column to varchar(100) anyway to be safe? Or is there some hidden storage cost to using 100 rather than 30 max chars?
I have a table Table1 which has a Col called "Msg" datatype image<binary>. Msg alreay has the plain text or RTF text as a image datatype (binary)If I execute the following query "Select Msg from Table1 where id =3" then this query is returning the following ASCII/Binary data.Msg = "0x7B5C727466315C616E73695C616E7369637067313235325C64656666305C6465666C616E67313033337B5C666F6E7474626C7B5C66305C6673776973735C66707271325C66636861727365743020417269616C3B7D7B5C66315C6673776973735C66707271325C666368617273657430204D6963726F736F667420"Can any body tell me how can I convert the above binary data to plain text from my query?Thanks for any reply.
View 1 Replies View RelatedWe have few stored procedures that use nvarchar datatype, this was not issue on SQL server 7.0 but in 2000 becomes a big issue.
For example query that runs for 3 minutes in SQL server 2000 by replacing NVARCHAR to VARCHAR the same query runs for 2 seconds.
The biggest challenge that I have deals with tables and user-defined datatypes of NVARCHAR that has been bounded to the table.
How can I alter those without data corruption?
I have a column on my table with the varchar(50) datatype. The whole column has the value 2014-04-31
I want to Convert the varchar(50)datatype to datetime datatype.
The table name is called - dbo.pracs
the column name is - LastDatUpaded
Need to fetch the date from parent table to chile table. This is the script ....
case When @AccountingDate IS NULL THEN NULL ELSE CONVERT (varchar,@AccountingDate , 101) END,
Case When @InventoryDate IS NULL THEN NULL ELSE CONVERT (varchar,@InventoryDate,101) END,
Case When @StatusDate IS NULL THEN NULL ELSE CONVERT (varchar,@StatusDate,101) END,
Case When @LastInstallmentDate IS NULL THEN NULL ELSE CONVERT (varchar,@LastInstallmentDate,101) END,
Case When @RetailFirstPayDate IS NULL THEN NULL ELSE CONVERT (varchar,@RetailFirstPayDate,101) END ,
Case When @LeaseFirstPayDate IS NULL THEN NULL ELSE CONVERT (varchar,@LeaseFirstPayDate,101) END ,
Case When @DayToFirstPayment IS NULL THEN NULL ELSE CONVERT (varchar,@DayToFirstPayment,101) END ,
Case When @EntryDate IS NULL THEN NULL ELSE CONVERT (varchar,@EntryDate,101) END ,
Case When @DealBookDate IS NULL THEN NULL ELSE CONVERT (varchar,@DealBookDate,101) END ,
Case When @RealBookDate IS NULL THEN NULL ELSE CONVERT (varchar,@RealBookDate,101) END
declare @a varchar(10)
select @a= shiftstarttime from o_parameter
print @a
declare @b varchar(10)
select @b= shiftendtime from o_parameter
print @b
declare @dt varchar(20)
set @dt=Left(getdate(),12)
print @dt
declare @dt1 varchar(20)
set @dt1=Left(dateadd(dd, 1,getdate()),12)
print @dt1
declare @dt3 varchar(20)
set @dt3= @dt1 + space(0) + @a
print @dt3
declare @dt4 varchar(20)
set @dt4= @dt + space(0) + @b
print @dt4
output of above script is as fallow
09.30am
06.30pm
Aug 22 2007
Aug 23 2007
Aug 23 2007 09.30am
Aug 22 2007 06.30pm
now i want to convert @dt3 and @dt4 into datetime .
because i wnat to calculate datedifference in hours by using this function
SET @in_hour=DATEDIFF (HH ,@D1,@D2)
where @D1 and @D2 are datetime parameters.
but how can i get @dt3 and @dt4 into datetime so i can pass it to DATEDIFF() function.
so plz Guide me. or if u know how to write it then plz write here
i already use cast for it but it doesn't work.
so plz reply urgently.
I have a password column that needs to be converted from varchar to varbinary. Can anybody provide me a proper CONVERT statement syntax for it?
View 12 Replies View Related here is my code snippet
Session("matricN") = Trim(TextBox1.Text)
Dim txtValue As String
txtValue = Session("matricN")
da = New SqlDataAdapter("select MatricNumber,Name, Roles from Register where MatricNumber = " & txtValue, addRoleConn1)
MatricNumber is in varchar(50) datatype,, the errror says there is a syntax near "="
Hello,
I would like to change the datatype on a particular column from varchar to bigint across 100's of tables within a database.
I have the command ready which is:
ALTER TABLE tablename ALTER COLUMN columnname BIGINT
The problem happening is that it seems there are constraints across all the columns in every tables.
The error message is:
Server: Msg 5074, Level 16, State 1, Line 1
The object 'DF__tablename__columnname__0ABD916C' is dependent on column 'columnname'.
Server: Msg 4922, Level 16, State 1, Line 1
ALTER TABLE ALTER COLUMN columnname failed because one or more objects access this column.
I understand that if I delete this constraint, then it will let me modify the datatype of the column, but since there are tons of them and they are randomly named, how do I achive changing the datatype across multiple tables in bulk.
Why can varchar datatype variable only 4000 byte?
For example:
in a storedprocedure
declare @aa varchar(8000)
......
while
select @aa=@aa+@otherinfo
end
when the length is more than 4000 ,the data in the behind will be lost
Hi,
I have a excel file and i am trying to import zip codes to the database... but the some of the zip codes start with 06902 but the excel file treats them as float but i want to treat them as varchar...
How can i do it.
Regards
Karen
Hi I have a varchar(8000) and currently XML files are stored in varchar(8000).Some times when i am doing manuplactions in my varchar column i am getting with special characters error. so now i want to keep my column varchar(MAX) and when i am doing calculations i will convert my varchar datatype to xml datatype. By doing this i hope there wont be any special character problems.
When i am doing calculations with the wellformed xml i am getting error for both convert and cast methods as below
I am trying to do convert(xml,MyVarcharColumn)
Implicit conversion from data type xml to nvarchar is not allowed. Use the CONVERT function to run this query.
Also i tried with casting and getting same problme. is there any way to convert
please suggest me
Thanks
Dilip
Hi,
Can anyone please help me with the syntax for this query please. Error is "syntax error converting varchar value '/' to a column of datatype int"
Query:
Code:
select iCalls_Calls.Call_ID,iCalls_Calls.Requestor,Type,Scope,iCalls_Calls.Status_ID,iCalls_Status.Status_I D,
iCalls_Status.Status_Label,((select Count(*) from iCalls_Events where Call_ID = " & Session("Call_ID") & " ) + ' /' + (
select Count(*) from iCalls_Events where Call_ID = "& Session("Call_ID") & " and Events_Flag <> 0)) as Countrec from
((iCalls_Calls inner join iCalls_Status on iCalls_Calls.Status_ID=iCalls_Status.Status_ID ) inner join iCalls_Users on
iCalls_Calls.Requestor=iCalls_Users.User_ID) left outer join iCalls_Messages on iCalls_Calls.Call_ID=iCalls_Messages.Call_ID where Requestor='" & Session("User_ID") & "' AND iCalls_Calls.Status_ID <> 6 order by iCalls_Calls.Call_ID
Thanks...
I am building a table change log that will track each attribute update and include the original and new values.
[BatchYearMonthKey] [int] NULL,
[BatchYearMonthDayKey] [int] NULL,
[AccountID] [varchar](200) NULL,
[Attribute] [varchar] (200) NULL,
[Old_ValueAtrDefault] [varchar] (200) NULL,
[New_ValueAtrDefault] [varchar] (200) NULL,
[Old_ValueAtrLong] [varchar] (max) NULL,
[New_ValueAtrLong] [varchar] (max) NULL
The challenge that the spectrum of varchar lengths across the table. I have one attribute that requires varchar(max) and all other attributes (about 40) are varchar (200).
I am trying to accomplish the following:
Account ID Status
1 Enabled
Now changed to
AccountID Status
1 Disabled
My log table will look like the following:
[BatchYearMonthKey] BatchYearMonthDayKey] [AccountID] [Attribute] [Old_ValueAtrDefault] [New_ValueAtrDefault] [Old_ValueAtrLong] [New_ValueAtrLong]
201504 20150409 1 Status Enabled Disabled NULL NULL
My question:
I created two fields (Old_ValueAtrLong and New_ValueAtrLong) dedicated for the one attribute that is a varchar (max). I was trying to avoid storing [Status] for example that's a varchar(200) in a field that is varchar(max). Is this the right approach? Or are there other recommendations in how to handle storing the data in the most efficient manner?
Getting error
Converting DataType forn Varchar to smalldatetime
when running a job (in SQL Server 2005 ) which calls a SP in the step...
this worked fine in SQL Server 7
the step is like this ....
exec spGet_Prism_Sales_History 'ABC', '2006-09-01', '2006-09-31', 1
Hi,
I am updating a remote table using linked server in sql server 2005.
but in case of varchar and nvarchar i am getting an error :
"OLE DB provider "SQLNCLI" for linked server "LinkedServer1" returned message "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Msg 16955, Level 16, State 2, Line 1
Could not create an acceptable cursor."
thanks in advance.
Thanks & Regards
Pintu
Hi All:
I am new to Sql 2000 database,Now I'm planing to create a table in my databse,my table included below fields like this :
PoNo(the length is 15 characters) ,Supplier Name(the length is 50 characters).etc
but I don't how to select the datatype for them. should I select Char or VarChar ?
which one is the best slection ?
thans in advanced!
I'm trying to convert a column in my source table of datatype varchar(6) to a column of datatype int in my destination. I tried using the Derived Column/Data Conversion transformations but none of them worked. So, I tried using the following C# (credits to the original poster) and getting an error during compilation.
Note: "MyCol" is the Input Column I've specified in the Script Component and "CleanCol" is the Output column I've specified as datatype [DT_I4].
public override void Input0_ProcessInputRow(Input0Buffer Row)
{
int colOut = 0;
if (!Int32.TryParse(Row.MyCol, out colOut))
{
Row.CleanCol_IsNull = true;
} else {
Row.CleanCol = colOut;
}
}
The best overloaded method match for 'int.TryParse(string, out int)' has some invalid arguments
The other expression I've tried was:
ISNULL(MyCol) ? (dt_i4)"" : (dt_i4)MyCol
From the above code, you might have understood that the source field has some blank records as well in the MyCol field.
What is the best possible way to do the conversion from a String to Int or fixing the error from the above.
Good afternoon,
I have an issue with an ssis variable datatype.
The scenario is as follows:
I have a stored procedure:
PROCEDURE [dbo].[sp_newTransaction]
@sourceSystem varchar(50),
@txOut NUMERIC(18,0) OUTPUT
AS
insert into scn_transaction (sourceSystemName) values(@sourceSystem);
SELECT @txOut = @@identity
Whose purpose is to perform an insert into a table and return me the identity value of the inserted record, which I'll then use throughout the rest of my package. The identity column in the inserted table is numeric(18,0).
I execute the stored proc with the following sql with an OLE DB connection manager:
exec sp_newTransaction ?, ?
The first parameter is a string variable from earlier in the package, and the second is the output parameter. I have the following parameter mappings to the execute sql task:
User:ystxId output numeric 1 -1
User:ourceSys input varchar 0 -1
The proc is correctly called, and the row insesrted, however I get a type conversion error when SSIS attempts to map the return parameter to my package variable... I've tried all sorts of combonations, and can't seem to get it to execute.
At one point I wasn't returning a numeric, but rather an int from the stored proc, and all was well until I went to use the variable in a derived column later in the package, and the type was converted quite incorrectly (a 1 was 77799789080 or some such), indicating a type conversion error likely related to the encoding of the number.
I'd like to keep the datatypes as numeric and make ssis use those - any pointers are greatly appreciated as to what type my package variable should be to allow proper assignment of a sql server numeric type to it.
Thanks much,
B
Database is SQL Server 2000
I have a field in a table that stores date of birth. The field's datatype is char(6) and looks like this: 091703 (mmddyy). I want to convert this value to a datetime datatype.
What is the syntax to convert char(6) to datetime?
Thank you in advance.
Hi,
I imported a table from Accees to SQL 7 with data in it.
I need to modify one of the datatype columns to "datetime" from nvarchar.
I tried to convert it manually, in SQL Server Enterprise Manager tool, but it gave me an error.
I also tried, creating another column "DATE2-datatype:datetime" and updating the column with the old one.
UPDATE users SET DATE2 = DATE.. But it also faild,..
How can I modify the column?
Thank you.
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
I am trying to create a store procedure inside of SQL Management Studio console and I kept getting errors. Here's my store procedure.
Code Block
CREATE PROCEDURE [dbo].[sqlOutlookSearch]
-- Add the parameters for the stored procedure here
@OLIssueID int = NULL,
@searchString varchar(1000) = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @OLIssueID <> 11111
SELECT * FROM [OLissue], [Outlook]
WHERE [OLissue].[issueID] = @OLIssueID AND [OLissue].[issueID] = [Outlook].[issueID] AND [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
ELSE
SELECT * FROM [Outlook]
WHERE [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
END
And the error I kept getting is:
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 18
The data types varchar and varchar are incompatible in the modulo operator.
Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 21
The data types varchar and varchar are incompatible in the modulo operator.
Any help is appreciated.
HI,I have a table with IDENTITY column with the datatype as INTEGER. Nowthis table record count is almost reaching its limt. that is totalrecord count is almost near to 2^31-1. It will reach the limit with inanother one or two months.In order to avoid the arithmentic overflow error 8115, we would likechange the datatype from INT to BIGINT. we hope this will solve ourproblem.How do I approch this datatype conversion?. Since the data count ishuge, that leads to a long down time of database.we need better approach or solution for this problem?. kindly give mea better solution that will reduce the total downtime of the productiondatabase.?.Regards
View 1 Replies View Related
Hi guys..
i have so doubts in my mind and that i want to discuss with you guys... Can i use more then 5/6 fields in a table with datatype of Text as u know Text can store maximu data... ? acutally i am trying to store a very long strings values into the all fields. it's just popup into my mind that might be table structer would not able to store that my amount of data when u use more then 5/6 text datatypes...
and another thing... is which one is better to use as data type "Text" or "varchar(max)"... ?
if any article to read more about these thing,, can you refere to me...
Thanks and looking forward.-MALIK
For the life of me I cannot figure out why SSIS will not convert varchar data. instead of using the table to table method, I wrote a SQL query so that I could transform the datatype ntext to varchar 512 understanding that natively MS is going towards all Unicode applications.
The source fields from Access are int, int, int and varchar(512). The same is true of the destination within SQL Server 2005. the field 'Answer' is the varchar field in question....
I get the following error
Validating (Error)
Messages
Error 0xc02020f6: Data Flow Task: Column "Answer" cannot convert between unicode and non-unicode string data types.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - Query" (28)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
DTS used to be a very strong tool but a simple import such as this is causing me extreme grief and wondering of SQL2005 is ready for primetime. FYI SP1 is installed. I am running this from a workstation and not on the server if that makes a difference...
Any help would be appreciated.