Working Since Morning, Simple Error But Unable To Resolve, ERROR : 26 , Please Help
Dec 15, 2006
dear friends,
i started using Asp.net for developing webparts, web parts automatically connect to a database to be created and saved in the database.
i had already Sql Server 2005 Express Edition installed so my webpart page ran and automatically created the database "AspNetDb" in the "App_Data" folder.
but when i uninstalled Sql Server 2005 Express Edition and then installed the Sql Server 2005 Enterprise Edition, it gave me the following Error 26 as below :
--------------------------------------------------------- Beginning of Error Message --------------------------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
--------------------------------------------------------- End of Error Message --------------------------------------------------
then when i checked the Machine.config file, i found this....
<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
then i thought it's becoz, of the datasource thing that the Machine.Config file supports by default the default free edition of Sql Server 2005 which is the Sql Server 2005 Express Edition.
but friend in my company we use Sql Server 2005 Enterprise Edition, so can anybody pls guide me and get me out of this soup on helping me to use Sql Server 2005 Enterprise Edition by modifying either 1) Machine.Config File and/or 2) Web.Config file and/or 3) any other way, but please help i want to do this, please......
regards and thanks
Gurjit Singh
View 2 Replies
ADVERTISEMENT
Feb 5, 2006
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database:
NOTE: In my database I have create the user “teeluk12� and a role “members�
aspnet_UsersInRoles_AddUsersToRoles "/", "teeluk12", "members", "5/02/2006 4:44:33 pm"
Once again the code is working on my home computer but not on the server. On the server I'm getting the following error:
Server: Msg 446, Level 16, State 9, Procedure aspnet_UsersInRoles_AddUsersToRoles, Line 76
Cannot resolve collation conflict for equal to operation.
Does anybody know what could cause the error?
Could it be some permissions that I didn't set on my server?
Thanks for my help and suggestions...
Regards,
Gonzal
View 9 Replies
View Related
Oct 23, 2007
Every time I try to add a new row to my table, i get this error which i don't now what it means and how i can correct it, could you please advice. i am using VS 2005 and VB Language
**************The error message
"No row was updated.
The data in row 2 was not committed.
Error source:mscorlib.
Error Message: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"
View 3 Replies
View Related
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this?
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GO
Thanks
View 2 Replies
View Related
Dec 19, 2013
while using store procedure in report getting error as mentioned below.
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 1 Replies
View Related
Dec 12, 2007
Hello,
I have a distributed query that uses tables located on in SQL Server 2005 and SQL Server 2000? Does anyone know how I can fix the error below?
Thanks a lot for help!
Msg 468, Level 16, State 9, Line 1
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 13 Replies
View Related
May 21, 2007
I'm getting the following errors when trying to execute the following script on the server, its part of the standard asp.net membership and roles, anybody have any ideas how I get get round this? Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 50
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 58
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 84
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
Msg 468, Level 16, State 9, Procedure aspnet_UsersInRoles_RemoveUsersFromRoles, Line 92
Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.
/****** Object: StoredProcedure [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles] Script Date: 05/20/2007 11:23:33 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER OFF
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]') AND type in (N'P', N'PC'))
BEGIN
EXEC dbo.sp_executesql @statement = N'
CREATE PROCEDURE [dbo].[aspnet_UsersInRoles_RemoveUsersFromRoles]
@ApplicationName nvarchar(256),
@UserNames nvarchar(4000),
@RoleNames nvarchar(4000)
AS
BEGIN
DECLARE @AppId uniqueidentifier
SELECT @AppId = NULL
SELECT @AppId = ApplicationId FROM aspnet_Applications WHERE LOWER(@ApplicationName) = LoweredApplicationName
IF (@AppId IS NULL)
RETURN(2)
DECLARE @TranStarted bit
SET @TranStarted = 0
IF( @@TRANCOUNT = 0 )
BEGIN
BEGIN TRANSACTION
SET @TranStarted = 1
END
DECLARE @tbNames table(Name nvarchar(256) NOT NULL PRIMARY KEY)
DECLARE @tbRoles table(RoleId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @tbUsers table(UserId uniqueidentifier NOT NULL PRIMARY KEY)
DECLARE @Num int
DECLARE @Pos int
DECLARE @NextPos int
DECLARE @Name nvarchar(256)
DECLARE @CountAll int
DECLARE @CountU int
DECLARE @CountR int
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@RoleNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @RoleNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@RoleNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@RoleNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbRoles
SELECT RoleId
FROM dbo.aspnet_Roles ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredRoleName AND ar.ApplicationId = @AppId
SELECT @CountR = @@ROWCOUNT
IF (@CountR <> @Num)
BEGIN
SELECT TOP 1 N'''', Name
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT ar.LoweredRoleName FROM dbo.aspnet_Roles ar, @tbRoles r WHERE r.RoleId = ar.RoleId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(2)
END
DELETE FROM @tbNames WHERE 1=1
SET @Num = 0
SET @Pos = 1
WHILE(@Pos <= LEN(@UserNames))
BEGIN
SELECT @NextPos = CHARINDEX(N'','', @UserNames, @Pos)
IF (@NextPos = 0 OR @NextPos IS NULL)
SELECT @NextPos = LEN(@UserNames) + 1
SELECT @Name = RTRIM(LTRIM(SUBSTRING(@UserNames, @Pos, @NextPos - @Pos)))
SELECT @Pos = @NextPos+1
INSERT INTO @tbNames VALUES (@Name)
SET @Num = @Num + 1
END
INSERT INTO @tbUsers
SELECT UserId
FROM dbo.aspnet_Users ar, @tbNames t
WHERE LOWER(t.Name) = ar.LoweredUserName AND ar.ApplicationId = @AppId
SELECT @CountU = @@ROWCOUNT
IF (@CountU <> @Num)
BEGIN
SELECT TOP 1 Name, N''''
FROM @tbNames
WHERE LOWER(Name) NOT IN (SELECT au.LoweredUserName FROM dbo.aspnet_Users au, @tbUsers u WHERE u.UserId = au.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(1)
END
SELECT @CountAll = COUNT(*)
FROMdbo.aspnet_UsersInRoles ur, @tbUsers u, @tbRoles r
WHERE ur.UserId = u.UserId AND ur.RoleId = r.RoleId
IF (@CountAll <> @CountU * @CountR)
BEGIN
SELECT TOP 1 UserName, RoleName
FROM @tbUsers tu, @tbRoles tr, dbo.aspnet_Users u, dbo.aspnet_Roles r
WHERE u.UserId = tu.UserId AND r.RoleId = tr.RoleId AND
tu.UserId NOT IN (SELECT ur.UserId FROM dbo.aspnet_UsersInRoles ur WHERE ur.RoleId = tr.RoleId) AND
tr.RoleId NOT IN (SELECT ur.RoleId FROM dbo.aspnet_UsersInRoles ur WHERE ur.UserId = tu.UserId)
IF( @TranStarted = 1 )
ROLLBACK TRANSACTION
RETURN(3)
END
DELETE FROM dbo.aspnet_UsersInRoles
WHERE UserId IN (SELECT UserId FROM @tbUsers)
AND RoleId IN (SELECT RoleId FROM @tbRoles)
IF( @TranStarted = 1 )
COMMIT TRANSACTION
RETURN(0)
END
'
END
GOAny help appreciated thanks,
View 5 Replies
View Related
Sep 2, 2004
Exception information:System.Data.SqlClient.SqlException: Cannot resolve collation conflict for equal to operation.
Who can tell me how to resolve this problem?
Thx
View 3 Replies
View Related
Dec 8, 2014
I am practicing on vmware 2 node failover cluster for doing Sql failover clustering understanding.I did proper Ad Dc setup and configured san storage through iscsi software that I downloaded from net.I did target and initiator configuration for san storage on same Domain controller vm.Name of target is Target1 and has two initialtor for node1 and node2.It has two virtual disk assigned Quorumdisk.vhd and sqldisk.vhd.ON vmnode1 I have initialzed and formatted my both disk with proper volume and label.
Node which are participating in cluster are node1 and node2.while my windows clustering went fine,while Sql server installation on node 1,i got error IP Address conflict occured.
my DC has IP address:192.168.1.10
my Node1 is 192.168.1.20
node2:192.168.1.30
Cluster IP address is 192.168.1.35
What has cause this situation.What configuration is needed.How do I troubleshoot this problem as now I can not install my sql for clustering as also gave me Invalid network name error.Is my storage configuration not proper or IP address is in correct?Do I need to put my virtual disk in Clustered shared volume?
View 2 Replies
View Related
Dec 19, 2013
While using store procedure in report getting error as mentioned below !
Cannot resolve the collation conflict between "Latin1_General_CI_AI" and "SQL_Latin1_General_CP1_CI_AS" in the equal to operation.
View 2 Replies
View Related
Apr 15, 2007
Now I need to synchonize the data in Pocket PC to the remote sql server database.
I have configured the publication and the virtual directory in the server. When the Pocket PC directly connects to the server (that to say, the Pocket PC connects to the server through the ActiveSync), the data can be synchronized successfully. But when the Pockec PC connects to another computer () through the ActiveSync (this computer connects to the server through the network), the data cannot be synchronized. But when I run the application in the emulator in the same computer, the data can be synchonized with the server.
using the following codes, the error message is:
Error Code: 80004005
Message:
Minor Err: 28017
Source: Microsoft SQL Server 2005 Mobile Edtion.
private void ShowErrors(SqlCeException ex)
{
SqlCeErrorCollection oErrors = ex.Errors;
StringBuilder oStrBld = new StringBuilder();
Exception oInner = ex.InnerException;
foreach (SqlCeError oErr in oErrors)
{
oStrBld.Append("Error Code: " + oErr.HResult.ToString("X"));
oStrBld.Append("Message : " + oErr.Message);
oStrBld.Append("Minor Err.: " + oErr.NativeError);
oStrBld.Append("Source : " + oErr.Source);
foreach (int iNumPar in oErr.NumericErrorParameters)
{
if (iNumPar != 0)
oStrBld.Append("Num. Par. : " + iNumPar);
}
foreach (String sErrPar in oErr.ErrorParameters)
{
if (sErrPar != String.Empty)
oStrBld.Append(" Err. Par. : " + sErrPar);
}
MessageBox.Show(oStrBld.ToString(), "SqlCeException");
oStrBld.Remove(0, oStrBld.Length);
}
}
The environment is:
Client:
Sql mobile (sql ce 3.0)
Server:
windows 2003 server
sql server 2000 with sp4
IIS 6
And I'm quite sure the virtual directory is correct.
Any body can help me? It's urget for me, thanks in advance.
View 3 Replies
View Related
May 14, 2008
Hi,
When I try to execute a package I get this following error. I have a bunch of similar packages which runs fine on the same source(sybase) and destination(sqlserver 2005), just different tables. Only few of them fails and all of them have the same error of "Unable to resolve column level collations. Bulk-copy cannot continue". I checked for the dtatatype and length between source and destination, both are same. The user have all the required rights on the objects in both source and destination.
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to resolve column level collations. Bulk-copy cannot continue.".
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: Failed to open a fastload rowset for "testdb..tbl2". Check that the object exists in the database.
On further trial and error I found that if I remove the fast load option, it works without glitch.
Its kind of wierd though....
Any body has faced this situation?
Thanks
Karunakaran
View 5 Replies
View Related
May 13, 2008
Hi,
When I try to execute a package I get this following error. I have a bunch of similar packages which runs fine on the same source(sybase) and destination(sqlserver 2005), just different tables. Only few of them fails and all of them have the same error of "Unable to resolve column level collations. Bulk-copy cannot continue". I checked for the dtatatype and length between source and destination, both are same. The user have all the required rights on the objects in both source and destination.
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unable to resolve column level collations. Bulk-copy cannot continue.".
Error at Data Flow Task For Test1 - test_tbl_job [OLE DB Destination [16]]: Failed to open a fastload rowset for "testdb..tbl2". Check that the object exists in the database.
Some body can shed light on this?
Thanks
Karun
View 6 Replies
View Related
Dec 20, 2006
First Error:
I am currently trying to get my reporting services to run on a site other than the default website... on my test server are three sites listed in my IIS: Default Web Site, Microsoft Share Point Administration, and Data Test Site.
My ReportingServer and Reports directories run fine in my Local Web Site but when i add the Directories to my Data Test Site only the Reports Directory runs... the ReportServer does not run and gives me :
You are not authorized to view this page
You might not have permission to view this directory or page using the credentials you supplied.
If you believe you should be able to view this directory or page, please try to contact the Web site by using any e-mail address or phone number that may be listed on the 192.168.1.249 home page.
You can click Search to look for information on the Internet.
HTTP Error 403 - Forbidden
Internet Explorer
Second Error:
I was trying to fix the problem above and i do not think i changed anything i was just looking through the settings between the two sites and somehow this error came up:
Error
The underlying connection was closed: Unable to connect to the remote server.
Home
I am not sure what i did or if i even did anything i was just looking through the settings. compairing the two sites and now i get the error above.
View 1 Replies
View Related
Jun 5, 2007
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
View 4 Replies
View Related
May 7, 2008
I'm using sql server 2005 and in sql management studio I am getting a syntax error from this simple below code:
WITH CustListTemp AS
(SELECT OrderID, Locked, OrderStatus, Resubmissions, ROW_NUMBER() OVER (ORDER BY OrderID) AS RowNumber
FROM dbo.OrderInfo
)
Can somebody please tell me what ther error is so I can correct it? I even had someone at work take a look at it and couldn't get it either.
View 4 Replies
View Related
Dec 11, 2003
I have a multi-step DTS package that I get the following error when I try to execute it:
Package Error
Error Source : microsoft ole db provider for sql server
Error Description : [DBNETLIB][ConnectionOpen (connect()).]SQL Server does not exist or access denied
Am I missing something obvious? I'm sure it is something simple but I can't seem to get it. Thank you in advance for you assistance.
View 1 Replies
View Related
Jul 20, 2005
Hey all,i have a students_table which i want to do a multiple update on.Update student_tableset grant = 35000where course_id = 2There are lots of students in the student table which have course_id of2.I get this error:Subquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used as anexpression.The statement has been terminated.Does anyone know how to do a multiple update like this.It seems such asimple thing but im confused*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jun 29, 2006
Hello all!
Working with SQL 2000. If I create a rollback trigger for a value that can not be less 0. After it rolls back, can I throw a custom error message in my .net application from SQL?
Thanks!
View 5 Replies
View Related
Feb 16, 2007
in SQL query analyzer i have this skeleton test query:
DECLARE @nLen int
DECLARE @strData varchar(200)
DECLARE @strDelim varchar(50)
DECLARE @nPos int
SELECT
OwnersName1
= (IF len(OwnersName) > 0 OwnersName
-- IF dbo.InString(OwnersName,'&',1) > 0 'yes'
--if dbo.InString(OwnersName,' AND ',1) > 0 'yes'
--if dbo.InString(OwnersName,', ',2) > 0 'yes'
--ELSE OwnersName
)
,
OwnersName2 = OwnersName
--@strDelim as Delim
FROM dbo.TateWake
WHERE OwnersName>'9'
i get this error:
Server: Msg 156, Level 15, State 1, Line 8
Incorrect syntax near the keyword 'IF'.
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near 'OwnersName'.
if i replace
IF len(OwnersName) > 0 OwnersName
with: len(OwnersName)
there is no error.
what the heck is going on?
thanks...
View 2 Replies
View Related
Feb 16, 2007
this is my 3rd attempt at posting this. other attempts did not post for some reason. now i'm home from work and so i can't cut and paste. this is from memory.
in query analyzer, i made a ridiculously simple query which returns a syntax error that i can't resolve:
SELECT name1 =
(
IF len(name) > 0 len(name)
),
name2 = name
FROM ownertable
this gives an error something like:
syntax error near IF on line 3
when i remove the IF len(name) > 0
the expression is evaluated as expected with no error. what is going on?
I must apologize for the simplification, but my posts kept going to the ether for some reason. I have had other dba's look at it and no one knows why this is happening in my office. nor can i understand why my posts don't stick. i even got a message from the forum app that i posted a duplicate message!
View 5 Replies
View Related
Dec 21, 2007
Hi,
I am using this query to execute but it didn't
declare @AccountID numeric(3,0)
set @AccountID = 101
select * from AccountTest
WHERE AccountID IN
(CASE
WHEN @AccountID = 101 THEN (100,101)
ELSE @AccountID
END)
I m getting error like
Msg 102, Level 15, State 1, Line 9
Incorrect syntax near ','.
Pls help me out
T.I.A
View 3 Replies
View Related
May 30, 2006
Hello,When I received a message "... See the SQL Server errorlog for details...." I opened Management / SQL Server Logs where I see:Current - 2006-05-30 12:19:00Archive #1 - 2006-05-30 09:49:00Archive #2 - 2006-05-30 08:27:00etc.But each of these logs contains "0 Item(s)". How to see log entries?Thank you very much/RAM/
View 2 Replies
View Related
Feb 27, 2006
I've come across several references indicating that the recovery model can be set to simple by using the following sql statement:
ALTER DATABASE dbname SET RECOVERY SIMPLE
However, all I get is the error message below. What is the correct syntax?
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '.'.
Msg 195, Level 15, State 7, Line 1
'recovery' is not a recognized SET option.
View 7 Replies
View Related
Apr 12, 2007
Hi!
I've a big problem by using the following query :
Code Snippet
public SqlCeResultSet selectRSQuery(String query)
{
SqlCeResultSet resultSet = initializeCommand(query).ExecuteResultSet(ResultSetOptions.Scrollable | ResultSetOptions.Updatable);
return resultSet;
}
SqlCeResultSet resultSet = sgb.selectRSQuery(
"SELECT p.pId, p.pLogin FROM Profiles p, ProfilesGroups pg, Groups g " +
"WHERE g.gId = pg.tpGroupId " +
"AND p.pId = pg.tpProfileId " +
"AND g.gProfileID = '" + app.Settings.Default.id + "'");
It return me this error :
Cannot generate an updatable cursor for the query because there is a non-standard join expression.
What can I do??
Thxx
View 9 Replies
View Related
Aug 22, 2000
Someone asked about this and I was wondering if anyone has any idea.
Thanks in advance.
>>Yesterday in my Windows NT 4.0 Event Viewer I got a message and then I went to the the SQL Server logs and did not find and errors. Microsoft's web site did not have any insite on this issue so I need your help.
>>
>>
>>Category: Kernel
>>17122:
>>initdata: Warning: could not set working size to 259200KB.
>>
>>Please help this seems to be causing some ODBC connection problems to the databases.
View 1 Replies
View Related
Jul 5, 2006
Hi There
I am having a little trouble with something very simple:
I have a stored procedure with the following sql in it:
UPDATE mfsWS_CustNewCustomer SET Result_Id = 0 WHERE QueryGUID = @Guid
IF (@@ERROR <> 0)
BEGIN
RAISERROR ('Error setting Result_Id', 16, 1)
UPDATE mfsWS_CustNewCustomer SET Result_Id = 1 WHERE QueryGUID = @Guid
RETURN
END
To test if this works i SET the Result_Id = 'X' this is a smallint column so this should not work.
My issue is that all i get is the error:
cannot convert char to numeric etc etc
However the @@ERROR logic is not executed , my error is not raised and the update does nto happen, it si as though the entire sp aborts at the point where i try do the bogus update.
Is there something i should SET at the beginning of my sp or something ? How do i ensure that any error will be passed to the logic that checks @@ERROR and performs the appropriate actions ? This is SS2000, so i cannot use try catch.
Thanx
View 10 Replies
View Related
Apr 7, 2008
I have the same error occuring each day at the same exact time on my mirror server. I looked online, and there are tons of references online to people having this issue, but not so many with resolutions. The server is identical to its Primary server in every aspect. It has the same patches, same exact hardware, it was originally going to be a cluster until some other issues turned it into a mirror set, and the Primary doesn't have this issue, just the mirror which is why it doesn't make sense.
Everyday between 17:56:30 and 17:58:30 I get this error
Date 4/6/2008 5:57:56 PM
Log SQL Server (Current - 4/7/2008 12:00:00 AM)
Source spid1s
Message
A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 2361601 seconds. Working set (KB): 147436, committed (KB): 461280, memory utilization: 31%.
There is no plausible reason for this to occur on this particular server and not on the Primary which is doing all the work. I read the blog on PSS about this, as well as some of the MVP blogs. Is there anything else I can look at for this? Some of the existing references I have looked at are below.
http://msmvps.com/blogs/omar/archive/2007/09/19/a-significant-part-of-sql-server-process-memory-has-been-paged-out-this-may-result-in-performance-degradation.aspx
http://blogs.msdn.com/psssql/archive/2007/05/31/the-sql-server-working-set-message.aspx
http://support.microsoft.com/kb/918483/en-us
No matter what I do the problem persists. I gave up on this a while back since it was a mirror only, and I was busy working on other projects, but now that I have a bit of time to look at it again I am going to. Any one got any ideas?
View 8 Replies
View Related
Jan 11, 2002
Hello,
I am getting the following error message when trying to return rows from a table:
The query cannot be executed because some files are either missing or not registered. Run setup again to make sure the required files are registered.
Can anyone tell me how to fix this? I am running SQL Server 2000 on Windows 2000 Advanced Server, SP 2, SQL Server SP2.
TIA,
Chris
View 2 Replies
View Related
Apr 23, 2008
Hi
I am trying to connect to SQL Server Managements Studio. However, I am encountering connection problems. Please help....
Error...
TITLE: Connect to Server
------------------------------
Cannot connect to MSSQL1.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Raj.
View 6 Replies
View Related
Mar 17, 2006
I am trying to copy data from a SQL Server 2000 DB to SQL Server 2005 DB using the import/export wizard in SQL Server Management Studio. The two databases are not identical with different table names and different columns but I thought I had set up all the right mappings and had set the 'Enable identity insert' option. When I ran the wizard it errored at the Pre-execute phase. I simplified the wizard down to one table and only as couple of varchar columns and this also errored in the same way. The error report is detailed below.
For reference the SQL2000(ent. edn) DB is on a windows 2000 server and the SQL2005(dev. edn) DB and the management studio are both on my WinXPSP2 workstation.
Could somebody explain why these errors have occured and more importantly how to rectify the problem?
Many thanks,
Michael.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Warning)
Messages
Warning 0x80047076: Data Flow Task: The output column "DateAdd" (23) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
Warning 0x80047076: Data Flow Task: The output column "DateChg" (26) on output "OLE DB Source Output" (11) and component "Source - tccNewsArticles" (1) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
(SQL Server Import and Export Wizard)
... NOTE: I have removed the rest of the warnings as they were the same as above (many of them).
- Pre-execute (Error)
Messages
Error 0xc0202009: Data Flow Task: An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - Nrs_NewsArticles" (112) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [NereusV2_1].[dbo].[Nrs_NewsArticles] (Stopped)
- Post-execute (Stopped)
- Cleanup (Success)
Messages
Information 0x4004300b: Data Flow Task: "component "Destination - Nrs_NewsArticles" (112)" wrote 0 rows.
(SQL Server Import and Export Wizard)
View 1 Replies
View Related
Apr 22, 2008
So, here is my expression that I use in a textbox on the site header. In the report it just returns error... any ides?
="WareneingangsĂĽbersicht" + " " + today() + " / " +
iif(datepart("WeekdayName",dateadd("d",1,today()))= "Samstag", DateAdd("d",3,today()), DateAdd("d",1,today()))
View 5 Replies
View Related
Jan 11, 2001
Our stored procedure error handling is not working now but did before.
When a severity level 16 (Miscellaneous user error) occurs the batch (stored procedure) exits without processing the next statement which is the error check routine. This is a simple error processing routine and used to work. What could have changed?
I have searched books online and have found nothing on abnormal termination of a SQL batch. I would appreciate some help here.
Loren
View 3 Replies
View Related
