When Grows File Mdf ?
Oct 15, 2004My cuestion is, when grows (in %) the file mdf
if " Automatically Grow file" is on, because my database
have the 94 % used and the file no grow.
I read several docs ,and not found nothing.
thanks
My cuestion is, when grows (in %) the file mdf
if " Automatically Grow file" is on, because my database
have the 94 % used and the file no grow.
I read several docs ,and not found nothing.
thanks
I have a publisher database set up for a merge replication. This is using parameterized filter with join filters.
I also have a stored procedure that does deletes & inserts on the table where the parameterized filter is applied to aid in changing a subscriber's eligibility to receive so and so data. I have observed that running the stored procedure takes extraordinarily long and as a result, the log file grows to a size 1.5 - 2.5 times the database size.
At first I reasoned that this might because I had it set up to use precomputed partitions and changing it requires recalculating the partitions. As a test, I turned off the precomputed partitions. Didn't work. I turned on "optimize synchronization" AKA "keep_partition_changes", which normally is not available when you have precomputed partition on, and that didn't work, either.
At this point, I think I can rule out precomputed partitions being a problem here but I'm stumped now what else I should do to reduce the amount of log writes being required. We do need the parameterized filters & join tables, so that can't go.
I am really curious about the row per table grow.What does slow down first?
inserts ,updates,deletes,joins ??
like does billion row table is much slower than a million row tables?
How can find some guidence?
Hi SSRS Experts
We encounter the problem, that a reportservertempdb grows extremly large... the sessiondata and snapshotdata tables are about 10gb each at the moment and keep growing and growing...
The CleanupCycleMinutes Configuration is set to default=10. We are not taking snapshots of our reports.
Shouldnt those tables be cleaned up every 10minutes with this setting?
What can we do to stop this database growing? is truncating those tables on a weekly base a solution?
We are using SQL Server Reporting Services 2005 SP2 with Cumulative Hotfix Package 5 (Build 3215).
Thanks for your answers...
Kind Regards,
Roger
Hi,
Asp.net 2.0 (VB) application with Sql server 2000 Installed in windows 2000 professional server.Only less than 10 users using this application.
The problem is sometimes the application didn't response, it's very slow to get the information and after sometimes its never responding it showing hourclass.
I used Helper class (Application Block). Since Sql Server 2000 doesn't have the MARS Function, i have manually close the connection and opening again everytime.
Any idea?. Thanks in advance.
Help Class Modified Code:
--------------------------------------
Code :
' If the provided connection is not open, we will open it
If connection.State <> ConnectionState.Open Then
connection.Open()
mustCloseConnection = True
Else
mustCloseConnection = False
End If
Data ObjectBase :
---------------------------
'The transaction will call this method and also check the connection status
Public Sub BeginTransaction()
Try
If Not (myTransaction Is Nothing) Then
'Throw New Exception(ConfigManager.ReadFromXml("msg_DataAccess_Begin_trans"))
Throw New Exception("Transaction Error in Begin")
End If
If ourConnection.State <> ConnectionState.Open Then
ourConnection.Open()
myMustClose = True
Else
myMustClose = False
End If
myTransaction = ourConnection.BeginTransaction()
Catch ex As Exception
'Throw New BRSDatabaseException(ex.Message, ex)
Throw ex
End Try ''''
End Sub
I currently have a SQL backup process that backs up my databases via the network to a backup hard drive on a separate system. I recently began getting strange issues with my backup process in which it continually writes to the backup drive until the drive fills up and then the job fails. I also noticed that when I kill the job on the host server, the backup file drops to the normal file size. The normal file size is 300 GB but it has grown to over 400GB. I looked at various logs and even performed several backup tests with success.
I am trying to figure out if this is a known SQL Server issue or an issue with the OS?
specs:
windows 64bit/sql server 2k5 64bit
Thanks in advance for the help.
Hi,The tempdb file on one of our servers grew very large and used allavailable disk space. This is SQL Server 2000 SP4. I have installedhotfix version 8.00.2187. I opened a profiler trace but can't still getto the root of the problem. Any help will be appreciated.Egbon*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedHi all,
This managed application was written to run on a Symbol 3090 Win CE 5.0 scanning device. We are using the symbol provided classes to access the scanning interface, and SQL Compact database on the device to collect the scanned data, and then using merge replication to synchronize scanned data when the device is docked. The problem we have experienced seems to be releated to the performance when inserting and updating records in the database.
We have tested some randomly generated 1000 records and inserting/updatating into a database. At first the time to commit a record increases when the database is flushing into the memory (The flush interval in the connection string property is 10 seconds by default). and then as the database size grows increasing the time to commit every single record which is causing the application to perform slowly as they scan items into the database. However, the device program memory remains consistant as they are scan items. From our tests, I found the time to execute either a update/insert command on 2MB sqlMobile database (upto 10000 records, depending on the size of the columns) is taking nearly 2 to 2 and half seconds to complete. Below is the only code I am executing,
If Not sqlObj.UpdateItem(1061022, itemNo, 1) Then
sqlObj.InsertResultSet(1061022, itemNo, itemObj.Style, itemObj.Color, itemObj.Size, itemObj.Description, 0, 1)
End If
For the notes, I am using prepared updated command and resultset.insert methods to perform update and insert commands into the database.
Any help on this issue is highly appreciated.
Thanks
Ravi.
Currently have a single hard coded file path to the SSRS config file which parses the file and provides the reporting services web service url. My question is how would i run this same query against 100s of servers that may or may not share the same file path as the one hard coded ?
Is there a way to query the registry to find the location of the config file of any server ? which could be on D, E, F, H, etc.
I know I can string together the address followed by "reports" and named instance if needed, but some instances may not have used the default virtual directory name (Reports).
Am I going about this the hard way ? Is there a location where the web service url exists in a table ? I could not locate anything in the Reporting service database. Basically need to inventory all of my reporting services url's.
I have a customer they are running raid 5 on a windows 2000 server one of the drives went bad. The customer replaced the drive and raid rebuilt the drive, every thing seamed to be fine but there is one database file that cannot be attached to SQL. The file is 15G so I know there is information the error states that the file is not a Primary file. Any clue on how to fix this?
mdf file size 5,738,944 KB
ldf file size 10,176 KB
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
how can i attach the mdf file with a corrupted/deleted Log file
my log file is deleted how can i attach the mdf file
I am testing some maintenance tasks sql commands such as index rebuild, index reorg, update statistics and db integrity check on a SQL Server 2014 Database. This is a new non-production vendor database (DB Size 500 GBs, Log Size 25 GBs) which eventually will be created in production. Currently, it is in full recovery model and without log backups. The database has a whole lot of indexes. I am just trying to rebuild and reorganize all the indexes (that need it), in addition to trying to get an idea of how long these maintenance task will take and the space needed in the log file to complete these tasks/commands. I would like to execute these tasks manually (the first time) to gather the duration and space required information. Eventually, I would probably schedule a weekly job to perform this maintenance.
I ran the index rebuild task on the database and noticed that the log file grew by over 50 GBs. I killed the process and truncated and shrunk the log file back down.
1. Does the index rebuild, index reorg, update statistics and db integrity check commands all use the log file?
2. Does Indexs Reorg have less impact on log file then Index Rebuild?
3. Should a truncate log and shrink log file be performed after these maintenance commands?
4. Should a full database backup be performed after these maintenance commands? Or before the maintenance commands?
I have read and understand that shrinking is not good for the database (could lead to more fragmentation and more data file growth when data is added) and I know about rebuilding indexes when fragmentation is GT 30% and reorganizing indexes when fragmentation is GT 5% and LE 30%.
Since this is a non-production database maybe I should set the recovery model to simple, run the maintenance commands and leave the database in simple recovery model unless the vendor needs it in full recovery model for some unknown reason.
5. With the simple recovery model the log file should be reused in a circular manner and not grow during these maintenance tasks. Is this correct?
Hello World,
I'm new to SSIS and would like a little assistance getting started, if possible...
Here is what I want to do:
Check if file exist (C:DTS UpgradeFilexxx.txt) --->
Archive file (C:DTS UpgradeArchive) --->
Check if file has data (true or false)
AND/OR
If there are any good website that have good direction, let me know
Thanks in advance for your help!!!
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedI'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
Hi,
I am looking for tutorials about how to create dts et dtsx files.
Thanks for your help.
Arioule.
In my script task I have the following code. The task I'm trying to accomplish is:
If the filename on FTP can be found in the local archive folder of e: drive then show message "FileAlreadyThere" (I will ultimatley change it to do nothing); if the filename on FTP cannot be found in the local archive folder of e: drive then transfer the file to the local package folder on d: drive.
While the script task is executing I was watching it closely, but the problem i saw is that:
If some files on FTP are already in local archive folder and some are not, then it the files which are already in the archive folder are dumped to the package folder; then after that the files which are not in the archive folder are then dumped to the package folder. But I only want the new files on FTP to be transferred to the package folder for further processing.
Then after this is finished, I saw all the files in the package folder are refreshed one after another, after the first round of refresh the second round starts, after the second round finishes it then stopped. I saw it refreshes itself because the 'Date Modified' of the file changes. And I saw the script task turned green.
I don't see how the code below produced this result. Something is wrong in the logic of the loop? Anyone has any idea why it's behaving the way it is now? And how to change the code to accomplish what I want? Thanks a lot!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
cm.Properties("ServerName").SetValue(cm, "ftp2.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0")
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
ftp.Connect()
ftp.SetWorkingDirectory("/directory")
Dim fileNames() As String
Dim folderNames() As String
ftp.GetListing(folderNames, fileNames)
If fileNames Is Nothing Then
MsgBox("NoFileOnFTP")
Else
Dim fileName As String
For Each fileName In fileNames
If File.Exists("c: emp" + fileName) Then
MsgBox("FileAlreadyThere")
Else
ftp.ReceiveFiles(fileNames, "c: emp", True, True)
End If
Next
End If
ftp.Close()
End Sub
End Class
Hey All,
Similar to a previous post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=244646&SiteID=1), I am trying to import data into a SQL Table.
I am trying to program a small application that will import product data obtained through suppliers via CD-ROM. One supplier in particular uses Fixed width colums, and data looks like this:
Example of Data
0124015Apple Crate 32.12
0124016Bananna Box 12.56
0124017Mango Carton 15.98
0124018Seedless Watermelon 42.98
My Table would then have:
ProductID as int
Name as text
Cost as money
How would I go about extracting the data with an XML Format file? I am stumbling over how to tell it where to start picking up data for a specific column.
Is there any way that I could trim the Name column (i.e.: "Mango Carton " --> "Mango Carton")?
I don't know if it makes any difference, but I've been calling SQL from my code by doing this:
Code in C# Form
SqlConnection SqlConnection = new SqlConnection(global::SQLClients.Properties.Settings.Default.ClientPhonebookConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.CommandType = CommandType.Text;
cmd.CommandText = "INSERT INTO PhonebookTable(Name, PhoneNumber) VALUES('" + txtName.Text.ToString() + "', '" + txtPhoneNumber.Text.ToString() + "')";
cmd.Connection = SqlConnection;
SqlConnection.Open();
cmd.ExecuteNonQuery();
SqlConnection.Close();
RefreshData();
I am running Visual Studio C# Express 2005 and SQL Server Express 2005.
Thanks for your time,
Hayden.
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
The TEMPDB transaction log file keeps growing.The database server is new and the transaction log was presized to 1 GB on installation. After installing a number of databases, the log file grew over a day to 38GB. Issuing a manual checkpoint was the only way to free some space to allow it to be shrunk back to a usable size. The usage of the file is still going up.
I am struggling to find what process is causing the log to be used so heavily. Looking at the log reuse wait desc for tempdb returns "Nothing" and tempdb itself isn't being used very much or growing in size.
In a server we had File Growth,And then We had to Add New Hard Drive And New File On It.And Now We have New server with a Huge Hard Drive.But all files remaind.Can I Reduce This files to One data file or not ?
View 3 Replies View RelatedHi,I am trying to use BULK INSERT with format file. All of our data hasfew bytes of header in the data file which I would like to skip beforedoing BULK INSERT.Is it possible to write format file to skip these few bytes ofheader before doing BULK INSERT? For example, I have a 1 GB data filewith 1000 byte header. Except for first 1000 bytes, rest of the data isgood for BULK INSERT.Thanks in advance. Sorry if it is really a dumb question as I am newto BULK INSERT and practicing still.Bob
View 7 Replies View RelatedI've production sql server 7 sp3 on windows NT. I had a 8GB data file ofwhich 5GB were used and 3GB were unused. I wanted to take back the unused3GB.So I did the following with EM GUI:1. I tried to "truncate fre space from end of the file". Didn't truncatethe file. I believe there was no empty space at the end of the file.2. Next I chose the option to "shrink file to 5GB". And to my horror thedata file instead of taking just 5GB took the empty spaces also and the sizeof the used data file went to 8GB.Any idea what's going on?TIA,SP
View 2 Replies View RelatedI have a ssis package where I need to have excel destination. In the Excel file, I need to have few rows with some text and then populate data below the text. One the text is like this:
Data as of: 08/25/2015
if the report ran today, then Data as of will have Yesterday. So, if the user opens that excel file after a week, then user should see same Data as of: 08/25/2015. not today()-day(1).
I was planing to handle on excel side with today()-day(1). but it only works the day it was run. Then the excel file is open after few days later, then it might as Data as of: 08/30/2015 which is not true. It should still stay Data as of:
08/25/2015 on what ever date the excel file is open. The SSIS package runs only once.
How do I handle this so that whenever user open the file, they will see Data as of: 08/25/2015. This is not a column in excel. It is like a description of data in excel.
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
Hi all,
I have a database name MyDatabase (SQL Server Express Dabase File). Is there anyway that I could convert it to SQL Server Compact Edition File?
By the way does anyone here got any problem with programming in SQL Server Compact Edition? It troubles me.
Thanks,
bombie
hi all;
1. Excel file Source--> monthly Revenue details
2. Derived Colum Transoformations
3. Oledb Destination
its my flow in one of my packates (ETL job)
Excel file contains monthly revenue details, i wanna import the excel data to my database staging table, so i've created the package.
its working fine...
Problem
if we change the new data for the next month and running the package its not running;
the same file, same format, only we delete the contents, of the file except first row of the excel sheet,
and pasting the new data;
new data is coming from Oracle DataBase in the form of excel sheet ( manually they will copy the data and sending to us)
i open that package in design mode and while double clicking the excel file source it says <column name>'s Meta Data needs to be synchronized
Do you want to Fix this issue automatically with the available external column's meta data
Clearly noted that its a data type issue; i have changed the corresponding data types as it is in the previous Excel sheet which is equivalant to the Table its copying to.
now the package is running with validation warnings, External Column "Invoice Amount" needs to be updated...etc. some 2 or three warning messages i can able to see in the package Execution wizard,
ok, i'm ready to accept these warnings, and i want my package running from my server;( packages had been deployed in to the Centeralized server; every time if we want to run the package, we have the asp.net webpage, that is executing the package in an On_click event)
The package is not running from the server, its due to the meta data change in the Excel file( i guess)
please suggest me some guide lines to resolve this meta data issue, i want my excel sheet meta data should not change when we have new updates in it;
otherwise suggest me some solutions that i can validate the excel sheet before running the package and testing whether the data is in correct format or not? its a kind of Data Profiling activity;
i know its some what crazy, but i need to maintain the system with permanent solution, instead of facing this meta data mismatch issue!!!
some what lenthy explanation--> its needed for my dear powerful microsoft responders. i think i 've explained my problem clearly, if i don't let me know your queries, i'll try my level best.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Thanks in advance for any help.
How to use Microsoft Data Link(Udl) type file to connect with SQL Server using SQL Native Client,If i use OLDEDB Connection i can make connection using UDL file with Database ,but how can i use a file for a connection using SQL Native Client.Is there any other data link file that can be used to connect with SQL server using SQL Native Client.
View 5 Replies View Related