Why Index Could Be Damaged?
May 31, 2001
we have query
SELECT SUM(T.AmountInput) as AmountTotal
FROM otrnTransaction T
WHERE
IsAutomaticPosting =0
AND (IsCashierAudited = 1 AND IsNightAuditorAudited = 0)
it was ruuning well until yesterday .
Today it just imposible to get result from it.
I run CHECKDB
DBCC results for 'otrnTransaction'.
There are 20067 rows in 384 pages for object 'otrnTransaction'.
...
CHECKDB found 0 allocation errors and 0 consistency errors in database 'BdHydro'
after running DBCC DBREINDEX (otrnTransaction)
the query start working well
What could cause damage to index ?
Thank you
View 3 Replies
ADVERTISEMENT
Oct 17, 2005
Hi,
Please note that I'm having the below problem:
1- when i run "DBcc CheckDB ('DBName') with all_errormsgs"
I Get:
Could not read and latch page (1:173) with latch type SH. sysindexes failed.
2- then :
select * from sysindexes
Gave me:
I/O error (torn page) detected during read at offset 0x0000000015a000 in file 'C:DataDatabasesOld_Data.MDF'.
Connection Broken
3- dbcc checktable ('sysindexes')
Could not read and latch page (1:173) with latch type SH. sysindexes failed.
Server: Msg 8939, Level 16, State 1, Line 1
Table error: Object ID 2, index ID 0, page (1:173). Test (IS_ON (BUF_IOERR, bp->bstat) && bp->berrcode) failed. Values are 2057 and -1.CHECKTABLE found 0 allocation errors and 1 consistency errors in table 'sysindexes' (object ID 2).
Forth of all, I can't use a backup because it is old.
Can i copy system tables from old database to the current one that we are using...
I tried to export and import data from this corrupted database but it would give me errors...
Is there anyway that i can adjust this database.
Please Help Urgently....
View 7 Replies
View Related
Jan 2, 2007
Hi
I recently had a hard disk failure on which was running Win2003 SQL2000 SP4.
This server is a sharepoint backend server, I repaired the disk to the point that it could be mirrored across to a new and then set about looking at the databases. There was a schedule in place to backup all 4 DBs daily, the backup process at no time after verifying the backup had any errors. All but one of the DBs reports this error when I attempt to run DBCC or similar query I/O error (bad page ID) detected during read at offset etc. (error 823) I have restored back to the earliest DBs I have and I still get the same error.
Any ideas on how I can recover as much as possible if not all of the DBs? What is the best way to restore from a transaction log? I have found a few articles on it and they all take a slightly different approach for differnet situations however I'm not entirely sure which applies to me.
All help will be very much appreciated.
Rob
View 1 Replies
View Related
Sep 22, 2005
Hi,
Server drives become faulty and after the recovery of the server the SQL server installation was gone from the system drive. Residing on a different drive, the mdf and ldf files of a database were saved. Unfortunately, when trying to attach the files to a new SQL server installation there is a message 'I/O error (torn page) detected during read at offset 0000000000000000 in file E:SQLServer2KMSSQLDatadb.mdf'.
The available backup files are not restorable returning 'An internal consistency error' upon restoring. So, the hope is with the mdf and ldf files. Does anyone have any idea what can be done specifically with the mdf/ldf files? Any recovery software to be recommended?
Thanks!
AV
View 3 Replies
View Related
Sep 22, 2005
Hi,
Server drives become faulty and after the recovery of the server the SQL server installation was gone from the system drive. Residing on a different drive, the mdf and ldf files of a database were saved. Unfortunately, when trying to attach the files to a new SQL server installation there is a message 'I/O error (torn page) detected during read at offset 0000000000000000 in file E:SQLServer2KMSSQLDatadb.mdf'.
The available backup files are not restorable returning 'An internal consistency error' upon restoring. So, the hope is with the mdf and ldf files. Does anyone have any idea what can be done specifically with the mdf/ldf files? Any recovery software to be recommended?
Thanks!
AV
View 1 Replies
View Related
May 6, 2015
One of my employes deleted a MSSQL Database instead of detach. Now i tried to recover the .mdf and .ldf file but when i trie to attach it it says. "File is not a primary database file"
View 5 Replies
View Related
Jan 1, 2008
I access remote MSSQL Server2005 (SS2005) databse over internet
through SQL Server Management Studio (SSMS) in order to fine tune
ASP.NET website using remote SS2005 database.
Today I could not launch my SSMS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2616564&SiteID=1
Is it possible that remote server machine or SS2005 damaged my SSMS.
Can it be due to some incompatibilities, virus (I have Norton Antivirus locally) or something else?
I do not have much experience with using SS2005 over internet.
Can you share with me possible practical stories or theory on it?
View 3 Replies
View Related
Oct 20, 2006
please explain the differences btween this logical & phisicall operations that we can see therir graphical icons in execution plan tab in Management Studio
thank you in advance
View 3 Replies
View Related
Sep 30, 2015
I am using Full Text Index to index emails stored in BLOB column in a table. Index process parses stored emails, and, if there is one or more files attached to the email these documents get indexed too. In result when I'm querying the full text index for a word or phrase I am getting reference to the email containing the word of phrase if interest if the word was used in the email body OR if it was used in any document attached to the email.
How to distinguish in a Full Text query that the result came from an embedded document rather than from "main" document? Or if that's not possible how to disable indexing of embedded documents?
My goal is either to give a user an option if he or she wants to search emails (email bodies only) OR emails AND documents attached to them, or at least clearly indicate in the returned result the real source where the word or phrase has been found.
View 0 Replies
View Related
Dec 5, 2007
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
View 3 Replies
View Related
Oct 28, 2015
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?
View 2 Replies
View Related
Jan 22, 2006
Keep getting this error when positioning to the last page of a report.
Using Server 2003...SqlRpt Svcs 2000 sp2
Detail error msg:
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown. (rrRenderingError) Get Online Help
Exception of type Microsoft.ReportingServices.ReportRendering.ReportRenderingException was thrown.
Index was out of range. Must be non-negative and less than the size of the collection. Parameter name: index
Anyone have any suggestions? Any way to find out what collection is blowing?...or where parameter name: index comes from?
View 47 Replies
View Related
Jun 20, 2008
hello friends
i have table1 and 200 coulumn of table1 :) i have 647.600 records. i entered my records to table1 with for step to code lines in one day :)
i select category1 category2 and category3 with select code but i have just one index.. it is productnumber and it is primarykey..So my select code lines is so slow.. it is 7-9 second.. how can i select in 0.1 second ? Should i create index for category1 and category2 and category3 ? But i dont know create index.. My select code lines is below.. Could you learn me and show me index for it ?? or Could you learn me and show me fast Select code lines and index or etc ??? Also my search code line have a dangerous releated to attaching table1 with hackers :)
cheersi send 3 value of treview1 node and childnode and child.childnode to below page.aspx :)
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Not Me.IsPostBack Then
If Request("TextBox1") IsNot Nothing ThenTextBox1.Text = Request("TextBox1")
End If
If Request("TextBox2") IsNot Nothing ThenTextBox2.Text = Request("TextBox2")
End If
If Request("TextBox3") IsNot Nothing ThenTextBox3.Text = Request("TextBox3")
End If
End If
Dim searchword As String
If Request("TextBox3") = "" And Request("TextBox2") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "'"
End If
If Request("TextBox3") = "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "'"
End If
If Request("TextBox3") <> "" And Request("TextBox2") <> "" And Request("TextBox1") <> "" Then
searchword = "Select * from urunlistesi where kategori= '" & Request("TextBox1") & "' and kategori1= '" & Request("TextBox2") & "' and kategori2= '" & Request("TextBox3") & "'"
End If
SqlDataSource1.SelectCommand = searchword
End Sub
View 11 Replies
View Related
Jul 9, 2004
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
View 3 Replies
View Related
Jul 3, 2006
Hi everyone,
When we create a clustered index firstly, and then is it advantageous to create another index which is nonclustered ??
In my opinion, yes it is. Because, since we use clustered index first, our rows are sorted and so while using nonclustered index on this data file, finding adress of the record on this sorted data is really easier than finding adress of the record on unsorted data, is not it ??
Thanks
View 4 Replies
View Related
Mar 5, 2015
I have a clustered index that consists of 3 int columns in this order: DateKey, LocationKey, ItemKey (there are many other columns in this data warehouse table such as quantities, prices, etc.).
Now I want to add a non-clustered index on just one of the other columns, say LocationKey, like this:
CREATE INDEX IX_test on TableName (LocationKey)
I understand that the clustered index keys will also be added as key columns to any NC indexes. So, in this case the NC index will also get the other two columns from the clustered index added as key columns. But, in what order will they be added?
Will the resulting index keys on this new NC index effectively be:
LocationKey, DateKey, ItemKey
OR
LocationKey, ItemKey, DateKey
Do the clustering keys get added to a NC index in the same order as they are defined in the clustered index?
View 1 Replies
View Related
Jun 18, 2008
Quick question about the primary purpose of Full Text Index vs. Clustered Index.
The Full Text Index has the purpose of being accessible outside of the database so users can query the tables and columns it needs while being linked to other databases and tables within the SQL Server instance.
Is the Full Text Index similar to the global variable in programming where the scope lies outside of the tables and database itself?
I understand the clustered index is created for each table and most likely accessed within the user schema who have access to the database.
Is this correct?
I am kind of confused on why you would use full text index as opposed to clustered index.
Thank you
Goldmember
View 2 Replies
View Related
Sep 10, 2007
Hi All,
I 'm working to improve some sql performance.
One of the major syntax inside the SELECT statment is ..
WHERE FIELDA IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='A') AND
WHERE FIELDB IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='B') AND
WHERE FIELDC IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='C') AND
WHERE FIELDD IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='D') AND
WHERE FIELDE IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='E') AND
WHERE FIELDF IN (SELECT PARAVALUE FROM PARATABLE WHERE SESSIONID = "XXXXX" AND PARATYPE='F')
(It's to compare the field content with some user input parameter inside a parameter table... )
I think properly is that the SELECT ... IN is causing much slowness in the sql statement. I have indexed FIELDA , FIELDB, FILEDC etc and those PARAVALUE and PARATYPE in the PARATABLE table. But perfromance is still slow and execution takes >20 seconds for 200000 rows of records.
Do any one know if still any chance to improvide the performance like this?
Much Thanks,
Andy
View 14 Replies
View Related
Apr 17, 2007
I'm trying to find whether there is a dmv or system view that can help me see the last time an index was rebuilt or created. Assuming I rebuilt an index using tsql commands (not a job with a history), is there a way to find out the last time that index was rebuilt?
Thanks much.
View 6 Replies
View Related
Mar 1, 2004
I have a really strange problem.
I execute this query:
declare @cid int
set @cid = 2003227
select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid
select * from sales s, product p where p.product_Id = s.product_Id and customer_id = @cid or @cid = 0
3 Million rows in sales, 120000 in product.
The first does and index seek, the second an index scan.
The execution plan reports that the scan takes 99.87% of the cost, and the seek takes 0.13%
This problem obviously gets worse the bigger the dataset / query /etc.
The reason I query this, is because it never used to take this long to do index scans. Is there something i can change, something i can fix?
Any help would be appreciated.
Josh
View 2 Replies
View Related
Mar 18, 2008
Hi,
I just want to know whether any advantage or disadvantage
in doing Reorganize Index And Rebuild Index ....
Plz do comment on this ASAP !!!!
Thanks in advance
Regards
Arv
View 1 Replies
View Related
Mar 18, 2008
Hi,
I just want to know whether any advantage or disadvantage
in doing Reorganize Index And Rebuild Index ....
Plz do comment on this ASAP !!!!
Thanks in advance
Regards
Arv
View 6 Replies
View Related
Apr 1, 2006
Hello I want to learn disparity clustered index or nonclustered index and in queries which one run better.
example
select * from orders where orderID=5
to this query clustered or nonclustered
thanks
View 3 Replies
View Related
Nov 14, 2006
the query:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
takes 30-60 seconds to run on my machine, due to a clustered index scan on our an index on asset [about half a million rows]. For this particular association less than 50 rows are returned.
expanding the inner select into a list of guids the query runs instantly:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
'0F9C1654-9FAC-45FC-9997-5EBDAD21A4B4',
'52C616C0-C4C5-45F4-B691-7FA83462CA34',
'C95A6669-D6D1-460A-BC2F-C0F6756A234D')
It runs instantly because of doing a clustered index seek [on the same index as the previous query] instead of a scan. The index in question IX_Asset_AssociationGuid is a nonclustered index on Asset.AssociationGuid.
The tables involved:
Asset, represents an asset. Primary key is AssetGuid, there is an index/FK on Asset.AssociationGuid. The asset table has 28 columns or so...
Association, kind of like a place, associations exist in a tree where one association can contain any number of child associations. Each association has a ParentAssociationGuid pointing to its parent. Only leaf associations contain assets.
AssociationDataAssociation, a table consisting of two columns, AssociationGuid, DataAssociationGuid. This is a table used to quickly find leaf associations [DataAssociationGuid] beneath a particular association [AssociationGuid]. In the above case the inner select () returns 3 rows.
I'd include .sqlplan files or screenshots, but I don't see a way to attach them.
I understand I can specify to use the index manually [and this also runs instantly], but for such a simple query it is peculiar it is necesscary. This is the query with the index specified manually:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WITH (INDEX (IX_Asset_AssociationGuid)) WHERE
a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
To repeat/clarify my question, why might this not be doing a clustered index seek with the first query?
View 15 Replies
View Related
Jun 29, 2004
Found out a while back that my facts-tabel has an non-clustered index on its facts_id. In a bunch of procedures an update is executed against a facts_id unfortunately on it's facts-table. I was wondering if changing it into a clustered index is worth the effort / would make sense considering a +110 million facts and re-indexing the other indexes as well? Facts are loaded sequentially, so I would suspect them facts are in the ordered already?
thanx,
View 3 Replies
View Related
Oct 4, 2007
Hey,
what is the difference between Table Scan und Index Scan?
I find no difitions in the internet
Finchen
View 5 Replies
View Related
Sep 21, 2007
Hi,
I want to know wht is a
TABLE SCAN
INDEX SCAN
INDEX SEEKand When they are used, Wht is the difference between all these.????
View 5 Replies
View Related
Oct 15, 2007
Hi everybody!
I just ran the Database Engine Tuning Advisor on a relative complex query to find out if a new index might help, and in fact it found a combination that should give a performance gain of 94%. Fair enough to try that.
What I wonder about: The index I should create contains 4 columns, the last of them being the Primary Key column of the table, which is also my clustered index for the table. It is an identity integer btw.
I think I remember that ANY index does include the clustered one as lookup into the data, so having it listed to the list of columns will not help. It might at worst add another duplicate 4 bytes to each index entry.
Right? Wrong? Keep the column in the index, or remove it since it is included implicit anyway?
Thanks for suggestions!
Ralf
View 3 Replies
View Related
Jun 27, 2001
Hello List,
I've couple of tables in my database. I created some clustered indexes and non-clustered indexes on these tables. But surprisingly, When I run sp_helpindex table_name, I see a lot of indexes starting from WA_ name. I dont know, what are these indexes and I believe, I havent created them.
Would like to know, how does these got created and is it appropriate to delete them?
Please advice
Thanks in advance
Sindi
View 4 Replies
View Related
Aug 1, 2001
I have table pcCode
sp_help pcCode
Column_name
-----------
ID_Code
CodeType
ID_Property
ID_Reference
Name
ShortName
ViewOrder
ParentType
Status
index_description index_keys
------------------------------------------------------------------------------clustered, unique, primary key located on PRIMARY ID_Code
nonclustered, unique key located on PRIMARY ID_Property, CodeType, ShortName
Now
if I do
select Status from prcode where ID_Property = 7
Will SQl server use index created on 3 columns (becouse ID_Property first in the index )
or I need another index on ID_Property column only
Thanks
View 5 Replies
View Related
Sep 7, 2001
This index "_WA_Sys_title_318258D2" was auto created by the system (nonclustered, statistics, auto create located on Primary). If I want
it remove will I have to drop the table because the command Drop index...
doesn't remove it, the message "because it does not exist in the system catalog." will come up and were can I turn of the command so it won't be create by the system ?
View 3 Replies
View Related
Sep 9, 2001
I want to know how to do the indexing or updating indexing in
Sql Server Ver.6.5
Thanks
selvam
View 1 Replies
View Related
Sep 27, 2001
My question:- There is a join between tableA and tableB by a clustered index. Now, you are moving tables to a new database. You want to increase the performance of queries made by join.How?
A..Create two filegroups FGA and FGB on separate disk. Place TA and its indexes on FGA, TB and its indexes on FGB
or
B. Create three filegroups FGA, FGB, FGC on three separate disks. Place TA on FGA, TB on FGB, and index of two table on FGC
Thanks
shica
View 1 Replies
View Related
