Hi,
I have copied a MS SQL database to my local machine and am testing it
with ASP pages, locally, on IIS. I have a db connect page that keeps
the current connections for the live database. My question is, as the
local db is named 'local,' is there another name I need to give it and
thus call from the connection page?
Also, when copying a db, are the permissions (username and pass)
copied over with it?
Thanks,
Louis
Hi,
I set up DB mirror between a primary (SQL1) and a mirror (SQL2); no witness. I have a problem when I issue command:
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
The error message is:
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy of the database log.
I have the steps below prior to the command. (Note that both servers' service accounts use the same domain account. The domain account I login to do db mirror setup is a member of the local admin group.)
1. backup database DBmirrorTest on SQL1
2. backup database log
3. copy db and log backup files to SQL2
4. restore db with norecovery
5. restore log with norecovery
6. create endpoints on both SQL1 and SQL2
CREATE ENDPOINT [Mirroring]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER)
7. enable mirror on mirror server SQL2
:connect SQL2
alter database DBmirrorTest
Set Partner = N'TCP://SQL1.mycom.com:5022';
go
8. Enable mirror on primary server SQL1
:connect SQL1
alter database DBmirrorTest
Set Partner = N'TCP://SQL2.mycom.com:5022';
go
This is where I got the error.
The remote copy of database "DBmirrorTest" has not been rolled forward to a point in time that is encompassed in the local copy
Thanks for any help,
KT
Hi,
I would like to save a report (.rdl) and work offline with it. Is there a way for doing this without having to install reporting services.
Hi all
Could someone tell me how I create a local copy of an existing database on my machine.
Thanks
Hi there,
i have a test sql server. personal Edition Sp2. i loggoed on with a domain account that is part of local admin group. i was surprised when i found that i don't have enough access to work on the database like create and restore databases
i tried to log on with sa but password not succeeded i don't remember that i had changed the password or put a difficult one.
i also tried from the local administrator i also couldn't get the permission !!
what could gone wrong ? thanks god its only a test server :S
Hi SQL folks,
I've googled for this the whole yesterday and I couldn't find a complete solution.
I'm having a sql2005 database in my development machine and I need to copy all the content "Tables, Diagrams, PK columns and other data" to the remote production machine.
Using the Import/Export method didn't copied the relationships between tables, also it turned the PKs into just a standard columns
Can anyone help?
Hi,
I am trying to test a replication or at least get the feel for it on my local copy before I set it up on the real server.
Can I do that by setting my local database as the publisher as well as the subscriber?
I am getting an error message but I am wondering if there are any settings I can change to make this work. Or any other ideas of how to see the replication tool before actually doing it live?
Error message:
"Server 'MyComputerName' is neither a Publisher nor a Distributor, or you do not have permission to access replication functionality on this server.
I might add that I am not only new to the project but also new to MS SQL Server.
Thank you!
Hi all,
I'm having a problem right now. I'm trying to create an offline copy of a database(live) in my local machine. The database is maintained in a different server machine and I want a copy of the particular DB as an offline copy.
The problem is there's DTS feature in SQL Server 2000 but I don't find any such tool in SQL Server 2005 edition. Can anyone please guide me on how to do this process?
Thanks & Regards,
ThunderRock
Hi All,
I am new to sql server and the database concepts and just started learning. I want to copy a database and local package from a old sql server to a new server. can anybody guide me with the steps? I am very new to this field so if you could give me detailed steps i would very much appreciate it.
thanks in advance,
Here is the connect tring from table properties:ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;WSID=VICRAUCH;DATABASE=vgs_prod;TABLE=d bo.USysCandidatesHere is the connect string from the ADO .Open connect string:"ODBC;DRIVER=SQL Server;SERVER=VICRAUCHSRVRVGSMISC;APP=Microsoft Data Access Components;UID=sa;PWD=xxxXX99X;WSID=VICRAUCH;DATAB ASE=vgs_prod"Here is the ADO .Open code. Set CNN = New ADODB.ConnectionDim strDEFConn As StringstrDEFConn = FixConnStr(DEFCONN)CNN.Open strDEFConn The last line fails with the CNN.Open strDEFConn with this message:Run-time error '-2147467259 (80004005)';[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This code works when the SQL Server is on it's own server, but for testing at my own office, I have SQL Server on the same machine as the Access application. I'm getting the above error where SQL Server and the Access app are on the same machine. I can open a linked SQL table from the user interface, and VBA code that deals with the tables as Access tables works. It is the ADO .Open statement where the error happens. Thanks for any help you can give me on getting this to work.
View 5 Replies View RelatedI created my database on a remote server. It now has lots of tables and stored procedures
When I created it, the server created a schema named for me, the user, so all my tables and stored procedures are named like johndoe.tablename.
I would like to rename the schema to something less personal more professional.
Can it be as simple as "ALTER SCHEMA johndoe RENAME professional"?
Also, I would like to create a local copy of the databse, so I can develop offline, without the 2 second delay.
SQL Server Management Studio Express lets me generate scripts, which I have been using to make backups.
Can I use the script file to recreate the database on my local machine?
Thanks
Hi and thanks in advance for your help.
I have a dilemma and I need some expert help with this. I am trying to make a copy of a remote Database and then replicated the DB and it's contents on my local machine so I can build a test site to run data with. I tried to remot into the server machine but I guess that feature is not allowed by the honest of the remote machine. Since I build on my local machine and would like to be able to test data on my local machine.... I would like to copy the remote DB to my local computer and then I can run my test app on my local server. The version of SQL on the remote machine is SQL Express 2005 and I have SQL 2005 on my machine. Please give me how to accomplish this please.
Dollarjunkie
We currently have a PPTP connection set up for our developers toaccess our development SQL server through a VPN tunnel. When theyneed to copy tables up to the dev SQL from their local machine theysimply do a DTS copy.However, we are now moving to a thin client solution where they willbe working on a terminal server. They will have access to thedevelopment SQL servers and SQL tools such as EM and QA. However,they will not have access to their local SQL server and, therefore,will not be able to directly perform DTS copies. We have exploredseveral possibilities such as exporting tables to a .csv or .mdb fileand then importing them on the development SQL server but this is notideal because things are lost in that process (e.g. primary keys,field names, data types, etc.)My question is this: Is there a way to export and then import SQLtables without losing dependent objects such as primary keys and datatypes in the process? If any of you are working with a similarsituation I would really like to hear how your remote users copyobjects from their remote location to your SQL servers. Thanks!Ryan--Posted using the http://www.dbforumz.com interface, at author's requestArticles individually checked for conformance to usenet standardsTopic URL: http://www.dbforumz.com/General-Dis...pict211310.htmlVisit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbforumz.com/eform.php?p=722630
View 4 Replies View RelatedI have installed the Workstation components on my local PC, which also contains VS 2005 and SQL Express. I installed the WS components so that I could run the full blown version of SQL Management Studio from my PC, to remove SQL 2005 servers.
I tried to update the Workstation components to SP1, but the SP1 package stops at the Setup Support Files, step and terminates claiming the package does not support SQL Express. I realize the package is not intended for Express, I simply need to update Management studio.
I tried running the Post SP1 Tools hotfix and it complains that it will not update SP0 of the tools.
I have successfully updated Express to SP1 and applied the Post hotfixes as well. Is there any way to patch just Management studio on a system with Express installed?
Thank,
Jim
hello all,
I am using vb.net in windows form. I have made a module which is connected to sql server 2000.
Now, I want to have a fresh copy of the remote database of SQL Server at my local computer and whenever there is change in remote database(insertions,deletion or updation), my local database copy may gets synchronized(i.e changes get reflected in this local copy).
Can any one help me? If it is possibel by using Vb.net code, it is very well, and if there is some Sql Server wizard that can help me do that, please reply to me.
Thanks in advance.
I lost my database on my pc as I format my hard drive. Now, how I can get a copy of my ms sql server database from my hosting to work with my local pc? I need to have a local copy so that I can develop my site without internet connection. For your information, I used Hostforlife.eu hosting service. I have searched and tried many methods to do it, but no luck yet. For example, I created a backup on Hostforlife.eu and restore backup file on my pc, but nothing happens. Then I created a new database, and re-created its structure same as the one on Hostforlife, then I used the import wizard to import data from them to my pc. Again, nothing happens.
View 5 Replies View RelatedI am in a situation where I need to get a copy of test database that ison production server running MSSQL 2000 Standard to my local machinerunning MSSQL 2000 personel. I tried to use the copy wizard where itappears I get connected to the source server OK but when I try toindicate the destination server which is my local machine I get errorspoping up about cannot connect to (local) etc.I am NOT a DBA just a programmer trying to get a local test environmentup to be more productive.Lsumnler
View 2 Replies View RelatedHi, The attached code gives the error "One or more errors occured during processing of command"
What I am trying to do is simply copy a table ("inventry") to a new table name ("bob"). Eventually I want to create a new table based on a filter (as i would using the SELECT INTO command in sql)
Note that this is for a foxpro table
OleDbConnection conn = new OleDbConnection();
conn.ConnectionString = "Provider=VFPOLEDB.1;Data Source=C:\test\Inventry.dbf;Password=''";
conn.Open();
OleDbCommand cmd = new OleDbCommand();
cmd.CommandText = "USE Inventry";
cmd.ExecuteNonQuery();
cmd.CommandText = "COPY TO bob";
cmd.ExecuteNonQuery(); // ERRORS HERE!!!!
ive tried a similar thing in VB and get the same error:
Dim cn As New ADODB.Connection
cn.ConnectionString = "Provider=VFPOLEDB.1;Collating Sequence=MACHINE;Data Source=C: est"
cn.Open
cn.Execute ("set null off")
cn.Execute ("USE C: estInventry.dbf")
cn.Execute ("COPY TO C: estBOB WITH CDX") // ERRORS HERE!!!
Any help would be greatley appreciated
Regards,
Shaun
I notice when I copy an SSIS package 'A' to a new package 'B', the new package 'B' will generate a "login failed for user" message in the data flow components. To copy I "save copy of Package 'A' as."
Some config info:
Package ProtectionLevel = EncryptSensitiveWithPassword
Connections are Data Sources
Connection strings with password are stored using PackageConfigurations to an SQLServer table. I've verified Package 'A' is in fact using the config table (e.g. it is not using a password or user stored in the package)
Data connectios are all SQLServer Native OLE DB Client
The account is an SQLServer account (not integrated security)
The original Package 'A' works flawlessly and I get success when I test the connections in Package 'B'.
But executing package 'B' I get: The error message I get is: [Connection manager "MyConnection"] Error: An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'dwuser'.".
Does anyone know why this would occur and/or how to work around it? I saw another thread where a potential workaround is to create a new data flow task and copy all the data flow components to that task. That won't work well for us because the data flow is moderately complex and when you copy and paste it, SSIS completely re-orders the layout.
This is a typical data warehouse ETL setup where there is a master package that executes child packages (e.g. 'A', and 'B' mentioned above) that each perform the ETL for a specific dimension or fact table.
Thanks for any help,
Lee Cascio
I'm a web developer who writes transact-SQL to make my web applications run properly. I'm not real strong in other areas of SQL. Let me explain our set-up and then I'll explain what I want to do:
We have an ecommerce web site and all sales are saved in a SQL Server 2008 R2 database at our hosting company. We also have a local Windows 2012 network that has SQL Server 2014 Express installed.
Here is what I want to do:
I want to copy sales rows from the SQL Server 2008 database at our hosting company and save them in the SQL Server 2014 Express database on our local Windows 2012 server. I'd like to automate this if possible so that it happens each night perhaps. I know there is a way to schedule SQL jobs but I've never actually done this. I also would need to know how to attach to our hosting company DB as well as our local network DB.
I'm using SQL Server Management Studio Express and I'm trying to figure out how to copy a table(s) from my local database to my web hosting database. I know how to do it in 2000, but it's completely different now. Is this feature not allowed on SSMSE? If so, then how do I deploy database tables to a web host?Also, how do you add local database(s) to SSMSE? I tried to use 'attach database' in SSMSE and it wouldn't allow me to navigate to My Documents folder where the database resides. Thanks...
View 8 Replies View RelatedI try to copy database from remote SQL Server(6.5) to our local
SQL Server(7.0). I try this way: First, in Enterprice Manager,
I try "NEW SQL SERVER REGISTRATION" using "Register SQL
Server wizard". The remote server give me the IP, login name
and password. then, I try connect option by "login using
SQL Server". But I got message say:"specialted server not found,
Connection open,create file". some times say:"client server access
denied..." some times say:"timeout". What's going on here?
So, I can not get going on with "Import data wizard".
Does anyone know how to solve this problem? Any answer would be of great assistance!
Thanks
I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.
View 4 Replies View RelatedWe have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.
Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.
Any help is greatly appreciated.
Thanks,
Craig
I am facing a problem in connecting to the local database with server name as (local).
I have installed SQL Server 2005 in my machine. When I try to connect to the SQL server with the server name as SUNILKUMAR I am able to connect but when I try to connect to the same server with the server name as (local) I am not able to connect. SUNILKUMAR is my machine name and SQL server is running locally.
if anyone can help me what is the problem in this case it is highly appriciated.
Hi Everyone
I am at the stage of architecting my solution
My goal is to develop the system on a windows application and pda
There is a central server which will create a publication called inventory
The laptops which host the windows application will be subscribers to the central server using merge replication
The client now wants the PDA using SQL Mobile to synchronize with the local subscirber database on the laptop using active sync. They dont want to do it via WIFI to the IIS Server at the central server
I have been reading for days and I am still unsure whether this is possible to do.
I know Appforge provide a conduit for palm to access synchronization but not local sql databases
I would appreciate your help immensley
Hi!
I did:
alter database mydb set single_user with rollback immediate;
exec sp_detach_db @dbname='mydb', @keepfulltextindexfile='true';
then I tried to copy files to new location on other drives, same server but got
>>Cannot copy <myfile>: Access is denied
Make sure the disk is not full or write-protected and that the file is not currently in use<<
I also tried rename of file without success.
I also tried with db service stoppet (not preferred) without success.
How to find out, which process locks the files?
Best regards
Being a very novice SQL Server administrator, I need to ask the experts a question.
How do I go about moving a database from 1 drive to another? The source drive (C is local to the server, but the target drive (E is on a Storage Area Network (SAN), although it is still a local drive for the server. I want to move the database from C: to E:. Can someone provide me with instructions?
Thanks,
Rick
hi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee
How do I transfer/copy the stored procedures in my Test DB to my LIVE DB? IT won't allow me to export keeps giving me an error.
View 4 Replies View RelatedHello,
if i have a given database (a model) and i want to copy this database in the same database instance. Is it ok to copy the mdf and ldf file and attach the files with a new database name in the same instance.
Or is the datebase name part of the .mdf file?
Regards
Markus
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...