Weighted Search On Fulltext Index
Aug 20, 2007
SQL Server 2005:
Anyone know how best to rewrite this SQL string to perform a weighted search on my table?
here's my code:
SQL="SELECT RecipeName FROM recipeList WHERE FREETEXT(*,'ISABOUT " & ing01 & " WEIGHT (.1) or " & ing02 & " WEIGHT (.2) or " & ing03 & " WEIGHT (.3) or " & ing04 & " WEIGHT (.4) or " & ing05 & " WEIGHT (.5)')"
the idea is to get a list of recipes most pertinant to the ingredients entered.
table 'recipeList' contains the ingredients in several columns. so column 2 might say '5oz of flour', column 2 - '2oz butter' etc.
at the moment it returns the correct recipes but not in the right order.
If I use 'CONTAINS' it returns nothing.
hope that's not too vague!
View 10 Replies
ADVERTISEMENT
Jun 4, 2015
I am using SSIS to replace set of tables daily. One of the table has primary, unique, foreign keys and full-text index. Before truncating, I am dropping the foreign key constraints (to truncate the parent table), truncating the tables and recreating the foreign keys.
I have few questions:
1) Do I need to drop and recreate the unique key as well? (I am not dropping the primary key) - Unique key is identity column created just for the full-text indexing since it was mentioned that key on integer is better than key on varchar and my pk is a varchar.
2) Do I need to drop and recreate the full-text index or just rebuild/repopulate it every time the table is loaded.
This is the first time i am using full text index and I was able to learn a lot about it from the sites. I would like to understand the correct approach while loading the tables.
View 4 Replies
View Related
Aug 6, 2012
We have a table that is Full Text Search index enabled on one column.This table has 200 lakhs of rows(20000000) . ContainsTable() function is searching data with in these 200 lakhs of rows(20000000), if any new rows are inserted then the ContainsTable is not going to search in these recent inserted rows.
We observed when we try for a data to search. it is returning the rows till the rows that are inserted date is less than 30th of march 2012. but not searching in the records that are created after April month , if even the data we are searching is available .
TableFulltextItemCount is around 2.2 crores.
Then we done rebuilt the FT catalog Index. then the TableFulltextItemCount became 0.Again we run the containstable query ,but still it is not getting results.
As the no of rows are very more . so i am not able to show the actual rows from which the data is not coming.
the below query gives 2 results that are from actual base table
HTML Code:
select * from g_case_action_log where cas_details like '%235355%' and product_id = 38810
To search for the same above word using FTS,I have used the query as below
HTML Code:
SELECT Distinct top 50 cal.case_id,cal.cas_details From g_case_action_log cal (READUNCOMMITTED)inner join containstable(es.g_case_action_log, cas_details, ' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key] Where cal.product_id = 38810 ORDER By cal.case_id DESC
I have attached one sql script file for your ref that contains create logic and index schema properties
Why it is not returning results all the time.
View 1 Replies
View Related
Oct 5, 2006
I have to perform a weighted search. I have 2 criteria and each will be weighted on a 100 sum(e.g 25/75, 50/50). I am just wondering if there is an easy way to encompass a weighted value on SELECTS. Sorry if this is a dumb question. Thanks,Kyle
View 1 Replies
View Related
Mar 25, 2015
I have a table that contains words that will be used to search another table where FullText index has been created on searchable columns. I'm basically trying to run something like this:
SELECT t1.col1, t2.col3
FROM tbl1 t1, tbl2 t2
WHERE CONTAINS (t1.col1, t2.col1)
I know this won't work but is there a way to join these two tables so the words (t2.col1) can be passed as search conditions? There is no common key on both tables so normal join won't work. I'm trying to find a way to pass the search words from one table to another.
View 0 Replies
View Related
Dec 6, 2011
My site uses a text box to allow visitors to search products. I'm trying to design the SQL Statement to allow search's on full words, part words, and words/phrases regardless of the order the words are in.
E.g.
megger
meg
mft megger (proper order in the database is megger mft)
mft1710 (using 1710 should find the product)
This is my select statement (classic ASP)
Code:
<%
Dim RSResults__param5
RSResults__param5 = "xxx"
If (Request("searchme") <> "") Then
RSResults__param5 = Request("searchme")
End If
[Code] ....
View 1 Replies
View Related
Apr 12, 2004
I have create a table called tblcatalog with colums id(identity,primary key) and contents(varchar(100))
I have then created a full text catalog on that table and populated it.
Then i wrote the following query
"select contents from tblcatalog where contains(contents,'sample data')"
It is fetching 0 records even though u have 5 records with entries "sample data"
Can anyone tell me the solution immediately
bye
shanky
View 3 Replies
View Related
Jul 23, 2005
Apologies if this is not the correct place to put this.I wrote this query to perform a fulltext search on tblPages.SELECT * FROM tblPages,FREETEXTTABLE(tblPages, *,@searchTerm) searchTableWHERE [KEY] = tblPages.PageID ORDER BY RANK DESCWhere PageID is the primary key.The synax is correct but why does it never return any results?thanksmarc
View 2 Replies
View Related
Jun 20, 2008
Hi,
I created the following table in which i created full text indexing for DocDatafld and TypeColumn was used as Type Column for DocDataFld field. I store Document name in the DocumentTitlefld and want to get the Document name and Document and want to display it in the front end application and give url for the document.
Documentidfld bigint
Documenttitlefld varchar
MimeTypefld varchar
DocDatafld varbinary(MAX)
TypeColumn varchar
and i am using the following query to get the contents, but not able to get the column values.
select documenttitlefld,docdatafld from Documentdatatbl Freetext(DocDatafld,'C')
Please help
View 2 Replies
View Related
Jan 14, 2008
Hi,
I'm trying to do a fulltext search which returns the adjacent words also in the result, like u do a google search and it returns the paragraph containing the searched phrase.
Any tips ?
View 1 Replies
View Related
Mar 31, 2007
I am Using a Full Text Search Engine to Search Members of My Site so getting a Problem in Paging Concept I Basically want FullText Search Should Return me the Row he has Found I Dont want to write a new Query to get total resulset
Please can anyone Help Me
View 1 Replies
View Related
Jul 22, 2007
I had problem when change database from sqlserver 2000 to sql express 2005.The fulltext index does not create automatically.Example: i use sqldatasource to insert new name to my table.and then i find it by query like this : select count(*) from mytable where contains(mycol,'newname')the result is 0but if i run query to start full index : exec sp_fulltext_catalog 'myfulltext','start_full' and run query select count(*) from mytable where contains(mycol,'newname')again. The result is 1. So i alway run exec sp_fulltext_catalog 'myfulltext','start_full' after insert or update, delete to create fulltext index. When i use sql server 2000 , i didn't need do that, it automatic. Pls help me !!! how to make fulltext index create auto in sql express 2005 .
View 1 Replies
View Related
Sep 25, 2013
I'm using full text search in sql server 2008 with contain keyword.
My issue is while I'm trying
select * from tbl_item_master where contains (ITM_FULLTEXT,'red and white')
above syntax gives me required output but while I'm trying
select * from tbl_item_master where contains (ITM_FULLTEXT,'red and the and white')
above syntax does not gives me output. I'm using system stop list and "the" is noise keyword.
I want to stop searching "the" but want result as per first syntax.
I do get warning " The full-text search condition contained noise word(s)."
Is it possible?
View 1 Replies
View Related
Mar 9, 2007
Hello,
I try to get the full-text search on SQL Server Express with advanced Services SP2
running, but I got some problems.
First I tell you what I did.
I created a new database called TestDB.
Then I created a TestTable inside the db with a Primary Key:
CREATE TABLE [dbo].[TestTable](
[id] [int] IDENTITY(1,1) NOT NULL,
[text] [ntext] COLLATE Latin1_General_CI_AS NULL,
CONSTRAINT [PK_TestTable] PRIMARY KEY CLUSTERED
(
[id] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
Then I executed these commands:
sp_fulltext_database enable
create fulltext catalog testcatalog as default
create fulltext index on TestTable(text) key index PK_TestTable
Now the problem:
When I insert some rows in the Table the catalog get not populated.
(change Tracking Setting is set to auto)
Instead these error messages are written into the crawl log:
Error '0x80004005' occurred during full-text index population for table or indexed view
'[TestDB].[dbo].[TestTable]' (table or indexed view ID '2073058421', database ID '5'),
full-text key value 0x00000002. Attempt will be made to reindex it.
The component 'sqlfth90.dll' reported error while indexing.
Component path 'c:ProgrammeMicrosoft SQL Server90COMsqlfth90.dll'.
Can somebody give me a hint?
Greetings,
Phillip
View 2 Replies
View Related
Dec 11, 2007
I just implemented full text search on a table and it doesn't work like I expected. I am using a stored procedure to search a company name column.
CREATE PROCEDURE swsp_GetCompanyRecord
@companyName varchar(120)
as
begin
select recID, companyName
from TABLE
where contains (companyName, @companyName)
end
I use the stored procedure as follows:
swsp_GetCompanyRecord '"Reynolds Aluminum"' (Quotation marks inside single quote)
If I search for a company (e.g., Reynolds Aluminum), I get the following results:
Search Returns
Reynolds Reynolds Aluminum
Reynolds A Reynolds Aluminum
Reynolds Al nothing
Reynold nothing
Aluminum Reynolds Aluminum
I guess I expected this to work similar to 'LIKE' in that it would return the full company name if I gave it any portion of the name. Is there something wrong with the way I've implemented this?
View 1 Replies
View Related
May 7, 2007
Hello all
I am trying to full text search in the Documnt table in AdvantureWorks DB.
as in the video sample microsoft provided.
I create the unique index on DocumentID column and created the FullTextIndex:
create fulltext index on Production.Document
(
Document
Type column FileExtension
Language 0X0
)
Key index ui_ProductionDocument on MyFullTextCatalog
With change_tracking auto
Now I am trying to run the next search:
select * from Production.Document
where Contains(Document,'קורות')
and I get nothing back, what do I do wrong?????
View 3 Replies
View Related
Sep 1, 2007
Hi All,
I am using SQL SERVER 2005 Express. I am trying to set up CREATE FULLTEXT INDEX.
I have confirmed that the Fulltext is installed with:
SELECT
fulltextserviceproperty('IsFulltextInstalled')
So no I need to create a Full Text index:
CREATE FULLTEXT INDEX
ON E190MELCDL(xmldata)
KEY INDEX PK_E190MELCDL
But I get this error:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
Any Ideas?
Thanks,
Bones
View 7 Replies
View Related
Jan 15, 2007
I've got fresh Installed SQLExpress 2005 Adv. with a following:
WinXP Pro, Developer PC, Admin/Full rights, Antivirus PC-Cilin was switched off for the installation.Enable User Instance - 0 (clear check box during installation)SQL Collation: Dictionary order case sensetive for1252 Char setSELECT @@language: us_englishcreate fulltext catalog testAPFullTextcatalog,
Sp_help_FullText_catalogs: 5 testAPFullTextcatalog C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFTData estAPFullTextcatalog 0 0create unique index indexName_Comment on dbo.FullTextSearchTestTable(RecordID)
sp_configure:
allow updates 0 1 0 0
clr enabled 0 1 0 0
cross db ownership chaining 0 1 0 0
default language 0 9999 0 0
max text repl size (B) 0 2147483647 65536 65536
nested triggers 0 1 1 1
remote access 0 1 1 1
remote admin connections 0 1 0 0
remote login timeout (s) 0 2147483647 20 20
remote proc trans 0 1 0 0
remote query timeout (s) 0 2147483647 600 600
server trigger recursion 0 1 1 1
show advanced options 0 1 0 0
user instances enabled 0 1 0 0
user options 0 32767 0 0CREATE FULLTEXT INDEX ON dbo.FullTextSearchTestTable(Comment)
KEY INDEX indexName_Comment ON testAPFullTextcatalog
WITH CHANGE_TRACKING AUTO
Result:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1Default full-text index language is not a language supported by full-text search.
I couldn't overcome the issue. Please help.
Alexei
P.S. May be Important: During installation (on Management Studio Express installation stage) a had to click twice the "Ignore" button for the following popUp message:
"Could not write value to key:
SoftwareClasses.xdropenWithProgIdsShared - verify, if you have sufficient access to hot key or contact your support.
View 10 Replies
View Related
May 1, 2007
I'm about ready to smash my computer. I've installed SQL Server 2005 Express Edition with Advanced Services on Win XP Pro SP2. I made sure to enable the Fulltext service at install. Installed to the default instance name, and made sure the fulltext service is running from the CM. I made sure to enable full text indexing on my database from the properties window. I can create the fulltext catalog, but not the index!
----
create fulltext index on [person.contact] (Lastname)
key index [PK_Person.Contact] on myfulltextcatalog
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
----------------------------------------------
select * from sys.fulltext_catalogs
returns the catalog
----------------------------------------------
sp_fulltext_service 'update_languages'
Informational: No full-text supported languages found.
----------------------------------------------
select @@language
us_english
----------------------------------------------
select * from sys.fulltext_languages
Returns an empty table
----------------------------------------------
SELECT * FROM sys.configurations
ORDER BY name ;
1126 default full-text language 1033 0 2147483647 1033 default full-text language 1 1
----------------------------------------------
Does anyone have any idea what's going on? I've already removed and re-installed a couple of times to different directories, used different instance names, and still no luck. Any help would be greatly appreciated.
Mike
View 6 Replies
View Related
Oct 30, 2007
Hello all,I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :SELECT ci.itemNameFROM Content_Items ciINNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemIdINNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :A unique column must be defined on this table/view.How do I create a unique column within a view?Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
View 1 Replies
View Related
Dec 5, 2007
Hello,
i have a database with about 300.000 entries. The database gets about 30 new entries every day. The Database has an FulltextIndex on several columns. This FulltextIndex will be updated every night.
But now i have found out, that the fulltextsearch doesn't work anymore for all entries that where added after April 2006.
When i for example make following sql-statementSELECT id,date FROM MyTable WHERE (CONTAINS((columnA),' "mykeyword" '))
i only get results that have a date after April 2006 (although there are matching entries after that date).
What can the reason for that be?
According to Management Studio the last Update of the FulltextCatalog has been made on 1st of December 2007. Everything looks normal and I didn't find any logs that are saying that there has been any errors.
Where do I have to look to be sure if the FullTextIndex does work?
Specs:
SQL Server 2005
Microsoft SQL Server Management Studio 9.00.1399.00Microsoft Analysis Services-Clienttools 2005.090.1399.00Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)Microsoft MSXML 2.6 3.0 6.0 Microsoft Internet Explorer 6.0.3790.3959Microsoft .NET Framework 2.0.50727.832Operating System 5.2.3790
greetings
Klaus
View 3 Replies
View Related
Oct 30, 2007
Hello all,
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName
FROM Content_Items ci
INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId
INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :
A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
View 1 Replies
View Related
Mar 29, 2008
I just tried to backup a database I recently deployed to to SQL Server 2005 box, and got the following error:
The backup of full-text catalog 'myCatalog' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online.
Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data.
I don't need the index so I tried to drop it with both:
DROP fulltext catalog 'myCatalog'
and
DROP catalog 'myCatalog'
but both give me a syntax error.
How can I get rid of this index so I can backup my database?
Thanks,
Tristan
View 2 Replies
View Related
Oct 5, 2007
We are designing a scenario in which we will have a central publisher and several subscribers in a server to server environment using Merge replication. We also will have a fulltext index for one of the tables being replicated and synchronized. What are your recommendations for the index? Would auto change tracking reduce the impact? We are building for a possible 1 billion row table but do not anticipate more than 100K rows at any time of replication.
Thanks,
Sally
View 4 Replies
View Related
Oct 30, 2007
Hello all,
I'm wanting to do a CONTAINS query on fields that belong to two seperate tables. So, for example, this is what I'd *like* to do :
SELECT ci.itemName
FROM Content_Items ci
INNER JOIN Content_Pages AS cp ON ci.contentItemId = cp.contentItemId
INNER JOIN FREETEXTTABLE(Content_Items, (ci.title, cp.pageText), @searchString) AS ft ON ci.contentItemId = ft.[KEY]
However, this will not work, since SQL Server won't let you do fulltext queries against more then one table.
So my idea is to create a view that combines my Content_Items table with the desired column from my Content_Pages table. I would then create a fulltext index on this view, and do fulltext queries against it.
It seems like this should work. However, when I try to create a fulltext index on my newly-created view, I get this error :
A unique column must be defined on this table/view.
How do I create a unique column within a view?
Also, will my approach work, or will it have unintended consequences? I'm using this as part of a search component in my software, so it has to perform reasonably well.
View 7 Replies
View Related
Aug 16, 2007
Hello,I am using SQLServer Express and Visual Studio 2005 to create the website. I would like to implement FullText search, but have never done it before. I have looked at the msdn documentation on FullText search in SQLServer 2005 here http://msdn2.microsoft.com/en-us/library/ms142519.aspx.I cannot seem to figure out how to use a FT search using Visual Studio. Can someone please help me configure my database and then explain how I can run queries based on user input to return data?
View 5 Replies
View Related
Oct 7, 2004
Our production DBs are SQL Server 2000(Enterprise Edition) on Windows2003.
Can anybody tell me how can I check whether a table has a FullText Index or not?
Thank you!
View 1 Replies
View Related
Mar 27, 2007
I am running a DB with 250Gb of documents, the fulltext index just keeps growing and growing. The files in the MssearchCatalogDir folder is currently taking up 106Gb, it was only 74Gb this morning. The full text catalog size property says its only 53.6Gb and this is remaining steady while the files in the MssearchCatalogDir folder seem to be balloning out of control. I ran a reorg on the fulltext catalog and it did not alter the file space (actually increased it).
There is one *.ci file that is doing most of the growing, its about three times as big as the second biggest one and is expanding before my eyes.
Should I have turned population off when I did the reorg?
Manamgement studio has an Optimize catalog option on the fulltext catalog properties dialog, is this different from a fulltext catalog reorg? Should I run this.
Should I run a shrink file on the filegroup containing the fulltext catalog (the filegroup itself is very small, all the space is in the MssearchCatalogDir folder)?
I have 140Gb left on this drive, is it just going to keep on expanding until I'm out of room, I just dont know what I should do.
Abit more info.....
I was rebuilding the index from scratch (needed to move it to another filegroup).
When I first started the rebuild, msftesql.exe and msftefd.exe were both taking alot of cpu and the overall cpu usage was high. Now after 12 hours, only msftesql.exe is running and is taking up 5-10% cpu. Could it be that the rebuild is not complete yet? Although the Item Count property of the full text catalog does seem to indicate that all documents have been processed, the processes keeps running and disk space keeps going down.
View 1 Replies
View Related
Mar 25, 2008
Sorry, is this possible?
select * from COLLABORATOR x inner join
containstable
(CollaborAtor,*,
' ISABOUT (
"hiv and Gender" weight (.8)
or
"hiv or Gender" weight (.2)
)
'
)
as KEY_TBL
on x.ColId = KEY_TBL.[KEY]
==
basically I want all rows with either string, but I want those with both to rank first.
Also, how can I deal with singular vs plurals of words..
Thanks.
View 1 Replies
View Related
Mar 27, 2008
Hi,
I have a problem restoring a Read-Only filegroup in a database.
I've restored the Read/Write filegroups first without any problem.
Then, I am able to recover Read-Only filegroups which do not contain fulltext indexes with the command :
RESTORE DATABASE GSM FILEGROUP = 'FG_RO_20080214' WITH RECOVERY
However, for filegroups containing FullText indexes (Fulltext indexes are in the same filegroup as data used for this index), I always get the following error :
Server: Msg 3149, Level 16, State 6, Line 1
The file or filegroup "sysft_CAT_SM_20080127" is not in a valid state for the "Recover Data Only" option to be used. Only secondary files in the OFFLINE or RECOVERY_PENDING state can be processed.
Server: Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
If I'm looking at sys.database_files catalog view, I can see the following
name type_desc state_desc
------------------------ ----------- -----------------
sysft_CAT_MS_20080127 FULLTEXT RECOVERY_PENDING
Does anyone have an idea, please.
Thanks in advance
Patrick
View 2 Replies
View Related
Jul 30, 2007
For demonstration I created a fulltext index on table employee in Northwind database.
The following query gives an error:
SELECT * FROM employees
WHERE CONTAINS (FirstName, 'Barbe')
Replacing 'Barbe' by 'Barb' or other words it works fine.
The error message is (I have a french version of SQL installed, here the translation: "A clause in the query contains only ignored words"
Une clause de la requête ne contient que des mots ignorés)
Language for wordbreak in fulltext index is French and the error happens only with French, with English it works.
Is this a Microsoft bug?
View 1 Replies
View Related
Jul 30, 2007
How can i enable my fulltex change-tracking and update-index in my table?
I recreated my fulltext catalog and start the full population, but although my fulltext index status shows active, my full-text change-tracking and the update index were disabled. - and I don't know how to enable them.
Thanks in advance
View 3 Replies
View Related
Apr 12, 2007
Hello..
When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found.
Informational: No full-text supported languages found.
Msg 7680, Level 16, State 1, Line 1
Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly.
What I have to do?
View 2 Replies
View Related
