I have used cursors in a similar way 100 times (but not in a couple years). I am selecting 4 columns from a table and inserting them into 4 variables and then calling a stored proc with those 4 and a few other already defined variables. The already set variables are fine. But the variables which should be set by the cursor are coming up as NULL (I can tell because they are spit out as 'NULL' by the RAISERROR). There are no rows with NULL values in the table...
BEGIN TRY
-- Set CR First Last for each report type
DECLARE@RowNumOrderBy VARCHAR(40),
@StatCode VARCHAR(50),
@UpdateTargetField VARCHAR(50),
@UpdateSourceField VARCHAR(50)
Hello All,I am trying to use a variable(@varStr ) in a cursor declaration. But I am unable to use it. something like:declare @intID as intset @intID = 1DECLARE curDetailRecords CURSOR FOR (select fnameFrom Customers where id = @intID)Can we not use a variable in a cursor declaration.?ThanksImran
I have a cursor that goes through a table with the names of all the database in my server. So for each fetch, the cursor gets the name of a database and assign it to a variable, @databaseName, and try to do some queries from that database by using the command "USE @databaseName". But "USE" doesn't take the variable @databaseName; it is expecting a database name (i.e. USE master).
Here is my code:
Declare @databaseName varchar(50) Declare c_getDatabaseName CURSOR for SELECT name from tblDatabases OPEN c_getDatabaseName FETCH NEXT from c_getDatabaseName into @databaseName While @@FETCH_STATUS = 0
I have problems to place my variable into the select statement.
DECLARE @DB_NAME varchar(64) DECLARE MR_ReqPro_DB_cursor CURSOR FOR select name from dbo.sysdatabases where name like '%MR_req%' OPEN MR_ReqPro_DB_cursor FETCH NEXT FROM MR_ReqPro_DB_cursor INTO @DB_NAME
WHILE @@FETCH_STATUS = 0 BEGIN print @DB_NAME; --works fine
Select NAME, FILEDIRECTORY FROM @DB_NAME.MR_ReqPro.RQDOCUMENTS WHERE (FILEDIRECTORY LIKE '%\%');
FETCH NEXT FROM MR_ReqPro_DB_cursor INTO @DB_NAME END CLOSE MR_ReqPro_DB_cursor DEALLOCATE MR_ReqPro_DB_cursor
GO
How could i use a variable like @DB_Name in my select ?
I am writing a custom query to determine if a legacy table exists or not. From My CMS Server I already have all the instances I have to query and I store the name of the instance in the @Instance variable. I cannot get those stubborn ticks to work right in my query. Below I am using the IF EXISTS statement to search the metadata for the legacy table.
DECLARE @Found tinyint DECLARE @Instance varchar(100) set @Instance = 'The Instance' IF (EXISTS (SELECT a.* FROM OPENROWSET('SQLNCLI', 'Server=' + @Instance + ';UID=DBAReader;PWD=DBAReader;','SELECT * FROM [DBA].INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = ''TheTable''') AS a)) SET @Found = 1 ELSE SET @Found = 0
They are sent to the sproc as null. Since they could be null I need to exclude them from posting to a temp table
Example
DECLARE @QuantityID uniqueidentifier, @LengthID uniqueidentifier, @CostID uniqueidentifier SET @CostID = NEWID() SELECT @QuantityID as ID UNION ALL SELECT @LengthID UNION ALL SELECT @CostID
Two values are null. I want those excluded from this table
Here is the example of what I am trying to do:
DECLARE @QuantityID uniqueidentifier, @LengthID uniqueidentifier, @CostID uniqueidentifier DECLARE @Temp as Table (id uniqueidentifier NOT NULL Primary key) SET @CostID = NEWID() INSERT INTO @Temp SELECT @QuantityID as ID UNION ALL SELECT @LengthID UNION ALL SELECT @CostID
We have a package with a package variable. This variable is of data-type 'DateTime'. However, when i try to pass the value 'NULL' the package fails... i use the following statement with 'dtexec.exe'
/SET Package.Variables[MyDate].Value;"NULL"
What's the correct syntax for passing null-values? But maybe (because i cannot find anything on this) i should ask if this is even possible...
I have a stored procedure where I gather some data and then insert the data into a table variable. I then attempt to go through each row of the table variable, asign the values to local variables to be inserted into other tables. However, the local variables show as NULL.BEGIN DECLARE @tblcontact table ( SOKey int, Cntctkey varchar(60), Cntctownerkey int, LASTNAME varchar(32), FIRSTNAME varchar(32), WORKPHONE varchar(32), EMAIL varchar(128), processed int DEFAULT 0 )
I am using a Execute SQL Task which takes package variables and passes them to an Oracle SP as parameters: {call oraclespname(?,?,?)} where of course the parameters are set up as input parameters on the correct tab in the SQL Task.
Well the data that is being put into the table in Oracle has a CHR(0) or a null appended to the end of it. Of course this makes no sense. Does anyone have an idea of why this is happening or a way to fix it. The data becomes fairly useless as is without doing a RTRIM(data,CHR(0)) on it first which is a work around but kind of a hack.
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
STATIC Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor declare ll cursor global static for select name, salary from ag open ll fetch from ll
while @@FETCH_STATUS=0 fetch from ll update ag set salary=200 where 1=1
close ll deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
DECLARE DBCur CURSOR FOR SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0 BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' + + 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' + + 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL' EXEC(@SQLCMD) PRINT @SQLCMD FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur DEALLOCATE DBCur
Part 2
SELECT T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE, SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE, SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT INTO #MAIN FROM ORDR T0 JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE WHERE ISNULL(T0.U_OB_TID,0) <> 0 GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is, how to join the part 1 n part 2? is there posibility?
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for select systudentid from satrans
declare @id int
open Q fetch next from Q into @id while @@fetch_status = 0 begin
declare c cursor for
Select b.ssn, SaTrans.SyStudentID, satrans.date, satrans.type, SaTrans.SyCampusID, Amount = Case SaTrans.Type When 'P' Then SaTrans.Amount * -1 When 'C' Then SaTrans.Amount * -1 Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
In my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.
The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.
Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
I run a stored procedure for which I have a return variable. The stored procedure returns the ID of a row in a table if it exists:
m_sqlCmd.ExecuteScalar();
The m_sqlCmd has been fed an SQLParameter with direction set to output. When the stored proc returns, I want to test it. Now when there IS a row it returns the ID ok. When the row doesn't exist, in my watch I have:
m_sqlParam.SqlValue with value {Null}
I can't seem to work out how to test this value out. I've tried several things but none seem to work.
This line compiles ok, but the following runs into the IF statement as if the SqlValue is null??
if (m_sqlParam.SqlValue != null).... {
// I'm here!! I thought the watch says this is null??? }
Sorry if this is obvious, but I can't work this one out!!
Looks like there was a fix and then I read this fix is not a fix. Does anyone know how this can be rectified? Does it mean that only Windows authentiation is the only way it works. The Software is over 2 years old, there are no excuses.
I having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
I am getting this error: "Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails." -- But my value is not null. I did a response.write on it and it show the value. Of course, it would be nice if I could do a breakpoint but that doesn't seem to be working. I'll attach a couple of images below of my code, the error, and the breakpoint error.
Server Error in '/' Application.
Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.Source Error:
Line 89: sContact.Phone = sPhone.Text.Trim Line 90: sContact.Email = sEmail.Text.Trim Line 91: sContact.Save() Line 92: Line 93: Dim bContact As Contact = New Contact()Source File: F:InetpubwwwrootOutman KnifeCheckout.aspx.vb Line: 91 Stack Trace:
hi,my structure table in database:Amount float(53) not null default 0when i try to run his script:alter table ABC alter column Amount float(53) nullit can only set the Amount to allow null, but can't set the defaultvalue to empty.anyone know how to set the field to allow null and default set toempty, no value.thanks
I've built a sample CLR function with the following declaration....
CREATE FUNCTION GetManager(@DeptCode nvarchar(3)) RETURNS nvarchar(1000) WITH RETURNS NULL ON NULL INPUT AS EXTERNAL NAME Assembly1.[ClassLibrary1.MyVBClass].MyManager
It returns the value "Unknown" as it would have for any unknown DeptCode, as-programmed.
I'm of the theory it should have returned NULL without actually firing the function? Or is this only for non-CLR items... or stored procedures, not functions?
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
Case when col>'20150901' then 'NULL' else col end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
How can we show database null for the case condition instead of string "null"?
I have two columns A (which allows nulls) and B( which does not allow nulls). How can I add the contents of columns A and B SO THAT I DO NOT GET A NULL RESULT WHEN A IS NULL.
The result of A+B concatanation will be stored in a column, C.
I've got a query on a particular table returning an odd result:
SELECT DISTINCT WorkStation FROM Invoice WHERE WorkStation Is Not Null ORDER BY WorkStation
This query returns the rows I'd expect plus a null row. This doesn't happen in databases at other sites, or in other tables at this site. The following query behaves as I'd expect returning only non-null AccountNumbers.
SELECT DISTINCT AccountNumber FROM Suppliers WHERE AccountNumber Is Not Null ORDER BY AccountNumber
I can't reproduce these results on another site on a table of the same structure, or on another table at this site.
Any suggestions as to what might be going on?
Pertinent info: --- select @@Version
Microsoft SQL Server 2000 - 8.00.760 (Intel X86) Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1) --- dbcc checkdb Abridged result: CHECKDB found 0 allocation errors and 0 consistency errors in database 'POS'. --- SELECT * INTO #Inv FROM Invoice
SELECT DISTINCT WorkStation FROM #Inv WHERE WorkStation Is Not Null ORDER BY WorkStation
Does not reproduce this problem (and so is a probable fix) but the questions remains, what causes this?
I have 595 default constraints in my database. I can return a list of them using the following:
select * from sys.default_constraints
Is there a way I can return a list of just the ones where NULL is still allowed? I want to update all of the columns with a default value to not allow NULLs.
