Want To Get The Order Number Of Each Record
Dec 22, 2006
I want to retrieve data from SQL server database table I also want to get the order number of each record also For example consider the following table I want to get one (1) associated with A, Two (2) associated with B Three (3) associated with E Name Mark A 10 B 9 E 10 How can I do this?
I want to retrieve data from SQL server database table
I want to get the order number of each record also
For example consider the following table
I want to get one
Name Mark
A 10
B 9
E 10
(1) associated with A,
Two (2) associated with B
Three (3) associated with E
How can I do this?
Please help me
hopefully
Sujithukvl
View 2 Replies
ADVERTISEMENT
Sep 24, 2012
In SQL sERVER 2008, I have two fields - Depatment and Employees. I need to sort the result set by employee number ascending order, with following exception
1)when department number = 50 - the preferred order is Employee # - 573 followed by 551-572 (employee # belong to Dept 50 = 551-573)
2)When Department number = 20 – the preferred sort order is Employee # 213-220, followed by Employee # 201-213 (employee # belong to Dept 20 = 201-220)
How shall I achieve this?
View 4 Replies
View Related
Sep 14, 2007
I'm using the Merge transformation to merge two sorted tables on four sort fields.
It all looks OK until several records share some of the same sort fields.
For example if table 1 contains
Zip Code(sort field 1) Cust Name(sf2) Cust Number(sf3) Record type(sf4)
1234 Bob 444 A
1234 Bob 555 A
and table 2 contains
Zip Code Cust Name Cust Number Record type
1234 Bob 444 B
1234 Bob 555 B
then the output order is
Zip Code Cust Name Cust Number Record type
1234 Bob 444 A
1234 Bob 555 A
1234 Bob 444 B
1234 Bob 555 B
and I would have expected
Zip Code Cust Name Cust Number Record type
1234 Bob 444 A
1234 Bob 444 B
1234 Bob 555 A
1234 Bob 555 B
Both input table are explicitly sorted just prior to the merge.
Any ideas?
View 6 Replies
View Related
Jan 24, 2006
I am wanting to set up a trigger on our SQL server 2000 to create a sequential order line number in the OrderDetails table for OrderID.
I will be inserting data from an OrderLinesAdd table into the OrderLines table but want the LineNumber field to be incremented by 1 for each group of orders grouped by OrderID that I insert into the table eg.
OrderID LineNumber
1 - 1
1 - 2
1 - 3
2 - 1
2 - 2
3 - 1
3 - 2
I have just started using SQL so am not sure how I go about writing the code for the trigger ? It would seem like I will need to use the Max function in the code.
Thanking you in advance.
View 3 Replies
View Related
Feb 21, 2014
I am assigning temporary Ids in my table, and right now I am assigning new ones via find the MAX(Temp_Id), stripping out the number and adding one.
Since these are temporary I would like to be able to reuse older ones when they are no longer in the table.
For example I have:
ID0001
ID0002
ID0003
ID0006
My code right now will add ID0007. I would like to re-use ID0004 and ID0005 since they're no longer in use. How do I go about do this?
View 3 Replies
View Related
Apr 30, 2008
I have a table of transaction that includes student ids and dates. I need to select all records from the table and include a new value that is the sequential transaction numbered for each student with the oldest transaction for each student being numbered one, the next oldest numbered two and so on. So the result should look like student1, 10/1/2000, 1, student1, 10/15/2000, 2, student1, 2/12/2001, 3, student2, 9/1/1999, 1, student2 10/2/2000, 2, student2 , 12/15/2000, 3, student2, 11/4/2001, 4 and so on.
View 8 Replies
View Related
Jun 2, 2005
Hello,I am trying to begin a transaction is ASP.NET that acts as a temporary lock on a record so that another web user can not gain access to that row of information. My problem is that when I begin the transaction, if the user then closes out of the browser completely, the temporary lock that is put on my table from the transaction does not go away. Further, I have no idea if it will or if there is a time range you can specifiy to do so.What I am wondering is if anyone has ever tried this before, or does anyone have a definite answer to the following question, "If I begin a transaction, and then I do NOT rollback or committ that transaction, will it ever rollback on its own and if so where can I set this time frame?"Thanks in advance for any help.
View 3 Replies
View Related
Sep 22, 2006
I have a table containing 1000 records. I do have a primary key associated with the table. But I want to get the Record Number of each record. Is there a way to get it. That means for first record it should be 1 and so on and so forth.
View 5 Replies
View Related
Jun 16, 2014
I am working on a query that needs to return the record order number with the most recent requested delivery date.
It seems to work most of the time, but I have found some glitches for some of the items.
example is my item 10702, it is showing 2 records (both valid ones)
Record 1 is order # 10450-0, requested delivery date 03/21/2014
Record 2 is order # 10510-0, requested delivery date 04/29/2014
I need to only get the records with the most recent delivery date, in this example that would be 04/29/2014
This query is what I have so far:
SELECT
s.PriorQuoteNumber
,s.PriorItemNumber
,s.PriorQuoteDate
FROM
(
SELECT
s.SalesQuoteNumberAS 'PriorQuoteNumber'
[code]....
WHERE s.rn = 1What am I missing in my query> how can I change it so it only returns the most recent date?
View 9 Replies
View Related
Mar 15, 2000
This procedure has been returning duplicate numbers. (Tested with scripts that called this proc and put value in a table.)
How can it return duplicates? Does the transaction Begin/Commit not guarantee transactional consistency?
CREATE PROCEDURE sp_UpdateOrderNumber @customer int AS
DECLARE @NewOrderId int,
@nSQLError int,
@nRowCount int
BEGIN TRAN
UPDATE CUSTOMERS
SET ORDER_NUMBER=ORDER_NUMBER + 1
WHERE COMPANY_ID=@customer
SELECT@nSQLError = @@error,
@nRowCount = @@rowcount
If @nSQLError != 0 OR @nRowCount != 1 /* Check for Errors */
Begin
Rollback Tran
Return -999
End
SELECTORDER_NUMBER
FROMCUSTOMERS
WHERECOMPANY_ID=@customer
SELECT@nSQLError = @@error,
@nRowCount = @@rowcount
If @nSQLError != 0 OR @nRowCount != 1 /* Check for Errors */
Begin
Rollback Tran
Return -998
End
COMMIT TRAN
View 1 Replies
View Related
Dec 19, 2014
Sample Data
SET NOCOUNT ON;
USE tempdb;
GO
CREATE TABLE CheckRegistry (
CheckNumber smallint,
[code]...
How can I get the result orderd by the month number?
View 3 Replies
View Related
May 7, 2004
happy friday...
my table has 200,000 + records and I want to see the particular record which I think it is causing the problem.
How could i query 195,203rd record?
thank you, yanoroo
View 8 Replies
View Related
Oct 16, 2007
Hello,
I have a table with a field that contains the record number. This field is an identity column that is needed to be compatible with old Clipper programs. I've to ensure continuity in the numbering. So I have to update those numbers each time one or several records are deleted. I was thinking of using a trigger but I'm quite novice in this domain and don't know how to do it. Does anyone have a solution for this problem ?
Thank you in advance.
Regards,
mathmax
View 20 Replies
View Related
May 22, 2007
Hiwhen inserting records into a table one of the fields is a date field. I am using the GETDATE() function to insert the date as the record is being inserted.when i retrieve an entire record from the table i want to be able to select this date, but also to get the number of days it has been since that record was inserted.eg: 3 daysif the record was inserted less than one day ago (<24 hrs ago) i would like it to return the number of hours. e.g. 22 hrsi dont want hours to be displayed if the days is >= 1.please can anyone guide me with this?thanks!
View 7 Replies
View Related
Oct 29, 2013
I need to create a query that will select only one record out of x number of record per user id.
Sample Data
User ID | Date |Status
001 |10/1/2013 |01
001 |10/2/2013 |A1
002 |1/1/2013 |BB
003 |5/8/2013 |EE
003 |4/2/2013 |BB
Expected Result
User ID | Date |Status
001 | 10/2/2013 |A1
002 | 1/1/2013 |BB
003 | 5/8/2013 |EE
View 3 Replies
View Related
Nov 7, 2013
I am new to SQL Server (coming from Oracle background) and have a large table I need to loop thru and assign a number 1 thru 5 on each record.
below is an example of how I would do it in Oracle.
declare
num number := 1;
cursor c_rec is SELECT rowid, t.* FROM temp t order by t.column;
begin
for d_rec in c_rec
loop
update temp set column = to_char(num)
[Code] ....
View 7 Replies
View Related
Jul 20, 2005
Hi I have a Table with Automatic ID numbers...In access I delete All records by handWhen I add new record with delphi (SQL)the number ID of record count begin with last record+1and not with 0Someone know the statement to reset that?thanx for any help
View 2 Replies
View Related
Oct 20, 2006
Hello.
In SSIS, is it possible to add a record number to each row of data as I copy it from the source to the destination.
An example of my source data is below, For each MemberID want to record the number of times it occurs in the table.
MemberID
2898
2899
2899
What I want it to look like when it gets to the destination is:
MemberID RecordNumber
2898 1
2899 1
2899 2
Like an Identity column I suppose, not for the whole table but for each MemberID.
Thanks
View 15 Replies
View Related
Jan 20, 2015
We are having trouble figuring out how to create a view for this scenario:
We have a status log table that holds an order number, statusdatetime, and statuscode. This table will have multiple status' for the same order number. I want to create a view that will give me the most current status (by statusdatetime) of each order number. This view would show: order number, statusdatetime, and statuscode.
Here is a sample of the data:
Order numberStatusDateTimeStatusCode
1234512/15/2014 15:00CREATE
1234512/15/2014 16:30CONFIRMED
4567812/16/2014 08:00CREATE
9876412/18/2014 12:00CREATE
9876412/19/2014 08:00CONFIRMED
4567812/17/2014 09:30CONFIRMED
4567812/19/2014 15:30IN-TRANSIT
So my view should result in :
Order numberStatusDateTimeStatusCode
1234512/15/2014 16:30CONFIRMED
9876412/19/2014 08:00CONFIRMED
4567812/19/2014 15:30IN-TRANSIT
View 4 Replies
View Related
Oct 20, 2006
I have datagrid that needs to display a log table which has more than million records. Since it it huge number, it is not possible to get dataset using "select * from log_table" to fill and to bind to datagrid.Is there anyway to display first 100 rows on first page and show next 100 rows if use clicks on page 2?Thank you very much in advance!Justin
View 4 Replies
View Related
Apr 24, 2008
I€™m working on a database project that will ultimately contain millions of records for each lot. In addition, each lot will have up to 96 corresponding serial number records.
I would like to add a SQL parameter that would tell the database engine to only return X number of records.
For Example:
If table TBL_LOTS contains one million records I would like to limit the return set to 100 for example.
What would I need to add to the SQL command to below to restrict the data set to the first 100 records in the set of one million?
SELECT [LOT NUMBER]
FROM TBL_LOTS
WHERE [STATMENTS]
View 3 Replies
View Related
Mar 21, 2008
Do anybody know how can I find or display to the current SQL server 2005 record number (eg. 10 of 1600) on a VB 2005 form label. The BindingNavigator on the form has been deleted. Thanks.
View 6 Replies
View Related
Nov 17, 2015
I need to assign a random number between 0 and 1 to all eligible cases of cancer.Â
I have a file of records like:
patientid
tumid
site
How can I assign a random number to each record?
View 10 Replies
View Related
Aug 27, 2007
can someone pls show me a way to get an unique sequence at below senario:
PC1 & PC2 using their own local client progam to access to Database Server at SERVER1.
In the SERVER1, there is a table SEQUENCE in a database DATABASE1.
And the table's structure of SEQUENCE are SeqType & SeqNo.
Here is the sample data:
SeqType SeqNo
Invoice 100
DeliveryOrder 200
Now, how to prevent PC1 & PC2 to get a same Invoice No. if they request the Invoice No. at the same time?
Is it possible to lock the record Invoice when i perform a SELECT statement, then i update the Invoice to 101, lastly release the lock for Invoice?
pls advise. thanks.
View 1 Replies
View Related
Jan 8, 2008
Can anyone help me figure out how to set up a new table using SSIS with a record field that will generate a unique number? The record number is also the primary key in the table. I did this about a year ago with a bit of help, but once you get the language right and initiate the creation, the text for defining the table is no longer available. I have seen a lot of references for MySQL and MS SQL 2000 and an AUTO_Generate or a UNIQUE ID. None of this works within MS SQL 2005 in SSIS.
Thanks!
Jim
View 8 Replies
View Related
Nov 26, 2013
I have sql code that returns the correct number of record when run without an aggregate function like count(myfield) and group by myfield. It always returns 86 row which is correct when Select DISTINCT is used. As, expected when DISTINCT is not used I get double the number if rows or 172. But when I count(myfield) and group by myfield the count is 172 and not 86. The strangest thing about this is that when I am grouping a set of items
Group 1
Group 2
Group 3
The other group sum up correctly while others don't. What can explain this? Here is the code.
Select DISTINCT ws.p4Districtnumber, ws.cycle, ws.worksetid, count(msi.MeterSessionInputKey) as ASND
from fcs.dbo.WorkSet as ws
left outer join fcs.dbo.WorkAssignment as wa
on ws.WorkSetID = wa.WorkSetID
left outer join fcs.dbo.MeterSessionInput as msi
on wa.worksetkey = msi.worksetkey
[code]....
View 3 Replies
View Related
Jun 12, 2006
hi all,
maybe this is not a serious problem, but I tried for days to come toi a solution without success.
My Problem:
I have have several flatfile sources I need to import into a sql-server 2005 DB.
It is very important for me to have the original line number from inside the source file for each record. The rowcount transform doesn't fit in for this task, because it accumulates all rows until the end of the dataflow.
I tried script components and it works fine if i assume there are no errors in my source. then I simply could declare a local variable and count it up and add a custom collumn to my output. But for errors in my source this won't work, because a second script component won't know the actual value of a package level variable, which i use to store the value, because i am only allowed to access this variable in the post execujte method of the script.
How can I achieve my goal? Please help me...
Thanks in advance .. Bernd
View 11 Replies
View Related
Sep 30, 2015
I work for an organization that repairs serialized devices. Each time a device is repaired it's serial number is recorded in a database table along with the date it was repaired along with other information about the device. There are multiple cases where a unit has been repaired more than once.
I am trying to write a query that will return the serial only once and that record will be the record of the latest repair date. To sum it up,
Return a list of serials where if a serial exists more than once in the table, return only the instance of the serial record(s) with the max(created_dt). The end result will be a list of distinct serial numbers.
Here is my Query. The problem I believe is in my sub-query but I am not sure how to structure it.
SELECT
S.Id
, RMA
, PinSerial
, L4Serial
, L4Model
[Code] ....
View 3 Replies
View Related
Aug 31, 2007
I get this error when I look at the state of my SQLresults object. Have I coded something wrong?Item = In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. conn.Open()
Dim strSql As String
strSql = "INSERT INTO contacts (companyId, sourceId, firstName, lastName, middleName, birthday, dateCreated)" _
& "VALUES ('" & companyId & "', '" & sourceId & "', '" & firstName & "', '" & lastName & "', '" & middleName & "', '" & birthday & "', '" & now & "') SELECT @@IDENTITY AS 'contactId'"
Dim objCmd As SqlCommand
objCmd = New SqlCommand(strSql, conn)
Dim aSyncResult As IAsyncResult = objCmd.BeginExecuteReader()
If aSyncResult.AsyncWaitHandle.WaitOne() = True Then
Dim sqlResults As SqlClient.SqlDataReader
sqlResults = objCmd.EndExecuteReader(aSyncResult)
Dim cid As Integer
cid = sqlResults.Item("contactId")
Me.id = cid
conn.Close()
Return cid
Else
Return "failed"
End If
View 3 Replies
View Related
Jan 7, 2007
Finding the "pieces of information" I need to successfully install the SQL Server Express edition is so complex. Uninstalls do "not" really uninstall completely, leading to failure of SQL install. Can you suggest a thorough, one-stop site for directions for the order of app uninstalls and then the order for app installs for the following...
SQL Server Express edition
Visual Studios 2005
Jet 4.0 newest upgrade
.Net Framework 2.0 (or should I use 3.0)
VS2005 Security upgrade
Anything else I need for just creating a database for my VS2005 Visual Basic project?
I was trying to use MS Access as my backend db but would like to try SQL Express
Thank you, Mark
View 7 Replies
View Related
May 19, 2015
I never paid much attention to this before but I noticed this today in a new table I was creating.
For tables defined in the tabular model the table properties have something like SELECT Blah FROM TableName ORDER BY Blah Then in the tabular model the table's data is in the same order it was ordered by in the data source for the table.
I have a date table I setup and I noticed it is NOT respecting the sort order.
I have it sorted by DateID which sorts with the oldest date first and newest date as last row.However, the table that is imported and stored in the data model is not in that order.
I can of course manually sort the rows in BIDS/DataTools, but I find this discrepancy odd.
Would this have negative impacts on the EARLIER function for example if the data rows are not in the order specified?
View 8 Replies
View Related
Apr 10, 2014
I have a query that calculate the total amount of order details based on a particular order:
Select a.OrderID,SUM(UnitPrice*Quantity-Discount)
From [Order Details]
Inner Join Orders a
On a.OrderID=[Order Details].OrderID
Group by a.OrderID
My question is what if I wanted to create a formula to something like:
UnitPrice * Quantity - DiscountAmount Where DiscountAmount = UnitPrice Quantity * Discount
Do I need to create a function for that? Also is it possible to have m y query as a table variable?
View 7 Replies
View Related
Mar 27, 2008
Hi!
I recently run into a senario when a procedure quiered a table without a order by clause. Luckily it retrived data in the prefered order.
The table returns the data in the same order in SQL Manager "Open Table"
So I started to wonder what deterimins the sort order when there is no order by clause ?
I researched this for a bit but found no straight answers. My table has no PK, but an identiy column.
Peace.
/P
View 5 Replies
View Related
