If I have a Mixed Mode Authentication - Can I remove it from my existing product while upgrading to SQL Server 2005? What is the impact to the installations?
what components rely on SQL Authentication?
Everything I've read says that custom data flow components are built by inheriting from the Microsoft.SqlServer.Dts.Pipeline.PipelineComponent class.
But the stock components such as the Derived Column data flow transformation must each be implemented by their own class. So how do I base my custom components on those classes? The documentation for the PipelineComponent class doesn't list any such subclasses.
Hi,
In another thread Jamie Thomson very informatively said "The components in SSIS
are deliberately atomic (i.e. they do something very specific) so that
its easy to put them together to build something greater than the sum
of the parts". Which does make a lot of sense. However, I've been finding that I end up having to create exactly the same "pattern" of combined transform components again and again in order to solve the same problem but in different dataflows (or even within the same dataflow). Cut-and-paste-tastic! In order to obtain real re-use, it seems to me like SSIS is crying out for an easy way to create new components by using composition - i.e. the ability to take commonly-used combinations of existing components and create new "super" components (without having to write Custom Transform Components in C#/VB.Net and handle everything in code).
Does anyone know if this sort of functionality is likely to make it into SSIS in the forseeable future?
Regards,
Lawrie
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Any idea?
thanks
I folks.I Have installed sql server 2005 express and choosed windowsauthentication on instalation, but i make a mistake and now i needmixed authentication, how can i modify this whithout uninstall andinstall again the application?thanks for the help.
View 2 Replies View RelatedHow to give authentication for Send Mail Task component?
View 4 Replies View RelatedHi there,I have installed MS SQL Server 2005 on my machine with windows authentication. But now I want to switch the authentication mode to SQL Authentication. I am unable to switch, I can’t find the proper way to do so here in 2005.Could any one help me in doing this?Thank you,-Ahsan
View 1 Replies View RelatedHello,
(Using win2k, sqlserver2k, framework 1.1)
I have an fairly data-heavy application that uses Windows authentication (Trusted connection/aspnet account) to connect to Sql Server. The site uses IIS basic authentication.
On the dev server everything works fine but when I move to the live server things get strange and it starts to crawl along. (Pages load OK but then it just crawls as it loads the datagrids etc. Sometimes it brings back incomplete/incorrect data )
BUT When I use Sql Authentication to connect to Sql Server and there is no problem at all!
Ok, there is something obviously wrong with the live server (which is identical setup to dev)but I dont know where to start.
Any ideas??
Hi all,
I've got two applications which both have a database on my MS SQL 2000 server. The problem is, one application must use Windows Integrated Authentication (which it is currently using and cannot be changed) whilst the other application which I'm trying to configure must use a SQL password.
Since the server has already been configured to use Windows Integrated Authentication for the existing database and application, how do I configure the other database to use the SQL password?
Thanks.
Hi all,
My work is using a shared application
which accesses a MSSQL 2000 database. To access the application, the
folder on the Windows 2003 Server is shared and users can access the
folder through a shared drive.
For the application to access the
database, it uses an ODBC connection to the MSSQL server which
originally used the SA password.
We have recently switched to using
Windows Integrated Authentication because we believe it offers a
higher level of security. However the only way in which we have been
able to enable this is to add the windows users to the SQL server.
The problem with this is that the
application sets permissions for individual users on what records
they can see within the database. We have found that by adding the
windows users to the SQL Server, they can bypass the permissions the
set by the application by simply using any application that can use
an ODBC connection, such as Enterprise Manager, and see all the
database.
One way around this would be to set up
domains of users with access privileges to the tables which reflect
the permissions set by the application, and configuring a view of the
data so they may only see the records that they have permissions to.
However to do this would require a high administrative cost to ensure
that changes made in the application are reflected in the privileges
of the SQL server.
Instead, is there a way the SQL server
can authenticate that the ODBC connection is coming from the correct
application using Windows Integrated Authentication?
This would allow the applcation to
determine security, and stop users from connecting to the SQL server
using other applications.
Alternatively, can the SQL server,
using Windows Integrated Authentication, also ask the application to
supply a username and password?
Any help with this matter would be
greatly appreciated.
Thanks!
Hi,I'm using SQL Server 2005. My Connection String looks like that at the moment: <add name="LocalSqlServer" connectionString="Data Source=xx;Initial Catalog=xx;Persist Security Info=True;User ID=xx;Password=xx" providerName="System.Data.SqlClient"/> Now I'd like to change this kind of authentication to Integrated Windows AuthenticationI added the WorkerProcess IIS_WPG to the permitted Users but it didn't help.Changed the Connection String to this:connectionString="Server=xx;Database=xx;Trusted_Connection=True;"All I'm getting is that my NetworkService is not permitted to access DB when I try to connect to the DB in ASP.NET.How can I properly configure that? Thanks!
View 4 Replies View RelatedHello
Can anyone tell me what is the difference between sql authentication and windows authentication.
Examples of each would be very useful
Many thanks in advance
Steve
Would anyone please help me out here. which of the 2 modes of authentication is better and why??
View 3 Replies View RelatedHi,
Say, I have configured my SQL to use Mixed Authentication. Now, I have a applicaiton which uses my SQL Server. The application just creates a database in SQL Server and uses the database to store its information.
This application also has a SYSTEM DSN under ODBC through which it accesses the database. For the application to access this database, should I only use SA (as my SQL instance is configured to use Mixed Authentication) or can I use Windows Authentcation too...
If I should only use SA, do we have a documentation which talks about this.
Thanks
Santhosh
For using different services of SQL SERVER 2005 which is better...
Windows Authentication or SQL Server Authentication?
what are the advantages and disadvantages of both?
Hi.
I wonder if it is possible to set forms authentication for report manager but leave report server "as it is". I need to authenticate users from external LDAP and can't use windows authentication for report manager, but I would also like to leave report server open for anonymous users. In that way authenticated administrators could create reports which anonymous users could read.
I tested the Security Extension Sample and got it working when I rewrote the authentication part with my own LDAP authentication.
If I have understood correctly, the report manager is just application inside report server so is it possible to use forms authentication with one application but still leave the report server with Windows authentication?
Hi,
I need to figure out what kind of Authentication , I need to use for following applicaiton
Product : -
1 ) It resides on a its Domain and has access to Database on that Domain.
2 ) We have a application level login , n based on application login id
display specific pages.
The question that bother me is this
Q ) If i use NT authentication , then a user will be required to
a ) Login to domain (with userid and password) first and then
b ) Then i would require to again login to applicaiton with application
level login and password.(different levels of login as there)
Based on the application level login i will display only specific
asp pages. They have different access rights..and roles.
Requirment is to login only once..and it should authenticate to application display specific pages and authenticate to SQl server database also..
Is there any way thru which i can map my application level login to SQl server.. and what authentication should i use..
Thanks,
Teny
I am in the process of rolling out a sql server 2005 enterprise install and had a question regarding authentication. We will be providing sql hosting for a number of groups on our campus, many who are not using our campus-wide active directory, though they all have an AD account.
Windows authentication via the management studio appears to use your AD authentication tokens and will not allow them to enter a username/password combo. Is there any way to configure this?
I would like to use our campus AD for obvious reasons but if there is a requirement for passing tokens this isn't going to work right? It's also going to make database mirroring more of a challenge.
Thanks
Gurus,
I have a job that contains a step to run a DTS task (DTSRUN /S.....etc.) via a batch file.
I can run either the DTSRUN command line, or the batch file that contains it just fine,
but when I try to run the job, it reports success but does not actually do the work.
I dont get an error message. I am using the sa account to run the DTS task from the command line.
I know this must be a permissions issue. As I am working at a Defense contractor, I cannot get a
domain admin account to run SQL Agent.
Any ideas where to look?
Kevin
Hi,
How can I tell whether I have SQL Server 7 Components on my computer?
Thanks,
Denise
Can any one give me brief useful explanations or guide me to a usefulresource of what Development Tools component and Profiler are?Is there anything I should be aware of if I want to install ClientConnectivity component (don't want to overwrite anything)?Thank you in advance.
View 1 Replies View RelatedI am not sure why when the packages are run, the components dissapear. The only thing I see is the result in the output.
So there is no visual on the tabs.
Thanks
Hi, help please!!
View 23 Replies View RelatedI am just a novice, and am curious.I
I was trying subscription, but an error occured: "Microsoft Server Management Studio is un able to accessreplication components because replication is not installed on this instance.
I went to change, located my setup exe, installed. but at the end, I get this message: No selected features can be installed or upgraded. Setup cannot proceed since no effective change is being made to the machine......
I downloaded the Express edition via MSDN download.
May somebody please help? What wrong did I do? What did I miss to do?
I have a question about client components. I read someplace where if sql client components are preinstalled
(if you delete sql express-client components cannot install, even if they are preinstalled
I have sql express default installation from vs 2008 pro
I have not installed sql express (client components, database components
I wish to install cd standard edition on my computer for reporting services
Also wanted to add enterprise server so I need report manager
office 2007 installed by myself. I came across this article kb909967.
Is there anyway to check make sure I can install client components installs on standard edition
I also read kb 964164 installing sql on vs 2008 vista ultimate Thanks
Hi again, All!!
I'm having a problem with problems with some custom components I built. I have a custom Connection Manager and Data Flow Source that I have built.
My local PC is 64-bit, but I followed the MS instructions on building and deploying custom components. They run fine inside of VS2005, as long as I have 'Run64BitRuntime" set to 'False'. When I try to run packages using the custom components in 64-bit mode, I get:
Error: 0xC0014005 at : The connection type "<MyConnectionManagerType>" specified for connection manager "PRI" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
I suspect I need to either change the way I build or deploy the custom components. Can someone shed some light on this?
Thanks,
Frank
Hi
I have installed SQL Server 2005 but Integration Services is just not there. I have uninstalled and reinstalled several times and in the process uninstalled an old version of Visual Studio.NET (manually because it wouldn't uninstall automatically) and Visual Web Developer, just in case they were interfering with Integration Services. No luck, in fact it got worse, now Analysis Services also does not work because it can't find devenv.exe!
I have installed exactly this same software on another clean PC (ie. no previous Visual Studio variants on it) and it installs perfectly.
There seems to be some kind of clash between old versions of Visual Studio and SQL Server 2005 that prevents SQL Server from properly installing products like Integration Services that use the Visual Studio interface (ie. devenv.exe).
I now can't even reinstall the old version of Visual Studio.NET, and devenv.exe is nowhere to be found on my PC although it is referenced throughout the registry.
Has anyone got any suggestions, all I am after if a full and clean install of SQL Server 2005 so I can develop against it using Visual Web Developer.
Thanks
Thanks in advance for your help...
I have been trying to create, then call an activeX object. I use sp_OAcreate and then sp_OAmethod to create the object, the call the method within. I have registered the DLL but I can not get it to work. I used the examples within T-SQL help but it doesn't seem to work. I am calling from within a sp within the northwind db. I need to pass 4 parms to the method. Here is the proc.
CREATE PROCEDURE SIMPLE2_SP
(@CUSTOMERID nVARCHAR(25) = NULL,
@ORDERID INT = NULL)
AS
DECLARE @BLOB nVARCHAR(1200),
@PARM1 nVARCHAR(25),
@SF INT,
@pOBJ INT
/***Make sure that the customerid is specified, if not, get out. sfogli 7-17-00
***/
IF (@CUSTOMERID is NULL) OR (@CUSTOMERID = '')
BEGIN
RAISERROR('Must specify a CUSTOMER name.',-1,-1)
RETURN (1)
END
/***Hardcode the path, customerid, and orderid for testing purposes. sfogli 7-17-00.
***/
--SELECT @BLOB = 'PATH=C:REPORT.HTM;CUSTOMERID=' + @CUSTOMERID + ';' + 'ORDERID=' + CONVERT(VARCHAR(5),@ORDERID)+ ';'
SELECT@PARM1 = 'PATH=C:REPORT.HTM;'
/***Append BLOB with revelant data from customer table, sfogli 7-17-00.
***/
SELECT @BLOB = (SELECT'CustomerID=' + CUSTOMERID + ';' +
'CompanyName=' + COMPANYNAME + ';' +
'ContactName=' + CONTACTNAME + ';' +
'ContactTitle=' + CONTACTTITLE + ';' +
'Address=' + ADDRESS + ';' +
'City=' + CITY + ';' +
--Contains null values'Region=' + REGION + ';' +
'PostalCode=' + POSTALCODE + ';' +
'Country=' + COUNTRY + ';' +
'Phone=' + PHONE + ';' +
'Fax=' + FAX + ';'
FROMCUSTOMERS
WHERECUSTOMERID = @CUSTOMERID)
/***Make sure that the orderid is specified, if not, raise message. sfogli 7-17-00
***/
IF (@ORDERID is NULL) OR (@ORDERID = '')
BEGIN
RAISERROR('To continue process, please specify an ORDERID and retry.',-1,-1)
PRINT @BLOB
RETURN (1)
END
/***Append BLOB with revelant data from orders table, sfogli 7-17-00.
***/
SELECT@BLOB = @BLOB + (SELECT'OrderID=' + CONVERT(VARCHAR(5),ORDERID) + ';' +
'CustomerID=' + CUSTOMERID + ';' +
'EmployeeID=' + CONVERT(VARCHAR(7),EMPLOYEEID) + ';' +
'OrderDate=' + CONVERT(VARCHAR(15),ORDERDATE) + ';'
/***'RequiredDate=' + REQUIREDDATE + ';' +
'ShippedDate=' + SHIPPEDDATE + ';' +
'ShipVia=' + SHIPVIA + ';' +
'Freight=' + FREIGHT + ';' +
'ShipName=' + SHIPNAME + ';' +
'ShipAddress=' + SHIPADDRESS + ';' +
'ShipCity=' + SHIPCITY + ';' +
'ShipRegion=' + SHIPREGION + ';' +
'ShipPostalCode=' + SHIPPOSTALCODE + ';' +
'ShipCountry=' + SHIPCOUNTRY + ';'
***/
FROMORDERS
WHEREORDERID = CONVERT(VARCHAR(5),@ORDERID))
EXEC @SF = SP_OACREATE "PMIDocHandler.HTMLDocs", @pOBJ OUT
IF @SF <> 0 GOTO ERR
--(sPath, sCustomer, sContractID, sKeyValuePairs)
EXEC @SF = SP_OAMETHOD @pOBJ, "CreateDocument" ,@PARM1, @CUSTOMERID, @ORDERID, @BLOB
IF @SF <> 0 GOTO ERR
ERR:
RAISERROR('THIS IS ONLY A TEST.',16,1)
--SELECT @BLOB AS 'VARIABLES PASSED'
RETURN
Hello,
Say I have a composite index, how can I programmatically find the components knowing only the table name?
For example, an index was created as follows:
CREATE UNIQUE INDEX [some_table_index] ON [some_table]([col1], [col2]) ON [PRIMARY]
Now, I'd like to get back 'col1' and 'col2' when I search for 'some_table'.
Thank you
Hi
I am looking for a function or so to format a number to two digits plus one decimal point.
Some examples:
- if input=4 then output= 04.0
- if input=40 then output= 40.0
- if input=4.1 then output= 04.1
- if input=4.32 then output= 04.3
Any idea?
I have a Windows XP machine that I have run SQL Server on in the past.I recently re-formatted the hard drive and re-installed XP from scratch,and now when I try to re-install SQL Server 2000, I get an error messagesaying that the "server component is not supported on this operatingsystem. Only client components will be available for installation." Ihave a hard time understanding why the server components can't beinstalled on XP, especially since I've installed them before on thissame machine.Can anyone explain why this might be, and what I can do (if anything) sothat it can be installed again?Thanks.Steve
View 1 Replies View RelatedHello,
I have DFTs with around 50 components and future ETLs will have 100+ components in DFTs.
I was wondering that is there anyway to group components like we have #region in C#.
Thanks,
Kapil
When trying to install the components on a PC.Upgrade blocked However everything was uninstalled to start again. Any ideas where to start?
View 2 Replies View Related