I see that a .rds file was created as a result of me defining a shared data source. So are they meant to be shared across projects only within the same solution, across solutions perhaps with references, system wide etc?
View 1 RepliesI experimented a strange behavior using connections for data source inside packages in vss 2005.
Suppose we have a tab1 in a develpment source db and in a test source db:
tab1 dev db contains 100 records
tab 2 test db contains 200 records
I start developing a package using an 'ole db data source' task inside a data flow. When I change the data source from dev to test, strange thinks happens.
The 'ole db source task' retrieve only 197 records ... but if I open the connection inside the connection manager pane and only after i click on the 'test connection' button tI get 200 records.
The source db is a sql 2000 db server and I use ole db provider for sql server.
Cosimo
How can i get the shared data sources i created in the report manager to be available in VS.net to be able to assign to a report. I want to be able to create the shared data source first in Report manager and then be able to assign it a report in VS.Net
Thanks.
Was wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
I have an archive of an Analysis Services database that was created on a server that is not accessible to me. I also have a copy of the source SQL Server database that it uses as a data source. I have restored both of these to my server. I have figured out how to change the data source to point to my server for the fact tables referenced, but I can't figure out how change the data source for the shared dimensions. I would like to be able to do work on this version of the database, but I get errors when I try to browse the dimension data because it can't connect to the original data source. Any ideas?
View 6 Replies View RelatedI'm trying to use stored credentials to enable caching. I've created a special windows user account with minimum permissions for just this task, and once set up, it works great (almost).
I can update the shared data source using SQL Mgt Studio or directly via the Report Manager to use a set of -windows- stored credentials. But I don't seem to be able to do the same via VS.NET 2005. I can only store -SQL- credentials, which I have no need to enable and no desire to add to my surface area.
The problem lies that every time I deploy any report that using that data source (which is nearly all of them), the data source is re-published, which wipes out the stored credentials and caching immediately stops.
I've tried messing with the XML directly, with no luck, and changing assorted advanced settings, but nothing seems to stick.
Obviously I can manually update the credentials each time I deploy something, but surely it seems that there must be a better way. Is there a way to either set the DS to use stored windows credentials, or just plain prevent the deployment of the DS every time a dependent report is published?
Suggestions?
Geof
P.S. SQL 2005 Standard Ed SP1 32-bit
Hi all,
I have several reports using single shared datasource. I want to change at a runtime database that is used by that datasource. Can this be achieved? If not what are the other solutions €“ I guess that using not shared datasource for each report may be the solution (is it?) but it is not the best solution for me. My goal is to allow users to run the same set of reports, viewed in ReportViewer control, but using different databases (connection string dependant).
Thanks in advance for any suggestions
I created the shared data source and the report in VS 2005. After deploying the report to the Report server and trying to access it produces the following error.
An error has occurred during report processing.
Cannot create a connection to data source 'kv_testQA'.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I checked to see if the Data source exists in the Report Server and it does. But it still produces the error. What is the issue here.
Thanks for the help.
First off, let me just say that I'm a complete newbie to SQL Reporting Services, and .NET in general. We have a VB 6 application that is trying to launch an SRS 2005 report in a viewer window. This was accomplished by creating A VB.NET "wrapper" window that launches the report, and allows the report to be previewed, exported, etc. I did not write any of this.
The report is using a Shared Data Source, which points to a specific database. My problem is that the users can select which db they want when they launch the VB 6 Application, so I need to find a way to edit the connection string in the report to specify which database to use on the fly. I have the db name in the "wrapper" application, but I can't figure out how to pass it to the report.
thx,
Paul
I'm using a shared data source to connect an Oracle server in my packages. After changing the database user password in the shared data source, I noticed the package concerned would fail with the following description.
Source: "OraOLEDB"Â Hresult: 0x80004005Â Description: "ORA-01017: invalid username/password; logon denied".
Is there a way to ensure the packages will use the latest information in the shared data source? I did do a Rebuild before executing the packages.
Could we use SSRS Shared Dataset as a source to the SSIS package?
View 3 Replies View Relatedhi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
Hi guys how are you doing? I was wondering how should I set the values in these two variables without making the select, I mean just set, I think that if I select two times it takes much longer is that true?
declare @user_id int, @creation datetime
select @user_id = user_id, @creation = creation from solarUsers
Select @user_id, @creation
Thank you very much =D.
Hello everyone, I have created my web application in VS 2005 using asp.net 2.0 and the built in sql .mdf database creater that comes with visual studio. After I developed my website, I then wanted to move it to one of our servers on the network, which I did without a problem. The website works fine but here is my challange. I need users to be able to connect to the database via login script and the script inserts computer data into the database. So I figured I need to attach the Database to SQL Server 2005. When I try to do this it gives me this database is in use. So I stop the website in IIS, and it allows me to add the database into the SQL Server. Once I do this, and start the website again, the website no longer works and I get a bunch of database errors, that do not get fixed untill I re-copy the website to the server.
Is there a way to just connect to a .mdf file on the network that is not attached to a sql server, through a connection string in a login script? Maybe there is something else I need to do to the database before copying to the server? Or should I re-programm the website with a newly created database in SQL Server, and use that as the datasource?
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
Hi Friends,
me again. I am trying to find out if all of my intended foreign keys are actually set as foreign keys programmatically.
Ive stuffed something up, please find my error
USE RIQDB1
SELECT DISTINCT 'Alter table '+ table_name +
' ADD CONSTRAINT DF_'+ table_name + '_' + column_name +
' DEFAULT ' + ''''' FOR '+ column_name FROM Information_schema.columns
WHERE ((column_name Like '%fk%') AND (FROM Information_schema.type = F))
go
thanks
Cm
...anywhere in the folder structure a person must be set up as a Content Manager at the Reporting Services ROOT (and at every level of the folder hierarchy down to the level that they are moving/renaming)?
Sure, you can remove them from the role in other folders where they should not be moving or renaming objects, but it seems you still have to have them at the root (and down the chain), which gives them far more capabilities than you might intend.
Jeff
At one of my accounts I'm using SQL 2008r2 and SSIS in an DWH solution. Today I wanted to created a dynamic sql statement in one of the packages. The dynamic part is in the where-clause a sql query I use. I want to set the values for this clause dynamically. Therefor I created a user variable (named 'Filter') which should get it´s value at run-time.
/DTS "MSDBProdMy Package" /SERVER "My-Server" /CHECKPOINTING OFF /REPORTING EW /SET "Package.Variables[User::Filter].Properties[Expression]";" where [Starting Date] < '2008-09-01 00:00:00.000' "
However when I execute this package with dtexecui it doesn not use the value specified after the /SET parameter, but instead uses the value specifiied at design time. I get the same when I add the execution of ths pacakage as a sql server job step (type SSIS). I would expect that value specified after the /SET parameter would overwrite the valus specified at design time, but I don't see that happening.
Hello, I am wondering how to code asp.net to prevent multiuser from modifying a share data (on sql server) at the same time.
View 1 Replies View RelatedI've one table which is contains sales Tax data and I need to send data(only for past month) to accounting person by every end of the month for Example. Today is July/1/2015 so I need to send data for month of June/2015.Â
Is there anyway I can setup a job to send a data. Also I am not able to send large file using OUTLOOK so is there any other Tool to send a data?Â
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
Hi there,
I'm trying to build a report for Windows Forms (C#) using .rdlc files.
But every time I run it, I get this error message. I've followed the step-by-step from MSDN instructions... but it doesn't work!
Could anyone help me?!
Tks a lot!
Luis Antonio - Brazil
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
I just recently added 30MB of SQL Server database space on my Share hosting account.
I want to put the SQL Web Data Administrator on the server but it is an MSI file and I cannot figure out how to install it.
Also, I will be testing my .Net pages on my local machine. How do I go about it without accessing the SQL Server on my host? I used MS Access before and I have a copy of both databases on my local machine and on the server. I'm thinking of using MSDE on my machine and I just change the connection string when I upload my code. Is this a good idea or is there a better alternative?
Thanks.
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies View RelatedI have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
View 3 Replies View RelatedA data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies View Related
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error
The column data for column "Column 20" overflowed the disk I/O buffer.
I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .
In case of Bad Data how to clean up the source.. Please help me with this