da = New Data.SqlClient.SqlDataAdapter("SELECT [Products].[Names], Count([ProductList].[Products]) AS [Total] FROM [Products] LEFT JOIN [ProductList] ON [ProductList].[Names] = [Products].[Names] GROUP BY [Products].[Names] ", strConnection)
can we use a where condition in the statement.If so how can we use it.
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
Hi all,I'm building a DataSet on Visual Studio and don't know how to do a condition (if/else) with SQL... I have a search form, with a DropDownList and have 2 options in it: Search by Title or Search by Author. If the "Title" is selected, then the value is "title and if "Author" is selected, then the value is "author".Here is what I have right now for the DataSet, as seperated queries but I think I can combine them to be one single query 1.This will returns the songs that matches the title:SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER, LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK, LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BYFROM t_lyricsWHERE ((@LYRICS_TITLE IS NULL) OR (LYRICS_TITLE LIKE '%' + @LYRICS_TITLE + '%') OR (LYRICS_TITLE2 LIKE '%' + @LYRICS_TITLE + '%')) AND (@LYRICS_TYPE = 'title') 2. This returns the songs that matches the author: SELECT LYRICS_PK, LYRICS_TITLE, LYRICS_TITLE2, LYRICS_WRITER,
LYRICS_WRITER2, LYRICS_COWRITER, LYRICS_DATE_ADDED, UserId_FK,
LYRICS_APPROVED, LYRICS_TYPE, LYRICS_VIEWS, LYRICS_ADDED_BY
FROM t_lyrics
WHERE ((@LYRICS_AUTHOR IS NULL) OR (LYRICS_AUTHOR LIKE '%' +
@LYRICS_AUTHOR + '%') OR (LYRICS_AUTHOR2 LIKE '%' + @LYRICS_AUTHOR + '%'))
AND (@LYRICS_TYPE = 'author') This is very inefficient because I have 2 queries, and I need to build 2 ObjectDataSources as well as 2 different GridViews to display the results. I think we can do something likeSELECT .... ... FROM t_lyricsif (@LYRICS_TYPE = 'title') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH TITLEelse if (@LYRICS_TYPE = 'author') DO THE WHERE CLAUSE THAT RETURNS MATCHES WITH AUTHOR But I don't know how to write that in T-SQL.Any help would be greatly appreciated,Thank you very much,Kenny.
hi
i want to give .text filed of a TextBox to where condition but the result is not correct.
The SQL is like following:
selStr = "SELECT COUNT(*) FROM Users WHERE (Name = usernameTextBox.Text) and (Password = passwdTextBox.Text)"
i have a table like this
ID DATE time status
01 11/11/2011 10.23 Entry
02 11/11/2011 11 .47 Exit
03 11/11/2011 12.54 Entry
04 11/11/2011 2.54 Exit
i want to select the minimum time from entry and maximum time in exit.
the status should be checked when taking the max and min values .
how to do this.
Hi,I want to write a SQL stmt.(condition) that checks the following @ActionPLanID > 0 and ActionPlanID exists in table A simultaneously?
I was thinking of using IF NOT exists but don't know how to write it. Am I going in the right direction?
Thanks,
VBJP
hi,
i'm working on a query and have discovered something fairly simple regarding "and" / "or" condition.
if I use e.g.
id_product in ('1111','2222')
as a result i should get all products that match id = 1111 and id = 2222.
But if I do it like
id_product in ('1111')
and id_product in ('2222')
as a result i get 0 rows returned, where as i want to find invoices that have both products, and not those which have either product 1111 or 2222 or even both :)
thank you for any suggestions!
I have a query something like
select a, b, c from mytable where a=@prmA
If prmA is something like generic all, any, I want this query return value without condition. Is there a way to do this with sql or I should write stored procedure that checks @prmA and all other condition parameters and generate new SQL statement?
Regards,
Hakan
Hi All,
I have stored Candidates Resume in binary(Image) format in database.
I have a search feature to search resume.
For Example:
with all these words: ASP.Net, SQL Server, 2 Years
without these words: Java
Here I get Candidate which CONTAINS("ASP.Net" AND "SQL Server" AND "2 Years" AND NOT "Java")
Now I want to search candidates only
without these words: Java
it means the condition is CONTAINS(NOT Java)
is this possible?
if yes, how?
Thanks in advance.
Hi,
In following query, I use three conditions in WHERE caluse. When I use only CreditUnion.Id=@CreditUnionID
Then I get the right value set. But when I join other two conditions , i get all the values instead of relevant data for that parameter.
Can anyone say why it happenes?
Code Block
SELECT
Member.LastName + ' ' + Member.FirstName AS MemberName, CASE WHEN CuStatus = 'Existing' THEN 'Existing' ELSE 'New' END AS MemberType, EnumCUMembershipStatus.UIText AS Status, CDOrder.DecidedOnCU, SysUserLogon.LastName + ' ' + SysUserLogon.FirstName AS CUDecisionOfficer, 'CD' AS ProductType, CreditUnion.Name
FROM
Member INNER JOIN
CDOrder ON Member.LastCDOrderFK = CDOrder.Id AND Member.Id = CDOrder.MemberFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id INNER JOIN
EnumCUMembershipStatus ON Member.CuStatus = EnumCUMembershipStatus.Name INNER JOIN
SysUserLogon ON CreditUnion.Id = SysUserLogon.CreditUnionFK
WHERE (CreditUnion.Id = @CreditUnionID) AND (Member.CuStatus = 'Approved') OR (Member.CuStatus = 'Declined')
UNION
SELECT
Member_1.LastName + ' ' + Member_1.FirstName AS MemberName,
CASE WHEN CuStatus = 'Existing' THEN 'Existing' ELSE 'New' END AS MemberType, EnumCUMembershipStatus_1.UIText AS Status, LoanApplication.DecidedOnCU, SysUserLogon_1.LastName + ' ' + SysUserLogon_1.FirstName AS CUDecisionOfficer, 'Loan' AS ProductType,
CreditUnion_1.Name
FROM
Member AS Member_1 INNER JOIN
LoanApplication ON Member_1.LastLoanApplicationFK = LoanApplication.Id AND Member_1.Id = LoanApplication.MemberFK LEFT OUTER JOIN CreditUnion AS CreditUnion_1 ON Member_1.CreditUnionFK = CreditUnion_1.Id LEFT OUTER JOIN EnumCUMembershipStatus AS EnumCUMembershipStatus_1 ON Member_1.CuStatus = EnumCUMembershipStatus_1.Name LEFT OUTER JOIN SysUserLogon AS SysUserLogon_1 ON LoanApplication.SysUserLogonFK = SysUserLogon_1.Id AND LoanApplication.SysUserLogonCUFK = SysUserLogon_1.Id AND CreditUnion_1.Id = SysUserLogon_1.CreditUnionFK
WHERE (CreditUnion_1.Id = @CreditUnionID) AND
Member_1.CuStatus = 'Approved' OR Member_1.CuStatus = 'Declined'
I am an ASP.NET Developer I am using two SQL Server databases, 2005 and sql express.I am using a select statement on an IN CONDITION
One table, Table name = SOP10100 resides in a SQL Server 2005 DatabaseThe other table, Table name = ORDER resides on a SQL server express Database
I am writing the following sql statement
SELECT ORDERNO, CARRIER FROM SOP10100WHERE ORDERNO IN ('ORD000234','ORD000384',....)
My question is how many values can I fit on this IN conditionI mean the maximum number of values (upperlimit)
Is there a better way to do this Using ASP.NET ?
Hi This is madhavi
am working with a project with ASP.NET Using VB.NET..
i have requirement that i have to provide the result based on search condition....
First : For Serach i have to search based on given CITY and CATEGORY....
For this i have written a StoredProcedure like:
******************************************************************************************************************
Create PROCEDURE YellowPages_Search(@city nvarchar(50),@SearchWord nvarchar(200),@Name varchar(50) OUTPUT,@CompanyName varchar(50) OUTPUT,@Address varchar(1000) OUTPUT,@PhoneNo varchar(50) OUTPUT,@MobileNo varchar(50) OUTPUT,@Fax varchar(50) OUTPUT,@Email varchar(50) OUTPUT,@WebSite varchar(50) OUTPUT)AS
declare @sql nvarchar(1000)set @sql='select * from YellowPages_Userdetails where city='''+@city + '''and (category like ''%' + @SearchWord + '%'' or subcategory like ''%' + @SearchWord + '%'') '
exec(@sql)
GO
*************************************************************************************************************************************************************************
Now i want to extend this search condition for LOCATION and SUBCATEGORY
means my search condition should include CITY , LOCATION , CATEGORY and SUBCATEGORY
(here the location and subcategory may be given or may not be given)
so please help me out
Thanks in Advance,
Madhavi
i have two tables: "Person" and "Year". "Person" can have many "Year"
(one to many relation). i want a query which returns all the records
from "Person" where "Year" is 2005 but exclude if there is any "Year"
with 2004. how can i write that query? any help will be appreciated.
i did try
<code>
SELECT * FROM Person JOIN Year ON Person.Id = Year.PersonID WHERE Year.Year = 2005 AND Year.Year <> 2004
</code>
but it doesn't seem to work. i want this query to return records from
Person where there is no any year with 2004 but only 2005. If a person
has both 2004 and 2005 exclude that person.
i have two tables A and B with the same fields,
If the id field of table B equals id field in Table A i need to update th edata for that id row.If the id field doesn;t match then i need to insert a new record in tale A for that id
that is i need to perform insertion or updation into table A depending on table B dataCan anyone give me some idea how to start?
I'm trying to make sql that check date in database
Select ... From ....
Where ((id=1) and (port=2) and (logdate=#12/31/2001#));
I'm getting 0 records even if its exist.
I know the problem is in the "logdate=#12/31/2001#"
What is the problem and why the sql ignores it ?
Can we do
Select BookNo as Catalog from Books
where Catalog = 12356
I need to find the way to use alias in "where" for very complex query
Is anyone has way around it ?
Thank you
I have to built a query to get the % for all the Region (Americas, Asia and Europe) from a cube.
But in these regions some countries are excluded and treated seperate.
Like Asia does not include India and Japan.
How do I get the ASIA query using an EXCLUDE condition.
Please help.
Hi,
I have a sql problem I'm trying to solve. I'm selecting from a table based on a foreign key, and the select returns 2 rows. The table has a column called type, and each row for the foreign key has a different type value. Hopefully the example below can help to explain:
Case 1:
PK | FK | Type | Text
--------------------------
1 | 226 | 0 | some text goes here
2 | 226 | 1 | NULL
Case 2:
PK | FK | Type | Text
--------------------------
3 | 334 | 0 | some text goes here
4 | 334 | 1 | actual text I want to select is in this cell
I'm trying to create a select statement to grab the text for the foreign key I'm looking up. In case 2, I want the text where type=1 but in case 1 I want the text where type=0.
I had started writing it as
select text from table where fk=334 and ( (type=4 and text is not null) or type=0 )
but this returns both rows. What I what is something that I think is more akin to
case a || case b
expression in programming - if case a evaluates as true, use that, otherwise evaluate case b and use if true, otherwise return false.
I hope you can understand what I'm trying to get and any suggestions would be much appreciated.
Thanks in advance,
Peter
When using a query in the condition of a while loop, is that query being performed each time?
EX:
While (@X <= (Select count(*) from SOME_TABLE))
Hi,
I am creating a stored procedure which takes a few paramaters. One of which is a string of comma separated codes. At the end of my select query the codes will be used in the where clause.
What I'm doing is parsing the comma separated string and populating a temp table called #codes. So my query will look something like this:
select * from tableA
where tableA.col1 = 'something'
and tableA.code in (select * from #codes)
and....
However, the code paramater can be null and if this is the case I want the query to be called for all codes - i.e. I effectively want to remove the and tableA.code in (select * from #codes) part of the where clause.
Is there any clever way of doin this other than having a if... else... and writing 2 queries - one with the and and one without it?
Hope this is clear.
Thanks,
Wallace
create function quantprice
( @itemnmbr varchar(50), @startdate datetime, @enddate datetime)
RETURNS TABLE
AS
RETURN
(Select distinct t.itemnmbr,t.totalprice as totalcost
from
(
select distinct
vs.itemnmbr, sum(vs.totalsumprce) as totalprice
from vwquantityprice vs
Where vs.itemnmbr = @itemnmbr and (vs.docdate between @startdate and @enddate)
group by vs.itemnmbr
) as t
)
select * from quantityprice('06-5840','4/1/2007','4/1/2008')
well, guys, i have this function and obviously i will get one row from this in output...with that particular itemnumber but i want multi-itemnmbrs some times in output...some times 2..soemtimes 3...
example,
select * from quantityprice('06-5840,ab-4581,0a-1458,45-0945','4/1/2007','4/1/2008')
can you tell me what condition it will come to get this output..
like in where itemnmbr in('06-5840,ab-4581,0a-1458,45-0945')
and in starting input v ariable @itemnmbr..
create function quantprice
( @itemnmbr varchar(50)..
don't know what condition it will come and where i have to put condition in where clause or in input variable..
any help would be appreciated..thanks a lot!! guys plz reply.
Is there a difference if I use filter in the join instead in where clause:
1)
select s.*
from students s
join courses c
on s.ssn = c.ssn
and c.type = 'fresher'
2)
select s.*
from students s
join courses c
on s.ssn = c.ssn
where c.type = 'fresher'
Thanks...
Problem
fldyear fldascending flddecending
2007 20 23
2006 21 14
2007 41 12
2007 12 5
how do i find the average of fld ascending and descending where year=2007
Your help will be appreciated
I have a SP with where condition
as where id=@id and month=@month and Eid=@Eid
What I need is if @Eid=0 i need to display all the records
if Eid>0 then display only that particular reocrd
I tried
where id=@id and month=@month and Eid=
case when @Eid=0 then Eid>0
else
Eid=@Eid
End
But its giving me error
Incorrect syntax near '>'.
Im trying to filter the word starts with SAG,WAG,DGA from the table:version of column versiondescription
tablename:version
versionid versiondescription
********** *******************
1 sag buildagreement
2 wag buildagreement
3 dga buildagreement
My existing query:
Declare @GuildFilter varchar(1000)
declare @Guild varchar(1000)
set @Guild='DGA,WGA'
set @GuildFilter= '['+ replace(@Guild,',','-') +']%'
[code]...
when i try to pass only DGA and WGA,query also picks SGA .
I given my requirement below:
select * from table where (here if account_no = '123456' then name <> 'KING')
Is it possible to have more than one conditions per line? Example below. It works fine if I do this, "When 'M" then 'Yes' But, I am trying to have it to check for more than one. The below example does not work. What can I do to do something like this.
SELECT
FirstName, LastName,
CASE WorkCode
WHEN 'M', 'E', 'F' THEN 'Yes'
WHEN 'C', 'D' THEN 'No'
END
FROM Employees
I need to check groups of records for a condition that doesn't exist in any record in the group.
Example:
Accountno code
1 A
1 C
1 M
1 P
1 Z
If the group does not contain a code 'Z', I want to select the accountno of the group. In the above example, the accountno should not be selected. If none of the records had a code 'Z', the accountno should be selected.
I can't simply say 'where code <> 'Z'. When the system looks at the first record in the above example, it sees that A is not equal to Z and the accountno would be selected. But this is wrong. As there is a 'Z' in the group, the accountno should not be selected.
I've tried using 'top 1' and count. Nothing has worked.
Any ideas?
Hi all
i need simple query
pls help me
table name==>table1
field and value
id|title|topic|oid|posttime====>field(column)
----------------------------------
1 |abab|xxxxxx| 1 |2007-07-21 17:45:39.263===> datas or value
2 |adsd|ssssss| 2 |2007-07-21 16:45:39.263
3 |fdgd|aaaaaa| 3 |2007-07-21 17:40:39.223
4 |jhgd|bbbbbb| 2 |2007-07-21 18:00:09.333
5 |gdgd|ttttbb| 1 |2007-07-23 17:48:09.090
==============================================
i need result for filtering title(field name) and topic(field name) based on posttime(field name) is desc but oid(field name) is asc;
how any query