Where To Set Up Time In SSRS?
Jan 29, 2008I imported access report to sql reporting service. i can see it that report in web server too. However, i have to hit refresh every time. Can you tell me where to set up time in SSRS?
Thanks.
ADVERTISEMENT
Reporting Services :: SSRS Loses Ability To Delegate User Credentials To Database Time To Time?
Apr 30, 2015we have problems with our SQL Reporting Service 2012 (SSRS) server . We have setup Kerberos delegation between SSRS and the database server (SQL Server Always-on cluster) so users are authenticated down to the database. The issue occurs from time to time that SSRS loses the ability to delegate the user credentials to the database. At this point in time the Report Server logs contain rejected database connections because of ANONYMOUS logon. After restarting SSRS the problem is gone.
View 2 Replies View RelatedSSRS Report Time Vs SP Time
May 9, 2008I have a very basic report, pretty much just spits out the results from a storage proceedure. When I just run the stored proceed it takes about 36 seconds to run, and returns 532K records. When i run the report it takes a little over three minutes. The SQL Reporting server is on a seperate box, but its database resides on the same system as the database in which i am reporting up against. Any thoughts on what I could do to improve speeds on the reporting side I would appreciate it. Running SQL 2005 SP2, the report just takes in a date for a parameter and spits out financial holdings for that particular day.
View 5 Replies View RelatedHow To Render One Page At A Time Using SSRS Webservices
Apr 10, 2008I developed a java proxy application for SSRS(Sql Server Reporting services) and able to render the reports by making webservice calls to SSRS webservices. But I am getting the data for the complete report. How can I get only a partial report( like page by page as we get in the Report Manager)? Which parameters should I pass.
As some of the reports are too big, the java application is getting memory issues and I want to limi the data that I get from SSRS.
Appreciate your suggestions.
Query DB2 From SSRS And Convert Integer To Time
Aug 8, 2007Hi,
I am querying DB2 from SSRS. I get an interger back that represents a time like this: HHMMSS
(The data type in DB2 is an integer.) I would like to make this representation of the time display a little more friendly. Does anyone have a good idea on how I can change the query or SSRS format to display semi-colons to break up the hours, minutes and seconds? Also, the other issue is that since I don't get leading zeros back....they probably need to be added to this value if the value is not a full 6 characters.
Format Date/time Field In Ssrs
Jan 9, 2008
hi all
I have two date/time fields as below:
=(Fields!ClosedDate.Value)-(Fields!CreatedDate.Value)
result can sometimes look like this 14:01:42.3840000
how do I format this
I have tried
=FormatDateTime((Fields!ClosedDate.Value)-(Fields!CreatedDate.Value), 2)
but this gives an error
I want the result to look like this
14:01:42.38
thanks
Dianne
Date/time In Page Header -SSRS Layout
Apr 25, 2008Hi
I am new to SSRS
I would like to place time /date in page header
I have like '="Report Time: " & Globals!ExecutionTime'
and also page title
How can i do that
Thanks
Reporting Services :: How To Use IIF Statement And Time Function Together SSRS
Oct 22, 2015I am using the following function to set the time format, however I now need to to add an IF statement into this equation.This is the current expression I am using:
=Floor(Fields!ACD_Calls.Value / 3600) &":"& Format(DateAdd("s", Fields!ACD_Calls.Value, "00:00"), "mm:ss")
Now I need to use the following expression with this:
=IIF(Parameters!ReportType.Value="Average", Sum(Fields!ACD_Calls.Value)/CountRows(), Sum(Fields!ACD_Calls.Value))
How do I join the two together?
SSRS Website Slow When Accessing It The First Time After Inactivity
May 23, 2008The SSRS website is slow when accessing it the first time after a period of inactivity (30 min. or longer). What could be causing this and how can I make it fast all the time.
View 1 Replies View RelatedReporting Services :: SSRS 2012 Login Prompt During Run Time?
Oct 7, 2015SSRS 2012 Login prompt during runtime?I've already did some work arounds that we're posted here but still doesn't solve the login prompt.
View 5 Replies View RelatedHow To Know Number Of Users Hitting A SSRS Report Over A Time Period?
Jan 24, 2008
Hi all,
I want to raise one question which might not relevant to current discussion.
Prob:-- I have some SSRS reports. I want to know for a given time period
1. How many people hit the report.
2. Who are the users hit the report in that time interval.
Is there any query to get that data?
Or,
should I go somewhere to see the data?
NB:- There is not any table in the application which is storing the data
Reporting Services :: How To Convert Int Datatype To Time Format In SSRS
Aug 20, 2015How do we convert int datatype to "time format" like hh:mm:ss
ex:Â Â Â 123092 Â ( this 12Â + 30 min + 92 sec)
      131137  ( 13 + 11 min + 37 sec)
      111747 ( 11 + 17 min + 47 sec)
Reporting Services :: SSRS - Calendar Control With Time Picker
Oct 21, 2015I defined my input parameter as date/time but it doesn't have a time picker where we can accept user input.
The calendar is great but time picker is missing.
Is there any add-in or tweaks I can use to get that feature ?
The alternative solution which uses drop down with some preset values are not feasible for me. All I need is just the time picker similar to adjust time in Windows.
Reporting Services :: SSRS - Display Static Time Range On Y-axis?
Oct 6, 2015displaying time interval on y -axis for an ssrs report.
the values are static... it should start from 00:00 - 23:59 with 00:30 interval....
interval of 30 mins...
I tried several functions that are available but didnt work.
SQL 2012 :: SSRS Report Not Displaying Time Values Correctly From Server Table
Feb 26, 2015I am having problems displaying time values in my SSRS report. below is info. Tried expressions still does not work. I want the values to show what in the SQL Server table 00:00:00.82. I tried stored proc still does not work.
SQL Server table time value shown in milliseconds:
00:00:00.82
Reporting Services report value shown:
00:00:00
Reporting Services :: SSRS- How To Generate Sample Subscription Report Before Scheduling Time
Sep 24, 2015How to achieve by using SSRS. How we can "quick run" report within the subscription menu to ensure report was set up correctly during creation.  Is there any way to generate sample subscriped report without waiting for scheduled time.
I mean whether we can verify the report parameters & data in generated the report. I have verified SSRS report manager .i cant see any button or option to test run the report in subscription feature.
Reporting Services :: Real Time Reporting In SSRS?
Jun 19, 2015We've got a requirement to build the real time report. user can browse report at any point of time and need to see the latest data(stock market) in the report.
I've few options down...
1. Directly point to OLTP database as source and write stored procedure to show result set.
2. Replicate the database and write the SP's to reports. To avoid pointing directly to OLTP db.
3. To build the datawarehouse with dim & facts to show it in reports. I prefer this as a standard method, but this would have some latency depending on trasaction load which will differ from the requirement.
How To Convert UTC Time (retrieved From SQL) To Local Time In Reporting Services Based On Time Zone
Aug 7, 2007
Hi all,
I have created a report in SSRS 2005 which is being viewed by users from different Time Zones.
I have a dataset which has a field of type datetime (UTC). Now I would like to display this Date according to the User Time Zone.
For example if the date is August 07, 2007 10:00 AM UTC,
then I would like to display it as August 07, 2007 03:30 PM IST if the user Time Zone is IST.
Similarly for other Time Zones it should display the time accordingly.
Is this possible in SSRS 2005?
Any pointers will be usefull...
Thanks in advance
sudheer racha.
List Of Parameters Used Together With Rs: Parameter In SSRS 2000 And SSRS 2005
Apr 24, 2007Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
Reporting Services :: Interface Code Compatibility Between Custom Delivery Extension Of SSRS 2008R2 And SSRS 2012?
Sep 3, 2015Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
Can I Write SSRS 2008 Reports To Run On SQL 2005 SSRS?
Sep 12, 2007Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Thanks!
-ErikR
SSRS 2005 - Migrating SSRS Subscriptions
Oct 25, 2007
Hi,
We are in need of migrating SSRS subscriptions along with the reports. Could you please let me know the process ?
I really appreciate your help on this.
Thanks,
Sam
SQL 2012 :: Accurate Sorting Data Each Time With Millions Of Records Without Time Field?
Apr 25, 2014Sample Table
USE [Testing]
GO
/****** Object: Table [dbo].[Testing] Script Date: 4/25/2014 11:08:18 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
It seems to work fine with one million records.
Each primary key is unique, but the begindate is non-unique, and i guess even if i use datetime2 and add nanoseconds, from what i have read, there is a chance that i could have a duplicate datetime since the date is imported via XML from multiple sources.
SQL Server 2014 :: Gathering Stored Procedure Execution Time In Real Time?
Jun 11, 2015Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies View RelatedIntegration Services :: Exclude Time In Date Time Variable In SSIS For Loop?
Oct 22, 2015I am trying to load previous days data at 3 am via a SSIS job.
The Date variable is initiated as DATEADD("dd",-1, GETDATE()) in the for loop.
Now, as this job runs at 3 am, and I set the variable as GETDATE() - 1, it excluded the data from 12 am to 3 am in the resultset as Date is set as YYYY-MM-DD 03:00:00:000 I need this to be set as YYYY-MM-DD 00:00:00:000
How can i do this?Â
Transact SQL :: Update Time Portion Of DateTime Field With Time Parameter
Oct 3, 2015I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
It Takes A Long Time To Insert The First Record Each Time When The Program Start
Dec 15, 2006I am using VS2005 (VB) to develop a PPC WM5.0 Program. And I am using SQLCE 3.0. My PPC Hardware is in 400MHz.
The question is when the program try to insert the first record into sdf database after each time the program started. It takes a long time. Does anyone know why and how can I fix it?
I will load the whole database into a dataset when the program start and do all the "Insert", "Update", "Delete" in this dataset and fill it into database after each action.
cn.Open()
sda = New SqlCeDataAdapter(SQL, cn) 'SQL = Select * From Table
scb = New SqlCeCommandBuilder(sda)
sda.Update(dataset)
cn.Close()
I check the sda.update(), it takes about 0.08s for filling one record into database normally. But:
1. Start the PPC Program
2. Load DB into dataset
3. Create a ONE new record in dataset
4. Fill back to DB
When I take this four steps everytime, the filling time is almost 1s or even more!
Actually, 0.08s is just a normal case. Sometimes, it still takes over 1s to filling back a dataset which only inserted one record when the program is running. (Even all inserted records are exactly the same in data jsut different in the integer key)
However, when I give up the dataset and using the following code:
cn.Open()
Dim cmd As New SqlCeCommand(SQL, cn) ' I have build the insert SQL before (Insert Into Table values(XXXXXXXXXXXXXXX All field)
cmd.CommandType = CommandType.Text
cmd.ExecuteNonQuery()
cn.Close()
StartTime = Environment.TickCount
I found that it is still the same that the first inserted record takes more time, but just about 0.2s. And the normal insert time is around 0.02s. It is 4 times faster!!!
Transact SQL :: Converting 24hrs Time To 12 Hours Time Query Format?
Apr 21, 2015SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
Problem With Getdate() In Transaction Takes The Insert Time Instead Of The Commit Time
Nov 12, 2007Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp €“ all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we don€™t log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table €“ we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
DB Engine :: Time Testing Azure Point In Time Database Restores?
Sep 21, 2015I need to do a time test for restoring an Azure SQL database from a point in time. Can I automate this through PowerShell.
View 3 Replies View RelatedSQL 2012 :: Converting Time String In Temp Table To Military Time Then Cast As Integer?
Dec 26, 2014I need to take a temporary table that has various times stored in a text field (4:30 pm, 11:00 am, 5:30 pm, etc.), convert it to miltary time then cast it as an integer with an update statement kind of like:
Update myTable set MovieTime = REPLACE(CONVERT(CHAR(5),GETDATE(),108), ':', '')
how this can be done while my temp table is in session?
SQL Server 2008 :: Displaying Transaction Time Punch Data In A Time Card Form?
Oct 7, 2015I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
A Time Series Prediction Was Requested With A Start Time Further In The Past Than The Internal Models Of The Mining Model
Feb 19, 2008Hi all,
I have a very simple time series model which processing works fine without any problem. However when I run the following query
SELECT
[TimeSeries].[PriceChange],
[TimeSeries].[Symbol],
PredictTimeSeries(PriceChange, -3, 2)
From
[TimeSeries]
WHERE
[TimeSeries].[Symbol] = 'x'
I get the following error:
TITLE: Microsoft SQL Server 2005 Analysis Services
------------------------------
Error (Data mining): A time series prediction was requested with a start time further in the past than the internal models of the mining model, TimeSeries, specified in the HISTORIC_MODEL_GAP and HISTORIC_MODEL_COUNT parameters can process.
The following is the excerpt of the minding model script related to the two parameters:
<AlgorithmParameters>
<AlgorithmParameter>
<Name>MISSING_VALUE_SUBSTITUTION</Name>
<Value xsi:type="xsdtring">Previous</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_GAP</Name>
<Value xsi:type="xsd:int">1</Value>
</AlgorithmParameter>
<AlgorithmParameter>
<Name>HISTORIC_MODEL_COUNT</Name>
<Value xsi:type="xsd:int">10</Value>
</AlgorithmParameter>
</AlgorithmParameters>
These HISTORIC_MODEL_GAP (1) and HISTORIC_MODEL_COUNT (10) should accommodate PredictTimeSeries(PriceChange, -3, 2). Could anyone shed some light on this?