I have a win2k3 server that i am going to need to upgrade to service
pack 2. It is running sql server 2000(sem reports version 8.0 - i
think that is sql server 2000). It has profiler and query analyzer
running as well. Are there any caveats i need to be concerned about
before installing win2k3 sp2 on a server with sql server 2000. Thanks
I am using Windows 2003 Server English Version. I wanna store the big-5data so I install the sql server 2000 as if i install it in the Windows2000 with Server Collation of the Chinese_Taiwan_Stroke_CL_AS.However, the data are stored into the database server in unicodeinstead of big-5 in that of windows 2000 OS.I would like to ask how i can set so that the Sql Server 2000 can storethe big-5 data
View 6 Replies View RelatedDoes anyone know where to find a comprehensive step by step build document for clustering SQL2000 on win2k3
View 3 Replies View RelatedHey there I am an SQL noob, our bank has no real SQL Admin, we had onw that left but never had a good knowledge transfer. We have 2 SQL servers clustered. IBSQL1 and IBSQL2 they make up cluster IBSQL. We have 2 other servers IBIIS1 ans IBIIS2 and we noticed when installing apps on them that they could not see the database. Yet it can ping IBSQL. The problem is on IBSQL1 and 2 port 1433 is not listening or open. Thus on IBSQL it isn't either of course. I have read of all kinds of people having this issue and most have said you need to manually add a connection string "Provider=sqloledb;Data Source=machineName,1433;Initial Catalog=xx;User ID=xx;Password=xx" Problem is I do not know how to add a connection string.
I need step by step instructions since im new to this. Start/programs/etc..... Apparently it is not enough to open the properties of tcp/ip in the config util and say 1433. You need to reenforce it by adding that string.
As it stands I cannot "telnet ibsql 1433" it tells me to take a hike basically.
So is the connection string the likely cause? or could it be something simpler? Thanks in advance.
For a SQL/2005 DB Server do I need the /3GB switch or not? I will have IIS running on the server; however, it won't be doing very much as the SQL Database is the main thing:
Windows 2003 R2 Enterprise w/16 GIG RAM 4 CPU (Virtual Machine)
SQL/2005 Enterprise Edition
Hardware: Dell Server 8 CPU w/32 GIG RAM running VM ESX V3
I know I need the /PAE switch to utilize Memory over 4 GB - the question is do I need the /3GB switch along with the /PAE switch?
DeWayne
Hi all,I have MSDE installed on an HP server as some of the utilities requireda database. I have also subsequently installed SQL 2000 onto thisserver which is a windows 2003 box. I know it complains at the startof the installation but I was under the impression that it would stillwork ok, especially with SP3 applied.I have tried to apply SP3 but it tells me that it is not a SQL2000instance ad setup will exit?Also I have noticed that in the directory structure it has used thedollar sign i.e. mssql$machinename its the same in Enterprise Manager\machinename$InstanceName. Whats that all about? Its not like that onany other server!My plan is to uninstall sql 2k, uninstall HP apps and MSDE andreinstall SQL 2k. Can anyone explain the above though?ThanksGary
View 2 Replies View RelatedWe are planning a SQL Server 2005 install on VMware ESX, as thebackend to a Sharepoint Services 3.0 web front end..Do I gain anything at all by installing SS 2005 on Win2k3 ENTERPRISEas the OS instead of Standard??Thank you, Tom
View 1 Replies View RelatedI am attempting to install MS SQL 2000 SP2 on a Windows Server 2003 Enterprise SP1 box. The only installer I can find on the disc is in the MSDE directory and when I run it it immediately gives me this error:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package."
I have tried copying the install files to my local hard drive for install, I have checked the version of my Windows Installer (3.1.4000.1840). I have the SP4 updates ready to go once it's installed, but I just cannot get past that point. I know that the same software version has been installed on other Windows 2003 systems, so why would it have a problem on this one machine?
Thanks
Hello All and Happy New Year (I believe that is still allowed by the PC police?!)
Has anyone experienced performance problems (i.e. processes taking a lot longer to connect to the database server) after appyling Windows Server 2003 SP2 to a server that was previously running Windows Server 2003 RTM? The version of SQL Server (2000 SP4) has not changed between OS Service Packs.
To set the scene, we upgraded one node of a cluster to Win2K3 SP2 intending to upgrade the other node the following night if no problems were encountered. However, after failing over to the patched node we experienced something akin to a Denial Of Service attack whereby connections were gradually refused until even existing connections were kicked out.
We resolved that issue by disabling the SynAttackProtect Registry key (details http://support.microsoft.com/default.aspx?scid=kb;en-us;899599), but although connections are no longer being refused they are taking a lot longer, e.g. opening a Query Analyzer window now takes several seconds to connect to the database. The actual time taken by the database engine to execute sql queries has not increased, but is perceived by the users as having done so because of the time taken to return results.
I asked our server team to run diagnostics against both nodes and they found no problems and no differences apart from the OS service pack level.
I am about to reopen the case I logged with Microsoft, but thought I'd see if you guys had experienced anything similar.
Thanks and regards
Lempster :confused:
Microsoft Security Paradigmes are Irritating. I sure they're fine onceyou know what they are, but for the uninitiated it's quitecounterintuitive to work with.I moving an old SQL Server-backend-IIS5/ASP-frontend application toservers with windows 2003 standard edition. One server will run thedatabase the other will run IIS 6.0. Note that i haven't set-up adomain, which i think requires one machine to be domain controllerwhich would decrease performance and stuff. I've simply put them on thesame group.I wan't to restrict access the sql server so only the incommingconnection from the webserver is allowed. I can use either namedpipes(which should be the fastest protocol) or tcpwhich should beslight slower than named pipes) but i seem to have a problem. If I usenamed pipes to connect the IUSR(the user under which IIS is running)must have access-rights to IPC$ share on the sql server. I can't seemto set any access-right directly for IPC$ share, but i can reactivatemy guest user and then it works, everyone can now access the ipc$ shareso it's not really what i'm looking for.I can also connect through TCP( and set up some kind of filter onlyallowing incomming connections on port 1433 from the ip of the webserver.But i don't know how to do this. I've taken a look at the IPSec stuffbut it's all about kerberos authentication and other bull which i don'tthink i need. What i need is simply a ip traffick filter, which doesnothing else but reject incomming connection from all other ip's thanmy webserver.My question is how do I do this? Do i need to have a addtitíon"firewall" service running and if so why, how much extra overhead willthis create for the server. Alternately, is it possible to change theaccess right for the IPC$ share manually?Thanks in advance for any input you might have on this?Regs Jens
View 2 Replies View Related
Hi,
I am currently working on with the ASP encryption of my application. I've tried to test the encryption of the connection string using the capicom.dll in my local, and it works successfully. However, I am not quite sure if this will still work after my OS is upgraded to WIN2K3 (my current OS is WINXP). Will this dll component be impacted after the OS Upgrade? or will there be no impact at all?
Any inputs from you guys would be much appreciated.
Thank you.
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Hi All,
View 14 Replies View RelatedHi,
View 36 Replies View RelatedWhen I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies View RelatedWhen I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
My site works fine in VWD2008 express, but I get this error when I try to use it on my live website.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
According to this article: http://support.microsoft.com/kb/914277 I am supposed to:
1.
Click Start, point to Programs, point to Microsoft SQL Server 2005, point to Configuration Tools, and then click SQL Server Surface Area Configuration.
Ok, there is no such program in this folder. The only thing in there is "SQL Server Error and Usage Reporting"...
The other thing I am greatly concerned with is this: All is want is for my webpages to be able to access my database for user authentication. I DO NOT want to grant the internet rights to remote connect to my database.
Hi All,
Please some one help me...
I have to insert a csv into one table in sql server. But the problem is the file is in one server and SQL SERVER 2005 is in other server..
how do i insert the file....
please help me.....
Hi Guys,
I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!)
Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing.
A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005.
So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon.
My questions are:
Where can I find the SQL Server Manager executeable?
Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.)
Thanks very much for your help.
Regards
Gary
Hi,Is it possible to install on a Windows server 2003,SQL SERVER 2000 in the folowing configuration :SQL server 7.0 as a default InstanceandSQL server 2000 as a named instance.Thanks for your answer.
View 1 Replies View RelatedHi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
Hello,
I have an intranet environment consists of two servers:
- An application server windows 2003 server with 64-bit server Sharepoint 2007 SP1 (Standard version for search)
- A database server windows 2003 server with 64-bit SQL Server 2005 SP2 64-bit (Standard - 9.0.3054)
It happens regularly that the database server crash (frozen black screen) while the application server indexes (crawl) the content of the intranet site based on sharepoint. There is no alert / error in the observer of events, nor in the sql logs.
The crash is uncertain: dice once all goes well, soon after that crash. When i set the parameter search service (service management research), I can define a regulatory impact of the robot to change the number of documents at the same time : "Request 2 documents at the same time, the crash is more rare, "ask 64 documents at a time, the crash is more common.
My Intranet under sharepoint is composed of a collection site with a dozen sub-sites. There are 3 large library of PDF document. All done in the 4 go in terms of volume.
My problem for about 3-4 months. (Maybe more. Before, indexing was not yet in place).
Someone could help me? Thank you
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
Hi all,
Please tell me about difference between SQL Server 2005 and SQL Server 2008 SSRS(Sql Server report)
Why to upgrade for Sql Server 2008
Thanks,
Ashok
I have a Sybase Adaptive Server Enterprise server which I need to set up as a linked server in SQL Server 2005. The Sybase server is version 12.5.2, and the Sybase ODBC driver version is 4.20.00.67. I have already installed the Sybase client software on the server.
I also created a SystemDSN on the SQL Server to connect to the Sybase server. I tested the connection and it was able to connect.
I ran the following code to create the linked server:
<code>
EXEC master.dbo.sp_addlinkedserver @server = N'LinkedServerName', @srvproduct=N'Sybase', @provider=N'MSDASQL', @datasrc=N'Sybase System DSN', @provstr=N'"Provider=Sybase.ASEOLEDBProvider;Server Name=servername,5000;Initial Catalog=databasename;User Id=username;Password=password"'
</code>
I then ran sp_tables_ex to make sure I could view the tables in the Sybase database. Here is the error message I get:
<code>
OLE DB provider "MSDASQL" for linked server "LinkedServerName" returned message "[DataDirect][ODBC Sybase Wire Protocol driver]Error parsing connect string at offset 13. ".
Msg 7303, Level 16, State 1, Procedure sp_tables_ex, Line 41
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "LinkedServerName".
</code>
Any ideas what is happening here?