as Christopher Yager say in "Need distributed service broker sample", I also test sending messages between two SQL Server 2005 instances,and after I setup the test environment with instance1 and instance2,I find queue [q2] in ssb2 can't receive message from ssb1. when I query by "select * from sys.transmission_queue",I get some message records that transmission_status is "64(error not found)".
View 12 RepliesHi;I went to the microsoft site to try to find a guide to the errormessages that the jdbc drivers give ( for sqlserver 2000 ).I had no luck.Does anyone know if there is such a guide?I got this mysterious error message below in my logs ( nothing visiblein user land ).Anyone know what it means?Thanks in advanceStevejava.sql.SQLException: [Microsoft][SQLServer 2000 Driver forJDBC][SQLServer]Transaction (Process ID 151) was deadlocked on lockresources with another process and has been chosen as the deadlockvictim. Rerun the transaction.
View 5 Replies View RelatedI've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
.im trying to run a script. and i get the errror at the topic. what can i do?
my pointed code is:
Code Snippet
Sur.open "PROVIDER=MICROSOFT.JET.OLEDB.4.0;DATA SOURCE=" & strMDBPath
im running on windows vista 64x bus.
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
Hi All,
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Can you anyone please provide solution for this?
Thanks in advance,
Anand Rajagopal
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies View RelatedHi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn) 'gi convert and image to byte array Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength) comm.Parameters.Add("name", System.Data.SqlDbType.Text) comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower comm.Parameters.Add("pic", System.Data.SqlDbType.Image) comm.Parameters("pic").Value = data comm.Parameters.Add("type", System.Data.SqlDbType.NChar) comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType If FileUpload1.HasFile = True Then Try conn.Open() comm.ExecuteScalar() Label1.Text = "Successfully uploaded" conn.Close() Finally End Try End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click Server.Transfer("image.aspx") End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String Dim reader As SqlDataReader Dim dataBuffer() As Byte connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Select * from TImage where no = @no", conn) comm.Parameters.Add("no", System.Data.SqlDbType.Int) comm.Parameters("no").Value = 5 conn.Open() reader = comm.ExecuteReader reader.Read() Response.Clear() Response.AddHeader("Content-type", reader("CategoryName")) Response.AddHeader("Content-type", reader("MimeType")) Dim blen As Integer = CType(reader("picture"), Byte()).Length dataBuffer = reader("Picture") Response.OutputStream.Write(dataBuffer, 0, blen) Response.Close() conn.Close() End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks...
View 1 Replies View RelatedWe are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
I have seen this buried deep with the questions on Service Broker, but I am looking for it again. How do you delete all records from your sys.Transmission_Queue. This is on a test server and I want to clean it before some more test.
We are having a problem with messages getting out of transmission_queue and into the queues themselves. The queues all are actviated and enabled, and our service broker is enabled at the database level. The dba detached & reattached the db yesterday, which I believe may be the cause of this problem. Everything seems to be in order (sp ownership, activation procs, etc), except when I run:
select [name], count(*)
from sys.dm_broker_queue_monitors qm
inner join sys.service_queues sq on qm.queue_id = sq.object_id
group by [name]
I get 2 entries for each queue. And the last_activated_time is the same date as the detach event. When we reattached we had to do an alter database set enable_broker in order to get it back up and running. When I run the above query on our dev and test environments, I get only one entry per queue.
Does anyone know why this would happen? Is this a valid state for SB?
And to get past it, if we can't figure out the real fix for it, we want to get a copy of all the messages in the transmission queue, do an alter database set new_broker, then replay them all into SB. We hope this fixes the root cause, but it's a guess.
Any ideas? Thanks in advance,
John
hi all!
I have 2 instances that communicate via service broker.
The conversations are only one way from initiator server1 db to target server2 db.
I also reuse dialog id's in BEGIN DIALOG @dlgId
i save @dlgId from the first run into a table and then retreive it for each message send
since the messages are constant i don't close the dialog at the target for each message.
i'm just wodering why do both sys.transmission_queue and sys.conversation_endpoints get a row
for each message i send but the transmission_status in sys.transmission_queue is emtpy.
also each conversation_handle and conversation_id is different for each row and
only one row in each sys table has the same conversation_handle as my saved @dlgId.
just wondering what is going on.
this code is done on the initiator
DECLARE @dlgId UNIQUEIDENTIFIER
-- each database has one dialog id
SELECT @dlgId = DialogId
FROM dbo.Dialogs
WHERE DbId = DB_ID()
-- Begin the dialog, either with existing or new Id
BEGIN DIALOG @dlgId
FROM SERVICE [//DataSender] -- service on initiator server
TO SERVICE '//DataWriter', -- service on target server
-- Target's Service Broker Id
'83382A22-2830-4B25-B067-15AAC255EB03'
ON CONTRACT [//Contract1]
WITH ENCRYPTION = OFF;
-- Send data
;SEND ON CONVERSATION @dlgId
MESSAGE TYPE [//Message1] (@msg)
Thanx,
Mladen
Hi,
At my company, we're trying to use service broker to create a client-server system where there is a head office machine and multiple outlets registered with that head office. My problem is that sometimes when a branch sends a message to the head office, it just seems to sit in the transmission queue and never gets sent. If I run a script that forcibly ends the conversations on the client machine (with cleanup), storing the message bodies and then resend them, they seem to get through fine.
The way that we send messages is by calling a t-sql stored procedure from a c# application using SqlCommand (don't know if this should make any difference).
If I monitor the Head Office machine and one of the Outlets while this is happening, on the HO I get three events in a row:
Broker: Message Classify (1 - Local)
Audit Broker Conversation (2 - No Certificate)
Broker: Message Undeliverable (1 - Sequenced Message)
The TextData contained in the third event is: This message could not be delivered because the security context could not be retrieved.
The RoleName of the server is Initiator, and the TargetUserName is the name of the service on the Outlet.
On the Outlet I get the following event repeatedly (presumably as it continues to try sending the message) - Broker: Remote Message Acknowledgement (1 - Message With Acknowledgement Sent).
On the client the RoleName also appears to be Initiator, and the TargetUserName is blank.
This would make me suspect that certificates were missing or something, except that if I remove messages from the queue and resend them they seem to get through, and also I've checked both databases and they have the correct certificates.
Any ideas?
Thanks in advance,
Adam
Sorry for the stupid question, but I can't seem to figure it out...
There are 119 messages that are stuck in the transmission queue, all for the same queue. When I check the status of the queue (via sys.service_queues), is_receive_enabled = 1, is_activation_enabled = 1, and max_readers = 3. When I check to see if there is an active queue monitor (via sys.dm_broker_queue_monitors) there is nobody watching this queue. What would cause this queue to be active, enabled but have nobody montioring it? Is there something internal that went wrong that made these (outbound) messages get stuck in the transmission queue, and is not showing up in the views? How can I get these messages "un-stuck" and flow through the system?
A problem I am seeing is the return message to this queue (to signify the target has consumed the message, and to end the conversation) are not being consumed, thus getting stuck in the "DI" state.
Any suggestions would be greatly appreciated.
Thanks in advance,
John Hennesey
Are lock hints propagated to the underlying tables of system catolog views? I ask because I often query sys.transmission_queue with nolock, and I wanted to know if this was honoured through out the underlying tables.
Secondly, is sys.transmission_queue indexed at all, providing a way to prevent table-scanning?
Thanks
For some reason the messages are stuck at sys.transmission_queue. The transmission status seems to be null. I verified all the Queues and they hae the values of (is_receive_enables = 1, is_enqueue_enabled = 1, is_activation_enabled = 0)
I have set up the service broker on different domain and have bidirectional ports open to receive messages.
I can send and receive messages, when I run the same service broker setup scripts at the machines that belongs to same domain .
any help appreciated.
Is there any thought going into moving these two tables to a file group that we can control? Putting this in Primary with the rest of my system tables is quite problematic, and hinders my ability to manage space usage on my files. Traditionally, we didn't have to consider a primary file group that could grow to large proportions, but now with these two tables it can. If a large volume of messages gets sent through and the system can't keep up, then these tables and my primary file group will grow sometimes enormously.
View 8 Replies View RelatedI may have a misunderstanding of how SB works, but this seems like a problem.
If a queue is disable (i.e. status = off) and a message is sent to the queue the message is placed on the sys.transmission_queue. Once the queue is enabled I thought the messages were sent to the queue in the order they were placed on the sys.tranmission_queue? I have been troubleshooting a problem and this is not the case. Do I have a misunderstanding of how the sys.transmission_queue works?
The queue has retention turned off.
Hi was wondering whether it is possible to log somewhere outside SB that there are messages in the transmission_queue because the Target queue was disabled.
I was testing this scenario:
try to send messages on a disabled queue and log the problem.
But the transmission_status from the trasmission_queue is always empty.
This is the code that I tried to execute between the send and the commit and after the commit:
WHILE (1=1)
BEGIN
BEGIN DIALOG CONVERSATION .....
SEND ON CONVERSATION ......
if select count(*) from sys.transmission_queue <> 0
BEGIN
set @transmission_status = (select transmission_status from sys.transmission_queue where conversation_handle=@dialog_handle);
if @transmission_status = ''
--Successful send - Exit the LOOP
BEGIN
UPDATE Mytable set isReceivedSuccessfully = 1 where ID = @IDMessageXML;
BREAK;
END
ELSE
raiserror(@transmission_status,1,1) with log;
END
ELSE
BEGIN
UPDATE [dbo].[tblDumpMsg] set isReceivedSuccessfully = 1 where ID = @IDMessageXML;
BREAK;
END
END
COMMIT TRANSACTION;
As I wrote before the @transmission_status variable is always empty and I have the same result even if I put the code after the commit transaction!
Maybe what I'm trying to reach has no sense?
With the event notification I can notify when the queue is disable because the receive rollsback 5 times but what if by mistake the target queue is disabled outside the SB environment? I can I catch it and handle it properly?
Thank you!Marina B
I've got 2 service broker databases on remote servers. I've created my endpoints, my routes and have everything set up. But when i send a test message, the messages set in the transmission_queue. There is no transmission_status. And when i look in at the sys.conversation_endpoints view I see that the conversation status is conversing. One odd thing I wanted to point out though is that the far_broker_instance column of the sys.conversation_enpoints view is null. When i run a trace on both databases, I see activity on the Initiator with things like Started_OutBound and conversing but I don't see any messages such as acknowledgment or any errors. On the Targer side I see no activity at all. Does anyone know what the deal is. Why don't I get some kind of error message. Why are all my messages staying in the transmission_queue?
Thanks in advance.
Hi,
we have a active/passive cluster server with SQL server 2005 SP2 installed.
i have found the following error messages in event viewer application log for MSSQLServer:
1) [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed.
2) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host.
3) [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure
4) [sqsrvres] OnlineThread: QP is not online.
can any one pls help me finding out the solutions.
Thanks in Adv,
Praneetha.:)
I downloaded and installed sql express yesterday. After I rebooted I get a File not Found error.
View 1 Replies View Relatedwhen i try to execute the package i keep getting an error like below even though all the connections in the connection manager is working fine.. how can I resolve thsi problem?
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{B593900A-434B-4A7A-9AF1-CC248A22D106}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error: 0xC001000E at : The connection "{616CB160-84E6-4A65-B362-4F2B1D1767F9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Hello,
I have a question..
I set-up my Service Broker comunication on the same SQL Server Instance beetween 2 different DBs.
One DB behave as Initiator and send messages to the SB service setup in the other DB.
I execute the SEND statement from the Initiator and if I count the messages on the sys.transmission_queue before to commit the transaction the count returns 0.
If I try to send a message not compliant with the message type, the count that runs after the SEND returns 1 - far enought.
I'm confused about the first behaviour because from what I understood the Acknolodgment and the removal of the message from the sys.trasmission queue should happen after the COMMIT.
Some expert can aswer to this direct quection?
Thank you
Marina B.
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
Hi every body
when i try to make backup in location different sql server express 's default location for making backup device it tackes an error
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Backup failed for Server 'PDSTUDIOSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Cannot open backup device 'SQLEXPRESS2005(D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak)'. Operating system error 5(error not found). (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
And this is my code for making backup
USE master
GO
EXEC master.dbo.sp_addumpdevice
@devtype = N'disk',
@logicalname = N'SQLEXPRESS2005',
@physicalname = N'D:My DocumentsVisual Studio 2005DataBasesBackupSQLEXPRESS2005.bak'
GO
Server : SQL Server 2005 Express Edition
what is the problem????
Hi there,
lately I had the following message on win2000 sp4 with sqlserver2000 sp3a: "DTS Designer Error - Specified file not found".
Then in the DTS editor the Task menu objects are missing and it is not possible to link a source and a target using Transform Data Task.
Before it used to work fine.
I have done the following:
- installing again last sp: same issue again
- reinstalling sqserver with a registry deep cleaning: same issue again
- started disabled windows services: same issue again
any idea?
Carsten
edit:
Could it be possible that a lately installed fix for Win2K interferes with DTS-Designer?
Hai,
Installed SQL server 2000 as a SERVER in one machine and Client tools of SQL server 2000 in another machine as CLIENT.
Able to connect and view SERVER machine SQL SERVER 2000 database from CLIENT machine and it is working fine.
while trying to connect locally SQL Server 2000 in CLIENT machine itself,getting the Error "VNSAPI32.dll not found or Missing"
Not used Banyan VINES network, still getting
SQL server does not exist or Access denied "ConnectionOpen(Connect())"
regards,
karthy
Hello,
Does anyone know what this error means and how to resolve it? I get this error when I attempt to run a Data Flow Task. The Data Flow Task has one subcomponent, a Flat File Source. I have set up the connection manager to access the flat file, which is on a local directory. I have tried everything to fix this. What could possibly be the problem??
Thanks
Error: 0xC001000E at : The connection "{B9E11DD7-21A1-4FD7-986F-6BDC5B81F51D}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
I'm getting the error
Error: 0xC001000E at : The connection "" is not found.
when executing Control Flow tasks. However the tasks still completes successfully (Execute SQL or DataFlow tasks), and the Control Flow box turns green in the usual fashion.
However if I try to execute all of the Control Flows (using the green Debug arrow), nothing will execute as I get a Package Validation error, with the same error message.
Any ideas why this might be occurring? All of my connection managers look to be set up correctly
I was requested to build and move and existing SSIS package from the developers local PC to the Dev server. Both are running SQL 2K5, I built the following command file so SQL Agent can run the import job.
REM *** Run for FileImport
set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig
"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigFileImportFileImportLoadData.dtsx"
All files are in the proper place but when the jobs runs the following message shows up in the history;
Message
Executed as user: LIGHTHOUSE1SQLEXEC. ...system32>set FileImportLoadData=C:SSISConfigDEVFileImportLoadData.dtsConfig C:WINDOWSsystem32>"C:Program FilesMicrosoft SQL Server90DTSBinndtexec" /f "C:SSISConfigDEVFileImportLoadData.dtsx"Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:54:00 AM Warning: 2008-05-08 08:54:01.77 Code: 0x80012014 Source: FileImportLoadData Description: The configuration file "FileImportLoadData.dtsConfig" cannot be found. Check the directory and file name. End Warning Warning: 2008-05-08 08:54:01.77 Code: 0x80012059 Source: FileImportLoadData Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Progress: 2008-05-08 08:54:01.82 Source... Process Exit Code 0. The step succeeded.
My questions is how do I fix this and is this really and error?
Jay B.