Hi all
iam creating view as follows
if exists drop view v1
create view v1 as
Select Employee_id ,round((datediff(m,min(start_date),getdate()))/12.0,1) as Years from Sagarsoft.dbo.o_employeeexp (nolock) group by employee_id,start_date
i want to check before creatuing view but i gives erros as follows
Incorrect syntax near the keyword 'drop'.
'CREATE VIEW' must be the first statement in a query batch.
No rows affected.
Malathi Rao
getting error when updting VIEW
UNION ALL view 'a.dbo.a'is not updatable because a partitioning column was not found. Severity 16 State 12 Example Line 194
Please advice..
Thanks,
ServerTeam
I keep getting the following error message whenever I try to create a new view from my local machine.
An unexpected error happened during this operation...Query Designer encountere a Query error: Unspecified error
Any help would be greatly appreciated. Thanks
I'm having this problem with SQL Server 2000...
Sample query in view definition:
SELECT somecol1 FROM sometable1
UNION
SELECT somecol2 FROM sometable2
I'm returning more columns in the SELECT than I've put in the sample and all the datatypes match for each column. But...
I get the row error when the view is run. If I run the first part in it's own results are returned. If I run the second on it's own I get results. I only get the error when they are UNIONed. There's no ordering or grouping.
Why would each of them run individually but not UNIONed together?
Also, if I remove ('' instead of table.column) one of the larger nvarchar columns from the first or second query, the UNIONed statement returns results just fine.
Any help would be appreciated.
Thanks,
Mike
I received this error while trying to view a job's history while using SSMS.
syntax error (ll DB Maint'']) (Microsoft.SqlServer.SmoEnum)
anyone see anything like this? I dropped a database yesterday that was included in the maintenance plan, but forgot to take it out of the plan itself.
Afternoon All
Hoping someone will be able to give me a little advice. I accidently delted a view from one of our application databases (Like you do!!).
I actually repliacated the database 2 month ago onto another server to do some testing. Me thinking I was clever decided to go to the copied database and copy the "syntax" for creating the view and then run it on the database I deleted the view but I get the following message I can't for the life of me work out what the problem is.
Has anyone seen this before ??
Server: Msg 207, Level 16, State 3, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.
Server: Msg 207, Level 16, State 1, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.
i tried running the statement :
(1)
create view qcostcentre
as
select * from dbo.costcentre.dtblcostcentre
>ERR: Msg 208, Level 16, State 1, Procedure qcostcentre, Line 4
Invalid object name 'dbo.costcentre.dtblcostcentre'.
(2)
create view qcostcentre
as
select * from costcentre.pcusers.dbo.dtblcostcentre
>ERR: Msg 7202, Level 11, State 2, Procedure qcostcentre, Line 4
Could not find server 'costcentre' in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
note: pcusers is a user of 2 database (costcentre & datamaster) with dbo_datareader owned & role schema .
Hello, I get this error:
Could not allocate ancillary table for view or function resolution
When I try to open a view that has never had a problem before today. I called Microsoft support and got a hot fix sent to me but unfortunatly it didnt install at all. I get an error:
You do not have any instance of SQL installed on this computer that qualifies for this hotfix.
Please check version and service pack requirements for this hotfix
And according to KB articles this problem should have been fixed by SP4 (which I have). So I dont know what to do. Could someone please help me??
Thanks
Mark
hiii, i am using asp.net 2005 and sql server 2005...i hav a page in which i have used gridview and sql data source..i have written the update command for the same..the problem is when i add the where clause in the query i get an error ,,,,here is the code
UpdateCommand="UPDATE SMEtre_Master SET FirstName =@FirstName, LastName =@LastName, Type_of_SME =@Type_of_SME, Agency_Name =@Agency_Name, Email =@Email, Address =@Address, Phone =@Phone, Mobile =@Mobile, Fax =@Fax, Experience =@Experience, City =@City, State =@State where SME_Id=@SME_Id"
How can a person view the error logs without being an sa?
View 1 Replies View RelatedCASE is not supported Error in a View
In SQL 7, when a view parses the below code, it generates a 'CASE is not Supported' error'; however, it will still generate and show the field with the CASE statements correctly; What might cause this error?
(Other useful info: this code is from a converted SQL 6.5 DB and the SQL 7 is running in compatibility mode, i inserted '' to remove concantenation of NULL problems;)
Example of display:
10132 Hampton, VA: A. Deepak Publishing
SELECT PublisherID, Info = CASE WHEN City IS NOT NULL
THEN City + CASE WHEN State IS NOT NULL
THEN ', ' + State ELSE '' END + ': ' ELSE ''
END + Publisher
FROM tblLibraryPublishers
Thank you!
Llyal
I have a view that is involved in an import. Sometimes the import will fail with the following error:
Msg 242, Level 16, State 3, Line 2
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
I can recreate the error just from selecting from the view. Why would something be converting when just selecting from view?
I’m receiving the following message when attempting to run the SQL statement below.
Error report:
SQL Command: force view "UIP_SOC"."SEG_VIEW_EWO_2"
Failed: Warning: execution completed with warning
-----------------------
CREATE OR REPLACE FORCE VIEW "UIP_SOC"."SEG_VIEW_EWO_2" ("CODE", "NAME", "EWO4", "EWO6") AS
SELECT DISTINCT code, name
FROM
(
SELECT seg_value AS code, seg_desc AS name, SUBSTR(seg_value,5,4) AS EWO4, SUBSTR(seg_value,5,6) AS EWO6
FROM UIP_SEGMENT_VALUES
WHERE seg_name = 'EWO' AND seg_value IN (SELECT ewo FROM stage_budget_v)
UNION
SELECT CODE,NAME FROM SEG_VIEW_PARENTS WHERE SEG_NAME = 'EWO' AND NOT (CODE IS NULL)
);
----------------
Referenced View Columns:
"SEG_VIEW_PARENTS" ("SEG_NAME", "CODE", "NAME")
Referenced Table Columns:"UIP_SEGMENT_VALUES"
"SEG_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"SEG_VALUE" VARCHAR2(20 BYTE) NOT NULL ENABLE,
"SEG_DESC" VARCHAR2(200 BYTE),
"SEG_TYPE" VARCHAR2(20 BYTE),
"SEG_COMPANY" VARCHAR2(20 BYTE)
I am tryung to create a indexed view..
CREATE VIEW vwLookAdmissionRecord
WITH SCHEMABINDING
AS
select episode_key as episode_key, ee.object_key, ee.encounter_begin_dt , cp.procedure from dbo.encounters e
join (
select episode_key as minepisode, min(isnull(e.object_key,e.Object_key_History) ) as object_key, min(e.encounter_begin_dt)as encounter_begin_dt
from dbo.encounters e
join dbo.CD_Procedure CP on CP.Procedure_CD = e.procedure_cd
where cp.procedure > 0
group by e.episode_key
)ee on e.object_key = ee.object_key
join dbo.cd_procedure cp on cp.procedure_cd = e.procedure_cd
CREATE UNIQUE CLUSTERED INDEX IDX_V1
ON vwLookAdmissionRecord (episode_key)
but i keep getting an error:
annot create index on view "dbo.vwLookAdmissionRecord" because it references derived table "ee" (defined by SELECT statement in FROM clause). Consider removing the reference to the derived table or not indexing the view.
How can I fix this?
In a SQL db we have we get the following error when just doing a simple select query against the view. Msg 217, Level 16, State 1...Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
No changes have been made to triggers or stored procedures recently and all was good prior to that.I understand that if my triggers loop this error will occur. But the select query does not fire any triggers functions or any other items. and the select worked with no issues last week.
Code:
SELECT TOP (100) PERCENT O.EID, O.OStart, O.OEnd, O.OID, T.Title, P.PStatus AS PS, dbo.CalcAge(O.OStart, ISNULL(O.OEnd, CURRENT_TIMESTAMP)) AS ODuration, O.PID,
O.Residence, O.b55, O.SplitItem, O.PeakStaff, O.ResidenceSub, O.Negotiator, O.Supervisor, O.TimeType, O.BreakPM, O.WorkEnd, O.Lunch, O.BreakAM, O.WorkBegin,
[code]....
I would like to have rows presented as columns. That's why I use the PIVOT function at the end.The resultset will be presented in Excel using an external connection to the view.
When I try to save the view I get the error
Msg 4104, Level 16, State 1, Procedure _TEST, Line 47
The multi-part identifier "vk.OppCode" could not be bound.
Code (restricting the columns that I actually have to the relevant columns only):
USE [DBTest]
GO
/****** Object: View [dbo].[_TEST] Script Date: 23-10-2014 17:24:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
I have written following SQL query, this creates temporary table, inserts rows into it. I need to create VIEW "vw_NumberOfAttachments" in the database. I initially created table using "CREATE TABLE" but then i got error as VIEW can not be filled by temporary table. Hence I am using DECLARE TABLE
--------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE sp_GetViewNumberOfAttachments
-- Add the parameters for the stored procedure here
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @emailMessageID bigint
DECLARE @metaDataStorageID bigint
DECLARE @numberOfAttachments int
DECLARE @AttachmentDetails TABLE
(
emailMessageID bigint,
metaDataStorageID bigint,
numberOfAttachments int
)
DECLARE ATTACHMENT_CURSOR CURSOR
FOR
SELECT emailMessageID, metaDataStorageID
FROM ppaEmailMessage
WHERE hasAttachments='true'
OPEN ATTACHMENT_CURSOR
FETCH NEXT FROM ATTACHMENT_CURSOR INTO @emailMessageID, @metaDataStorageID
WHILE @@FETCH_STATUS = 0
BEGIN
-- here the table name need to get dynamically the name of the attachment table
-- for a moment it is written as ppaMsOfficeDoc, but that should change dynamically
set @numberOfAttachments = (SELECT count(*) FROM ppaMsOfficeDoc WHERE metaDataStorageID = @metaDataStorageID)
INSERT INTO @AttachmentDetails(emailMessageID, metaDataStorageID, numberOfAttachments)
VALUES (@emailMessageID, @metaDataStorageID, @numberOfAttachments)
FETCH NEXT FROM ATTACHMENT_CURSOR INTO @emailMessageID, @metaDataStorageID
END
CLOSE ATTACHMENT_CURSOR
DEALLOCATE ATTACHMENT_CURSOR
IF EXISTS (SELECT TABLE_NAME FROM INFORMATION_SCHEMA.VIEWS
WHERE TABLE_NAME = 'vw_NumberOfAttachments')
DROP VIEW vw_NumberOfAttachments
GO
CREATE VIEW vw_NumberOfAttachments
AS
SELECT @AttachmentDetails.emailMessageID, @AttachmentDetails.metaDataStorageID, @AttachmentDetails.numberOfAttachments
FROM @AttachmentDetails
GO
END
GO
----------------------
I am getting following errors:
-----------
Msg 102, Level 15, State 1, Procedure sp_GetViewNumberOfAttachments, Line 57
Incorrect syntax near 'vw_NumberOfAttachments'.
Msg 137, Level 15, State 2, Procedure vw_NumberOfAttachments, Line 3
Must declare the scalar variable "@AttachmentDetails".
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near 'END'.
-----------
Can anyone please suggest whats wrong in there? Many thanks
I get the following error message:
SQL Exectution error,
Exectuted SQL statement: SELECT...
Source: .Net SqlClient data provider
Message: Timeout expired, timeout period elapsed prior to completion of the operation...
The view is operating on a table of ~250,000 records. The timeout occurs after 45 seconds, and none of the changes I make to the various timeout settings in the server or database seem to affect this.
When I execute the same sql statement in a query window it does complete, requiring about 7 minutes to execute.
How can I configure the view not to timeout when executing this query?
- Jim
Hellow,
This is the siuation:
I have on server A SQL 2005
on server B i have SQL 2000
I want to create in a database on server A a view which uses a linked server to get data from server B.
The linked server works fine.
But when I want to execute the creation of that view i get this error:
OLE DB provider "SQLNCLI" for linked server "BI_AX_LINK" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "BI_AX_LINK" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Procedure VW_ASSETTABLE, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "BI_AX_LINK". The provider supports the interface, but returns a failure code when it is used.
I have checked and the collations between the to databases are the same.
Anyone an idea on who to do such thing?
The rights that i have an server B or not that much.
Thanx for the info
I'm experiencing a problem while trying to index a view ... I'm using a single field and everything else are default entry's. I'm getting the Error Message 1939 .
The code is a follows:
USE [CS_WGO]
GO
SET ARITHABORT ON
GO
SET CONCAT_NULL_YIELDS_NULL ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
SET ANSI_PADDING ON
GO
SET ANSI_WARNINGS ON
GO
SET NUMERIC_ROUNDABORT OFF
GO
CREATE UNIQUE CLUSTERED INDEX [IDX_ALG_ORG_BEZ_V_1] ON [dbo].[ALG_ORG_BEZ_V]
(
[NDL] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = OFF) ON [PRIMARY]
GO
And the Error is:
Msg 1939, Level 16, State 1, Line 1
Index kann für die 'ALG_ORG_BEZ_V'-Sicht nicht erstellt werden, da die Sicht nicht schemagebunden ist.
For those of you who do not read German ... it means something like ..." The Index kann not be created because the view is not bound to a schema.
I don't understand what that means for me ... can someone explain that to me a little bit more in depth ... ?
Thanx ... wvg
I got a problem with my project on reporting services. I installed MS SQL Server 2014 (86x version), Report Builder 3.0 (for creating my reports) and Data Tools for my SQL Server.Now I created a report via Report Builder 3.0 with a SAP NetWeaver as a data source. I could create and view it in Report Builder 3.0.
But when I want to view it on my Report Server it doesn't work. I only get this error."An error has occurred during reporting processing. (Processing Aborted) An attempt has been made to use a data extension 'SAPBW' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)" ...
I found on the internet a few solutions. I installed the Data Tools for the 86x version of the SQL Server. Didn't work. And when I want to change some coding in "RSReportDesigner.config" it says that I'm not allowed to save the changes in this directory.
i created a query and when i run it like this i get data but when i add a value in the 2ed case for '2%' i get error.
Select a.email, case when a.reportnumber like '1%' then (select b.Reportnumber from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Reportnumber, case when a.Reportnumber like '1%' then (select b.stonebreakdown from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as Measurement, case when a.Reportnumber like '1%' then (select b.reportcarddate from ijasSummaryNo b where a.Reportnumber = b.Reportnumber) end as ijasDate,
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo
from t_RegisterInfoTemp a
Query works fine like this but when i add this (the one marked bold i get error)
case when a.reportnumber like '2%' then (select c.Reportnumber from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as imacsRepNo,case when a.reportnumber like '2%' then (select c.Measurement from appraisalsummaryblue c where a.reportnumber = c.reportnumber) end as Measurement2
This is the error.
Server: Msg 4414, Level 16, State 1, Line 1Could not allocate ancillary table for view or function resolution. The maximum number of tables in a query (260) was exceeded.
I am work on SQL Server 6.5
When I want to drop a view then appear error message :
"Msg 3701, Level 11, State 1 Cannot drop the view 'EUL_ODBC_SCHEMAS',
because it doesn't exist in the system catalogs."
Has anybody else experienced this, and do you know what is causing the warning?
Thanks in advance for any replies.
I have set up a locahost site in IIS using the "Configure Web Synchronization Wizard". One of the first test I was asked to do was to open a broweser and browse to http://localhost/MobileTest/sqlcesa30.dll
If all is well I should get a web page with the following line:
SQL Server Mobile Server Agent 3.0
But unfortunately I get an error stating :
"The server has encountered an error while loading an application during the processing of your request. Please refer to the event log for more detail information. Please contact the server administrator for assistance."
I checekd the Event log and found this error related the IIS launch process on my machine.
DCOM got error "Logon failure: unknown user name or bad password. " and was unable to logon .IWAM_Rataq in order to run the server:
where Rataq is the name of my machine. Could my IWAM_Rataq account be corrupted, my other sites on the machine work.
Infact if i put in a Test.htm page in the virtual directory MobileTest I am able to browse to the page.
Can the Account be re-set? is there another problem that I am not aware of. I have Norton Internet 2006 running could that be the reason? Could Norton be blocking the dll from loading? But the event log states it is a Account error.
Any ideas why this might occur? any help is always appreciated
I have a problem with inserting records into table when an indexed viewis based on it.Table has text field (without it there is no problem, but I need it).Here is a sample code:USE testGOCREATE TABLE dbo.aTable ([id] INT NOT NULL, [text] TEXT NOT NULL)GOCREATE VIEW dbo.aViewWITH SCHEMABINDING ASSELECT [id], CAST([text] AS VARCHAR(8000)) [text]FROM dbo.aTableGOCREATE TRIGGER dbo.aTrigger ON dbo.aView INSTEAD OF INSERTASBEGININSERT INTO aTableSELECT [id], [text]FROM insertedENDGODo the insert into aTable (also through aView).INSERT INTO dbo.aTable VALUES (1, 'a')INSERT INTO dbo.aView VALUES (2, 'b')Still do not have any problem. But when I need index on viewCREATE UNIQUE CLUSTERED INDEX [id] ON dbo.aView ([id])GOI get following error while inserting record into aTable:-- Server: Msg 8626, Level 16, State 1, Procedure aTrigger, Line 4-- Only text pointers are allowed in work tables, never text, ntext, orimage columns. The query processor produced a query plan that requireda text, ntext, or image column in a work table.Does anyone know what causes the error?
View 1 Replies View RelatedI am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedWrite a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies View RelatedHI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help