ad1 ad2
-----------------------------
younge joe
null null
youn null
want a result like that. anyone can help me to do it?
ad1+ad2
-----------------------
younge joe
null
youn
I am not sure If I can do this with a lookup, but what I would like todo is perhaps use lookup to retrieve a control date from anunassociated table to control what date is entered in another table.For example :the main table , table 1 has many entries with a field called date_enter which is the date the record was entered.table 2 has a control_dateIf the date entered in table 1 is less than or = to the control date wewant to give the user a error message.I am thinking of using display only field and lookup to set itWould need to have the date value from the control table available tothe active table of table 1 when entering the the date_enter.However as there is no join field between the two tables am not surehow to do it. Was thinking might have to add a key field that wasallways null and in the BEFORE EDITADD EDITUPDATE section set it sothat the key would be nullAm using Informix 5 , Any help would be apprecia
View 3 Replies View RelatedI need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits.
The mfg_start_date is delcared as a string variable
mfg_start_date = CStr(CDate(Mid(rs_get_msp_info(2), 3, 2) & "/" & Mid(rs_get_msp_info(2), 5, 2) & "/" & Mid(rs_get_msp_info(2), 1, 2)))
option 1
I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
With refresh_shipping_sched
.ActiveConnection = CurrentProject.Connection
.CommandText = "spRefresh_shipping_sched"
.CommandType = adCmdStoredProc
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
.Parameters.Append .CreateParameter("@option", adInteger, adParamInput, 4, update_option)
.Parameters.Append .CreateParameter("@mfg_ord_num", adChar, adParamInput, mfg_ord_num_length, "")
.Parameters.Append .CreateParameter("@mfg_start_date", adChar, adParamInput, 10, "")
Set rs_refresh_shipping_sched = .Execute
End
Please help
Hello,
I would like to display the first non null value from my dataset, is this possible? I am aware of first() and last() but what are my options for displaying the aforementioned? Thanks much!
John
I am using sql server 2012. suppose i have a table called cte which contains id and name columns . in name column there are null value . i want to display top row value instead of null value as like attached image. Here is query :
;with CTE As (
Select 1 as Id , 'Advance' as Name
union all
Select 2 as Id , NULL as Name
union all
Select 3 as Id , NULL as Name
[Code] ...
Expected Result :
I want to write normal select Query. i am not interest to using loop or cursor.
Hello,
I'm facing a problem in my reporting.
I have a Customer table where is record various events like CustomerEventId, DateTime, StatusId, StatusTime, GroupId, ...
I also have a status table (Id, Description) and a group table (Id, Description).
I want to create a report where for a selected date range (From ... To ...) i can see (grouped by date) all status's the customer
went in. The possible status are :
Id Description
-------------------------------------
1 status 1
2 status 2
3 status 3
4 status 4
My query looks something like this :
SELECT CustomerEventId, DateTime, CONVERT(varchar, DateTime), 103) AS DATEVAL, StatusId,
status.description as StatusDescription, StatusTime, GroupId, group.Description as GroupDescription
From Customers inner join status on customers.StatusId = status.id
inner join group on customers.GroupId = group.id
Group By CustomerEventId, DateTime, StatusId, status.description, StatusTime, GroupId, group.Description
My reports has 3 parameters (From date, To date, Group)
In my report i have a table with two groups : GroupByDate (grouped on DATEVAL) and GroupByStatus
now my problem : let's say i have values for statusid 1,2 and 4
then my report will only display those 3 status.
How can i display the status where there is no data for :
now it shows :
DATEVAL Occurrences Time
01/07/2007
Status 1 15 125
Status 2 25 366
Status 4 8 66
I would like it to show:
DATEVAL Occurrences Time
01/07/2007
Status 1 15 125
Status 2 25 366
Status 3 0 0
Status 4 8 66
Anybody (i hope i have provide enough details ...)
Vinnie
Hi,
I have the following problem.
I have created different tables in my database with descriptions in from other tables (example : a table named errors with errorid and errordescription as fields in it)
In a report i want to display the total nr of errors during a certain period for a certain department.
i have created that report with a list (by department). in this list i have a table where i group my errors.
until here all ok. when i display my report it shows all the errors.
but what it doesn't show is all the errors who have value 0 (or errors that didn't occur during that period i defined)
how can i display all my errors, even if they did not occur (0 times)
Greetings
vinnie
I have a table with 3 fields. when I type
select * from test -- I am getting the results as below.
NAME AGE DEPT
AAA 23 AOD
BBB 27 NULL
CCC NULL NULL
DDD 23 POD
DEPT,AGE are displayed with "NULL" WHEN THERE IS NO value for that field . How can I eliminate this. I need space instead of NULL. When I export to text file there also contains NULL. Let me know how can I eliminate this.
Thanks in advance
I have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
Thanks!
I have table in sql server for Employee, it has(id, Employee, director),so the director field is id of the director's name,  so the director is employee and has director also, only the first director hasn't director( one Employee has not director);now, i want to use datagridviewer in c# for display as this table (id, employee, director), so the first record will be the (id, employee, '  ');i use this query:"select emp.ID ,emp.Name ,dir.Name as'director'  from table1 emp, table1 dir where (emp.director=dir.ID OR  dir.director IS NULL)"but when i display the datagridviewer , it don't display the first employee(first director) which hasn't director.
View 6 Replies View RelatedI am stuck on a query where I need to display all the month year values even if the corresponding count_booking values are NULL. The requirement is to display the 13 month year period from current date.
For e.g. if the date exists in the current month then starting from May 15 go all the way back to Apr 14.
My current query works in terms of displaying all the 13 months if the count_booking values exist for all the months. However, if some months are missing the values then those months don't show up.how to display all the months even if the values are NULL ? Query below:
SELECT COUNT(m.BOOKING_ID) AS count_booking, LEFT(DATENAME(MONTH, m.CREATE_DT), 3) + ' ' + RIGHT('00' + CAST(YEAR(m.CREATE_DT) AS VARCHAR), 2)
AS month_name
FROM MG_BOOKING AS m
WHERE (m.CREATE_DT >= DATEADD(m, - 13, GETDATE()))
[code]...
The following is a simplified version of my SQL statement. I am attempting to do a simple count(*) with two groupings and a where clause. This is Select command for a GridView. However, I am unable to display zeros. The rows are completely missing and I would greatly appreciate someone's help. I have already tried Group By All, but that, unfortunately, does not work. Here is my SQL statement:
"SELECT [GENDER], [RACE], COUNT(*) FROM [TABLE] WHERE ([COLUMNNAME] ='SOMETHING') GROUP BY [GENDER], [RACE]"
Thanks for the help in advance!
This is either a bug, or I am crazy.
I have developed a report that pulls its data from an SSAS cube. The report is grouped on Fields!FacilityName. On each "page" of the report, I have information for the displayed facility.
At the top of each page in my report I have a textbox whose value is =Fields!FacilityName. Further down on the report I have another text box whose value is set exactly the same. When I preview the report, I always have a value in the upper box, but only sometimes have a value in the lower box. If I change the value in the lower box to just a text string, it will always display, but when I put in the actual field reference it does not. It always doesn't display for the same facility names. Remember, the upper textbox on the form always displays 100% of the time.
I have a Dundas chart in the middle of the page on the report between these textboxes, but another field that pulls parameters and even a matrix all render correctly below that chart.
They both have the same parent according to the properties. I have even copied and pasted the working textbox further down the screen, with no improvement. When I changed the value of the textbox to "=cstr(len(Fields!FacilityName))", on the pages when it wants to be blank, it reads 0, and on other pages it shows a larger number. But the other textbox on the screen will always properly show the FacilityName.
I have also tried changing the name of the textbox, settings output to YES instead of Auto. If I slide the non-working textbox up to the top of the page and the working textbox down to the bottom area of the page, the bevavior switches.
Does anybody know of rendering issues with textboxes showing the same infomation?
Hi
I have a SQL 2000 table in which pictures are stored as an Image column. I want to display then onto a c# aspx webpage without storing them to disk.
What is the best way to read and display the pictures?
In classic ASP I used to do this:
Response.ContentType = "image/jpeg"
Response.BinaryWrite rs.fields("ThisImage")
but I can't get this to work in c#.
Hello All,
I have the following code:
USE MLS
select sc.name,f.field#,fdesc,flong
from sysobjects so join syscolumns sc
on so.id = sc.id
join fld f
on f.field# = replace(sc.name,'_','')
where so.name = 'dbo.tbl_MLS_Leads_Trans'
I am trying to get the description which is flong and I get the following error message:
Msg 208, Level 16, State 1, Line 2
Invalid object name 'fld'.
What am I doing wrong?
TIA
Kurt
I need to figure out the number of managers without listing them. Label the column Number of Managers.
any help is appricated.
Number of Managers
-------------------------
6
I have one table where i want to use aggregate function for duplicate rows and also be able to select all fields to display. How would i do that?
Here is my query:
select Z, count(*)as num from Table
group by Z
having count(Z) > 1 ----- this returns 213 rows
Select Z, A,B,C,D From Table
Group By Z, A,B,C,D
Having Count(Z)>1 ----This gives me nothing
Hope I am explaining this correctly as to what I want.
Thanks,
Saru Brochu
I have a numeric data field called Price and this has a value of 0.000 in the db. when i create a package to extract this data to a flat file, the value is displayed as .000
what should i do to make it appear as 0.000 in the flat file.
I tried using a derived column expression where i check if the db value is 0.000 and display it as a string "0.000". this works fine if the OLEDB source is a sql command but fails if the OLEDB source is a sql command from variable.
any help would be appreciated.
Thanks.
Hopefully, someone can help me.
I am working with a database that contains multiple fields within the tables that are being used for Clinical notes. The fields are defined as VARCHAR(3500). But when I try to extract data (either through Query Analyzer or Crystal Reports), only the first 256 characters are displayed. I ran a query to give me the length of the maximum entry size which returned 2722 characters, yet only 256 are displayed.
How do I go about extracting ALL of the data from this field? Any help is much appreciated.
Thanks in advance.
In SQL SErver 2008, I have a text column. I need to display either 2nd word in the text column or 1st word in the text column based on certain conditions.
How shall i display either 2nd word or 1st word from a text field.
I have a field that I would like to only display the date as mm/dd/yyyy. Current field shows mm/dd/yyyy hh:mm:ss AM.
View 10 Replies View RelatedI am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID description DisplayOrder Action0 item 1 0 Moveup/move down1 item 2 1 Moveup/move down2 item 3 2 Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark
Hi,
I'm attempting to use the following code to display either 'All' or the date value selected by the user from a Report parameter;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "From Date: " + Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10))
This is throwing an error ('#Error').
I can use the following code with no error, though its not as useful;
=iif(Parameters!FromCheckOutDateDate.Value.ToString = "[Check Out Date].[Date].[All]", "All", "Not all")
I can even use this to display the selected value (i.e. 2007-01-01);
Parameters!FromCheckOutDateDate.Value.ToString.Substring(26,10)
Why can't I use them both in my iif statement?
Can someone please help?
Hi,What's the 'new' declarative way to fetch one field from a SQL table and display the result in a Label control?I have a users table with a fullname field. I want to query the table and retrieve the fullname where the usertable.username = Session("loggedinuser")I can make the SqlDataSource ok that has the correct Select query, but not sure how to bind the label to that.thanks,Bruce
View 4 Replies View Relatedsorry, this is probably a really basic question ..........
is there any way to enable the bit data type in SQL Server to accept nulls?
thanks
nyoobee
Hi all,
I have a table, named systems, with fields as follows.
field datatype
___________________
system varchar(50)
modelID int
.... ....
... .... etc...
The modelID field is related to the Models table. Therefore, the value it expects is a number that already exists in a Models.modelID field.
In the systems table, I allow nulls for the model ID field. If I edit the table directly through SQL front end it allows me to enter a system name for example and leave modelID value as NULL.
My problem occurs when I try inserting into the table from ASP. Whether I leave the value I'm passing to the stored procedure for insert blank or NULL it gives me problems.
Is this a typical issue that can be resolved with a simple property change?
Please help me resolve this, I need to have the ability to leave certain fields empty even though they are related to other tables. Is that possible?
Thank you for any help in advance.
I have a column called person.last_name, and I want to set this field to NULL if person.last_name ='test'///
I have tried this but don't work: ISNULL ({person. last_name},'<>"test'))
May i know how to generate a SQL query to set a field of row to Null? Thank you.
View 2 Replies View RelatedHi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so
this tblFriendUser has a column called UserName and another column
called FriendUserName.
I am trying to get a list of friends for that particular user. Note
that if User1 initiated the friend request, he will be listed as
UserName and his friend as FriendUserName, but if his friend initiated
the friend request, it will be vice versa: him being the FriendUserName
and his friend the UserName. So I want the following 2 queries run and merged into
one query in order to return 2 columns only: UserFriendID & UserName, is that
possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName
FROM tblUserFriends
WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName
FROM tblUserFriends
WHERE (FriendUserName= @UserName);
I need to set a field value based on two date time parameter's.What is the correct syntax to allow me to pass the value into the field in my SSRS expression ?
=IIf(Parameters!EndDate > Parameters!StartDate.Value, "Overdue")
I have a database field which consists of a long string of values with some separator.
Ex:Â Injection^!@$#Medication
in my report i have to split the string as
Injection
Medication
till here i am able to display the results but in addition to that i have to display check box against these values like below
and this string can contain any no of values ex: if we have 4 values are separated within a string then i have to display 4 check boxes against 4 results.
Hello all,
Can some one help me with this issue. It seems to be a common question and I have tried a lot of options but nothing seems to work for me.
I have a text box and this is linked to ajax calendar extender. They get a date and I am inserting/updating the date in a sql 2000 database using a stored procdure.
This is the code I use to grab the data from my web form
If txtTrimsEntryDate.Text = String.Empty Then
_oTrim.TrimsEntryDate = System.Data.SqlTypes.SqlDateTime.Null
Else_oTrim.TrimsEntryDate = CDate(txtTrimsEntryDate.Text)
End If
If txtEstCompletion.Text = String.Empty Then
_oTrim.EstCompletionDate = System.Data.SqlTypes.SqlDateTime.Null
Else_oTrim.EstCompletionDate = CDate(txtEstCompletion.Text)
End If
If txtProjectClosedDate.Text = String.Empty Then
_oTrim.CloseDate = System.Data.SqlTypes.SqlDateTime.Null
Else_oTrim.CloseDate = CDate(txtProjectClosedDate.Text)
End If
_oTrim.InsertOrUpdateAProject()
This is the code for the stored Procedure
Dim oSql As clsSqlServer = Nothing
oSql = New clsSqlServer(AppSettings(_dbName))oSql.AddParameter("@projTrimsEntryDate ", _trimsEntryDate, SQLDataType.SQLDateTime, ParameterDirection.Input)
oSql.AddParameter("@projStartDate", _startDate, SQLDataType.SQLDateTime, ParameterDirection.Input)oSql.AddParameter("@estCompletionDate", _estCompletionDate, SQLDataType.SQLDateTime, ParameterDirection.Input)
oSql.AddParameter("@closeDate", _closeDate, SQLDataType.SQLDateTime, ParameterDirection.Input)
Now when it inserts or updates if the value is null then it inserts "01/01/1900" in the database. I want the value to be Null in database.
Is there a way to do this.
Is there any way of excluding an entire row if a particular field contains a null value? Even if other fields in the row aren't null... This is in SQL Server 2005
View 2 Replies View Related